diff options
Diffstat (limited to 'target/linux/ramips/base-files')
6 files changed, 11 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 6ecb13352c..c0fdc88877 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -27,7 +27,7 @@ get_status_led() { d105) status_led="d105:red:power" ;; - dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1) + dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1) status_led="d-link:green:status" ;; dir-645) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 9e9e09be3d..a80ea4ff49 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -68,6 +68,7 @@ case "$FIRMWARE" in br6524n | \ carambola | \ d105 | \ + dir-610-a1 | \ dir-615-h1 | \ dir-620-a1 | \ dir-620-d1 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 7bec16f491..64c7c5e469 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -77,6 +77,7 @@ case $board in dir-810l) ucidef_set_led_default "power" "POWER" "dlink:green:power" "1" ;; + dir-610-a1 |\ esr-9753) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 1d77e7c886..e444ef246d 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -77,6 +77,7 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "0 6t" ;; + dir-610-a1 | \ dir-615-h1 | \ mzk-w300nh2) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" @@ -205,7 +206,8 @@ ramips_setup_macs() dir-300-b1 |\ dir-300-b2 |\ - dir-600-b1) + dir-600-b1 |\ + dir-610-a1) lan_mac=$(mtd_get_mac_binary devdata 16388) wan_mac=$(macaddr_add "$lan_mac" 1) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index a0d9b6123b..44cab3aa19 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -39,7 +39,8 @@ preinit_set_mac_address() { asl26555 |\ dir-300-b1 |\ dir-300-b2 |\ - dir-600-b1) + dir-600-b1 |\ + dir-610-a1) mac=$(mtd_get_mac_binary devdata 16388) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3ec44d2fff..066f3bdb40 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -73,6 +73,9 @@ ramips_board_detect() { *"DIR-600 B2") name="dir-600-b2" ;; + *"DIR-610 A1") + name="dir-610-a1" + ;; *"DIR-620 A1") name="dir-620-a1" ;; |