summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
...
* ralink: add i2c-ralink kmod infoJohn Crispin2013-07-081-0/+15
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37200
* ramips: fix RT-N13U gpio buttonsJohn Crispin2013-07-041-2/+7
| | | | | | | | https://dev.openwrt.org/ticket/13795 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37163
* ramips: update wlan firmware hotplug script for new eeprom sizeFelix Fietkau2013-06-301-7/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37112
* kernel: update linux 3.9 to 3.9.8Jonas Gorski2013-06-3069-725/+84
| | | | | | | | Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103
* ramips: unbreak initramfs generationJohn Crispin2013-06-291-7/+7
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37080
* ramips: fix ethernet driverJohn Crispin2013-06-282-295/+213
| | | | | | | | make sure the driver does not crash under load Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37058
* targets: prepare for supporting normal and initramfs imagesFlorian Fainelli2013-06-271-2/+7
| | | | | | | | | | | | In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049
* ramips: fix rt2x00 ethernet compile bugJohn Crispin2013-06-271-22/+22
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37043
* ramips: add missing symbols to rt288x configJohn Crispin2013-06-271-8/+16
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37042
* ramips: fix ethernet stability issue introduced by recent kernel upgradeJohn Crispin2013-06-271-106/+100
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37041
* ramips: move ESW reset to preinit on RT305x/RT5350John Crispin2013-06-242-12/+4
| | | | | | | | | | | RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet interface, otherwise the driver will panic. As we already init the ethernet in preinit we therefor need to reset the switch before that. Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 37027
* ramips: make rt3883 usb work properlyJohn Crispin2013-06-242-21/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37024
* ramips: revert gpio regulator dts updateJohn Crispin2013-06-246-73/+52
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37021
* ralink: update patchesJohn Crispin2013-06-23205-4325/+64276
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016
* base-files: input/button drivers get loaded before preinit by procdJohn Crispin2013-06-211-12/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000
* base-files: diag does not need to insmod any drivers, procd already did it ↵John Crispin2013-06-211-1/+0
| | | | | | | | for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999
* ramips: add HAME MPR-A2 supportJohn Crispin2013-06-1011-3/+174
| | | | | | | | | | This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898
* ramips: add support for belkin F7C027 wemo/homeautomatisation plugJohn Crispin2013-06-107-0/+151
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 36897
* ramips: set correct description for rt305x subtargetJohn Crispin2013-05-301-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775
* kernel: update linux 3.8 to 3.8.13Gabor Juhos2013-05-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724
* kernel: move CONFIG_MIPS_SEAD3 to genericJonas Gorski2013-05-123-3/+0
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617
* kernel: update linux 3.8 to 3.8.12Gabor Juhos2013-05-086-148/+86
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576
* ramips: drop 3.7 supportJohn Crispin2013-05-07159-40087/+0
| | | | | | Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572
* ramips: properly setup the FEATURES variableJohn Crispin2013-05-072-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571
* ramips: fix memory detection rt5350John Crispin2013-05-061-1/+1
| | | | | | Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568
* ramips: enable dsp extensions for rt305x and rt3883John Crispin2013-05-062-2/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567
* ramips: fix fypo in ethernet driver rt288x, rt3883John Crispin2013-05-061-24/+44
| | | | | | Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565
* ramips: Update ARC Freestation profileJohn Crispin2013-05-063-4/+45
| | | | | | | | | | | | | | | | | | | | | | | | These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564
* ramips: Support setting active_low in devicetree gpio-exportJohn Crispin2013-05-061-26/+63
| | | | | | | | Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563
* ralink: unbreak uart pinmux handlingJohn Crispin2013-05-061-8/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562
* ramips: fix gpio base numberingJohn Crispin2013-05-061-16/+32
| | | | | | | | make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561
* ramips: add gpio base properties to dtsi filesJohn Crispin2013-05-066-0/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560
* ramips: unbreak rt2880 supportJohn Crispin2013-05-066-19/+336
| | | | | | Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559
* ramips: fix DIR-602D1 flash sizeJohn Crispin2013-05-061-1/+1
| | | | | | | | Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558
* ramips: unbreak gpio handling for uart mux groupJohn Crispin2013-05-041-24/+33
| | | | | | | | this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543
* kernel: update linux 3.8 to 3.8.11Gabor Juhos2013-05-011-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507
* kernel: update linux 3.8 to 3.8.10Gabor Juhos2013-04-302-4/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493
* ramips: move dlink profile to correct sub folder - 2nd tryJohn Crispin2013-04-301-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489
* ramips: move dlink profile to correct sub folderJohn Crispin2013-04-301-0/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487
* kernel: update linux 3.8 to 3.8.9Gabor Juhos2013-04-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453
* ramips: rt3883: fix build errorGabor Juhos2013-04-262-2/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451
* ramips: remove now unneeded user-space board detectionJohn Crispin2013-04-251-20/+0
| | | | | | | | | | | | Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436
* ramips: introduce DTS for ALL5003John Crispin2013-04-259-4/+133
| | | | | | | | | | | | | Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435
* ramips: set preinit interface to eth0 by default.John Crispin2013-04-251-0/+12
| | | | | | | | | | | | This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434
* ramips: Add Alpha ASL-26555 support.John Crispin2013-04-2511-0/+328
| | | | | | | | | | | | | | | | This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433
* ramips: Add support of D-link DIR-620D1John Crispin2013-04-259-1/+114
| | | | | | | Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432
* ramips: sync kernel patches with the mips-next treeJohn Crispin2013-04-2558-3232/+1985
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431
* kernel: update linux 3.8 to 3.8.8Gabor Juhos2013-04-192-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363
* fix prepare_generic_squashfsJohn Crispin2013-04-171-4/+0
| | | | | | | | prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349
* fix rt305x gpioJohn Crispin2013-04-161-0/+14
| | | | | | | | https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 15:18:16 +0000