summaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h')
-rw-r--r--target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h105
1 files changed, 105 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h
new file mode 100644
index 0000000000..e074901517
--- /dev/null
+++ b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h
@@ -0,0 +1,105 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#ifndef __ADM6996_H
+#define __ADM6996_H
+
+#define ADM_PHY_PORTS 5
+#define ADM_CPU_PORT 5
+#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */
+
+enum admreg {
+ ADM_EEPROM_BASE = 0x0,
+ ADM_P0_CFG = ADM_EEPROM_BASE + 1,
+ ADM_P1_CFG = ADM_EEPROM_BASE + 3,
+ ADM_P2_CFG = ADM_EEPROM_BASE + 5,
+ ADM_P3_CFG = ADM_EEPROM_BASE + 7,
+ ADM_P4_CFG = ADM_EEPROM_BASE + 8,
+ ADM_P5_CFG = ADM_EEPROM_BASE + 9,
+ ADM_EEPROM_EXT_BASE = 0x40,
+ ADM_COUNTER_BASE = 0xa0,
+ ADM_SIG0 = ADM_COUNTER_BASE + 0,
+ ADM_SIG1 = ADM_COUNTER_BASE + 1,
+ ADM_PHY_BASE = 0x200,
+#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
+};
+
+/* Chip identification patterns */
+#define ADM_SIG0_MASK 0xfff0
+#define ADM_SIG0_VAL 0x1020
+#define ADM_SIG1_MASK 0xffff
+#define ADM_SIG1_VAL 0x0007
+
+enum {
+ ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */
+ ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */
+ ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */
+ ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */
+ ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */
+ ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */
+ ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */
+ ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */
+ ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */
+ ADM_PHYCFG_INIT = (
+ ADM_PHYCFG_RST |
+ ADM_PHYCFG_SPEED_100 |
+ ADM_PHYCFG_ANEN |
+ ADM_PHYCFG_ANEN_RST
+ )
+};
+
+enum {
+ ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */
+ ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */
+ ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */
+ ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */
+ ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */
+ ADM_PORTCFG_PD = (1 << 5), /* Port disable */
+ ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority
+ * 1 = TOS based priority */
+ ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */
+ ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */
+ ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */
+ ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */
+ ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */
+
+ ADM_PORTCFG_INIT = (
+ ADM_PORTCFG_FC |
+ ADM_PORTCFG_AN |
+ ADM_PORTCFG_SPEED_100 |
+ ADM_PORTCFG_DPLX |
+ ADM_PORTCFG_CAM
+ ),
+ ADM_PORTCFG_CPU = (
+ ADM_PORTCFG_FC |
+ ADM_PORTCFG_SPEED_100 |
+ ADM_PORTCFG_OT |
+ ADM_PORTCFG_DPLX
+ ),
+};
+
+#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
+#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
+
+static const u8 adm_portcfg[] = {
+ [0] = ADM_P0_CFG,
+ [1] = ADM_P1_CFG,
+ [2] = ADM_P2_CFG,
+ [3] = ADM_P3_CFG,
+ [4] = ADM_P4_CFG,
+ [5] = ADM_P5_CFG,
+};
+
+/*
+ * Split the register address in phy id and register
+ * it will get combined again by the mdio bus op
+ */
+#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f)
+
+#endif