1 files changed, 0 insertions, 79 deletions
diff --git a/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch
deleted file mode 100644
index 1b1f9d44c0..0000000000
--- a/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- 
- #include "am33xx.dtsi"
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pwm/pwm.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- 
-@@ -27,6 +28,13 @@
- 		};
- 	};
- 
-+	wlan {
-+		compatible = "wlcore";
-+
-+		gpio = <31>;
-+		board-ref-clock = <4>;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x80000000 0x10000000>; /* 256 MB */
-@@ -69,6 +77,16 @@
- 		enable-active-high;
- 	};
- 
-+	vmmc_wl: fixedregulator@2 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vmmc-wl";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		gpio = <&gpio1 29 0>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&user_leds_s0>;
-@@ -446,6 +464,20 @@
- 			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
- 		>;
- 	};
-+
-+	wilink_pins: pinmux_wilink_pins {
-+		pinctrl-single,pins = <
-+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-+		>;
-+	};
-+
- };
- 
- &uart0 {
-@@ -693,6 +725,16 @@
- 	};
- };
- 
-+&mmc2 {
-+	status = "okay";
-+	vmmc-supply = <&vmmc_wl>;
-+	bus-width = <4>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&wilink_pins>;
-+	ti,non-removable;
-+	keep-power-in-suspend;
-+};
-+
- &mcasp1 {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&mcasp1_pins>;