summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: TEW-692GR: fix switch and wirelessMathias Kresin2016-08-202-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AR8327 initvals were not copied to the DTS during the switch from mach file to device tree and broke the switch on the device. The former used PORT6 related initvals were wrong and have been corrected. The phy mode setting for the switch was missing in the DTS as well. The wireless requires an eeprom to work. The dual band wireless chips have both bands enabled by default but only one band per chip is working. The stock firmware uses the following mac addresses: LAN: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 5 GHz: AA:BB:CC:DD:EE:E8 Assuming the mac address range :E4 to :E8 is reserved for this device, the MAC addresses were reorder to have a unique MAC address for each interface: LAN: AA:BB:CC:DD:EE:E4 2.4GHz: AA:BB:CC:DD:EE:E4 WAN: AA:BB:CC:DD:EE:E5 5 GHz: AA:BB:CC:DD:EE:E8 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: rt3883: fix dtc compiler warningMathias Kresin2016-08-201-0/+2
| | | | | | | | | | Fixes the following compiler warning: Warning (reg_format): "reg" property in /ethernet@10100000/port@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /ethernet@10100000/port@0 Warning (avoid_default_addr_size): Relying on default #size-cells value for /ethernet@10100000/port@0 Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: generate switch configuration for BTHOMEHUBV2B.Sigurd Hogsbro2016-08-201-1/+8
| | | | | | | Split from HH3A as it appears to have a different switch. https://en.wikipedia.org/wiki/BT_Home_Hub#Models_and_technical_specifications Signed-off-by: Sigurd Hogsbro <sigurd@hogsbro.org>
* archs38: Merge sd and ramfs subtargets in generic againAlexey Brodkin2016-08-207-36/+13
| | | | | | | | | | | | | | As it turned out we may actually build both initramfs and SD-based images in one run with just a small tweak in existing image/Makefile and so we do here. We're back with one "generic" target for all ARC HS38-based bords. Kudos to John for his patience and very helpful tips! Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jo-Philipp Wich <jo@mein.io>
* ltq-deu: fix cra_priorityMartin Schiller2016-08-209-8/+25
| | | | | | | | | | With the default priority of 0, the DEU algos would be overlapped by the generic algos (if available). To fix this, set the cra_priority of the hardware algos to the recommended value of 300/400. Signed-off-by: Martin Schiller <mschiller@tdt.de>
* ltq-deu: fix handling of data blocks with sizes != AES/DES block sizeMartin Schiller2016-08-202-44/+108
| | | | | | This fix is a backport from the lantiq UGW-6.1.1-MR1 Signed-off-by: Martin Schiller <mschiller@tdt.de>
* ltq-deu: fix aes initialization vector handlingMartin Schiller2016-08-201-4/+4
| | | | | | This fix is a backport from the lantiq UGW-6.1.1-MR1 Signed-off-by: Martin Schiller <mschiller@tdt.de>
* toolchain: include yasm in x86 toolchainDaniel Golle2016-08-193-1/+72
| | | | | | | Some libraries require yasm to build with in-line assembly for x86 targets. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: set preinit interface in /etc/board.d/02_networkDaniel Golle2016-08-192-7/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: replace cosmetic UBIFS patches with what went upstreamDaniel Golle2016-08-194-53/+26
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: update copy of ASM entry flushing whole D-cacheRafał Miłecki2016-08-192-30/+45
| | | | | | | | | | | Previous version was based on code from kernel 2.6.22 with Broadcom two trivial modifications. This updates the copy to the version from current kernel and refreshes the patch. This was tested for regressions on Netgear R6250 (BCM4708A0), D-Link DIR-885L (BCM4709C0) and Tenda AC9 (BCM47189B0). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: build Tenda AC9 imageRafał Miłecki2016-08-191-1/+1
| | | | | | | | We finally got kernel booting on this device and LAN ports are working, so it won't "brick" the device. One more big missing thing is WAN port support. It requires fix for BCM53125 to get switch port 5 working. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: switch back to standalone ASM entry flushing cacheRafał Miłecki2016-08-193-86/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Over a year ago in a commit ac96a1665ac7 ("bcm53xx: update Disable MMU and Dcache during decompression") we switched to Florian's patch for workarounding CFE bug. The main difference was using a part of existing __armv7_mmu_cache_flush instead of implementing flushing separately. This worked well for Northstar devices but doesn't work for BCM53573 as these devices simply don't start booting with Florian's patch. It's because of the ldmfd ASM instruction in the __armv7_mmu_cache_flush. So this commit switches back to using standalone implementation. This time instead of copying Broadcom's copy of cache-v7.S, we just make a copy of the original file on our own. Unfortunately we can't cross-dir compile cache-v7.S from ../../mm/ as that one also adds __INITDATA with define_cache_functions v7 which would just trigger > Error: unrecognized/unsupported machine ID (r1 = 0x0000007f). The only real change Broadcom did in copied .S file was modifying mcr instruction to use c6 instead of c14. It isn't clear to me if we really need it, but let's use it for now. By the way we also update commit message of the [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression This makes kernel booting on BCM53573 successfully. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: package drivers for Northstar USB PHYsRafał Miłecki2016-08-191-0/+37
| | | | | | | We don't use them yet as we still init PHY in controller driver but they will be needed soon. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: check the right directories for rebuildJonas Gorski2016-08-191-1/+1
| | | | | | | | | | | | Pass KERNEL_FILE_DEPENDS to rdep instead of PKG_FILE_DEPENDS, which is empty. Also don't pass $(CURDIR) as the directory to timestamp, as it would also pick up non kernel related changes like image building code. Should fix kernel being rebuild for unrelated changes, as well as not being rebuild for changes in target/linux/generic. Fixes: 22ef1c83b35c ("kernel: make the kernel build auto-clean the build dir like package build") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* tools: Select dosfstools for archs38Alexey Brodkin2016-08-181-1/+1
| | | | | | | | | | | | | | | | | In commit df4f41261cf9 ("archs38: Introduce images for SD-cards") we introduced building of SD-card images for ARC HS38-based boards. While building images mkdosfs utility is used. On machines I used for testing mentioned change this utility was already installed so I didn't figure-out that requirement. But thanks to Lede's autobuilder this missing bit was highlighted, see failed build job here: http://phase1.builds.lede-project.org/builders/archs38%2Fsd/builds/0/steps/images/logs/stdio Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
* busybox: enable sha256sum by defaultJo-Philipp Wich2016-08-182-2/+2
| | | | | | | Now that snapshot builds are only publishing SHA-256 checksums, it makes sense to ship an appropriate utility for verification. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bcm53xx: generate proper network config for Tenda AC9Rafał Miłecki2016-08-181-0/+10
| | | | | | | It's a more complex device with 2 interfaces on the SoC, one we can use for LAN and another for WAN. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mvebu: fix boot stalls on WRT1900AC V1John Crispin2016-08-181-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ppp: Extend uci datamodel with persistency sypportHans Dedecker2016-08-182-3/+13
| | | | | | | | | | | | | | | | | | | | PPP daemon can be put into persist mode meaning the daemon will not exit after a connection gets terminated but will instead try to reopen the connection. The re-initiation after the link has been terminated can be controlled via holdoff; this is helpfull in scenarios where a BRAS is in denial of service mode due to link setup requests after a BRAS has gone down Following uci parameters have been added : persist (boolean) : Puts the ppp daemon in persist mode maxfail (integer) : Number of consecutive fail attempts which puts the PPP daemon in exit mode holdoff (interget) : Specifies how many seconds to wait before re-initiating link setup after it has been terminated Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: add support for Zbtlink ZBT-WE1526Piotr Dymacz2016-08-1812-1/+191
| | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: prevent adding custom string to localversionJosua Mayer2016-08-181-0/+1
| | | | | | | | | When the kernel build picks up a localversion file in the source tree, that string is unconditionally appended to LOCALVERSION and affects the uname string. Make sure to delete any such file. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* kernel: prevent addition of scm marker to localversionJosua Mayer2016-08-181-0/+4
| | | | | | | | | When building the kernel from a git repository, the kernel build appends either a + or a short commit hash to localversion. This behaviour can be prevented by passing the empty LOCALVERSION variable to make. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* mtd: fix building with glibcJosua Mayer2016-08-181-0/+1
| | | | | | | | src/linksys_bootcount.c misses to include stdint.h. Apparently musl doesn't mind and includes this header by default, but glibc does not and causes the build to fail. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* u-boot-envtools: fix building with glibcJosua Mayer2016-08-181-0/+13
| | | | | | | | tools/env/fw_env.c misses to include stdint.h. Apparently musl doesn't mind and includes this header by default, but glibc does not and causes the build to fail. Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
* ipq806x: sync with latest patches sent by QCAJohn Crispin2016-08-1811-93/+1350
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ubox: fixes segfault inside kmodloaderJohn Crispin2016-08-181-2/+2
| | | | | | null pointer deref when no modules folder was present Signed-off-by: John Crispin <john@phrozen.org>
* kernel: bgmac: add support for BCM53573Rafał Miłecki2016-08-182-11/+171
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bgmac: fix regression in MII registrationRafał Miłecki2016-08-181-0/+29
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bgmac: backport 3 remaining small fixesRafał Miłecki2016-08-173-0/+95
| | | | | | This makes bgmac in sync with upstream verison. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bgmac: backport patch adding platform supportRafał Miłecki2016-08-173-25/+1289
| | | | | | It also reworks bcma support by moving specific code to separated file. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bgmac: backport patch switching to feature_flagsRafał Miłecki2016-08-173-5/+451
| | | | | | | It was needed upstream to avoid bcma references in the main code. To match this new code our patch adding SRAB was also updated. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* archs38: Introduce images for SD-cardsAlexey Brodkin2016-08-1613-80/+132
| | | | | | | | | | | | | | | | | | Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org>
* archs38: Remove MMC kernel modules, they are built-in nowAlexey Brodkin2016-08-162-2/+2
| | | | | | | | If we want to boot from SD-card we need to have corresponding drivers already built-in so there's no point in having these modules. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* archs38: Update kernel configurationAlexey Brodkin2016-08-161-2/+9
| | | | | | | | | | | | | | Now when we're switching to FS on SD-card it's necessary to have full stack of MMC block & FC drivers built-in otherwise kernel won't be able to mount FS with needed modules. Also we enable parsing of input parameters passed to the kernel by U-Boot. Otherwise kernel won't know where to look for command line and what's worse device tree blob (we had to disable this by default for cases when kernel is loaded by JTAG and core registers may have undefined state lading to kernel going bonkers). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* archs38: Reduce generalizationAlexey Brodkin2016-08-161-23/+11
| | | | | | | | | | | | | | As support of ARC HS38 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_archs38_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: use patched .dts from sourcesAlexey Brodkin2016-08-1613-943/+194
| | | | | | | | | | | | | | Instead of using off-the-tree .dts files for ARC boards we're switching to use in-tree ones. And for that to work properly we apply upstream patch that adds currently missing "model" property. Upstream patch and discussion could be found here: http://lists.infradead.org/pipermail/linux-snps-arc/2016-August/001394.html Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: John Crispin <john@phrozen.org>
* tools/tar: Bump to 1.29Alexey Brodkin2016-08-162-19/+2
| | | | | | | | | This change updates tar from 1.28 to 1.29. Among other changes following commit http://git.savannah.gnu.org/cgit/tar.git/commit/lib/xattr-at.c?h=9c2b57232e3bc2e5ba85387560bcdd851849a128 substitutes previously used off-the-tree patch 100-fix_xattr_disable.patch Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* ath9k: switch to using mac80211 intermediate software queuesFelix Fietkau2016-08-174-6/+950
| | | | | | | Provides a nice latency reduction under load, due to mac80211's fq_codel support. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport bgmac patch moving MDIO code into separated fileRafał Miłecki2016-08-172-9/+685
| | | | | | This prepares bgmac for the biggest change: dropping bcma dependency. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport simple bgmac cleanup & fix from JonRafał Miłecki2016-08-163-5/+524
| | | | | | | These 2 trivial patches will be followed by a bigger bgmac rework so they are worth backporting in a separated patch. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add BCM53573 flash fix sent upstreamRafał Miłecki2016-08-161-0/+57
| | | | | | | This fixes flash corruptions. It touches bcm47xxsflash driver shared between brcm47xx and bcm53xx so put it in generic. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update bgmac by adding Florian's upstream changesRafał Miłecki2016-08-165-4/+202
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* swconfig: revert the portmapping patches, they seem to cause a segfaultJohn Crispin2016-08-168-1/+228
| | | | | | | | | | | | Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig" This reverts commit 675407baa44a8700de20b6b2857009a552a807ba. Revert "swconfig: remove obsolete portmapping feature" This reverts commit fca1eb349ef31b133a62880cbd562d6bf17500aa. Signed-off-by: John Crispin <john@phrozen.org>
* bcm53xx: fix warning caused by m25p80 patchRafał Miłecki2016-08-161-5/+2
| | | | | | | | | | It was adding unused variable: drivers/mtd/devices/m25p80.c: In function 'm25p80_write': drivers/mtd/devices/m25p80.c:85:6: warning: unused variable 'i' [-Wunused-variable] int i; ^ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: support watchdog (and so reboot) on BCM53573Rafał Miłecki2016-08-161-0/+104
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq/xrx200-net: Add support for eth0 as WAN interfaceMartin Schiller2016-08-151-1/+1
| | | | | | | | Use priv->wan instead of priv->id as indicator if packets should go to the Ethernet WAN group (DPID=1) or not (DPID=0). This way, it's independant of interface names or indexes. Signed-off-by: Martin Schiller <mschiller@tdt.de>
* kernel: add kmod-squashfsMatteo Croce2016-08-151-0/+16
| | | | | | add kernel package to build squashfs as module when it's not the root filesystem Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
* lantiq: add kmod-ledtrig-usbdev to device packages which have usb ledMatti Laakso2016-08-151-5/+5
| | | | | | | | By default USB LEDs are associated with usbdev trigger. However, not all devices which have USB LEDs have kmod-ledtrig-usbdev in their list of default packages. Add it to the relevant devices. Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
* libs/gmp: update to 6.1.1Hannu Nyman2016-08-151-2/+2
| | | | | | Update libgmp to 6.1.1 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 02:22:35 +0000