summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for STORYLiNK SAP-G3200U3John Crispin2015-07-248-1/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN. It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons * ethernet switch and USB diag LEDs * UART * GPIOs Tested and not working: * LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?) * failsafe mode (known problem, needs workaround like other MTK based devices) More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46454
* ramips: enable mt76 by default for mt7621Felix Fietkau2015-07-184-3/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46410
* ramips: add support for Planex MZK-DP150NJohn Crispin2015-07-178-0/+135
| | | | | | | | | This patch add support for Planex MZK-DP150N. a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 46405
* ramips: added gpio spi refclk support for wrtnode boardJohn Crispin2015-07-141-1/+1
| | | | | | | | | This syncs the dts file with the one provided by the wrtnode team: https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46359
* ramips: added led support for wrtnode boardJohn Crispin2015-07-141-0/+12
| | | | | | | | | This syncs the dts file with the one provided by the wrtnode team: https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46350
* ramips: adding support for OY-0001 Wireless RouterJohn Crispin2015-07-146-0/+139
| | | | | | | | | | Adding support for OY-0001 Wireless Router. OY-0001 is a wireless router made by oyewifi.com. Below is the details: MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. Signed-off-by: Tom Deng <2579131212@qq.com> SVN-Revision: 46349
* ramips: mt7620 ArcherC20i USB supportJohn Crispin2015-07-141-0/+8
| | | | | | | | | USB port of TP-Link Archer C20i does not work with trunk and CC. This patch adds two nodes (ehci and ohci) to the device tree enabling USB. Signed-off-by: Gunnar Thorburn <gunnar@thorburn.se> SVN-Revision: 46348
* ramips: collect rx related members to fe_rx_ring structFelix Fietkau2015-07-103-58/+69
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 46295
* ramips: add xmit_more supportFelix Fietkau2015-07-102-20/+33
| | | | | | | | | | | | | | | use pktgen to verify on rt3662. can improve transmit rate. pkt_size 1500 burst 1 : 807Mb/sec burst 8 : 984Mb/sec pkt_size 60 burst 1 : 57Mb/sec burst 8 : 236Mb/sec Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 46294
* ramips: a5-v11 board fix power led blinking at bootJohn Crispin2015-07-071-0/+6
| | | | | | Signed-off-by: Konrad Kotowicz <skoti1@go2.pl> SVN-Revision: 46215
* ramips: fix typo in WHR1166D mtd size variableJohn Crispin2015-07-071-1/+1
| | | | | | | | Fix typo in WHR1166D mtd size variable Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> SVN-Revision: 46214
* kernel: update 3.18 to 3.18.17Jonas Gorski2015-06-301-5/+3
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46150
* ramips: refresh patch with USB_MT7621_XHCI_PLATFORMRafał Miłecki2015-06-211-8/+6
| | | | | | | Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46085
* ralink: add support for mt7621 switch countersJohn Crispin2015-06-181-1/+187
| | | | | | Signed-off-by: Cristian Morales Vega <cristian@samknows.com> SVN-Revision: 46050
* ramips: Add Support for the Linksys RE6500John Crispin2015-06-188-1/+148
| | | | | | | | | | This patch adds support for the Linksys RE6500 Range Extender http://wiki.openwrt.org/toh/linksys/re6500 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46043
* ramips: Add support for the D-Link DCS-930 B1John Crispin2015-06-188-0/+130
| | | | | | | | http://wiki.openwrt.org/toh/d-link/dcs-930l Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46042
* ramips: add support for PandoraBox PBR-M1John Crispin2015-06-188-1/+191
| | | | | | | | | This patch is for PandoraBox PBR-M1 which is based on mt7621, all the features work fine, including rtc, leds, button, usb3.0, etc. Signed-off-by: tymon <banglang.huang@foxmail.com> SVN-Revision: 46041
* ramips: fix a bug in the cevt code on mt7620John Crispin2015-06-181-0/+14
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46038
* kernel: update 3.18 to 3.18.16Jonas Gorski2015-06-173-21/+21
| | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46011
* ramips: fix Power LED handling for WHR-300HP2, WHR-600D, WHR-1166DFelix Fietkau2015-06-081-3/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45930
* ralink: add missing symbolJohn Crispin2015-06-071-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45918
* ramips: Add support for RT5350F-OLinuXino V2John Crispin2015-06-057-0/+237
| | | | | | | | | | | Version 2 : White spaces and alphabetical order problems fixed Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info : https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev@gmail.com> SVN-Revision: 45902
* ramips: improve tx clean up and add fe_tx_ring structFelix Fietkau2015-06-053-70/+83
| | | | | | | | | | if there is any new tx need to clean up. do it in next napi poll. collect tx related members to fe_tx_ring struct. for better cache usage and more readable. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 45895
* ramips: change ethernet napi interrupt sequenceFelix Fietkau2015-06-051-5/+4
| | | | | | | | | | when open device. first ready napi software rx. then enable hardware interrupt. final start software tx queue to send data. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 45894
* ramips: fix ethernet vlan tx offload support check when deleteFelix Fietkau2015-06-051-1/+1
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 45893
* ramips: fix the memory map on FireWRTFelix Fietkau2015-06-051-1/+1
| | | | | | | | | | | | | | | Avoid the use of memory marked as reserved MT7621 support 512MB memory. According to "MT7621_ProgrammingGuide_Preliminary_Platform.pdf" 0x0~0x1c000000 448MB 0x20000000~0x4000000 64MB total 512MB Signed-off-by: wengbj <fl.service@t-firefly.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45892
* ramips: use highmem on the FireWRT boardFelix Fietkau2015-06-041-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45890
* ramips: enable highmem support for mt7621Felix Fietkau2015-06-042-8/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45889
* ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues ↵Felix Fietkau2015-06-041-3/+4
| | | | | | | | with kernel_menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45888
* ramips: fix swapped colors for router LED on WHR-1166D (thx, Björn)Felix Fietkau2015-05-301-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45847
* ramips: rename status led to wifi on WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-303-12/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45846
* ramips: fix buttons on WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-293-24/+30
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45845
* ramips: extract MAC address on WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-291-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45844
* ramips: fix partition layout of WHR-300HP2, WHR-1166D, WHR-600DFelix Fietkau2015-05-293-18/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45843
* ramips: implement sysupgrade support for whr-300hp2Felix Fietkau2015-05-291-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45842
* ramips: fix imagebuilderJohn Crispin2015-05-291-2/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45820
* ramips: dont set illacc to y by defaultJohn Crispin2015-05-271-0/+14
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45795
* ramips: diable ill_acc driver by defaultJohn Crispin2015-05-276-0/+6
| | | | | | | | this treacled down via the stable tree and wandered into 3.18.14 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45793
* ramips: check size after paddingFelix Fietkau2015-05-271-1/+1
| | | | | | Signed-off-by: Cristian Morales Vega <cristian@samknows.com> SVN-Revision: 45777
* ramips: fix hang on boot on rt305xJonas Gorski2015-05-251-0/+31
| | | | | | | | | | | Fix an upstream regression on 3.18+ that causes rt305x based devices to hang on boot. Fixes #19715. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45747
* rampis: add support for status led on ASUS RT-N14UJohn Crispin2015-05-231-1/+1
| | | | | | | | | | The diag.sh script lacked an entry for the status led on the RT-N14U, map it to the asus:blue:power led which is also used by the boot loader to report boot status (eg. TFTP recovery mode VS normal boot) Signed-off-by: Matteo Panella <m.panella@level28.org> SVN-Revision: 45725
* ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile RouterJohn Crispin2015-05-238-1/+144
| | | | | | | | | | MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang <atliang@gmail.com> SVN-Revision: 45724
* ramips: fix switch names for several boards in device treeJohn Crispin2015-05-233-4/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45723
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-237-0/+133
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45722
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-2117-95/+89
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* The ability to read MAC addresses from MTD is useful for other targets ↵Imre Kaloz2015-05-031-76/+0
| | | | | | | | besides ramips and lantiq as well. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45596
* kernel: disable INET_LRO by defaultJonas Gorski2015-04-282-2/+0
| | | | | | | | | | | | INET_LRO deprecated and there are exactly two drivers using it, neither being included in any of the targets enabling INET_LRO. At the same time both drivers needing it select it. So just disable it for everyone. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45584
* ralink: the systick clocksource was calculating a bad bogo mips valueJohn Crispin2015-04-211-0/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45554
* ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layoutFelix Fietkau2015-04-192-22/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45507
* ralink: fix cevt-r4k hackJohn Crispin2015-04-101-3/+22
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45342
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 03:13:14 +0000