1 files changed, 0 insertions, 90 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
deleted file mode 100644
index 65023ab662..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  $Id$
- *
- *  Edimax boards
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_irq.h>
-#include <adm5120_platform.h>
-
-static struct adm5120_pci_irq br61xx_pci_irqs[] __initdata = {
-	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct mtd_partition br61xx_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 32*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 32*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_device *br6104k_devices[] __initdata = {
-	&adm5120_flash0_device,
-	&adm5120_hcd_device,
-	&adm5120_buttons_device,
-};
-
-static struct platform_device *br61x4wg_devices[] __initdata = {
-	&adm5120_flash0_device,
-};
-
-static void __init br61xx_setup(void) {
-	/* setup data for flash0 device */
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
-	adm5120_flash0_data.parts = br61xx_partitions;
-
-	adm5120_buttons_data.nbuttons = 1;
-	adm5120_buttons[0].desc = "reset button";
-	adm5120_buttons[0].gpio = ADM5120_GPIO_PIN2;
-
-	/* TODO: setup mac addresses, if possible */
-}
-
-unsigned char br61xx_vlans[6] = {
-	0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(BR6104K, "Edimax BR-6104K/6104KP")
-	.board_setup	= br61xx_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= br61xx_vlans,
-	.num_devices	= ARRAY_SIZE(br6104k_devices),
-	.devices	= br6104k_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(BR61x4WG, "Edimax BR-6104WG/6114WG")
-	.board_setup	= br61xx_setup,
-	.eth_num_ports	= 5,
-	.eth_vlans	= br61xx_vlans,
-	.num_devices	= ARRAY_SIZE(br61x4wg_devices),
-	.devices	= br61x4wg_devices,
-	.pci_nr_irqs	= ARRAY_SIZE(br61xx_pci_irqs),
-	.pci_irq_map	= br61xx_pci_irqs,
-ADM5120_BOARD_END