diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch | 192 |
1 files changed, 188 insertions, 4 deletions
diff --git a/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch index d8d48f58e0..78035131db 100644 --- a/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ b/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/mach-ubnt-xm.c +++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -12,16 +12,22 @@ +@@ -12,16 +12,24 @@ #include <linux/init.h> #include <linux/pci.h> @@ -9,9 +9,11 @@ +#include <linux/etherdevice.h> +#include <linux/ar8216_platform.h> ++#include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/irq.h> +#include <asm/mach-ath79/ar71xx_regs.h> ++#include "common.h" #include "dev-ap9x-pci.h" +#include "dev-eth.h" #include "dev-gpio-buttons.h" @@ -24,7 +26,7 @@ #define UBNT_XM_GPIO_LED_L1 0 #define UBNT_XM_GPIO_LED_L2 1 -@@ -37,19 +43,19 @@ +@@ -37,19 +45,19 @@ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { { @@ -48,7 +50,7 @@ .gpio = UBNT_XM_GPIO_LED_L4, .active_low = 0, }, -@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g +@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g } }; @@ -62,7 +64,7 @@ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), ubnt_xm_leds_gpio); -@@ -79,9 +89,246 @@ static void __init ubnt_xm_init(void) +@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void) ath79_register_m25p80(NULL); ap91_pci_init(eeprom, NULL); @@ -163,6 +165,19 @@ + } +}; + ++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:white:front", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:blue:front", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; ++ ++ +static void __init ubnt_unifi_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); @@ -222,6 +237,38 @@ + "Ubiquiti UniFiAP Outdoor", + ubnt_unifi_outdoor_setup); + ++ ++static void __init ubnt_unifi_outdoor_plus_setup(void) ++{ ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | ++ UBNT_UNIFIOD_2ND_PHYMASK)); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); ++ ath79_register_eth(0); ++ ath79_register_eth(1); ++ ++ ap91_pci_init(ee, NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), ++ ubnt_unifi_outdoor_plus_leds_gpio); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", ++ "Ubiquiti UniFiAP Outdoor+", ++ ubnt_unifi_outdoor_plus_setup); ++ ++ +static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { + { + .name = "ubnt:white:dome", @@ -309,6 +356,143 @@ +MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", + ubnt_uap_pro_setup); + ++#define UBNT_XW_GPIO_LED_L1 11 ++#define UBNT_XW_GPIO_LED_L2 16 ++#define UBNT_XW_GPIO_LED_L3 13 ++#define UBNT_XW_GPIO_LED_L4 14 ++ ++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:red:link1", ++ .gpio = UBNT_XW_GPIO_LED_L1, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:orange:link2", ++ .gpio = UBNT_XW_GPIO_LED_L2, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link3", ++ .gpio = UBNT_XW_GPIO_LED_L3, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link4", ++ .gpio = UBNT_XW_GPIO_LED_L4, ++ .active_low = 1, ++ }, ++}; ++ ++static void __init ubnt_xw_init(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), ++ ubnt_xw_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++ ++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); ++ ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ eeprom + UAP_PRO_MAC0_OFFSET, 0); ++ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++} ++ ++static void __init ubnt_nano_m_xw_setup(void) ++{ ++ ubnt_xw_init(); ++ ++ /* GMAC0 is connected to an AR8326 switch */ ++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); ++ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_register_eth(0); ++} ++ ++static void __init ubnt_loco_m_xw_setup(void) ++{ ++ ubnt_xw_init(); ++ ++ ath79_register_mdio(0, ~BIT(1)); ++ ath79_eth0_data.phy_mask = BIT(1); ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", ++ ubnt_nano_m_xw_setup); ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", ++ ubnt_loco_m_xw_setup); ++ ++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { ++ { ++ .name = "ubnt:blue:wlan", ++ .gpio = 0, ++ }, { ++ .name = "ubnt:white:status", ++ .gpio = 1, ++ }, ++}; ++ ++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 12, ++ .active_low = 1, ++ } ++}; ++ ++static void __init ubnt_airgateway_setup(void) ++{ ++ u32 t; ++ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ++ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | ++ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); ++ ++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; ++ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), ++ ubnt_airgateway_gpio_leds); ++ ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(airgateway_gpio_keys), ++ airgateway_gpio_keys); ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_register_eth(1); ++ ath79_register_eth(0); ++ ++ ath79_register_wmac(ee, NULL); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", ++ ubnt_airgateway_setup); ++ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -68,12 +68,16 @@ config ATH79_MACH_PB44 |