diff options
Diffstat (limited to 'target/linux/brcm47xx/base-files/etc/board.d/01_detect')
| -rwxr-xr-x | target/linux/brcm47xx/base-files/etc/board.d/01_detect | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect new file mode 100755 index 0000000000..2623b57bce --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect @@ -0,0 +1,170 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006-2015 OpenWrt.org + +. /lib/functions/system.sh +. /lib/functions/uci-defaults-new.sh + +detect_by_vlanports() { + local vlan0ports="$(nvram get vlan0ports)" + local vlan1ports="$(nvram get vlan1ports)" + local vlan2ports="$(nvram get vlan2ports)" + local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")" + + if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ]; + then + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" + + elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ]; + then + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + + else + logger -t "01_detect" "Unable to determine network configuration" + ucidef_set_interface_lan "eth0" + fi +} + +detect_by_boardnum() { + local boardnum="$1" + + case "$boardnum" in + # WAP54G, Sitecom WL-105b + "2" | \ + "1024") + ucidef_set_interface_lan "eth0" + ;; + + # Generic detection fallback + *) + detect_by_vlanports + ;; + esac +} + +detect_by_boardtype() { + local boardtype="$1" + local boardnum="$2" + + case "$boardtype" in + "bcm94710r4") + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; + + "0x0467") + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + + "0x042f" | \ + "0x0472") + # WL-500gP + if [ "$boardnum" = "45" ]; then + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + + # Generic BCM94704 + else + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + + # MAC addresses on 4704 tend to be screwed up. Add a workaround here + local mac="$(nvram get et0macaddr)" + local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]" + + case "$mac" in + $pat) + ucidef_set_interface_macaddr "lan" "$mac" + ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)" + ;; + esac + fi + ;; + + # Buffalo WBR-B11 and Buffalo WBR-G54 + "bcm94710ap") + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + ;; + + *) + detect_by_boardnum "$boardnum" + ;; + esac +} + +detect_by_model() { + local model="$1" + local boardtype="$2" + local boardnum="$3" + + # Netgear WGT634U exception + if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + return + fi + + case "$model" in + "Asus WLHDD" | \ + "Asus WL300G") + ucidef_set_interface_lan "eth1" + ;; + + "Asus WL330GE") + ucidef_add_switch "switch0" "4:lan" "5t@eth0" + ;; + + "Asus WL500G" | \ + "Asus WL500W" | \ + "Microsoft MN-700") + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; + + "Asus WL500GP V2" | \ + "Buffalo WHR-G125" | \ + "Motorola WR850G" | \ + "Siemens SE505 V2") + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + + "Asus WL700") + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0" + ;; + + "Dell TrueMobile 2300") + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" + ;; + + *) + detect_by_boardtype "$boardtype" "$boardnum" + ;; + esac +} + + +local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)" +local boardtype="$(nvram get boardtype)" +local boardnum="$(nvram get boardnum)" + +board_config_update + +ucidef_set_board_id "$boardtype${boardnum:+:$boardnum}" +ucidef_set_model_name "$model" + +detect_by_model "$model" "$boardtype" "$boardnum" + +board_config_flush |