diff options
| -rw-r--r-- | target/linux/ramips/Makefile | 2 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips | 4 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/MT7628.dts | 59 | ||||
| -rw-r--r-- | target/linux/ramips/dts/mt7621.dtsi | 2 | ||||
| -rw-r--r-- | target/linux/ramips/dts/mt7628an.dtsi | 222 | ||||
| -rw-r--r-- | target/linux/ramips/image/Makefile | 12 | ||||
| -rw-r--r-- | target/linux/ramips/mt7628/config-3.14 | 184 | ||||
| -rw-r--r-- | target/linux/ramips/mt7628/profiles/00-default.mk | 18 | ||||
| -rw-r--r-- | target/linux/ramips/mt7628/target.mk | 15 |
11 files changed, 518 insertions, 4 deletions
diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile index cf1b9e8311..d3d2db789b 100644 --- a/target/linux/ramips/Makefile +++ b/target/linux/ramips/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk ARCH:=mipsel BOARD:=ramips BOARDNAME:=Ralink RT288x/RT3xxx -SUBTARGETS:=rt305x mt7620a mt7620n mt7621 rt3883 rt288x +SUBTARGETS:=rt305x mt7620a mt7620n mt7621 mt7628 rt3883 rt288x FEATURES:=squashfs gpio MAINTAINER:=John Crispin <blogic@openwrt.org> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 924be3665e..a53a032b7d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -115,6 +115,7 @@ ramips_setup_interfaces() dir-320-b1 | \ dir-615-h1 | \ hlk-rm04 | \ + mt7628 | \ mzk-w300nh2 | \ mzk-750dhp | \ whr-300hp2 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips index ab87421bb9..cae6396a73 100644 --- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips +++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips @@ -6,12 +6,12 @@ . /lib/ramips.sh ramips_set_preinit_iface() { - RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` + RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350|MT7628)"` if [ -n "${RT3X5X}" ]; then swconfig dev rt305x set reset 1 fi - if echo $RT3X5X | grep -q RT5350; then + if echo $RT3X5X | egrep -q "(RT5350|MT7628)"; then # This is a dirty hack to get by while the switch # problem is investigated. When VLAN is disabled, ICMP # pings work as expected, but TCP connections time diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index e42f719cd8..7538876697 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -355,6 +355,9 @@ ramips_board_detect() { *"Lenovo Y1S") name="y1s" ;; + *"Mediatek MT7628AN evaluation board") + name="mt7628" + ;; *) name="generic" ;; diff --git a/target/linux/ramips/dts/MT7628.dts b/target/linux/ramips/dts/MT7628.dts new file mode 100644 index 0000000000..9542117e19 --- /dev/null +++ b/target/linux/ramips/dts/MT7628.dts @@ -0,0 +1,59 @@ +/dts-v1/; + +/include/ "mt7628an.dtsi" + +/ { + compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc"; + model = "Mediatek MT7628AN evaluation board"; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + m25p,chunked-io = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pcie@10140000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 83df878e9c..e00ddd2c0a 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -232,7 +232,7 @@ phy-mode = "rgmii"; interrupt-parent = <&gic>; - interrupts = <23>; + interrupts = <23>; }; }; }; diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi new file mode 100644 index 0000000000..1f3876975d --- /dev/null +++ b/target/linux/ramips/dts/mt7628an.dtsi @@ -0,0 +1,222 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,mtk7628an-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,mt7620a-sysc"; + reg = <0x0 0x100>; + }; + + watchdog@120 { + compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt"; + reg = <0x120 0x10>; + + resets = <&rstctrl 8>; + reset-names = "wdt"; + + interrupt-parent = <&intc>; + interrupts = <24>; + }; + + intc: intc@200 { + compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + resets = <&rstctrl 9>; + reset-names = "intc"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + + ralink,intc-registers = <0x9c 0xa0 + 0x6c 0xa4 + 0x80 0x78>; + }; + + memc@300 { + compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + + resets = <&rstctrl 20>; + reset-names = "mc"; + + interrupt-parent = <&intc>; + interrupts = <3>; + }; + + gpio@600 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio"; + reg = <0x600 0x100>; + + gpio0: bank@0 { + reg = <0>; + compatible = "mtk,mt7621-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio1: bank@1 { + reg = <1>; + compatible = "mtk,mt7621-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: bank@2 { + reg = <2>; + compatible = "mtk,mt7621-gpio-bank"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + spi@b00 { + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + + resets = <&rstctrl 18>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + + status = "disabled"; + }; + + uartlite@c00 { + compatible = "ns16550a"; + reg = <0xc00 0x100>; + + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test; + + resets = <&rstctrl 12>; + reset-names = "uartl"; + + interrupt-parent = <&intc>; + interrupts = <20>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + }; + }; + + pinctrl { + compatible = "ralink,rt2880-pinmux"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + state_default: pinctrl0 { + }; + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + uart0_pins: uartlite { + uart { + ralink,group = "uart0"; + ralink,function = "uart"; + }; + }; + }; + + rstctrl: rstctrl { + compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset"; + #reset-cells = <1>; + }; + + usbphy { + compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy"; + + resets = <&rstctrl 22>; + reset-names = "host"; + }; + + ehci@101c0000 { + compatible = "ralink,rt3xxx-ehci"; + reg = <0x101c0000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; + + ohci@101c1000 { + compatible = "ralink,rt3xxx-ohci"; + reg = <0x101c1000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; + + ethernet@10100000 { + compatible = "ralink,rt5350-eth"; + reg = <0x10100000 10000>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + }; + + esw@10110000 { + compatible = "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + + pcie@10140000 { + compatible = "mediatek,mt7620-pci"; + reg = <0x10140000 0x100 + 0x10142000 0x100>; + + ranges = <0x2000000 0 0x8000000 0x2000000 0 0x1000000 /* pci memory */ + 0x1000000 0 0x00000000 0x10160000 0 0x10000>; /* io space */ + + resets = <&rstctrl 26>; + reset-names = "pcie0"; + + interrupt-parent = <&cpuintc>; + interrupts = <4>; + + status = "disabled"; + + pcie-bridge { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + }; + }; + +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 58bfd6dfe4..4362d4c3b3 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -848,6 +848,18 @@ define Image/Build/Profile/Default endef endif +# +# MT7628 Profiles +# + +Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628) + +ifeq ($(SUBTARGET),mt7628) +define Image/Build/Profile/Default + $(call Image/Build/Profile/MT7628,$(1)) +endef +endif + # # Generic Targets diff --git a/target/linux/ramips/mt7628/config-3.14 b/target/linux/ramips/mt7628/config-3.14 new file mode 100644 index 0000000000..4296586c1a --- /dev/null +++ b/target/linux/ramips/mt7628/config-3.14 @@ -0,0 +1,184 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_AT803X_PHY=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKEVT_RT3352=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_MT7620A_EVAL is not set +# CONFIG_DTB_MT7628AN_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_MT7621=y +# CONFIG_GPIO_RALINK is not set +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_ICPLUS_PHY=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INET_LRO=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MT7621_WDT=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_MT7620=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_ESW_RT3052=y +# CONFIG_NET_RALINK_MT7620 is not set +CONFIG_NET_RALINK_RT305X=y +CONFIG_NLS=m +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +CONFIG_RALINK_USBPHY=y +# CONFIG_RALINK_WDT is not set +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_MT7620=y +# CONFIG_SOC_MT7621 is not set +# CONFIG_SOC_RT288X is not set +# CONFIG_SOC_RT305X is not set +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/mt7628/profiles/00-default.mk b/target/linux/ramips/mt7628/profiles/00-default.mk new file mode 100644 index 0000000000..6c7d721444 --- /dev/null +++ b/target/linux/ramips/mt7628/profiles/00-default.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2011 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Default + NAME:=Default Profile + PACKAGES:=\ + kmod-usb-core kmod-usb2 kmod-usb-ohci \ + kmod-ledtrig-usbdev +endef + +define Profile/Default/Description + Default package set compatible with most boards. +endef +$(eval $(call Profile,Default)) diff --git a/target/linux/ramips/mt7628/target.mk b/target/linux/ramips/mt7628/target.mk new file mode 100644 index 0000000000..22697210a1 --- /dev/null +++ b/target/linux/ramips/mt7628/target.mk @@ -0,0 +1,15 @@ +# +# Copyright (C) 2009 OpenWrt.org +# + +SUBTARGET:=mt7628 +BOARDNAME:=MT7628 based boards +ARCH_PACKAGES:=ramips_24kec +FEATURES+=usb +CPU_TYPE:=24kec +CPU_SUBTYPE:=dsp + +define Target/Description + Build firmware images for Ralink MT7628 based boards. +endef + |