diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch b/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch deleted file mode 100644 index 8a20da6279..0000000000 --- a/target/linux/bcm53xx/patches-3.14/004-mtd-spi-nor-from-3.20.patch +++ /dev/null @@ -1,116 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -538,6 +538,7 @@ static const struct spi_device_id spi_no - /* GigaDevice */ - { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, - { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, -@@ -560,14 +561,14 @@ static const struct spi_device_id spi_no - { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, - - /* Micron */ -- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, -- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, -- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, -- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, -- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, -- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, -- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, -- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) }, -+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, -+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) }, -+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, -+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, -+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, -+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, - - /* PMC */ - { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, -@@ -890,6 +891,45 @@ static int spansion_quad_enable(struct s - return 0; - } - -+static int micron_quad_enable(struct spi_nor *nor) -+{ -+ int ret; -+ u8 val; -+ -+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); -+ if (ret < 0) { -+ dev_err(nor->dev, "error %d reading EVCR\n", ret); -+ return ret; -+ } -+ -+ write_enable(nor); -+ -+ /* set EVCR, enable quad I/O */ -+ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; -+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); -+ if (ret < 0) { -+ dev_err(nor->dev, "error while writing EVCR register\n"); -+ return ret; -+ } -+ -+ ret = spi_nor_wait_till_ready(nor); -+ if (ret) -+ return ret; -+ -+ /* read EVCR and check it */ -+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); -+ if (ret < 0) { -+ dev_err(nor->dev, "error %d reading EVCR\n", ret); -+ return ret; -+ } -+ if (val & EVCR_QUAD_EN_MICRON) { -+ dev_err(nor->dev, "Micron EVCR Quad bit not clear\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ - static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) - { - int status; -@@ -902,6 +942,13 @@ static int set_quad_mode(struct spi_nor - return -EINVAL; - } - return status; -+ case CFI_MFR_ST: -+ status = micron_quad_enable(nor); -+ if (status) { -+ dev_err(nor->dev, "Micron quad-read not enabled\n"); -+ return -EINVAL; -+ } -+ return status; - default: - status = spansion_quad_enable(nor); - if (status) { ---- a/include/linux/mtd/spi-nor.h -+++ b/include/linux/mtd/spi-nor.h -@@ -56,6 +56,10 @@ - /* Used for Spansion flashes only. */ - #define SPINOR_OP_BRWR 0x17 /* Bank register write */ - -+/* Used for Micron flashes only. */ -+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ -+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ -+ - /* Status Register bits. */ - #define SR_WIP 1 /* Write in progress */ - #define SR_WEL 2 /* Write enable latch */ -@@ -67,6 +71,9 @@ - - #define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ - -+/* Enhanced Volatile Configuration Register bits */ -+#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */ -+ - /* Flag Status Register bits */ - #define FSR_READY 0x80 - |