summaryrefslogtreecommitdiffstats
path: root/target/linux/generic/patches-3.18
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add at803x fix for sgmii modeFelix Fietkau2016-01-031-0/+96
| | | | | | | | | Some (possibly broken) bootloaders incorreclty initialize at8033 phy. This patch enables sgmii autonegotiation mode. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 48109
* kernel: move at803x phy patch to genericFelix Fietkau2016-01-031-0/+180
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 48108
* kernel: make bcm47xxpart work with TRX flashed at bad block(s)Rafał Miłecki2016-01-022-1/+101
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48061
* kernel: drop bcm47xxpart patch for XiaomiRafał Miłecki2016-01-022-36/+2
| | | | | | | | | It was never tested, most likely not working (because of le32_to_cpu) and not upstreamed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48060
* kernel: add remaining kernel patch accidentally left out of r47963Felix Fietkau2015-12-231-0/+45
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47966
* kernel: backport all current pppoe kernel fixes to 3.18Felix Fietkau2015-12-2310-20/+260
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47963
* ledtrig-netdev: update base driver instead of patching it for every kernelRafał Miłecki2015-12-231-39/+0
| | | | | | | | | | All supported kernels require patching ledtrig-netdev in the same way, so it's safe to just move these changes to the base version of this driver. We needed these patches for some old kernels 2.6.36 and 3.11. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47962
* kernel: revert fq_codel quantum override to prevent it from causing too much ↵Felix Fietkau2015-12-081-5/+2
| | | | | | | | cpu load with higher speed (#21326) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47811
* kernel: add bcm47xxpart patches sent for 4.5 merge windowRafał Miłecki2015-12-074-2/+132
| | | | | | | | | This replaces old bcm53xx patch for scanning whole flash and makes bcm47xxpart compatible with NAND. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47800
* kernel: drop bridge hack for removing ipv6 dependencyJonas Gorski2015-12-041-123/+0
| | | | | | | | | Now that IPV6 isn't build as a module anymore, we don't need to decouple bridge from ipv6 anymore. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47751
* kernel: mvswitch: merge 3.10+ compile fix into the codeJonas Gorski2015-12-041-35/+0
| | | | | | | | | The lowest we support is 3.18, so no need to keep it as a separate patch. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47749
* kernel: backport support for m25p80 compatible="jedec,spi-nor" in DTFelix Fietkau2015-12-031-0/+39
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47716
* kernel: mtd: Backport GD25Q128B support to 3.18Felix Fietkau2015-11-225-4/+19
| | | | | | | | | | | | Support is present in 3.19 and above as kernel commit: fcc87a95195236b0935183361a72e4a98bf577d8 Changes to other existing patches are a result of "make target/linux/refresh". Signed-off-by: Srdjan Rosic <srdjan.rosic@gmail.com> Signed-off-by: Srdjan Rosic <rosic@google.com> SVN-Revision: 47588
* kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe moduleJohn Crispin2015-11-212-0/+220
| | | | | | | | | | | | | * both patches (qcserial/qmi_wwan) were submitted upstream[1,2] * build tested on 3.18 and 4.1 * run tested on imx6 platform with 4.1 1. http://article.gmane.org/gmane.linux.usb.general/132998 2. http://article.gmane.org/gmane.linux.usb.general/133113 Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47567
* kernel: take bcm47xx_nvram.h from kernel and not backportsHauke Mehrtens2015-11-131-0/+52
| | | | | | | | | | | | | | | | | | compat-wireless/backports now contains a bcm47xx_nvram.h file to backport some of the functions in it which are used by the bcmfmac driver. This file just checks for the kernel versions and provide an empty implementations on older kernel versions. This is OK on most systems, but on bcm47xx / bcm53xx systems we want to call the real functions here. This commit removes the file from backports in our build process like we do it with the bcma and ssb header files. Instead we add a recent version into our kernel so all code uses only one header file. On bcm47xx / bcm53xx the real implementations of this code will be used. Reported-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47467
* kernel: update kernel 3.18 to version 3.18.23Hauke Mehrtens2015-11-0111-30/+30
| | | | | | | | | | Changelog: * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47334
* generic: 3.18: refresh patchesLuka Perkov2015-11-012-22/+15
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47329
* generic: fix unrecognized opcode wsbh when building for MIPS16.Felix Fietkau2015-10-311-0/+58
| | | | | | | | | | | | | | | | | | | The issue was found and reported by hynman [1] when compiling reaver for ar71xx (Big Endian MIPS). {standard input}: Assembler messages: {standard input}:79: Error: unrecognized opcode `wsbh $2,$2' {standard input}:90: Error: unrecognized opcode `wsbh $3,$17' {standard input}:208: Error: unrecognized opcode `wsbh $2,$2' make[3]: *** [builder.o] Error 1 The patch was already in upstream since kernel release 4.3-rc5. [1] https://github.com/openwrt/packages/commit/1e29676a8ac74f797f8ca799364681cec575ae6f#commitcomment-12901931 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 47322
* kernel: backport some bcma header file definitions from wireless-testingFelix Fietkau2015-10-301-0/+26
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47284
* generic: add 8139cp fixes, enable hardware csum/tso on 4.0+John Crispin2015-10-191-0/+367
| | | | | | | | | | | | | | | | This contains two sets of fixes for the 8139cp driver. For all kernel versions older than 4.3, we can apply the fixes from the 4.3-rc4 kernel. In particular, these fix the TX timeout recovery which is causing my Geos to lock up until the hardware watchdog kicks in. For 4.0 and later kernels, we can also apply the additional improvements which are going into 4.4 to fix and enable hardware checksum/TSO offload. Backporting those to older kernels is non-trivial. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> SVN-Revision: 47220
* kernel: backport some SPI layer improvements from 4.1 to 3.18, significantly ↵Felix Fietkau2015-09-243-0/+314
| | | | | | | | improves flash speed on ramips Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47045
* kernel: add a patch to fix crashes on pppoe disconnect/reconnectFelix Fietkau2015-09-222-2/+18
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47026
* kernel: fix dependencies of the sock_diag debloat patch (#20544)Felix Fietkau2015-09-181-0/+20
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46997
* kernel: solos-pci: Increase headroom on received packetsFelix Fietkau2015-09-171-0/+54
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46993
* kernel: ipv6: ip6_fragment: fix headroom tests and skb leakFelix Fietkau2015-09-172-1/+102
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46992
* kernel: remove lantiq specific ATM API hacks and their kernel space users ↵Felix Fietkau2015-09-171-14/+0
| | | | | | | | (fixes #20523) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46984
* kernel: properly guard the lantiq atm abi hack with an ifdefJohn Crispin2015-09-161-1/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46981
* kernel: unbreak the atm abiJohn Crispin2015-09-161-7/+7
| | | | | | | | | the lantiq dsl hack to struct atm_trafprm broke the ABI fix this by moving the variables to the end of the struct Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46964
* generic: Fix per interface nf_call_iptables settingFelix Fietkau2015-09-091-179/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that functionality have been disabled - eliminates the overhead of enabling CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization which should reduce/eliminate the overhead for traffic send over bridges on kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization breaks the nf_call_iptables per bridge setting which is more fine grained than the global sysctl net.bridge.bridge-nf-call-iptables setting. A test reflecting a real world setup was created to identify if this really eliminates the overhead and if per-bridge nf_call_iptables could be used in some setups to increase the throughput. A Qualcomm Atheros QCA9558 based system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used. Cables from the AP to the wifi station were used to reduce interference problems during the tests. The wlan interface was put in one bridge interface called br-wlan. This bridge usually contains some more wlan interfaces. The eth0 was put in a second bridge called br-lan. This usually contains some other privileged wlan or mesh interfaces. Routing was added between br-lan and br-wlan. Three kernels were tested: * (default) OpenWrt kernel for this device * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y * (brfilter-local) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and without 644-bridge_optimize_netfilter_hooks.patch The changes to the the netfilter settings of the bridge were done via: * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables A station connected to the wlan0 (AP) interface was used to send traffic to a PC connected via ethernet. iperf with 3 concurrent transmissions was used to generate the traffic. | kernel | br-nf-* global | nf-call* iface | download | upload | |-----------------|----------------|----------------|----------|----------| | default | 0 | - | 209 | 268 | | brfilter-global | 0 | - | 185 | 243 | | brfilter-local | 0 | - | 187 | 243 | | brfilter-local | 0 | br-lan | 157 | 226 | | brfilter-local | 0 | br-lan br-wlan | 139 | 161 | | brfilter-global | 1 | - | 136 | 162 | Download/upload results in Mibit/s It can be seen that the patch doesn't eliminate the overhead. It can also be seen that the throughput of brfilter-global and brfilter-local with disabled filtering is the roughly the same. Also the throughput for brfilter-global and brfilter-local for enabled filtering on all bridges is roughly the same. But also the brfilter-local throughput is higher when only br-lan requires the filtering. This setting would not be possible with 644-bridge_optimize_netfilter_hooks.patch applied and thus can only be compared with brfilter-global and filtering enabled for all interfaces. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46835
* kernel: describe bridge patch "multicast to unicast"Rafał Miłecki2015-09-081-0/+5
| | | | | | It was initially added in r41367 by nbd. SVN-Revision: 46828
* kernel: describe bridge patch "optimize netfilter hooks"Rafał Miłecki2015-09-081-0/+7
| | | | | | It was initially added in r30917 by nbd. SVN-Revision: 46827
* kernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"Rafał Miłecki2015-09-081-0/+13
| | | | | | It was initially added in r27237 by jow as patch from Jonas. SVN-Revision: 46826
* kernel: describe bridge patch "port isolate"Rafał Miłecki2015-09-081-0/+5
| | | | | | It was initially added in r25762 by nbd. SVN-Revision: 46825
* kernel: describe bridge patch "always accept EAP"Rafał Miłecki2015-09-081-0/+6
| | | | | | It was initially added in r26015 by nbd. SVN-Revision: 46824
* kernel: describe bridge patch "no EAP forward"Rafał Miłecki2015-09-081-0/+8
| | | | | | It was initially added in r25095 by nbd. SVN-Revision: 46823
* kernel: restore 640-bridge_no_eap_forward.patch to its original formFelix Fietkau2015-09-081-1/+1
| | | | | | | | | | It was corrupted in r38528. The most obvious symptom is repeated messages like this: Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address Signed-off-by: Dmitry Ivanov <dima@ubnt.com> SVN-Revision: 46821
* kernel: update 3.18 to 3.18.21Jonas Gorski2015-09-023-41/+6
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46768
* kernel: bridge, multicast-to-unicast: fix echoes on STAFelix Fietkau2015-09-021-15/+20
| | | | | | | | | | | | | | | | | | | | | Currently, multicast packets from an STA are sent to any according multicast listener directly through the bridge multicast-to-unicast feature. Unfortunately, so far this includes the originating STA, too, resulting in multicast packets being echo'ed back to the originating STA if it itself is a multicast listener for that group. This behaviour breaks IPv6 duplicate address detection: An IPv6 Neighbor Solicitation for IPv6 Duplicate Address Detection is being echo'ed back, resulting in the host falsely detecting an address collision, which makes the node unable to claim an IPv6 address and use IPv6 in general. Mac80211 unfortunately only prevents the echoes for us for multicast frames. For the multicast frames cast to a unicast destination we'll need to take care of excluding the originator ourselves. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> SVN-Revision: 46765
* kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()Felix Fietkau2015-08-251-19/+26
| | | | | | | | | | A call to pskb_may_pull() might reallocate skb->data. Therefore we should only assign the src-pointer after any potential reallocations. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46721
* Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor ↵Felix Fietkau2015-08-251-20/+17
| | | | | | | | | | | | | | | | | | | | solicitation (#17625)" This reverts commit a080e8e1943156168913d0353a2e99d1151102aa. It did not fix the problem but just hid some symptom. The real issue was that IGMP/MLD report suppression was not considered for the multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD reports between STAs by utilizing AP-isolation and bridge-hairpinning should have fixed this. It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor Solicitations, too (once that feature is configured correctly). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46720
* mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabledJonas Gorski2015-08-231-0/+35
| | | | | | | | | Properly treat -ENOSYS as no PHY, else ehci-orion won't work without generic phy support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46711
* kernel: move linux, part-probe dt parsing in generic codeJohn Crispin2015-08-179-25/+200
| | | | | | | | | | | | | | The "linux,part-probe" dts parsing is a pretty neat generic feature. It has been posted to kernel.org and could easily be reused by all targets. This change moves the patch to the 3.18 and 4.1 generic folders, and makes the feature available to all platforms who may want to use it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46654
* kernel: yaffs2: update to version from 2015-06-02Hauke Mehrtens2015-08-152-44/+6
| | | | | | | | | | In addition to the update this also fixes compile problems with kernel 4.1. This closes #20323. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46609
* kernel: update 3.18 to 3.18.20Hauke Mehrtens2015-08-091-5/+5
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46570
* kernel: cdc_ncm: Add support for moving NDP to end of NCM frameHauke Mehrtens2015-07-251-48/+81
| | | | | | | | | | | | This patch was missing for kernel 4.0 and 4.1 in r46464. I also replaced the version in OpenWrt with the version which went upstream into the Linux mainline kernel. This closes #20193 and #20192 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46493
* kmod-regmap: make regmap-mmio user selectableJonas Gorski2015-07-251-1/+2
| | | | | | | | | | | | | | | REGMAP_MMIO is a hidden symbol, so it cannot be directly selected. If nothing selects it, it will fail the build with: ERROR: module '/store/buildbot/slave/slave/rb532/build/build_dir/target-mipsel_mips32_musl-1.1.10/linux-rb532/linux-3.18.19/drivers/base/regmap/regmap-mmio.ko' is missing. make[2]: *** [/store/buildbot/slave/slave/rb532/build/bin/rb532/packages/base/kmod-regmap_3.18.19-1_rb532.ipk] Error 1 Fix this by adding a description to allow selecting it manually. Fixes: r46451 ("kmod-regmap: enable MMIO support") Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46485
* generic: cdc_ncm: Add support for moving NDP to end of NCM frameJohn Crispin2015-07-241-0/+195
| | | | | | | | | | | | | | | | | | | | | | NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position) and an E3372 device (which mandates NDP to be after indexed datagrams). Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46464
* kernel: fix sched_getaffinity on MIPS SMP systems (fixes enabling RPS/XPS in ↵Felix Fietkau2015-07-181-0/+35
| | | | | | | | netifd with musl) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46420
* kernel: fix build with CONFIG_MTD unsetJohn Crispin2015-07-141-2/+11
| | | | | | | | | | Fixed typo in the patch provided by Hauke: https://lists.openwrt.org/pipermail/openwrt-devel/2015-July/034274.html Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46346
* kernel: update 3.18 to 3.18.18Hauke Mehrtens2015-07-1111-45/+43
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46299
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 17:03:25 +0000