summaryrefslogtreecommitdiffstats
path: root/target/linux/generic/files/drivers/net/phy
Commit message (Collapse)AuthorAgeFilesLines
...
* b53: hardcode reset GPIO for Linksys WRT300N 1.1Hauke Mehrtens2014-07-061-0/+1
| | | | | | | | | | | | According to the thread https://forum.openwrt.org/viewtopic.php?id=48281 b53 uses GPIO 7: [ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7 and causes device to self-reboot. GPIO 8 was found in CFE boot log: "Reset switch via GPIO 8 ..." Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 41526
* adm6996: the GPIO interface for the adm6996l does not support switch statistics.Hauke Mehrtens2014-07-051-2/+9
| | | | | | | | | This patch deactivates the statistics, adds a missing lock initialization and fixes a waring. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41511
* Revert "ar71xx: Fix tagged+untagged operation on AR8327N (#12181)"Jo-Philipp Wich2014-05-241-154/+72
| | | | | | | | | Revert the tagged + untagged rework for now due to regressions in vlan setup on certain AR83xx switches. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 40842
* ar71xx: Fix tagged+untagged operation on AR8327N (#12181)Jo-Philipp Wich2014-05-191-72/+154
| | | | | | | | | | | | | | Replace the global "vlan_tagged" variable with an array storing the tagging state per vlan. The code was taken from #12181, tested and cleaned up by Saverio Proto with additional bug fixes supplied by Álvaro Fernández. Tested-by: Jo-Philipp Wich <jow@openwrt.org> Signed-off-by: Saverio Proto <zioproto@gmail.com> Signed-off-by: Álvaro Fernández <noltari@gmail.com> SVN-Revision: 40777
* kernel: fix warning in swconfig.c with kernel 3.14Hauke Mehrtens2014-05-081-6/+10
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 40733
* linux/generic: add MIB counters and port status to ADM6996 switchJohn Crispin2014-04-222-0/+144
| | | | | | | | | | | | | | This patch adds port status information and MIB counters to the ADM6996 switch driver. The driver supports also the older ADM6996L-variant, but I'm not able to test this patch on that chip. According to the datasheet the same registers exist there as well, so I think it should work, but any feedback is appreciated. Signed-off-by: Matti Laakso <malaakso at elisanet.fi> SVN-Revision: 40542
* revert: kernel: rtl8306: fix max pvid & remove port isolationJohn Crispin2014-03-301-76/+37
| | | | | | | | apparently this one was nt a good idea to merge Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40330
* kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfxJohn Crispin2014-03-301-0/+4
| | | | | | | | | | If the CPU port is not forced up, the link, at least on this board, is lost after changes are applied. This makes sure that the link is restored. Regression tests should confirm it doesn't break other boards. Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40305
* kernel: rtl8306: fix max pvid & remove port isolationJohn Crispin2014-03-301-37/+76
| | | | | | | | | | - hide port pvid - vlan index relation - switch initialises with vlans disabled so port isolation is not used - remove special treatment of cpu port Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40304
* kernel: rtl8306: cosmetic changes for swconfigJohn Crispin2014-03-301-21/+26
| | | | | | | | | | | Changes to: - show the correct "enable_vlan" value under "Global attributes" - show tagged ports under "Vlan: ports" - use get_port_link method to report link status Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40303
* b53: Make b53_switch_init staticJonas Gorski2014-02-221-1/+1
| | | | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4869/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39683
* b53: Add BCM53128 switch supportJonas Gorski2014-02-223-2/+18
| | | | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4867/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39682
* kernel: rtl8306: update reset functionLuka Perkov2014-02-151-7/+2
| | | | | | Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 39589
* ar71xx: swconfig: use the local helper to set LED brightness on link downGabor Juhos2014-01-261-1/+1
| | | | | | | | | | | | Use the 'swconfig_trig_set_brightness' function to set the brightness value of the LED when the link goes down. This ensures that the last brighness value is saved into a local variable which is used to track the actual LED status. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39402
* modules: swconfig.c: update the error path on 3.13, and behave nicely with ↵Zoltan Herpai2014-01-211-3/+2
| | | | | | | | return Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39360
* modules: update swconfig.c to compile on 3.13 (compile-tested)Zoltan Herpai2014-01-211-0/+8
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 39359
* b53: use drvdata to store driver dataHauke Mehrtens2014-01-203-10/+6
| | | | | | | | we should not abuse the platform_data pointer. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39354
* b53: make b53_switch_reset_gpio() staticHauke Mehrtens2014-01-201-1/+1
| | | | SVN-Revision: 39353
* generic: ar8216: add custom LED support for the AR8327 switchGabor Juhos2014-01-202-0/+368
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39338
* generic: ar8216: allow to use chip specific cleanup callbackGabor Juhos2014-01-201-0/+5
| | | | | | | | It will be used for AR8327. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39337
* generic: ar8216: add optimized rmw operationGabor Juhos2014-01-201-20/+44
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39336
* generic: ar8216: Enable jumbo frames on AR8327 by defaultGabor Juhos2013-12-151-2/+2
| | | | | | | | | | This patch enables jumbo frames on AR8327 switch by default. I have tested it on TP-Link TL-WDR3600. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39076
* generic: ar8216: add AR8337N switch supportGabor Juhos2013-11-292-6/+27
| | | | | | | | | | | | | | | | | This patch is needed to use the switch inside the Sitecom WLR-8100; it was unusable and detected as Generic-Phy before. since ar8337 is behaving like ar8327 generally do the same thing see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218 forward-ported to trunk Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4469/ [juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38952
* generic: ar8216: remove trailing whitespacesGabor Juhos2013-11-291-9/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38951
* kernel: b53: fix untagged shift for BCM5365Hauke Mehrtens2013-11-132-4/+8
| | | | | | | | | | | The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38793
* kernel: b53: add initial support for switches in BCM5301XHauke Mehrtens2013-11-102-3/+87
| | | | | | | | This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38712
* kernel: adm6996: add support for ADM6996L and GPIO interfaceHauke Mehrtens2013-11-092-127/+467
| | | | | | | | | | | | | | | | | This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38698
* kernel: make swconfig checkpath compliantFlorian Fainelli2013-10-241-35/+40
| | | | | | | | Fix the warnings and errors reported by checkpatch on swconfig.c Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 38523
* kernel: b53: add switch name into printk when it fails.Hauke Mehrtens2013-10-061-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38307
* kernel: b53: add Register Access Bridge Registers (SRAB) interfaceHauke Mehrtens2013-09-253-0/+388
| | | | | | | | The SRAB interface is used on BCM4707 and BCM5301X SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38198
* kernel: b53: detect revision of BCM5325Hauke Mehrtens2013-09-152-1/+9
| | | | | | | | | The revision is stored in a different register than it is in other Broadcom switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37995
* kernel: b53: fix vlan write for BCM5325 revison 3+Hauke Mehrtens2013-09-151-2/+7
| | | | | | | | | These switches are integrated in some recent BCM53XX and BCM47XX SoCs like the BCM53572. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37994
* kernel: b53: use hard coded switch reset gpio on some boards.Hauke Mehrtens2013-09-141-2/+10
| | | | | | | | | | | | The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37988
* kernel: b53: add soft reset for BCM539x switchesHauke Mehrtens2013-09-142-0/+12
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37987
* kernel: b53: support phy ids for BCM5365Jonas Gorski2013-09-052-2/+28
| | | | | | | | | | | | BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37906
* kernel: b53: allow access the MIB counters on BCM5365Hauke Mehrtens2013-09-041-1/+1
| | | | | | | | | | b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37895
* rtl8367: add support for configuring the VLAN FIDFelix Fietkau2013-08-121-0/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37760
* kernel: b53: use devm_gpio_request_one() to request gpioHauke Mehrtens2013-08-011-3/+4
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37648
* kernel: b53: add support for GPIO resetHauke Mehrtens2013-08-012-0/+43
| | | | | | | | This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37645
* strict_strtoul is obsolete, use kstrtoul insteadJohn Crispin2013-07-271-1/+1
| | | | | | | | based on http://patchwork.openwrt.org/patch/3827/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37562
* brcm47xx: use b53 phy driver for the switch in kernel 3.10Hauke Mehrtens2013-07-141-0/+5
| | | | | | | | | | This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. SVN-Revision: 37304
* generic: add port mirroring/monitoring capability to rtl8366rb switchGabor Juhos2013-06-041-1/+230
| | | | | | | | | | This patch adds swlib attributes to the RTL8366RB switch/PHY found in the TL-WR1043ND router that allow to mirror ethernet packets to a monitor port. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36847
* generic: ar8216: allow to specify SGMII config via platform dataGabor Juhos2013-05-302-3/+28
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36798
* generic: ar8216: add get_port_link callbackGabor Juhos2013-05-301-2/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36797
* generic: ar8216: show chip revision in the kernel logGabor Juhos2013-05-301-2/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36791
* generic: ar8216: add port mirroringLuka Perkov2013-05-242-0/+318
| | | | | | | | | | | | | | | Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both RX and TX traffic from LAN port 1 to LAN port 4: $ swconfig dev switch0 set enable_mirror_rx 1 $ swconfig dev switch0 set enable_mirror_tx 1 $ swconfig dev switch0 set mirror_monitor_port 4 $ swconfig dev switch0 set mirror_source_port 1 Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36713
* kernel: add missing PHY ID for an AR8327 switch variantFelix Fietkau2013-05-131-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36630
* kernel: b53: use correct oops for bcm5365 switchHauke Mehrtens2013-05-091-1/+1
| | | | SVN-Revision: 36589
* generic: fix rtl8366_smi compile warningJohn Crispin2013-04-251-1/+1
| | | | | | | | | drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36442
* fix rtl8366s OF bindingJohn Crispin2013-04-121-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36323
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 02:53:36 +0000