1 files changed, 0 insertions, 75 deletions
diff --git a/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch
deleted file mode 100644
index ae5576fa5d..0000000000
--- a/target/linux/sunxi/patches-4.1/202-dt-sun7i-add-bluetooth-to-cubietruck.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:15:47 +0800
-Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The
-Bluetooth part is a BCM20710 IC connected to UART2 in the A20
-SoC. The IC also takes a 32.768 KHz low power clock input, a power
-enable signal and a wake signal via GPIO.
-
-The Bluetooth module supports out-of-band interrupt signaling via
-GPIO, but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -88,6 +88,20 @@
- 				interrupts = <10 8>; /* PH10 / EINT10 */
- 				interrupt-names = "host-wake";
- 			};
-+
-+			bt_pwr_pin: bt_pwr_pin@0 {
-+				allwinner,pins = "PH18";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+
-+			bt_wake_pin: bt_wake_pin@0 {
-+				allwinner,pins = "PH24";
-+				allwinner,function = "gpio_out";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
- 		};
- 
- 		usbphy: phy@01c13400 {
-@@ -171,6 +185,12 @@
- 			status = "okay";
- 		};
- 
-+		uart2: serial@01c28800 {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&uart2_pins_a>;
-+			status = "okay";
-+		};
-+
- 		i2c0: i2c@01c2ac00 {
- 			pinctrl-names = "default";
- 			pinctrl-0 = <&i2c0_pins_a>;
-@@ -264,6 +284,22 @@
- 		enable-active-high;
- 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
- 	};
-+
-+	rfkill-switches {
-+		compatible = "simple-bus";
-+		pinctrl-names = "default";
-+
-+		rfkill_bt {
-+			compatible = "rfkill-gpio";
-+			pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>;
-+			rfkill-name = "bt";
-+			rfkill-type = <2>;
-+			bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */
-+			bt_reset-gpios = <&pio 7 24 0>; /* PH24 */
-+			clocks = <&clk_out_a>;
-+			clock-frequency = <32768>;
-+		};
-+	};
- };
- 
- #include "axp209.dtsi"