summaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: improve support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-292-5/+9
| | | | | | | | | | | | | | | | | | | | This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38949
* ag71xx: add F1E specific feature bit definitions to AR934X register fileGabor Juhos2013-11-291-1/+3
| | | | | | | | | | | | | | | | The F1E Phy (AR8035?) requires additional bits to be set in order to provide a fast and reliable connection over gigabit links. When enabled, the link doesn't suffer anymore from a small package loss under load and the performance is improved quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4460/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38948
* ar71xx: user space support update tl-wr842n_v2 add default led supportGabor Juhos2013-11-291-1/+10
| | | | | | | | | | Small update to uci_defaults/01_leds, to support the usb led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38947
* ar71xx: Kernel support update tl-wr842n_v2 added missing usb ledGabor Juhos2013-11-291-1/+1
| | | | | | | | | | | Just a small oversight my part, added the support for the USB led Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38946
* ar71xx: add profile for the WR842N/ND v2Gabor Juhos2013-11-151-1/+3
| | | | | | | | | | | Patch to add the profile for the TP-LINK WR842N/ND v2 Small update, because of a change in the Makefile. Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4382/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38815
* ar71xx: add user space support for the TL-WR842N/ND v2Gabor Juhos2013-11-155-1/+8
| | | | | | | | | | Patch to add the user space support for the TL-WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4354/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38814
* ar71xx: Add kernel support for the WR842N/ND v2Gabor Juhos2013-11-152-0/+32
| | | | | | | | | | | Patch to add kernel support for the TP-LINK WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4352/ [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38813
* ar71xx: wndr4300: set official mac addressesGabor Juhos2013-11-152-2/+15
| | | | | | | | | | | | | | | | | | Get the factory assigned mac addresses stored in the caldata partition and asign them to lan and wan interfaces. Also put the correct mac addresses into the WiFi eeprom files to ensure that the ath9k driver will use the correct ones. Signed-off-by: Stefan Agner <stefan@agner.ch> Patchwork: http://patchwork.openwrt.org/patch/4350/ [juhosg: - move WiFi MAC address setup to the firmware hotplug file, - use the official MAC address for the 2.4GHz as well, - remove uci-defaults.sh modifications, - update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38812
* ar71xx: Unifi AP Pro sysupgrade patchFelix Fietkau2013-11-141-0/+4
| | | | | | | | | | | | | | | | | | The current implementation of mtd will not append the backup file created by sysupgrade to the correct partition, as mtd will append the data to first jffs2 partition it finds. As the kernel is also stored on a jffs2 partition (which resides before the overlay partition), the data will be appended to this partition. To fix this problem, a new option -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0" is added to mtd. Signed-off-by: Peter Wagner <tripolar@gmx.at> SVN-Revision: 38807
* ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot ↵Felix Fietkau2013-11-141-1/+1
| | | | | | | | loader stop searching after the kernel partition Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38805
* ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boardsGabor Juhos2013-11-111-1/+1
| | | | | | | Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38720
* ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderGabor Juhos2013-11-112-0/+25
| | | | | | | | | Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38719
* ar71xx: add user space support for the TL-WA750RE/WA850RE Range extenderGabor Juhos2013-11-115-0/+32
| | | | | | | | | Patch to add user space support for the TL-WA750RE/WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38718
* ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extenderGabor Juhos2013-11-113-0/+224
| | | | | | | | | | | Patch to add kernel support for the TP-LINK WA750RE and the WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38717
* ar71xx: ag71xx: fix ag71xx_probe error pathGabor Juhos2013-11-111-1/+3
| | | | | | | Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38716
* ar71xx: ag71xx: fix a race involving netdev registrationGabor Juhos2013-11-082-23/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, phy_connect before register_netdev. This is because register_netdev runs the netdev notifiers, which can race with the rest of the initialization in ag71xx_probe. In my case this manifested in two ways: 1) If ag71xx is compiled as a module and inserted after netifd has started, netifd is notified by register_netdev before the call to ag71xx_phy_connect. netifd tries to bring the interface up, which calls ag71xx_open, which in turn enters ag71xx_phy_start. This keys off ag->phy_dev (which is still NULL) and thinks this is a fixed-link board, and enters ag71xx_link_adjust. This looks at ag->speed which is not yet initialized and hits the BUG() in the switch (ag->speed) in ag71xx_link_adjust. This is the wrong code path for ag71xx_phy_start - my board has PHYs that need to be brought up with phy_start. Doing ag71xx_phy_connect before register_netdev ensures that ag->phy_dev is non-NULL before ag71xx_phy_start is ever called. 2) When ag71xx is built into the kernel, and netconsole is enabled, there is a gap in the initial burst of replayed printks right after the netdev comes up. My assumption is that netconsole is also triggered by a netdev notifier, and part of this printk burst happens before the call into ag71xx_phy_connect, so part of the burst is lost while the PHY comes up. This patch fixes the gap - all the printks before eth0 comes up are bursted in full when netconsole initializes. ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the logging has been adjusted accordingly to avoid "unregistered net_device" or "eth%d" messages in dmesg. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38689
* ar71xx: build image for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-072-1/+24
| | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38688
* ar71xx: add user-space support for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-075-4/+23
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38687
* ar71xx: add kernel support for the My Net Wi-Fi Range Extender deviceGabor Juhos2013-11-073-0/+215
| | | | | | | | | | | | | This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38686
* ar71xx: image: add EOF marker to the WNDR4300 UBI imageGabor Juhos2013-11-071-9/+6
| | | | | | | | | | | | | | | Append EOF markers to the END of the UBI image file. This forces the kernel to erase all blocks after the marker even if those blocks are not empty. Additionally, the resulting image can be flashed from the original web UI now, so use '-factory' suffix for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38683
* ar71x: image: don't use the wndr3700 utilityGabor Juhos2013-11-061-28/+14
| | | | | | | | Pass the uImage magic value directly to mkimage instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38662
* ar71xx: image: fix WNDR4300 initramfs image generationGabor Juhos2013-11-051-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38659
* ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfsGabor Juhos2013-11-051-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38658
* ar71xx: generate recovery image for WNDR4300Gabor Juhos2013-11-052-2/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38655
* kernel: update 3.10 to 3.10.18Gabor Juhos2013-11-052-5/+5
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38652
* ar71xx: move WNDR4300 profile to the nand subtargetGabor Juhos2013-11-043-15/+25
| | | | | | | Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38647
* ar71xx: Add new subtarget nand for WNDR4300Gabor Juhos2013-11-043-1/+117
| | | | | | | | | | | | | | | | | | | | | | | | | Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs. This target will be used for NAND based router which make use of UBI (and maybe UBIFS later on) in order to provide proper NAND support. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - tweak target.mk: change BOARDNAME variable, improve Target/Description, remove targz and ubifs from FEATURES and add broken flag, - optimize kernel configuration: disable ubifs, it is not used yet, disable unused MTD options, disable SPI support disable unused network drivers, tune kernel command line, - remove image/ubinize.cfg, it will be in a follow-up patch - move profile modifications into a separate patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38646
* ar71xx: remove yaffs from the generic rootfstype listGabor Juhos2013-11-041-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38645
* ar71xx: image: dd root.* images in fs specific macrosGabor Juhos2013-11-041-3/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38644
* ar71xx: image: only define profiles for the generic subtargetGabor Juhos2013-11-011-1/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38636
* ar71xx: image: add IMAGE_PROFILE variableGabor Juhos2013-11-011-3/+5
| | | | | | | | | Ensures that the 'Default' images are generated even if the subtarget has no profiles. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38635
* ar71xx: always enable hw ecc support for the ar934x-nfc moduleGabor Juhos2013-11-011-1/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38634
* kernel: add missing config optionsHauke Mehrtens2013-11-011-1/+0
| | | | | | | | The buildbots found some new missing config options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38633
* ar71xx: move subtarget specific features to target.mkGabor Juhos2013-10-303-1/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38600
* ar71xx: don't build uImages for the mikrotik subtargetGabor Juhos2013-10-301-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38598
* ar71xx: disable non Mikrotik boards in the mikrotik subtargetGabor Juhos2013-10-301-0/+82
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38597
* ar71xx: fix Kconfig symbol selection for RB95x/RB2011Gabor Juhos2013-10-309-14/+17
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38596
* ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget configGabor Juhos2013-10-302-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38595
* ar71xx: add profile and build image for the BXU2000n-2 A1 boardGabor Juhos2013-10-302-0/+19
| | | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - remove MultiProfile, it makes no sense for a single board - move SingleProfile call and the mtdlayout to a different location keep things sorted (well, almost)] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38593
* ar71xx: add user-space support for the BXU2000n-2 A1 boardGabor Juhos2013-10-304-0/+11
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38592
* ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 boardGabor Juhos2013-10-303-0/+160
| | | | | | | | | | | | | | BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip. Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - rename and refresh kernel patch, - fix some checkpatch warnings and adjust whitespaces in mach-bhu-bxu2000n2-a.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38591
* ar71xx: add user space support for the Sitecom WLR-8100 wireless routerGabor Juhos2013-10-303-1/+8
| | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4148/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38590
* ar71xx: add kernel support for the Sitecom WLR-8100 wireless routerGabor Juhos2013-10-303-0/+262
| | | | | | | | | | | | - unsure about copyright message - based on AP136-010 Patchwork: http://patchwork.openwrt.org/patch/4147/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38589
* ar71xx: add profile and build image for the Dragino2 boardGabor Juhos2013-10-302-0/+19
| | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: remove kernel+rootfs partition and use uimage split instead] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38588
* ar71xx: add kernel support for DRAGINO2Gabor Juhos2013-10-303-0/+167
| | | | | | | | | | | | | | | | | | | This patch adds support for DRAGINO2 board (used by Meshpotato v2). Most of the files included can be found in the official svn repository provided by the company [1]. I have just adapt it to the last OpenWrt trunk revision (Fri Oct 4 10:49:47 2013). 1. http://svn.dragino.com/dragino2 Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: - rename and refresh kernel patch, - fix checkpatch warnings in mach-dragino2.c] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38587
* ar71xx: rename 'nand' subtarget to 'mikrotik'Gabor Juhos2013-10-236-3/+3
| | | | | | | | | | | | | It is for Mikrotik devices only, rename the subtarget to reflect that. Also fix the wget2nand script to use the new image names. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38509
* ar71xx: change title and description for NAND subtargetGabor Juhos2013-10-231-3/+3
| | | | | | | | | | | | The nand subtarget supports Mikrotik boards only. Change the title and the description to reflect that. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38508
* ar71xx: remove 'Target/Description' from main MakefileGabor Juhos2013-10-231-4/+0
| | | | | | | | | | | | Ensure that menuconfig shows the correct help text for subtargets. Based on the patch by Stefan Agner: http://patchwork.openwrt.org/patch/4123/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38507
* kernel: update 3.10 to 3.10.17Gabor Juhos2013-10-232-9/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506
* ar71xx: Fix sysupgrades for Allnet and OpenMesh devicesGabor Juhos2013-10-202-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Both Allnet and OpenMesh sysupgrade uses fw_setenv from uboot-envtools to change different settings in the uboot environment. uboot-envtools version 2013.01 introduced a filesystem lock "/var/lock/fw_printenv.lock" to guarantee mutually exclusive access to the uboot environment. But the path /var doesn't exist on the sysupgrade ramfs. An upgrade on these devices fails since r36033 ("[package] uboot-envtools: upgrade to version 2013.01.01") with following messages: Error opening lock file /var/lock/fw_printenv.lock failed to update U-Boot environment Creating the "/var/lock" path before running fw_setenv is therefore a requirement unless the locking functionality in fw_setenv is removed or replaced with optional locking. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38483
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 01:01:59 +0000