summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/lib/upgrade/platform.sh
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add support for ZTE Q7John Crispin2015-04-011-0/+1
| | | | | | | | | | | | | | | ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 45208
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-161-0/+1
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— SVN-Revision: 44470
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-021-0/+1
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44238
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-221-0/+1
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
* ralink: add support for firewrtJohn Crispin2015-01-201-0/+1
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44055
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-171-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+1
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ralink: add support for Kingston MLWG2John Crispin2015-01-171-0/+1
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43990
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-091-0/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43898
* ramips: fix wsr-1166 sysupgrade supportFelix Fietkau2015-01-031-1/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43816
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-131-0/+1
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 43681
* ralink: add support for WSR-600/1166John Crispin2014-11-141-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43244
* ramips: enable sysupgrade for whr-600d, whr-1166dFelix Fietkau2014-11-081-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43213
* add support for the Linksys E1700Imre Kaloz2014-11-051-0/+1
| | | | SVN-Revision: 43186
* ramips: add support for Airlink101 AR670WJohn Crispin2014-11-031-0/+7
| | | | | | | | | | This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-291-0/+1
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* ramips: add support for Nexx WT3020 devicesJohn Crispin2014-10-201-0/+1
| | | | SVN-Revision: 42983
* ramips: sort boards in upgrade/platform.sh alphabeticallyJohn Crispin2014-10-201-18/+18
| | | | SVN-Revision: 42982
* ramips: add support for Nexx WT1520John Crispin2014-10-101-0/+1
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 42867
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-061-0/+1
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
* ramips: Add support for Omnima MiniPlugJohn Crispin2014-08-181-0/+1
| | | | | | | | This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200
* ramips:support Lenovo AC1200 Wireless routerJohn Crispin2014-08-031-1/+3
| | | | | | | | | Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> SVN-Revision: 41961
* ramips: Add support for VoCoreJohn Crispin2014-08-011-0/+1
| | | | | | | | | This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939
* ramips: add support for Kingston MLW221John Crispin2014-07-261-0/+1
| | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41841
* ramips: fix sysupgrade for asiarf awm003John Crispin2014-07-261-0/+1
| | | | | | | | | Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41837
* ramips: add support for WR8305RT boardJohn Crispin2014-07-121-0/+1
| | | | | | | Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584
* ramips: add support for Zbtlink WA05 routerJohn Crispin2014-07-101-1/+2
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41579
* ramips: add asiarf awapn2403 supportJohn Crispin2014-06-131-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41177
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* ralink: Add support for samsung cy-swr1100 wireless routerJohn Crispin2014-06-021-0/+1
| | | | | | | | | | | | It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40908
* ramips: Support for Teltonika RUT5XXJohn Crispin2014-06-021-0/+1
| | | | | | | | | | | | Hi Hartmut, Thanks for your feedback, I have reformated the patch accordingly. Added support for Teltonika RUT5XX hardware. Signed-off-by: Steffen Weinreich <steve@weinreich.org> SVN-Revision: 40907
* ramips: Add support for the 7Links PX-4885 wireless router.John Crispin2014-04-221-0/+1
| | | | | | | | | | | | | The 7Links PX-4885 is a small battery-powered wireless router. It is based on a RT5350F WiSoC and features one ethernet port and one USB port. It is a Hame MPR-A1 clone, except it has different GPIOs, a different battery and more RAM (32 MB). This patch adds a profile for this board, the corresponding device tree file and the adequate base-files changes (incl. sysupgrade). Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> SVN-Revision: 40554
* ramips: add Airlink101 AR725W userland supportJohn Crispin2014-04-221-0/+1
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40550
* ralink: add support for wrtnodeJohn Crispin2014-03-071-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39786
* ramips: Add userspace support for the Edimax BR-6475nDJohn Crispin2014-01-151-0/+7
| | | | | | | | | The rt2x00 wifi driver may still need updating to function with this device. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39298
* ralink: add HLK-RM04 supportJohn Crispin2014-01-121-0/+1
| | | | | | | | https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39237
* ramips: add support for RT-N14U (mt7620n based) boardJohn Crispin2013-12-251-0/+1
| | | | | | | | | | | | | | | | | added dts file and userspace scripts modified to support Asus RT-N14U board current support status: usb works ethernet works buttons reset, wps leds asus:blue:[usb|lan|wan|air|power] i2c not tested uart not tested wifi not yet Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 39163
* ralink: DIR610A1 Fix remaining issuesJohn Crispin2013-10-071-0/+1
| | | | | | | | | | | | This patch fixes: - Ethernet and Wireless LEDs - Wireless MAC Address - Remove whitespaces from dts file Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 38321
* ralink: add support for dalink dcs930l ipcamJohn Crispin2013-09-191-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38053
* ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350John Crispin2013-09-181-0/+2
| | | | | | | | https://dev.openwrt.org/ticket/14129 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38040
* ramips: add support for dir810l and asus rp-n53John Crispin2013-08-141-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37780
* ramips: add Poray IP2202 supportJohn Crispin2013-08-011-0/+1
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37640
* ramips: add Poray X8 supportJohn Crispin2013-08-011-1/+2
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37639
* ramips: add Poray X5/X6 SupportJohn Crispin2013-08-011-1/+2
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37638
* ramips: add Poray M4 4M/8M supportJohn Crispin2013-08-011-0/+1
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37637
* ramips: add Poray M3 supportJohn Crispin2013-08-011-0/+1
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636
* ramips: add MPR-A1 supportJohn Crispin2013-07-271-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37568
* ramips: Basic support for the AsiaRF RT5350 based AWM002 module and ↵John Crispin2013-07-241-0/+1
| | | | | | | | | | | evaluation board. Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> SVN-Revision: 37521
* ramips: Add support for Huawei HG255D in trunkJohn Crispin2013-07-221-0/+1
| | | | | | | | | | HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them. This patch is tested to work except trivial LED issues. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37505
* ramips: add sysupgarde support for wl-330n3gJohn Crispin2013-07-171-0/+1
| | | | | | | | https://dev.openwrt.org/ticket/13891 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37376
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 12:47:59 +0000