summaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: update to 3.14John Crispin2014-08-1835-0/+16059
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42188
* lantiq: generate unique ARV7519RW22 firmwareJohn Crispin2014-08-185-40/+14
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42183
* lantiq: add support for xrx200 firmware depending on soc typeJohn Crispin2014-08-181-0/+27
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42182
* lantiq: export soc typeJohn Crispin2014-08-181-0/+25
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42181
* lantiq: improve ARV7519RW22 supportJohn Crispin2014-08-182-34/+18
| | | | | | | | | | | | | - use full board name - rename uboot-env partition - add dsl_fw partition - remove unneeded pinmux groups - move gigabit ethernet to LAN - load mac address from mtd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42180
* lantiq: fix dgn3500 and td8970 wifiJohn Crispin2014-07-282-29/+51
| | | | | | | | ath9k failed to come up due to a bad mac addr Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41860
* lantiq: fix dgn3500 ethernetJohn Crispin2014-07-281-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41854
* kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>John Crispin2014-07-201-1/+1
| | | | SVN-Revision: 41776
* lantiq: fix board_id/boardname for VGV7519John Crispin2014-07-161-0/+3
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 41672
* lantiq: vgv7519 add missing wps label to dtsJohn Crispin2014-07-141-0/+1
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 41655
* lantiq: detect board in preinit stateJohn Crispin2014-07-142-2/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41638
* kernel: sort Kconfig options in kernel configsGabor Juhos2014-07-131-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41614
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-101-1/+1
| | | | | | | | found 2 more Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41574
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-101-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571
* lantiq: generate /tmp/sysinfo/lantiq_board_name if missingJohn Crispin2014-07-101-0/+2
| | | | | | | | | | | Run lantiq_board_detect from lantiq_board_name and lantiq_board_model. This was the one thing missing from r41474 for sysupgrade board detection to work properly. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41567
* lantiq: enable SysupgradeNAND for BTHOMEHUBV2BJohn Crispin2014-07-101-0/+10
| | | | | | | | | | | | | | | | | Enables SysupgradeNAND for BTHOMEHUBV2B. Depends on the following patches: http://patchwork.openwrt.org/patch/5817/ http://patchwork.openwrt.org/patch/5848/ http://patchwork.openwrt.org/patch/5851/ Many thanks everyone for your help the last couple of days. Ben Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41566
* lantiq xway: disable gluebi and enable ubiblockJohn Crispin2014-07-101-2/+2
| | | | | | | | | | | | Disables gluebi and enables ubiblock on lantiq xway. Squashfs images on nand use ubifs instead of jffs2 for the overlay. I'll leave the equivalent patch for xrx200 to someone who has a board to test. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41565
* lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg filesJohn Crispin2014-07-021-1/+23
| | | | | | | | | | New make target in lantiq to use UbinizeImage and SysupgradeNand. Only enabled for BTHOMEHUBV2B for the moment but should be useable for other lantiq nand boards. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41474
* lantiq: add support for /tmp/sysinfoJohn Crispin2014-07-025-8/+28
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41472
* lantiq: fix missing symbolsJohn Crispin2014-07-021-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41454
* lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtargetJohn Crispin2014-07-012-2/+2
| | | | | | | | | | | | | Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget. These drivers are not needed for ASE, Danube and AR9. As side effect PHY11G and PHY22F firmwares are not included in the kernel image, which saves 64 KB. Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41449
* kernel: update 3.10.36->3.10.44John Crispin2014-06-261-1/+1
| | | | | | | | 205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41351
* lantiq: remove deprecated jffs2_nand configurationJohn Crispin2014-06-242-9/+1
| | | | | | | | | | | | | | | | | | | | | | As far as I am aware, amongst the lantiq boards, jffs2_nand was only used on the BTHOMEHUBV2B. Ubi-related modifications to the device tree for that board mean that the resulting jffs2 images no longer work, and are no longer required anyway. So I suggest removing the related configuration, which this patch does. If anyone else is using jffs2_nand on a lantiq target please speak up! Incidentally, for a jffs2 rootfs partition concatenated to the kernel image to be recognised and mounted correctly on nand this patch or something equivalent is required: http://patchwork.openwrt.org/patch/5110/ It is marked as accepted in patchwork but doesn't seem to have been committed. As far as I am concerned it too is deprecated. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41312
* lantiq: ubinize autoresize flag for rootfs_dataJohn Crispin2014-06-241-0/+2
| | | | | | | | | Setting this flag allows rootfs_data to expand on first boot to fill remaining free space on nand. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41310
* lantiq: copy rootfs-overlay.ubi to bin/lantiqJohn Crispin2014-06-191-0/+1
| | | | | | | | | At the moment, an rootfs.ubi is copied over to bin/lantiq but rootfs-overlay.ubi is not. This adds it. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41270
* lantiq: refresh patchesJohn Crispin2014-06-194-9/+31
| | | | | | | | this adds ben's ath9k fixup Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41269
* lantiq: DGN3500 (all known variants) factory and sysupgrade image building ↵John Crispin2014-06-171-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | support This patch adds factory image building for the DGN3500, all variants, and fixes sysupgrade images to make them play nice with the sercomm secondary boot loader. The factory images can be used directly in the update dialog in the interface of the stock firmware and via the special Sercomm bootmode and a special windows flashing utility (allegedly present in the CD that came with the device -- but it's also compatible with the NSLU2 Upgrade_207_XP utility.) The special bootmode can be activated by turning the device on while holding the reset button pressed, then releasing it when the power led starts blinking red and green. Please notice that if using the 207 utility, it will always report that the flashing failed even though it completed successfully. Just power cycle the router manually after the utility reports the failure and OpenWRT will boot. This same utility (despite reporting failure in this case too) can revert a DGN3500 (any variant) to the appropriate stock Netgear firmware. This patch is a heavily modified version of a package I found on the OpenWRT forum with a couple fixes and features added -- mainly the generation of all the different image variants to support all known models directly, atm known variants are AnnexA-WW, AnnexA-NA and AnnexB-DE/GR. I tested the patch successfully on my device. Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 41236
* lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition ↵John Crispin2014-06-161-5/+2
| | | | | | | | | | | | | | and rootfs type This patches the BTHOMEHUB2B device tree to make use of the new code for automatic detection of the ubi partition and the rootfs type within it. Gets rid of the ugly alternative bootargs lines. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> Acked-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 41214
* lantiq: fixup vgv7519 usb supportJohn Crispin2014-06-161-1/+1
| | | | | | | | https://dev.openwrt.org/ticket/16800 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41213
* kernel: make sure the new UBIBLOCK symbol does not break buildsJohn Crispin2014-06-112-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41134
* kernel: add a NAND_SUPPORT symbolJohn Crispin2014-06-113-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122
* lantiq: fix eep handling patchJohn Crispin2014-06-051-1/+1
| | | | | | | | 0b79a4a66d17d2c7c12cde8d13637c1b0e5152c2 broke the patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41005
* lantiq: ath5k fix in wifi and ethernet eeprom handling patch.John Crispin2014-06-041-0/+2
| | | | | | | | | | | | | | | ath5k fix in wifi and ethernet eeprom handling patch. Without the line that adds the patch of_ath5k_eeprom_probe cause a kernel panic, at least with the ARV4518PW. Tested only in the modem-router mentioned above. This patch is based in Bruno's hack present in patch #5454. Signed off by: Bruno Rodríguez <bruno.rodriguez.1980@gmail.com> Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 40999
* lantiq: fix up eth_mac and ath_eep supportJohn Crispin2014-06-022-167/+182
| | | | | | | | this patch got messed up by the last rebase Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40948
* lantiq: Fix ARV7510PW22 etopJohn Crispin2014-06-021-1/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40920
* lantiq: Fix ARV4518 etopJohn Crispin2014-06-022-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40919
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* lantiq: strip FCS from received ethernet frames on XRX200Felix Fietkau2014-05-071-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40719
* lantiq: support loading the dsl firmware from a flash partition as a raw ↵Felix Fietkau2014-05-061-5/+27
| | | | | | | | gzipped tarfile Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40715
* lantiq: BT Home Hub 2B - overlayfs on top of ubiJohn Crispin2014-04-224-4/+33
| | | | | | | | BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553
* Fix vr9_phy22f_a2x.bin firmware linkingJohn Crispin2014-04-221-2/+3
| | | | | | | | vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40543
* lantiq: fix maximum ethernet header lengthJohn Crispin2014-04-221-0/+22
| | | | | | | | | | | The total ethernet frame length should be written to the hardware register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This patch fixes network issues on various Danube boards, especially when VLAN tagging is enabled. Signed-off-by: Matti Laakso <malaakso at elisanet.fi> SVN-Revision: 40541
* lantiq: ARV7519RW22: several fixesJohn Crispin2014-04-164-127/+99
| | | | | | | | | | - Fix ethernet ports. - Clean DTS files. - WiFi is lantiq based (not supported yet), remove ath9k. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40519
* lantiq: enable switch on td8970John Crispin2014-04-121-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40498
* Fix ARV7519RW imagesJohn Crispin2014-04-121-6/+6
| | | | | | | | This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40495
* kernel: update 3.10 to 3.10.36Gabor Juhos2014-04-127-28/+20
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467
* lantiq: add an extra partition to the TDW8970 flash that can be used to ↵John Crispin2014-04-111-1/+6
| | | | | | | | store the vdsl firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40461
* lantiq: more vdsl related cleanupsJohn Crispin2014-04-112-10/+23
| | | | | | | | | | | * atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40460
* lantiq: move the dsl-modem config to network.@dsl-modem[-1]John Crispin2014-04-101-0/+32
| | | | | | | | make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40439
* lantiq: make dsl_notify.sh executableJohn Crispin2014-04-091-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40436
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-27 07:37:00 +0000