diff options
Diffstat (limited to 'target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch')
| -rw-r--r-- | target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch | 91 |
1 files changed, 0 insertions, 91 deletions
diff --git a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch deleted file mode 100644 index 4b19579346..0000000000 --- a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai <wens@csie.org> -Date: Thu, 26 Dec 2013 17:14:33 +0800 -Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS - -The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi -part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO. -The IC also takes a 32.768 KHz low power clock input, and a power -enable signal via GPIO. - -The WiFi module supports out-of-band interrupt signaling via GPIO, -but this is not supported in this patch. ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++ - 1 file changed, 47 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -28,6 +28,23 @@ - status = "okay"; - }; - -+ mmc3: mmc@01c12000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc3_pins_a>; -+ pinctrl-1 = <&wifi_host_wake_pin>; -+ vmmc-supply = <®_vmmc3>; -+ non-removable; -+ status = "okay"; -+ -+ brcmf: bcrmf@0 { -+ /* out of band interrupt not working */ -+ /* compatible = "broadcom,bcm43362"; */ -+ interrupt-parent = <&pio>; -+ interrupts = <10 2>; /* EINT10 */ -+ status = "okay"; -+ }; -+ }; -+ - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; -@@ -56,6 +73,18 @@ - }; - - pinctrl@01c20800 { -+ mmc3_pins_a: mmc3@0 { -+ /* AP6210 requires pull-up */ -+ allwinner,pull = <1>; -+ }; -+ -+ vmmc3_pin_cubietruck: vmmc3_pin@0 { -+ allwinner,pins = "PH9"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; -@@ -99,6 +128,13 @@ - - /include/ "x-powers-axp209.dtsi" - }; -+ -+ wifi_host_wake_pin: wifi_host_wake_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - i2c0: i2c@01c2ac00 { -@@ -189,4 +225,15 @@ - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; -+ -+ reg_vmmc3: vmmc3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vmmc3_pin_cubietruck>; -+ regulator-name = "vmmc3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 9 0>; -+ }; - }; |