diff options
Diffstat (limited to 'target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c')
| -rw-r--r-- | target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c deleted file mode 100644 index 5c441da90e..0000000000 --- a/target/linux/adm5120/files-3.14/arch/mips/adm5120/infineon/infineon.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Infineon Reference Boards - * - * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include "infineon.h" - -#include <prom/admboot.h> - -#define EASY_CONFIG_OFFSET 0x10000 -#define EASY_CONFIG_SIZE 0x1000 - -static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "boardcfg", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static __init void easy_setup_mac(void) -{ - u8 mac_base[6]; - int err; - - err = admboot_get_mac_base(EASY_CONFIG_OFFSET, - EASY_CONFIG_SIZE, mac_base); - - if ((err) || !is_valid_ether_addr(mac_base)) - random_ether_addr(mac_base); - - adm5120_setup_eth_macs(mac_base); -} - -static void switch_bank_gpio3(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN3, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN3, 1); - break; - } -} - -void __init easy_setup_pqfp(void) -{ - /* setup flash A20 line */ - gpio_request(ADM5120_GPIO_PIN3, NULL); - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); - - adm5120_add_device_flash(0); - - easy_setup_mac(); -} - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -void __init easy_setup_bga(void) -{ - /* setup flash A20 line */ - gpio_request(ADM5120_GPIO_PIN5, NULL); - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - adm5120_add_device_uart(0); - adm5120_add_device_uart(1); - - adm5120_add_device_flash(0); - - easy_setup_mac(); -} |