summaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6/files/drivers
Commit message (Expand)AuthorAgeFilesLines
* mvswitch: re-enable header modeFelix Fietkau2009-04-101-1/+1
* atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2...Felix Fietkau2009-03-221-3/+5
* mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware ...Felix Fietkau2009-03-222-52/+40
* generic-2.6: make MyLoader parser compatible with the old partition tablesGabor Juhos2009-01-231-2/+2
* move MyLoader partition parser into generic files, will be used on ar71xxGabor Juhos2008-11-171-0/+178
* improve routing/nat performance for devices using the marvell 88e6060 switchFelix Fietkau2008-10-281-0/+1
* change the way ./files* and the generic kernel files are applied. ./files now...Felix Fietkau2008-10-1821-6155/+872
* make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)Gabor Juhos2008-10-051-3/+3
* modules/gpio_dev: move to drivers/char/ on older kernels as well, and create ...Gabor Juhos2008-08-053-16/+0
* makes ledtrignetdev work on .26 and fix whitespacesJohn Crispin2008-08-041-56/+70
* add missing defines for mvswitchFelix Fietkau2008-07-211-1/+15
* some more mvswitch fixes: - initialize the vlan destination map properly - wo...Felix Fietkau2008-07-191-27/+54
* add extra safety for the packet mangling in the mvswitch driverFelix Fietkau2008-07-191-1/+1
* set marvell switch ATU ageing time to minimum instead of maximum - hopefully ...Felix Fietkau2008-06-092-1/+3
* Remove bogus zero-length ohci-ssb.c in generic-2.6/filesPeter Denison2008-05-181-0/+0
* enable a different pseudo-vlan mode in the marvell switch (uses a proprietary...Felix Fietkau2008-04-292-23/+85
* allow bigger packets in the marvell switch (does not fix the mtu problems yet)Felix Fietkau2008-04-281-0/+6
* fix vlan mapping for cpu port on the marvell switchFelix Fietkau2008-04-241-2/+2
* clear VLANTunnel bit on the marvell switch ports - should help with some brid...Felix Fietkau2008-04-231-1/+0
* Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ an...Felix Fietkau2008-04-202-0/+509
* Add stub driver for ADM6996F switches (configured through MII) The driver cur...Felix Fietkau2008-04-202-0/+275
* move spi_gpio driver into the kernel, clean-up SPI modulesGabor Juhos2008-04-151-0/+242
* modules/gpio-buttons: fix build error on older kernelsGabor Juhos2008-04-081-13/+16
* ssb-mips: Fix IRQ routing on the MIPS core.Michael Büsch2008-04-081-6/+7
* add a polled GPIO buttons input driverGabor Juhos2008-04-071-0/+206
* GPIODEV: Fix open-count race condition.Michael Büsch2008-03-191-7/+14
* add new led trigger for network traffic, fixes #2776John Crispin2008-03-071-0/+437
* ssb: Update to latest upstream version of ssb.Michael Büsch2008-02-196-170/+254
* b43: Make probing of NPHY devices possible.Michael Büsch2008-02-181-0/+2
* "default-on" LED TriggerFelix Fietkau2008-02-021-0/+45
* add userspace tool for gpio_devJohn Crispin2008-01-261-2/+2
* remove binary fileJohn Crispin2008-01-262-372/+0
* add generic gpio char dev for CONFIG_GENERIC_GPIO archsJohn Crispin2008-01-265-0/+582
* LED driver for PCEngines ALIX boardsFelix Fietkau2007-12-141-0/+172
* Forgot removing that file while applying patch from #2757Florian Fainelli2007-12-091-254/+0
* make morse LED trigger available as a package, and fix it to compile with 2.6.23Gabor Juhos2007-10-201-22/+93
* sync ssb with upstreamFelix Fietkau2007-10-1412-297/+691
* back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch ...Felix Fietkau2007-10-131-9/+3
* add patches for 2.6.23 on brcm47xx (not enabled yet)Felix Fietkau2007-10-131-3/+9
* add missing file from [9055]Gabor Juhos2007-09-281-0/+294
* Move SSB out of brcm47xx target into generic-2.6 targetPeter Denison2007-07-0112-0/+4243
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 10:15:10 +0000