diff options
Diffstat (limited to 'package/system/ltq-dsl/src/ifxmips_mei_interface.h')
| -rw-r--r-- | package/system/ltq-dsl/src/ifxmips_mei_interface.h | 702 |
1 files changed, 0 insertions, 702 deletions
diff --git a/package/system/ltq-dsl/src/ifxmips_mei_interface.h b/package/system/ltq-dsl/src/ifxmips_mei_interface.h deleted file mode 100644 index 4ddc4c6aed..0000000000 --- a/package/system/ltq-dsl/src/ifxmips_mei_interface.h +++ /dev/null @@ -1,702 +0,0 @@ -/****************************************************************************** - - Copyright (c) 2009 - Infineon Technologies AG - Am Campeon 1-12; 81726 Munich, Germany - - For licensing information, see the file 'LICENSE' in the root folder of - this software module. - -******************************************************************************/ - -#ifndef IFXMIPS_MEI_H -#define IFXMIPS_MEI_H - -//#define CONFIG_AMAZON_SE 1 -//#define CONFIG_DANUBE 1 -//#define CONFIG_AR9 1 - -#if !defined(CONFIG_DANUBE) && !defined(CONFIG_AMAZON_SE) && !defined(CONFIG_AR9) && !defined(CONFIG_VR9) -#error Platform undefined!!! -#endif - -#ifdef IFX_MEI_BSP -/** This is the character datatype. */ -typedef char DSL_char_t; -/** This is the unsigned 8-bit datatype. */ -typedef unsigned char DSL_uint8_t; -/** This is the signed 8-bit datatype. */ -typedef signed char DSL_int8_t; -/** This is the unsigned 16-bit datatype. */ -typedef unsigned short DSL_uint16_t; -/** This is the signed 16-bit datatype. */ -typedef signed short DSL_int16_t; -/** This is the unsigned 32-bit datatype. */ -typedef unsigned long DSL_uint32_t; -/** This is the signed 32-bit datatype. */ -typedef signed long DSL_int32_t; -/** This is the float datatype. */ -typedef float DSL_float_t; -/** This is the void datatype. */ -typedef void DSL_void_t; -/** integer type, width is depending on processor arch */ -typedef int DSL_int_t; -/** unsigned integer type, width is depending on processor arch */ -typedef unsigned int DSL_uint_t; -typedef struct file DSL_DRV_file_t; -typedef struct inode DSL_DRV_inode_t; - -/** - * Defines all possible CMV groups - * */ -typedef enum { - DSL_CMV_GROUP_CNTL = 1, - DSL_CMV_GROUP_STAT = 2, - DSL_CMV_GROUP_INFO = 3, - DSL_CMV_GROUP_TEST = 4, - DSL_CMV_GROUP_OPTN = 5, - DSL_CMV_GROUP_RATE = 6, - DSL_CMV_GROUP_PLAM = 7, - DSL_CMV_GROUP_CNFG = 8 -} DSL_CmvGroup_t; -/** - * Defines all opcode types - * */ -typedef enum { - H2D_CMV_READ = 0x00, - H2D_CMV_WRITE = 0x04, - H2D_CMV_INDICATE_REPLY = 0x10, - H2D_ERROR_OPCODE_UNKNOWN =0x20, - H2D_ERROR_CMV_UNKNOWN =0x30, - - D2H_CMV_READ_REPLY =0x01, - D2H_CMV_WRITE_REPLY = 0x05, - D2H_CMV_INDICATE = 0x11, - D2H_ERROR_OPCODE_UNKNOWN = 0x21, - D2H_ERROR_CMV_UNKNOWN = 0x31, - D2H_ERROR_CMV_READ_NOT_AVAILABLE = 0x41, - D2H_ERROR_CMV_WRITE_ONLY = 0x51, - D2H_ERROR_CMV_READ_ONLY = 0x61, - - H2D_DEBUG_READ_DM = 0x02, - H2D_DEBUG_READ_PM = 0x06, - H2D_DEBUG_WRITE_DM = 0x0a, - H2D_DEBUG_WRITE_PM = 0x0e, - - D2H_DEBUG_READ_DM_REPLY = 0x03, - D2H_DEBUG_READ_FM_REPLY = 0x07, - D2H_DEBUG_WRITE_DM_REPLY = 0x0b, - D2H_DEBUG_WRITE_FM_REPLY = 0x0f, - D2H_ERROR_ADDR_UNKNOWN = 0x33, - - D2H_AUTONOMOUS_MODEM_READY_MSG = 0xf1 -} DSL_CmvOpcode_t; - -/* mutex macros */ -#define MEI_MUTEX_INIT(id,flag) \ - sema_init(&id,flag) -#define MEI_MUTEX_LOCK(id) \ - down_interruptible(&id) -#define MEI_MUTEX_UNLOCK(id) \ - up(&id) -#define MEI_WAIT(ms) \ - {\ - set_current_state(TASK_INTERRUPTIBLE);\ - schedule_timeout(ms);\ - } -#define MEI_INIT_WAKELIST(name,queue) \ - init_waitqueue_head(&queue) - -/* wait for an event, timeout is measured in ms */ -#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\ - interruptible_sleep_on_timeout(&ev,timeout * HZ / 1000) -#define MEI_WAKEUP_EVENT(ev)\ - wake_up_interruptible(&ev) -#endif /* IFX_MEI_BSP */ - -/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ -#define ME_DX_DATA (0x0000) -#define ME_VERSION (0x0004) -#define ME_ARC_GP_STAT (0x0008) -#define ME_DX_STAT (0x000C) -#define ME_DX_AD (0x0010) -#define ME_DX_MWS (0x0014) -#define ME_ME2ARC_INT (0x0018) -#define ME_ARC2ME_STAT (0x001C) -#define ME_ARC2ME_MASK (0x0020) -#define ME_DBG_WR_AD (0x0024) -#define ME_DBG_RD_AD (0x0028) -#define ME_DBG_DATA (0x002C) -#define ME_DBG_DECODE (0x0030) -#define ME_CONFIG (0x0034) -#define ME_RST_CTRL (0x0038) -#define ME_DBG_MASTER (0x003C) -#define ME_CLK_CTRL (0x0040) -#define ME_BIST_CTRL (0x0044) -#define ME_BIST_STAT (0x0048) -#define ME_XDATA_BASE_SH (0x004c) -#define ME_XDATA_BASE (0x0050) -#define ME_XMEM_BAR_BASE (0x0054) -#define ME_XMEM_BAR0 (0x0054) -#define ME_XMEM_BAR1 (0x0058) -#define ME_XMEM_BAR2 (0x005C) -#define ME_XMEM_BAR3 (0x0060) -#define ME_XMEM_BAR4 (0x0064) -#define ME_XMEM_BAR5 (0x0068) -#define ME_XMEM_BAR6 (0x006C) -#define ME_XMEM_BAR7 (0x0070) -#define ME_XMEM_BAR8 (0x0074) -#define ME_XMEM_BAR9 (0x0078) -#define ME_XMEM_BAR10 (0x007C) -#define ME_XMEM_BAR11 (0x0080) -#define ME_XMEM_BAR12 (0x0084) -#define ME_XMEM_BAR13 (0x0088) -#define ME_XMEM_BAR14 (0x008C) -#define ME_XMEM_BAR15 (0x0090) -#define ME_XMEM_BAR16 (0x0094) - -#define WHILE_DELAY 20000 -/* -** Define where in ME Processor's memory map the Stratify chip lives -*/ - -#define MAXSWAPSIZE (8 * 1024) //8k *(32bits) - -// Mailboxes -#define MSG_LENGTH 16 // x16 bits -#define YES_REPLY 1 -#define NO_REPLY 0 - -#define CMV_TIMEOUT 1000 //jiffies - -// Block size per BAR -#define SDRAM_SEGMENT_SIZE (64*1024) -// Number of Bar registers -#define MAX_BAR_REGISTERS (17) - -#define XDATA_REGISTER (15) - -// ARC register addresss -#define ARC_STATUS 0x0 -#define ARC_LP_START 0x2 -#define ARC_LP_END 0x3 -#define ARC_DEBUG 0x5 -#define ARC_INT_MASK 0x10A - -#define IRAM0_BASE (0x00000) -#define IRAM1_BASE (0x04000) -#if defined(CONFIG_DANUBE) -#define BRAM_BASE (0x0A000) -#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9) -#define BRAM_BASE (0x08000) -#endif -#define XRAM_BASE (0x18000) -#define YRAM_BASE (0x1A000) -#define EXT_MEM_BASE (0x80000) -#define ARC_GPIO_CTRL (0xC030) -#define ARC_GPIO_DATA (0xC034) - -#define IRAM0_SIZE (16*1024) -#define IRAM1_SIZE (16*1024) -#define BRAM_SIZE (12*1024) -#define XRAM_SIZE (8*1024) -#define YRAM_SIZE (8*1024) -#define EXT_MEM_SIZE (1536*1024) - -#define ADSL_BASE (0x20000) -#define CRI_BASE (ADSL_BASE + 0x11F00) -#define CRI_CCR0 (CRI_BASE + 0x00) -#define CRI_RST (CRI_BASE + 0x04*4) -#define ADSL_DILV_BASE (ADSL_BASE+0x20000) - -// -#define IRAM0_ADDR_BIT_MASK 0xFFF -#define IRAM1_ADDR_BIT_MASK 0xFFF -#define BRAM_ADDR_BIT_MASK 0xFFF -#define RX_DILV_ADDR_BIT_MASK 0x1FFF - -/*** Bit definitions ***/ -#define ARC_AUX_HALT (1 << 25) -#define ARC_DEBUG_HALT (1 << 1) -#define FALSE 0 -#define TRUE 1 -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -// CRI_CCR0 Register definitions -#define CLK_2M_MODE_ENABLE BIT6 -#define ACL_CLK_MODE_ENABLE BIT4 -#define FDF_CLK_MODE_ENABLE BIT2 -#define STM_CLK_MODE_ENABLE BIT0 - -// CRI_RST Register definitions -#define FDF_SRST BIT3 -#define MTE_SRST BIT2 -#define FCI_SRST BIT1 -#define AAI_SRST BIT0 - -// MEI_TO_ARC_INTERRUPT Register definitions -#define MEI_TO_ARC_INT1 BIT3 -#define MEI_TO_ARC_INT0 BIT2 -#define MEI_TO_ARC_CS_DONE BIT1 //need to check -#define MEI_TO_ARC_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT Register definitions -#define ARC_TO_MEI_INT1 BIT8 -#define ARC_TO_MEI_INT0 BIT7 -#define ARC_TO_MEI_CS_REQ BIT6 -#define ARC_TO_MEI_DBG_DONE BIT5 -#define ARC_TO_MEI_MSGACK BIT4 -#define ARC_TO_MEI_NO_ACCESS BIT3 -#define ARC_TO_MEI_CHECK_AAITX BIT2 -#define ARC_TO_MEI_CHECK_AAIRX BIT1 -#define ARC_TO_MEI_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT_MASK Register definitions -#define GP_INT1_EN BIT8 -#define GP_INT0_EN BIT7 -#define CS_REQ_EN BIT6 -#define DBG_DONE_EN BIT5 -#define MSGACK_EN BIT4 -#define NO_ACC_EN BIT3 -#define AAITX_EN BIT2 -#define AAIRX_EN BIT1 -#define MSGAV_EN BIT0 - -#define MEI_SOFT_RESET BIT0 - -#define HOST_MSTR BIT0 - -#define JTAG_MASTER_MODE 0x0 -#define MEI_MASTER_MODE HOST_MSTR - -// MEI_DEBUG_DECODE Register definitions -#define MEI_DEBUG_DEC_MASK (0x3) -#define MEI_DEBUG_DEC_AUX_MASK (0x0) -#define ME_DBG_DECODE_DMP1_MASK (0x1) -#define MEI_DEBUG_DEC_DMP2_MASK (0x2) -#define MEI_DEBUG_DEC_CORE_MASK (0x3) - -#define AUX_STATUS (0x0) -#define AUX_ARC_GPIO_CTRL (0x10C) -#define AUX_ARC_GPIO_DATA (0x10D) -// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate -// page swap requests. -#if defined(CONFIG_DANUBE) -#define OMBOX_BASE 0xDF80 -#define ARC_TO_MEI_MAILBOX 0xDFA0 -#define IMBOX_BASE 0xDFC0 -#define MEI_TO_ARC_MAILBOX 0xDFD0 -#elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9) -#define OMBOX_BASE 0xAF80 -#define ARC_TO_MEI_MAILBOX 0xAFA0 -#define IMBOX_BASE 0xAFC0 -#define MEI_TO_ARC_MAILBOX 0xAFD0 -#endif - -#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) -#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) -#define OMBOX1 (OMBOX_BASE+0x4) - -// Codeswap request messages are indicated by setting BIT31 -#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) - -// Clear Eoc messages received are indicated by setting BIT17 -#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) -#define OMB_REBOOT_INTERRUPT_CODE (1 << 18) - -/* -** Swap page header -*/ -// Page must be loaded at boot time if size field has BIT31 set -#define BOOT_FLAG (BIT31) -#define BOOT_FLAG_MASK ~BOOT_FLAG - -#define FREE_RELOAD 1 -#define FREE_SHOWTIME 2 -#define FREE_ALL 3 - -// marcos -#define IFX_MEI_WRITE_REGISTER_L(data,addr) *((volatile u32*)(addr)) = (u32)(data) -#define IFX_MEI_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -//#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -#define ALIGN_SIZE ( 1L<<10 ) //1K size align -#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) - -// swap marco -#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} -#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} - - -#ifdef CONFIG_PROC_FS -typedef struct reg_entry -{ - int *flag; - char name[30]; /* big enough to hold names */ - char description[100]; /* big enough to hold description */ - unsigned short low_ino; -} reg_entry_t; -#endif -// Swap page header describes size in 32-bit words, load location, and image offset -// for program and/or data segments -typedef struct _arc_swp_page_hdr { - u32 p_offset; //Offset bytes of progseg from beginning of image - u32 p_dest; //Destination addr of progseg on processor - u32 p_size; //Size in 32-bitwords of program segment - u32 d_offset; //Offset bytes of dataseg from beginning of image - u32 d_dest; //Destination addr of dataseg on processor - u32 d_size; //Size in 32-bitwords of data segment -} ARC_SWP_PAGE_HDR; - -/* -** Swap image header -*/ -#define GET_PROG 0 // Flag used for program mem segment -#define GET_DATA 1 // Flag used for data mem segment - -// Image header contains size of image, checksum for image, and count of -// page headers. Following that are 'count' page headers followed by -// the code and/or data segments to be loaded -typedef struct _arc_img_hdr { - u32 size; // Size of binary image in bytes - u32 checksum; // Checksum for image - u32 count; // Count of swp pages in image - ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy -} ARC_IMG_HDR; - -typedef struct smmu_mem_info { - int type; - int boot; - unsigned long nCopy; - unsigned long size; - unsigned char *address; - unsigned char *org_address; -} smmu_mem_info_t; - -#ifdef __KERNEL__ -typedef struct ifx_mei_device_private { - int modem_ready; - int arcmsgav; - int cmv_reply; - int cmv_waiting; - // Mei to ARC CMV count, reply count, ARC Indicator count - int modem_ready_cnt; - int cmv_count; - int reply_count; - unsigned long image_size; - int nBar; - u16 Recent_indicator[MSG_LENGTH]; - - u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); - - smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS]; - ARC_IMG_HDR *img_hdr; - // to wait for arc cmv reply, sleep on wait_queue_arcmsgav; - wait_queue_head_t wait_queue_arcmsgav; - wait_queue_head_t wait_queue_modemready; - struct semaphore mei_cmv_sema; -} ifx_mei_device_private_t; -#endif -typedef struct winhost_message { - union { - u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); - u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); - } msg; -} DSL_DEV_WinHost_Message_t; -/******************************************************************************************************** - * DSL CPE API Driver Stack Interface Definitions - * *****************************************************************************************************/ -/** IOCTL codes for bsp driver */ -#define DSL_IOC_MEI_BSP_MAGIC 's' - -#define DSL_FIO_BSP_DSL_START _IO (DSL_IOC_MEI_BSP_MAGIC, 0) -#define DSL_FIO_BSP_RUN _IO (DSL_IOC_MEI_BSP_MAGIC, 1) -#define DSL_FIO_BSP_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 2) -#define DSL_FIO_BSP_RESET _IO (DSL_IOC_MEI_BSP_MAGIC, 3) -#define DSL_FIO_BSP_REBOOT _IO (DSL_IOC_MEI_BSP_MAGIC, 4) -#define DSL_FIO_BSP_HALT _IO (DSL_IOC_MEI_BSP_MAGIC, 5) -#define DSL_FIO_BSP_BOOTDOWNLOAD _IO (DSL_IOC_MEI_BSP_MAGIC, 6) -#define DSL_FIO_BSP_JTAG_ENABLE _IO (DSL_IOC_MEI_BSP_MAGIC, 7) -#define DSL_FIO_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 8) -#define DSL_FIO_ARC_MUX_TEST _IO (DSL_IOC_MEI_BSP_MAGIC, 9) -#define DSL_FIO_BSP_REMOTE _IOW (DSL_IOC_MEI_BSP_MAGIC, 10, u32) -#define DSL_FIO_BSP_GET_BASE_ADDRESS _IOR (DSL_IOC_MEI_BSP_MAGIC, 11, u32) -#define DSL_FIO_BSP_IS_MODEM_READY _IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32) -#define DSL_FIO_BSP_GET_VERSION _IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t) -#define DSL_FIO_BSP_CMV_WINHOST _IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, DSL_DEV_WinHost_Message_t) -#define DSL_FIO_BSP_CMV_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, DSL_DEV_MeiReg_t) -#define DSL_FIO_BSP_CMV_WRITE _IOW (DSL_IOC_MEI_BSP_MAGIC, 16, DSL_DEV_MeiReg_t) -#define DSL_FIO_BSP_DEBUG_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, DSL_DEV_MeiDebug_t) -#define DSL_FIO_BSP_DEBUG_WRITE _IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, DSL_DEV_MeiDebug_t) -#define DSL_FIO_BSP_GET_CHIP_INFO _IOR (DSL_IOC_MEI_BSP_MAGIC, 19, DSL_DEV_HwVersion_t) - -#define DSL_DEV_MEIDEBUG_BUFFER_SIZES 512 - -typedef struct DSL_DEV_MeiDebug -{ - DSL_uint32_t iAddress; - DSL_uint32_t iCount; - DSL_uint32_t buffer[DSL_DEV_MEIDEBUG_BUFFER_SIZES]; -} DSL_DEV_MeiDebug_t; /* meidebug */ - -/** - * Structure is used for debug access only. - * Refer to configure option INCLUDE_ADSL_WINHOST_DEBUG */ -typedef struct struct_meireg -{ - /* - * Specifies that address for debug access */ - unsigned long iAddress; - /* - * Specifies the pointer to the data that has to be written or returns a - * pointer to the data that has been read out*/ - unsigned long iData; -} DSL_DEV_MeiReg_t; /* meireg */ - -typedef struct DSL_DEV_Device -{ - DSL_int_t nInUse; /* modem state, update by bsp driver, */ - DSL_void_t *pPriv; - DSL_uint32_t base_address; /* mei base address */ - DSL_int_t nIrq[2]; /* irq number */ -#define IFX_DFEIR 0 -#define IFX_DYING_GASP 1 - DSL_DEV_MeiDebug_t lop_debugwr; /* dying gasp */ -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)) - struct module *owner; -#endif -} DSL_DEV_Device_t; /* ifx_adsl_device_t */ - -#define DSL_DEV_PRIVATE(dev) ((ifx_mei_device_private_t*)(dev->pPriv)) - -typedef struct DSL_DEV_Version /* ifx_adsl_bsp_version */ -{ - unsigned long major; - unsigned long minor; - unsigned long revision; -} DSL_DEV_Version_t; /* ifx_adsl_bsp_version_t */ - -typedef struct DSL_DEV_ChipInfo -{ - unsigned long major; - unsigned long minor; -} DSL_DEV_HwVersion_t; - -typedef struct -{ - DSL_uint8_t dummy; -} DSL_DEV_DeviceConfig_t; - -/** error code definitions */ -typedef enum DSL_DEV_MeiError -{ - DSL_DEV_MEI_ERR_SUCCESS = 0, - DSL_DEV_MEI_ERR_FAILURE = -1, - DSL_DEV_MEI_ERR_MAILBOX_FULL = -2, - DSL_DEV_MEI_ERR_MAILBOX_EMPTY = -3, - DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT = -4 -} DSL_DEV_MeiError_t; /* MEI_ERROR */ - -typedef enum { - DSL_BSP_MEMORY_READ=0, - DSL_BSP_MEMORY_WRITE, -} DSL_BSP_MemoryAccessType_t; /* ifx_adsl_memory_access_type_t */ - -typedef enum -{ - DSL_LED_LINK_ID=0, - DSL_LED_DATA_ID -} DSL_DEV_LedId_t; /* ifx_adsl_led_id_t */ - -typedef enum -{ - DSL_LED_LINK_TYPE=0, - DSL_LED_DATA_TYPE -} DSL_DEV_LedType_t; /* ifx_adsl_led_type_t */ - -typedef enum -{ - DSL_LED_HD_CPU=0, - DSL_LED_HD_FW -} DSL_DEV_LedHandler_t; /* ifx_adsl_led_handler_t */ - -typedef enum { - DSL_LED_ON=0, - DSL_LED_OFF, - DSL_LED_FLASH, -} DSL_DEV_LedMode_t; /* ifx_adsl_led_mode_t */ - -typedef enum { - DSL_CPU_HALT=0, - DSL_CPU_RUN, - DSL_CPU_RESET, -} DSL_DEV_CpuMode_t; /* ifx_adsl_cpu_mode_t */ - -#if 0 -typedef enum { - DSL_BSP_EVENT_DYING_GASP = 0, - DSL_BSP_EVENT_CEOC_IRQ, -} DSL_BSP_Event_id_t; /* ifx_adsl_event_id_t */ - -typedef union DSL_BSP_CB_Param -{ - DSL_uint32_t nIrqMessage; -} DSL_BSP_CB_Param_t; /* ifx_adsl_cbparam_t */ - -typedef struct DSL_BSP_CB_Event -{ - DSL_BSP_Event_id_t nID; - DSL_DEV_Device_t *pDev; - DSL_BSP_CB_Param_t *pParam; -} DSL_BSP_CB_Event_t; /* ifx_adsl_cb_event_t */ -#endif - -/* external functions (from the BSP Driver) */ -extern DSL_DEV_Device_t* DSL_BSP_DriverHandleGet(int, int); -extern DSL_int_t DSL_BSP_DriverHandleDelete(DSL_DEV_Device_t *); -extern DSL_DEV_MeiError_t DSL_BSP_FWDownload(DSL_DEV_Device_t *, const DSL_char_t *, DSL_uint32_t, DSL_int32_t *, DSL_int32_t *); -extern int DSL_BSP_KernelIoctls(DSL_DEV_Device_t *, unsigned int, unsigned long); -extern DSL_DEV_MeiError_t DSL_BSP_SendCMV(DSL_DEV_Device_t *, DSL_uint16_t *, DSL_int_t, DSL_uint16_t *); -extern DSL_DEV_MeiError_t DSL_BSP_AdslLedInit(DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t); -extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t); -extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void)); -extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t); -extern volatile DSL_DEV_Device_t *adsl_dev; - -/** - * Dummy structure by now to show mechanism of extended data that will be - * provided within event callback itself. - * */ -typedef struct -{ - /** - * Dummy value */ - DSL_uint32_t nDummy1; -} DSL_BSP_CB_Event1DataDummy_t; - -/** - * Dummy structure by now to show mechanism of extended data that will be - * provided within event callback itself. - * */ -typedef struct -{ - /** - * Dummy value */ - DSL_uint32_t nDummy2; -} DSL_BSP_CB_Event2DataDummy_t; - -/** - * encapsulate all data structures that are necessary for status event - * callbacks. - * */ -typedef union -{ - DSL_BSP_CB_Event1DataDummy_t dataEvent1; - DSL_BSP_CB_Event2DataDummy_t dataEvent2; -} DSL_BSP_CB_DATA_Union_t; - - -typedef enum -{ - /** - * Informs the upper layer driver (DSL CPE API) about a reboot request from the - * firmware. - * \note This event does NOT include any additional data. - * More detailed information upon reboot reason has to be requested from - * upper layer software via CMV (INFO 109) if necessary. */ - DSL_BSP_CB_FIRST = 0, - DSL_BSP_CB_DYING_GASP, - DSL_BSP_CB_CEOC_IRQ, - DSL_BSP_CB_FIRMWARE_REBOOT, - /** - * Delimiter only */ - DSL_BSP_CB_LAST -} DSL_BSP_CB_Type_t; - -/** - * Specifies the common event type that has to be used for registering and - * signalling of interrupts/autonomous status events from MEI BSP Driver. - * - * \param pDev - * Context pointer from MEI BSP Driver. - * - * \param IFX_ADSL_BSP_CallbackType_t - * Specifies the event callback type (reason of callback). Regrading to the - * setting of this value the data which is included in the following union - * might have different meanings. - * Please refer to the description of the union to get information about the - * meaning of the included data. - * - * \param pData - * Data according to \ref DSL_BSP_CB_DATA_Union_t. - * If this pointer is NULL there is no additional data available. - * - * \return depending on event - */ -typedef int (*DSL_BSP_EventCallback_t) -( - DSL_DEV_Device_t *pDev, - DSL_BSP_CB_Type_t nCallbackType, - DSL_BSP_CB_DATA_Union_t *pData -); - -typedef struct { - DSL_BSP_EventCallback_t function; - DSL_BSP_CB_Type_t event; - DSL_BSP_CB_DATA_Union_t *pData; -} DSL_BSP_EventCallBack_t; - -extern int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *); -extern int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *); - -/** Modem states */ -#define DSL_DEV_STAT_InitState 0x0000 -#define DSL_DEV_STAT_ReadyState 0x0001 -#define DSL_DEV_STAT_FailState 0x0002 -#define DSL_DEV_STAT_IdleState 0x0003 -#define DSL_DEV_STAT_QuietState 0x0004 -#define DSL_DEV_STAT_GhsState 0x0005 -#define DSL_DEV_STAT_FullInitState 0x0006 -#define DSL_DEV_STAT_ShowTimeState 0x0007 -#define DSL_DEV_STAT_FastRetrainState 0x0008 -#define DSL_DEV_STAT_LoopDiagMode 0x0009 -#define DSL_DEV_STAT_ShortInit 0x000A /* Bis short initialization */ - -#define DSL_DEV_STAT_CODESWAP_COMPLETE 0x0002 - -#endif //IFXMIPS_MEI_H |