diff options
Diffstat (limited to 'target/linux/atheros/files-2.6.26/include/asm-mips/mach-atheros/ar5312/ar5312.h')
| -rw-r--r-- | target/linux/atheros/files-2.6.26/include/asm-mips/mach-atheros/ar5312/ar5312.h | 234 |
1 files changed, 0 insertions, 234 deletions
diff --git a/target/linux/atheros/files-2.6.26/include/asm-mips/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files-2.6.26/include/asm-mips/mach-atheros/ar5312/ar5312.h deleted file mode 100644 index afa3aefdad..0000000000 --- a/target/linux/atheros/files-2.6.26/include/asm-mips/mach-atheros/ar5312/ar5312.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - */ - -#ifndef AR5312_H -#define AR5312_H - -#include <asm/addrspace.h> - -/* - * IRQs - */ - -#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ - - -/* Address Map */ -#define AR531X_WLAN0 0x18000000 -#define AR531X_WLAN1 0x18500000 -#define AR531X_ENET0 0x18100000 -#define AR531X_ENET1 0x18200000 -#define AR531X_SDRAMCTL 0x18300000 -#define AR531X_FLASHCTL 0x18400000 -#define AR531X_APBBASE 0x1c000000 -#define AR531X_FLASH 0x1e000000 -#define AR531X_UART0 0xbc000003 /* UART MMR */ - -/* - * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that - * should be considered available. The AR5312 supports 2 enet MACS, - * even though many reference boards only actually use 1 of them - * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. - * The AR2312 supports 1 enet MAC. - */ -#define AR531X_NUM_ENET_MAC 2 - -/* - * Need these defines to determine true number of ethernet MACs - */ -#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -#define AR531X_RADIO_MASK_OFF 0xc8 -#define AR531X_RADIO0_MASK 0x0003 -#define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 - -/* - * AR531X_NUM_WMAC defines the number of Wireless MACs that\ - * should be considered available. - */ -#define AR531X_NUM_WMAC 2 - -/* Reset/Timer Block Address Map */ -#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ - -/* AR531X_WD_CTRL register bit field definitions */ -#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -#define AR531X_WD_CTRL_NMI 0x0001 -#define AR531X_WD_CTRL_RESET 0x0002 - -/* AR531X_ISR register bit field definitions */ -#define AR531X_ISR_NONE 0x0000 -#define AR531X_ISR_TIMER 0x0001 -#define AR531X_ISR_AHBPROC 0x0002 -#define AR531X_ISR_AHBDMA 0x0004 -#define AR531X_ISR_GPIO 0x0008 -#define AR531X_ISR_UART0 0x0010 -#define AR531X_ISR_UART0DMA 0x0020 -#define AR531X_ISR_WD 0x0040 -#define AR531X_ISR_LOCAL 0x0080 - -/* AR531X_RESET register bit field definitions */ -#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ - -#define AR531X_RESET_WMAC0_BITS \ - AR531X_RESET_WLAN0 |\ - AR531X_RESET_WARM_WLAN0_MAC |\ - AR531X_RESET_WARM_WLAN0_BB - -#define AR531X_RESERT_WMAC1_BITS \ - AR531X_RESET_WLAN1 |\ - AR531X_RESET_WARM_WLAN1_MAC |\ - AR531X_RESET_WARM_WLAN1_BB - -/* AR5312_CLOCKCTL1 register bit field definitions */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR5312 and AR2312 */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR2313 */ -#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 - - -/* AR531X_ENABLE register bit field definitions */ -#define AR531X_ENABLE_WLAN0 0x0001 -#define AR531X_ENABLE_ENET0 0x0002 -#define AR531X_ENABLE_ENET1 0x0004 -#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -#define AR531X_ENABLE_WLAN1 \ - (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) - -/* AR531X_REV register bit field definitions */ -#define AR531X_REV_WMAC_MAJ 0xf000 -#define AR531X_REV_WMAC_MAJ_S 12 -#define AR531X_REV_WMAC_MIN 0x0f00 -#define AR531X_REV_WMAC_MIN_S 8 -#define AR531X_REV_MAJ 0x00f0 -#define AR531X_REV_MAJ_S 4 -#define AR531X_REV_MIN 0x000f -#define AR531X_REV_MIN_S 0 -#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define AR531X_REV_MAJ_AR5312 0x4 -#define AR531X_REV_MAJ_AR2313 0x5 - -/* Minor revision numbers, bits 3..0 of Revision ID register */ -#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ - -/* AR531X_FLASHCTL register bit field definitions */ -#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -#define FLASHCTL_IDCY_S 0 -#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -#define FLASHCTL_WST1_S 5 -#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -#define FLASHCTL_WST2_S 11 -#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -#define FLASHCTL_AC_S 16 -#define FLASHCTL_AC_128K 0x00000000 -#define FLASHCTL_AC_256K 0x00010000 -#define FLASHCTL_AC_512K 0x00020000 -#define FLASHCTL_AC_1M 0x00030000 -#define FLASHCTL_AC_2M 0x00040000 -#define FLASHCTL_AC_4M 0x00050000 -#define FLASHCTL_AC_8M 0x00060000 -#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -#define FLASHCTL_WP 0x04000000 /* Write protect */ -#define FLASHCTL_BM 0x08000000 /* Burst mode */ -#define FLASHCTL_MW 0x30000000 /* Memory width */ -#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ - -/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) - -/* ARM SDRAM Controller -- just enough to determine memory size */ -#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -#define MEM_CFG1_AC0_S 8 -#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -#define MEM_CFG1_AC1_S 12 - -/* GPIO Address Map */ -#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ - -/* GPIO Control Register bit field definitions */ -#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ - -#endif - |