1 files changed, 0 insertions, 105 deletions
diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h
deleted file mode 100644
index e074901517..0000000000
--- a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * ADM6996 switch driver
- *
- * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of the GNU General Public License v2 as published by the
- * Free Software Foundation
- */
-#ifndef __ADM6996_H
-#define __ADM6996_H
-
-#define ADM_PHY_PORTS	5
-#define ADM_CPU_PORT	5
-#define ADM_WAN_PORT	0 /* FIXME: dynamic ? */
-
-enum admreg {
-	ADM_EEPROM_BASE		= 0x0,
-		ADM_P0_CFG		= ADM_EEPROM_BASE + 1,
-		ADM_P1_CFG		= ADM_EEPROM_BASE + 3,
-		ADM_P2_CFG		= ADM_EEPROM_BASE + 5,
-		ADM_P3_CFG		= ADM_EEPROM_BASE + 7,
-		ADM_P4_CFG		= ADM_EEPROM_BASE + 8,
-		ADM_P5_CFG		= ADM_EEPROM_BASE + 9,
-	ADM_EEPROM_EXT_BASE	= 0x40,
-	ADM_COUNTER_BASE	= 0xa0,
-		ADM_SIG0		= ADM_COUNTER_BASE + 0,
-		ADM_SIG1		= ADM_COUNTER_BASE + 1,
-	ADM_PHY_BASE		= 0x200,
-#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
-};
-
-/* Chip identification patterns */
-#define	ADM_SIG0_MASK	0xfff0
-#define ADM_SIG0_VAL	0x1020
-#define ADM_SIG1_MASK	0xffff
-#define ADM_SIG1_VAL	0x0007
-
-enum {
-	ADM_PHYCFG_COLTST     = (1 << 7),	/* Enable collision test */
-	ADM_PHYCFG_DPLX       = (1 << 8),	/* Enable full duplex */
-	ADM_PHYCFG_ANEN_RST   = (1 << 9),	/* Restart auto negotiation (self clear) */
-	ADM_PHYCFG_ISO        = (1 << 10),	/* Isolate PHY */
-	ADM_PHYCFG_PDN        = (1 << 11),	/* Power down PHY */
-	ADM_PHYCFG_ANEN       = (1 << 12),	/* Enable auto negotiation */
-	ADM_PHYCFG_SPEED_100  = (1 << 13),	/* Enable 100 Mbit/s */
-	ADM_PHYCFG_LPBK       = (1 << 14),	/* Enable loopback operation */
-	ADM_PHYCFG_RST        = (1 << 15),	/* Reset the port (self clear) */
-	ADM_PHYCFG_INIT = (
-		ADM_PHYCFG_RST |
-		ADM_PHYCFG_SPEED_100 |
-		ADM_PHYCFG_ANEN |
-		ADM_PHYCFG_ANEN_RST
-	)
-};
-
-enum {
-	ADM_PORTCFG_FC        = (1 << 0),	/* Enable 802.x flow control */
-	ADM_PORTCFG_AN        = (1 << 1),	/* Enable auto-negotiation */
-	ADM_PORTCFG_SPEED_100 = (1 << 2),	/* Enable 100 Mbit/s */
-	ADM_PORTCFG_DPLX      = (1 << 3),	/* Enable full duplex */
-	ADM_PORTCFG_OT        = (1 << 4),	/* Output tagged packets */
-	ADM_PORTCFG_PD        = (1 << 5),	/* Port disable */
-	ADM_PORTCFG_TV_PRIO   = (1 << 6),	/* 0 = VLAN based priority
-	                                 	 * 1 = TOS based priority */
-	ADM_PORTCFG_PPE       = (1 << 7),	/* Port based priority enable */
-	ADM_PORTCFG_PP_S      = (1 << 8),	/* Port based priority, 2 bits */
-	ADM_PORTCFG_PVID_BASE = (1 << 10),	/* Primary VLAN id, 4 bits */
-	ADM_PORTCFG_FSE	      = (1 << 14),	/* Fx select enable */
-	ADM_PORTCFG_CAM       = (1 << 15),	/* Crossover Auto MDIX */
-
-	ADM_PORTCFG_INIT = (
-		ADM_PORTCFG_FC |
-		ADM_PORTCFG_AN |
-		ADM_PORTCFG_SPEED_100 |
-		ADM_PORTCFG_DPLX |
-		ADM_PORTCFG_CAM
-	),
-	ADM_PORTCFG_CPU = (
-		ADM_PORTCFG_FC |
-		ADM_PORTCFG_SPEED_100 |
-		ADM_PORTCFG_OT |
-		ADM_PORTCFG_DPLX
-	),
-};
-
-#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
-#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
-
-static const u8 adm_portcfg[] = {
-	[0] = ADM_P0_CFG,
-	[1] = ADM_P1_CFG,
-	[2] = ADM_P2_CFG,
-	[3] = ADM_P3_CFG,
-	[4] = ADM_P4_CFG,
-	[5] = ADM_P5_CFG,
-};
-
-/*
- * Split the register address in phy id and register
- * it will get combined again by the mdio bus op
- */
-#define PHYADDR(_reg)	((_reg >> 5) & 0xff), (_reg & 0x1f)
-
-#endif