summaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/base-files/etc
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: fix WBMR-300HPD switch port assignmentFelix Fietkau2016-07-281-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)Oswald Buddenhagen2016-06-223-1/+12
| | | | | | | | | | | | | | | | | | Ethernet, ADSL2+ and LEDs are fully functional. Supporting the two TAE ports and SIP gateway was not attempted. The WiFi is unreliable, due to experimental support for rt35xx family devices by the rt2800pci driver. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [rebase to LEDE HEAD] [switch to normal image instead of brnboot image] [remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out] [remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT] [enable usage of the wireless LED] [fixup mac address configuration] Sgned-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: remove gr7000 supportJohn Crispin2016-06-221-4/+0
| | | | | | this seems to have never worked as the wrong SoC is selected Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: diag - switch off the power led on failsafeMathias Kresin2016-06-201-0/+4
| | | | | | | | | | | | | | This patch is a follow up to commit 4cf3fd4 "add support for indicating the boot state using three leds". At the time of writing the patch, I wasn't aware that it's possible to switch info failsafe after boot (factory reset). Enabling the failsafe led without disabling the running led causes an unexpected led colour on devices using a single multicolour led to indicate the boot state. Signed-off-by: Mathias Kresin <dev@kresin.me>
* Revert "lantiq: Use correct macaddr generating logic for the DGN3500"Felix Fietkau2016-06-151-5/+0
| | | | | | | This reverts commit 492964e741f1e0254b6ed7c0a095551a31d25dc9, which makes no sense. /etc/board.d cannot be used for system init stuff. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add ARV4525PW wifi ledJohn Crispin2016-06-141-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix fritz7320 wifi supportJohn Crispin2016-06-141-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: Add Support for Fritz!Box 7360 SLJohn Crispin2016-06-131-0/+5
| | | | | Signed-off-by: Sebastian Ortwein <krone@animeland.de> Tested-by: Guido Lipke <lipkegu@gmail.com>
* lantiq: add default lan setup to board.d scriptJohn Crispin2016-06-131-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add Buffalo WBMR-300HPD supportFelix Fietkau2016-06-112-0/+14
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: Use correct macaddr generating logic for the DGN3500Daniel Gimpelevich2016-05-271-0/+5
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: VGV7519 - add vlan supportMathias Kresin2016-05-271-1/+2
| | | | | | Add the lantiq,switch property to enable vlans and setup them up. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV4518PWR01 networkMohammed Berdai2016-05-271-0/+4
| | | | | | | | This patch fixes the missing Lan interface config in the file /etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan being down and therefore no way to access the router unless via UART-TTL. Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
* image / basefiles: make console password configurableJohn Crispin2016-04-181-1/+1
| | | | | Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: Fix typo in LED diag script.John Crispin2016-04-261-1/+1
| | | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Acked-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 49242
* lantiq: do not set default firmware fileFelix Fietkau2016-03-071-1/+1
| | | | | | | | | We are now shipping a DSL firmware, do not set it by default to some file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48941
* lantiq: add support for TP-Link VR200vHauke Mehrtens2016-01-181-0/+7
| | | | | | | | | This adds basic support for TP-Link VR200v. Currently the following parts are not working: FXO, Voice, DECT, WIFI (both) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48328
* lantiq: fix VDSL device detection with Linux 4.4Felix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48319
* lantiq: match default xdsl mode and default wan interfaceJohn Crispin2016-01-011-1/+5
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48047
* lantiq: use devicename:colour:function led naming schemeJohn Crispin2016-01-011-4/+4
| | | | | | | | | | | | | | | | The leds of the following boards are not renamed due to lack of manuals/informations: - ARV7519PW - ARV7510PW22 - ARV4510PW The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't match the leds from the manual or pictures (e.g. there shouldn't be a wps led). Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48042
* lantiq: add support for indicating the boot state using three ledsJohn Crispin2016-01-012-54/+16
| | | | | | | | | | | | | | The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to indicate the current boot state. This patch adds support for such cases. The existing led sequences should be the same as before. Boards which are using a led different from power (like TDW89x0) are changed to switch of the led after boot Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48041
* lantiq: use dsl led defined in DTSJohn Crispin2016-01-011-8/+11
| | | | | | | | | | | | | | | | | dsl_control (dsl_notify.sh) is the only process which is aware of the state of the atm/ptm interface. Use the dsl led exclusive for the dsl line state. On boards which don't have a distinct internet and a dsl led, let the netdev status of the atm interface trigger the shared led. Triggering the shared led according to the status of the ppp interface isn't suitable, since the led would be switched of if the ppp connection goes down, but the line is still in sync. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48040
* lantiq: use power leds defined in DTSJohn Crispin2016-01-011-15/+19
| | | | | | | | Use the power leds defined in the dts file instead of hardcoded led names. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48039
* lantiq: use default leds defined in DTSJohn Crispin2016-01-011-20/+7
| | | | | | | | | | | | | Remove all now double defined leds from the led board file. Use pppoe as default for all broadband connections, since it's the default in OpenWrt now. Rename the the wifi leds to make sure, the not applicable default values get overwritten. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48038
* lantiq: BTHOMEHUBV2B - remove missing usb led workaroundJohn Crispin2016-01-011-1/+0
| | | | | | | | The workaround shouldn't be in the default configuration. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48032
* lantiq: Fix LED handling.John Crispin2015-12-171-24/+32
| | | | | | | | | | - Use common OpenWrt blink patterns instead of custom ones - Add preinit_regular hook - Handle the TDW89X0 that does not have a configurable power LED Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 47914
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-112-2/+2
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* lantiq: fix led setup after switch to uci-defaults-new.shJohn Crispin2015-12-111-6/+7
| | | | | | | | | | | | | | | | | | | | | | | The switch to uci-defaults-new.sh revealed a bug in the former used uci-defaults.sh, which failed to add leds with colons in the led name. This bug isn't any longer present in uci-defaults-new.sh and therefore all via DT defined leds will be added to /etc/config/system with their initial on/off state, regardless whether they are already added by the board specific led mappings. This results for a BTHOMEHUBV5A into the following led configuration: - soc:blue:power is added as led_power with the initial state "switched on" - soc:blue:power is added as led_soc_blue_power with the initial state "switched off" With the final result of a switched off power led after boot. The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47850
* lantiq: fix logic error in dsl board.d codeJo-Philipp Wich2015-12-061-1/+1
| | | | | | | | | | | Starting with r47755 the pppoe wan interface section isn't any longer added to the network config on firstboot, using the default configuration. Since the commit message does not mention such a change, I assume that this wasn't intentionally. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47793
* lantiq: get rid of the dsl_fw mtd partitionFelix Fietkau2015-12-051-35/+0
| | | | | | | | | Now that we have redistributable vdsl/adsl firmware blobs in /lib/firmware, we can drop the dsl_fw partition and extend the firmware partition. Signed-off-by: Andre Heider <a.heider@gmail.com> SVN-Revision: 47783
* lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. ↵Felix Fietkau2015-12-041-7/+0
| | | | | | | | loading vr9 drivers Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47764
* lantiq: switch from uci-defaults to board.dJo-Philipp Wich2015-12-043-214/+154
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47755
* lantiq: several ARV7519RW22 fixesJohn Crispin2015-10-052-0/+8
| | | | | | | | | | | | | | Fixes ARV7519RW22 flash register (only 1 flash). Power LED is green, not red. Rename message LEDs to internet. Add LEDs configuration (lan, wan, power). Enable switch VLANs. Fix secondary USB. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 47132
* lantiq: Add target TP-Link TD-W8980John Crispin2015-10-051-1/+1
| | | | | | | | | The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47130
* lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)John Crispin2015-07-072-1/+8
| | | | | | | | lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) Signed-off-by: Jannis Pinter <jannis@pinterjann.is> SVN-Revision: 46224
* lantiq: Add support for the BT Home Hub 5AJohn Crispin2015-07-073-1/+60
| | | | | | | | | | | | | | | u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 46223
* lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)John Crispin2015-06-053-0/+26
| | | | SVN-Revision: 45897
* lantiq: DGN3500 cleanupsJohn Crispin2015-01-181-2/+0
| | | | | | | | | This patch builds on the previous three to streamline support for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44032
* lantiq: Fix initscript issueJohn Crispin2015-01-181-1/+1
| | | | | | | | | Currently this initscript fails if the macaddr has any leading zeroes. This patch corrects the problem. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44029
* Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCKJohn Crispin2015-01-172-1/+10
| | | | | | | | Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
* lantiq: BT Home Hub 3A - userspaceJohn Crispin2015-01-082-1/+6
| | | | | | | | BT Home Hub 3A - userspace Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 43879
* lantiq: Fix adsl led on Home Hub 2BJohn Crispin2015-01-081-1/+1
| | | | | | | | This fixes the adsl led on the Home Hub 2B. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 43876
* lantiq: vgv7519 - set some defaults for ledsJohn Crispin2014-11-141-0/+7
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43256
* lantiq: set default led configuration from /sys entry later, after per board ↵John Crispin2014-11-141-5/+5
| | | | | | | | settings Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43255
* lantiq: vgv7519: fix board_config on dts, read mac address and setJohn Crispin2014-10-291-0/+6
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43109
* lantiq - vgv7519: load rt5362 eeprom from bootloader param patitionJohn Crispin2014-10-061-1/+1
| | | | SVN-Revision: 42824
* Lantiq: fix build warning from dsl_fs scriptJohn Crispin2014-09-161-1/+1
| | | | | | | | | | | fix inclusion of functions.sh in dsl_fs init script without this, the following error is seen during build: ./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> SVN-Revision: 42575
* lantiq: add default switch setup to td8970John Crispin2014-09-151-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42544
* lantiq: improve ARV7519RW22 supportJohn Crispin2014-08-181-1/+1
| | | | | | | | | | | | | - use full board name - rename uboot-env partition - add dsl_fw partition - remove unneeded pinmux groups - move gigabit ethernet to LAN - load mac address from mtd Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42180
* lantiq: add support for /tmp/sysinfoJohn Crispin2014-07-024-5/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41472
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 12:19:53 +0000