summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-219-0/+207
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
* odhcpd: fix DHCPv6 downstream PDSteven Barth2015-05-211-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45707
* generic/4.0: fix error during kernel patch applicationSteven Barth2015-05-201-10/+3
| | | | | | | | | | | | | | | | | | | | Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression during patch application on the 4.0 kernel. Some of the patched content doesn't match the actual code, therefore leading to the following error: Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch patching file net/ipv6/ip6_output.c Hunk #1 FAILED at 886. 1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c patching file net/ipv6/route.c Hunk #1 succeeded at 2247 (offset 2 lines). Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f) This change just adapts the actual patch to fix what is in kernel 4.0 and make it apply cleanly. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45705
* mvebu: supress useless in-cpu rtc init on the MambaImre Kaloz2015-05-191-0/+14
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45704
* tools/mkimage: backport gcc5 compatibility, patchHauke Mehrtens2015-05-191-0/+93
| | | | | | | | | | | | | | | | | | | | | Fedora 22 includes gcc5 by default build leads to error: include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc5.h: No such file or directory backport upstream patch: "Add linux/compiler-gcc5.h to fix builds with gcc5" id: 478b02f1a7043b673565075ea5016376f3293b23 Issue was reported at https://forum.openwrt.org/viewtopic.php?id=56853 & replicated in a VM created, flashed and tested ar71xx image successfully as test Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 45703
* base-files: fix default pre-/postrm for packages with a dotJonas Gorski2015-05-191-2/+2
| | | | | | | | | | | | | Instead of stripping everything after the first dot, strip everything after the last dot. This fixes pre-/postrm actions for packages with a dot in their name, like libusb-1.0. Fixes #19668. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45702
* netifd: improve IPv6 onlink-route handlingSteven Barth2015-05-191-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45701
* ipv6: remove now unneeded source-dest-routing workaroundsSteven Barth2015-05-199-37/+19
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45700
* linux: backport IPv6 SAS fixes for source-specific routesSteven Barth2015-05-192-0/+202
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45699
* rpcd: unload package after uci revertsJo-Philipp Wich2015-05-171-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 45695
* bcm53xx: add Asus RT-AC87U partitioning hacky workaroundRafał Miłecki2015-05-171-0/+47
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45694
* dnsmasq: bump to dnsmasq2.73rc8 Important.Steven Barth2015-05-171-2/+2
| | | | | | | | | | Bump dnsmasq to v2.73rc8 Important - fixes remotely exploitable buffer overflow introduced in all v2.73 test/release candidates. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> SVN-Revision: 45693
* bcm53xx: try to fix network on Asus RT-AC87URafał Miłecki2015-05-162-7/+16
| | | | | | | | | | | | | | | | | | | This device seems to have switch port 7 connected to the CPU: vlan1ports=1 2 3 5 7* vlan2ports=0 7u it should be handled by eth1 and NVRAM seems to confirm that (no et0macaddr entry, existing et1macaddr & et1phyaddr entries). One of the remaining ports (4/8?) may be connected to the Quantenna SoC. Original firmware boot log contains following messages: (0x00,0x5d)Port 5 States Override: 0xfb (0x00,0x5f)Port 7 States Override: 0xfb (0x00,0x0e)Port 8 States Override: 0x0a (why does it force port 5 state?!) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45692
* bcm53xx: use backported Asus RT-AC87U DT patchRafał Miłecki2015-05-164-12/+65
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45691
* bcm53xx: enable RT-AC87U UART consoleRafał Miłecki2015-05-161-0/+21
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 45690
* map: set ealen to psidlen for lw4over6Steven Barth2015-05-162-1/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45689
* odhcp6c: fix parsing of LW4over6 parametersSteven Barth2015-05-161-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45688
* bcm53xx: add support for SmartRG SR400acRafał Miłecki2015-05-134-2/+50
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45686
* bcm53xx: replace DT patches with backports from stblinuxRafał Miłecki2015-05-1310-72/+329
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45685
* bcm53xx: use of_machine_is_compatible helper in b53 fixRafał Miłecki2015-05-131-8/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45684
* bcm53xx: fix "typo" in b53 patch fixing R8000 CPU portRafał Miłecki2015-05-131-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45683
* bcm53xx: add b53 hacky workaround for Netgear R8000 CPU portRafał Miłecki2015-05-131-0/+35
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45682
* bcm53xx: fix default network interface on Netgear R8000Rafał Miłecki2015-05-131-2/+11
| | | | | | | | | | It has 3 Ethernet interfaces, each of them connected to separated switch port. Default NVRAM uses switch port 8 as CPU which is connected to the 3rd interface (eth2). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45681
* bcm53xx: bgmac: add support for the 3rd coreRafał Miłecki2015-05-131-0/+68
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45680
* odhcpd: ignore /64 on interface when doing PDSteven Barth2015-05-131-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45679
* bcm53xx: sync NVRAM and SPROM drivers with upstream versionRafał Miłecki2015-05-132-15/+27
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45678
* kernel: backport struct ssb_sprom changes submitted by MIPS treeRafał Miłecki2015-05-132-0/+64
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45677
* b53: Allow using all ports on BCM53012Rafał Miłecki2015-05-121-1/+1
| | | | | | | | | | | | | This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports 5, 7 and 8 connected to Ethernet interfaces: vlan1ports=0 1 2 3 5 7 8* vlan2ports=4 8u Port 6 seems to be always disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45676
* odhcpd: remove invalid call to free()Steven Barth2015-05-111-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 45675
* image: disable compile target within image builderFelix Fietkau2015-05-111-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45674
* build: disable initramfs build within image builderFelix Fietkau2015-05-111-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45673
* ar71xx: convert tl-wr741nd v1/v2 to new image building code, add ↵Felix Fietkau2015-05-111-4/+68
| | | | | | | | infrastructure for building the loader Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45672
* build: make initramfs kernel builds depend on the image prepare stepFelix Fietkau2015-05-111-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45671
* build: add support for adding a per-device compile step in the new image ↵Felix Fietkau2015-05-111-0/+12
| | | | | | | | building code Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45670
* mtd: remove the warning about read-only caused by size vs. block boundary ↵Felix Fietkau2015-05-102-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | mismatch Since the kernel/rootfs split handling was modified 2 years ago by r37283 ( https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins, users have seen rather scary mtd errors in the log at every boot. The message ends "-- forcing read-only", which looks a bit error-like. That error has been mentioned in some forum threads, when users have noticed this message instead of some actual error. [ 2.940000] 0x000000070000-0x000000ff0000 : "firmware" [ 2.970000] 2 netgear-fw partitions found on MTD device firmware [ 2.970000] 0x000000070000-0x000000188440 : "kernel" [ 2.980000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs" The patch removes the rather useless warning message. signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 45669
* scripts/feeds: add support for optionally using a full clone of git repositoriesFelix Fietkau2015-05-101-1/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45668
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45667
* toolchain: change default emulation for mips64 (octeon) to n64Felix Fietkau2015-05-101-0/+37
| | | | | | | | | | | | | | | | | | | fixes several ld errors reported by buildbot: http://buildbot.openwrt.org:8010/broken_packages/octeon/mdnsresponder/compile.txt http://buildbot.openwrt.org:8010/broken_packages/octeon/luasocket/compile.txt http://buildbot.openwrt.org:8010/broken_packages/octeon/luasec/compile.txt http://buildbot.openwrt.org:8010/broken_packages/octeon/openvswitch/compile.txt http://buildbot.openwrt.org:8010/broken_packages/octeon/prosody/compile.txt link error: ABI is incompatible with that of the selected emulation found at OE toolchain for bintils 2.22: http://patchwork.openembedded.org/patch/28033/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 45666
* kernel: fix regression in backtrace module info change (#19631)Felix Fietkau2015-05-102-26/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45665
* gcc: add some size optimization patchesFelix Fietkau2015-05-104-0/+80
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45664
* ipq806x: add pcie support to ipq806x based platformsFelix Fietkau2015-05-1012-23/+2662
| | | | | | | | | | | | | | This change adds PCIe support to IPQ806x based platforms. The driver is actually cherry-picked from the following LKML thread: *https://lwn.net/Articles/643086/ (patches 110-111) We also add here an additional fix to support multiple PCI controllers on the same platform (patch 112), and to patch the ap148 & dbs149 DTS files (patch 113). Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45663
* ipq806x: add support for zImage kernelFelix Fietkau2015-05-103-3/+5
| | | | | | | | | | | | | | | This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45662
* ipq806x: fix boot freeze on zImage kernelFelix Fietkau2015-05-102-0/+144
| | | | | | | | | | | | | | | | | | | | | | | ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended on most ARM architectures. This automatically calculate ZRELADDR by masking PHYS_OFFSET with 0xf8000000. On IPQ806x though, the first ~20MB of RAM is reserved for the hardware. In newer bootloader, when DT is used, this is not a problem, we just reserve this memory in the device tree. But if the bootloader doesn't have DT support, then ATAGS have to be used. In this case, the ARM decompressor will position the kernel in this low mem, which will not be in the RAM section mapped by the bootloader, which means the kernel will freeze in the middle of the boot process trying to map the memory. As a work around, this patch allows disabling AUTO_ZRELADDR when ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders which don't support device-tree, which is the case on certain early IPQ806x based designs. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45661
* include: make dtb argument optional in MkFITFelix Fietkau2015-05-101-1/+1
| | | | | | | | | | | | As mkits.sh makes the -d argument optional, we'll make this same argument optional in the MkFIT function as well. With this change, MkFIT can be used both to generate FIT images with DT, and without DT. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> SVN-Revision: 45660
* build: make device-tree arg optional in mkits.shFelix Fietkau2015-05-101-19/+21
| | | | | | | | | | | | mkits.sh help currently shows dtb file as optional, but generates an invalid its file when this option is unspecified. We're fixing this problem by removing the use of the sed command and just including variables instead. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> SVN-Revision: 45659
* generic: add CRYPTO_DEV_QCE option to default configFelix Fietkau2015-05-102-0/+2
| | | | | | | | | | This option has been added in kernel 3.17. It shows-up only when both ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default to avoid stalling the build when these conditions are met. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45658
* build: don't call prereq for any package/symlinks rulesFelix Fietkau2015-05-102-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the time, we want to make sure OpenWrt has been configured and setup before start running make. However, in case of package/symlinks, forcing prereq as a dependency creates multiple issues: *when executed on a clean workspace, it will prompt for user input and open a menuconfig window before executing the feeds command *the only way around that is to provide a .config. However, the "prereq" target would then run a "make defconfig", which will remove all the packages in the .config but from external feeds, as feeds have not been installed yet. The only way to currently work around this, is to generate a fake config by running "make defconfig", then "make package/symlinks", copy the real config (which at this point disregards the previously generated config), and run make defconfig again. Something like this: make defconfig make package/symlinks cp real.config .config make defconfig This change is removing the need for the first defconfig, making the process more logical for OpenWrt users using the package/symlinks target. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> SVN-Revision: 45657
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-102-1/+10
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> SVN-Revision: 45656
* kernel: when KALLSYMS is disabled, print module address + size for matching ↵Felix Fietkau2015-05-102-0/+76
| | | | | | | | backtrace entries Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45655
* ppp: remove the persist option, netifd handles reconnectsFelix Fietkau2015-05-091-1/+1
| | | | | | | | Significantly reduces reconnect delay Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45654
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 15:17:13 +0000