diff options
Diffstat (limited to 'target/linux/ramips/files/drivers/usb/host/mtk-phy.h')
| -rw-r--r-- | target/linux/ramips/files/drivers/usb/host/mtk-phy.h | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy.h deleted file mode 100644 index 07ed410412..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef __MTK_PHY_NEW_H -#define __MTK_PHY_NEW_H - -//#define CONFIG_U3D_HAL_SUPPORT - -/* include system library */ -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/delay.h> - -/* Choose PHY R/W implementation */ -//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO -#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC - -/* Choose PHY version */ -//Select your project by defining one of the followings -#define CONFIG_PROJECT_7621 //7621 -#define CONFIG_PROJECT_PHY - -/* BASE ADDRESS DEFINE, should define this on ASIC */ -#define PHY_BASE 0xBE1D0000 -#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) -#define U2_PHY_BASE (PHY_BASE+0x800) -#define U3_PHYD_BASE (PHY_BASE+0x900) -#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) -#define U3_PHYA_BASE (PHY_BASE+0xb00) -#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) - -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) -#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) -#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) -#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) -#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) -#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) -#endif - -/* - -0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg -0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc -0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 -0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 -0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 -0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 -0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 -*/ - - -/* TYPE DEFINE */ -typedef unsigned int PHY_UINT32; -typedef int PHY_INT32; -typedef unsigned short PHY_UINT16; -typedef short PHY_INT16; -typedef unsigned char PHY_UINT8; -typedef char PHY_INT8; - -typedef PHY_UINT32 __bitwise PHY_LE32; - -/* CONSTANT DEFINE */ -#define PHY_FALSE 0 -#define PHY_TRUE 1 - -/* MACRO DEFINE */ -#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) -#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) - -#define DRV_MDELAY mdelay -#define DRV_MSLEEP msleep -#define DRV_UDELAY udelay -#define DRV_USLEEP usleep - -/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ -PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); -PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); -PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); -PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); - -/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ -PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); -PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); - -struct u3phy_info { - PHY_INT32 phy_version; - PHY_INT32 phyd_version_addr; - -#ifdef CONFIG_PROJECT_PHY - struct u2phy_reg *u2phy_regs; - struct u3phya_reg *u3phya_regs; - struct u3phya_da_reg *u3phya_da_regs; - struct u3phyd_reg *u3phyd_regs; - struct u3phyd_bank2_reg *u3phyd_bank2_regs; - struct sifslv_chip_reg *sifslv_chip_regs; - struct sifslv_fm_feg *sifslv_fm_regs; -#endif -}; - -struct u3phy_operator { - PHY_INT32 (*init) (struct u3phy_info *info); - PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); - PHY_INT32 (*eyescan_init) (struct u3phy_info *info); - PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); - PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); - PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); - PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); -}; - -#ifdef U3_PHY_LIB -#define AUTOEXT -#else -#define AUTOEXT extern -#endif - -AUTOEXT struct u3phy_info *u3phy; -AUTOEXT struct u3phy_info *u3phy_p1; -AUTOEXT struct u3phy_operator *u3phy_ops; - -/*********eye scan required*********/ - -#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) -#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) - -typedef enum -{ - SCAN_UP, - SCAN_DN -} enumScanDir; - -struct strucScanRegion -{ - PHY_INT8 bX_tl; - PHY_INT8 bY_tl; - PHY_INT8 bX_br; - PHY_INT8 bY_br; - PHY_INT8 bDeltaX; - PHY_INT8 bDeltaY; -}; - -struct strucTestCycle -{ - PHY_UINT16 wEyeCnt; - PHY_INT8 bNumOfEyeCnt; - PHY_INT8 bPICalEn; - PHY_INT8 bNumOfIgnoreCnt; -}; - -#define ERRCNT_MAX 128 -#define CYCLE_COUNT_MAX 15 - -/// the map resolution is 128 x 128 pts -#define MAX_X 127 -#define MAX_Y 127 -#define MIN_X 0 -#define MIN_Y 0 - -PHY_INT32 u3phy_init(void); - -AUTOEXT struct strucScanRegion _rEye1; -AUTOEXT struct strucScanRegion _rEye2; -AUTOEXT struct strucTestCycle _rTestCycle; -AUTOEXT PHY_UINT8 _bXcurr; -AUTOEXT PHY_UINT8 _bYcurr; -AUTOEXT enumScanDir _eScanDir; -AUTOEXT PHY_INT8 _fgXChged; -AUTOEXT PHY_INT8 _bPIResult; -/* use local variable instead to save memory use */ -#if 0 -AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -#endif - -/***********************************/ -#endif - |