diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2009-09-26 11:48:48 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2009-09-26 11:48:48 +0000 |
commit | 8673372e20aa8ef53946ae606e1746f6abc39b1a (patch) | |
tree | f637b6541d53e029025d5cc87eb296724891a39c /target/linux | |
parent | 6247141e7835a4bbf5850c9e94ae8c9a61eb20cf (diff) | |
download | master-31e0f0ae-8673372e20aa8ef53946ae606e1746f6abc39b1a.tar.gz master-31e0f0ae-8673372e20aa8ef53946ae606e1746f6abc39b1a.tar.bz2 master-31e0f0ae-8673372e20aa8ef53946ae606e1746f6abc39b1a.zip |
add patches for kernel 2.6.31
This is completly untested. Only a compile tests with the default config was done!
SVN-Revision: 17734
Diffstat (limited to 'target/linux')
27 files changed, 3109 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/config-2.6.31 b/target/linux/brcm47xx/config-2.6.31 new file mode 100644 index 0000000000..7c89e19363 --- /dev/null +++ b/target/linux/brcm47xx/config-2.6.31 @@ -0,0 +1,179 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARPD is not set +CONFIG_B44=y +CONFIG_B44_PCI=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_BASE_SMALL=0 +CONFIG_BCM47XX=y +CONFIG_BCM47XX_WDT=y +# CONFIG_BINARY_PRINTF is not set +CONFIG_BITREVERSE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CFE=y +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" +CONFIG_CONSTRUCTORS=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_FSNOTIFY is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAMRADIO is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +# CONFIG_IMAGE_CMDLINE_HACK is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +CONFIG_KALLSYMS=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEMOTE_FULONG is not set +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_FPU_EMU is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MTD_BCM47XX=y +# CONFIG_NATSEMI is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_PHYLIB=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROC_KCORE is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLOW_WORK is not set +CONFIG_SSB=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_DEBUG=y +CONFIG_SSB_DRIVER_EXTIF=y +CONFIG_SSB_DRIVER_GIGE=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_PCICORE_HOSTMODE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_SERIAL=y +CONFIG_SSB_SPROM=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TC35815 is not set +CONFIG_TICK_ONESHOT=y +CONFIG_TRACING_SUPPORT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB_SUPPORT=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm47xx/patches-2.6.31/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.31/100-board_support.patch new file mode 100644 index 0000000000..b7291e66b1 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/100-board_support.patch @@ -0,0 +1,25 @@ +--- a/arch/mips/include/asm/bootinfo.h ++++ b/arch/mips/include/asm/bootinfo.h +@@ -57,6 +57,12 @@ + #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ + #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ + ++/* ++ * Valid machtype for group Broadcom ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom */ ++#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + extern char *system_type; +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -2085,6 +2085,7 @@ + #define PCI_DEVICE_ID_TIGON3_5906M 0x1713 + #define PCI_DEVICE_ID_BCM4401 0x4401 + #define PCI_DEVICE_ID_BCM4401B0 0x4402 ++#define PCI_DEVICE_ID_BCM4713 0x4713 + + #define PCI_VENDOR_ID_TOPIC 0x151f + #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 diff --git a/target/linux/brcm47xx/patches-2.6.31/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.31/110-flash_map.patch new file mode 100644 index 0000000000..a2c3fab795 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/110-flash_map.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -327,6 +327,12 @@ config MTD_CFI_FLAGADM + Mapping for the Flaga digital module. If you don't have one, ignore + this setting. + ++config MTD_BCM47XX ++ tristate "BCM47xx flash device" ++ depends on MIPS && MTD_CFI && BCM47XX ++ help ++ Support for the flash chips on the BCM947xx board. ++ + config MTD_REDWOOD + tristate "CFI Flash devices mapped on IBM Redwood" + depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -28,6 +28,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcms + obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o + obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o + obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o ++obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o + obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o + obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o + obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o diff --git a/target/linux/brcm47xx/patches-2.6.31/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.31/130-remove_scache.patch new file mode 100644 index 0000000000..46aaaca0ee --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/130-remove_scache.patch @@ -0,0 +1,89 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -215,7 +215,6 @@ config MIPS_MALTA + select I8259 + select MIPS_BOARDS_GEN + select MIPS_BONITO64 +- select MIPS_CPU_SCACHE + select PCI_GT64XXX_PCI0 + select MIPS_MSC + select SWAP_IO_SPACE +@@ -1518,13 +1517,6 @@ config IP22_CPU_SCACHE + bool + select BOARD_SCACHE + +-# +-# Support for a MIPS32 / MIPS64 style S-caches +-# +-config MIPS_CPU_SCACHE +- bool +- select BOARD_SCACHE +- + config R5000_CPU_SCACHE + bool + select BOARD_SCACHE +--- a/arch/mips/kernel/cpu-probe.c ++++ b/arch/mips/kernel/cpu-probe.c +@@ -754,6 +754,8 @@ static inline void cpu_probe_mips(struct + case PRID_IMP_25KF: + c->cputype = CPU_25KF; + __cpu_name[cpu] = "MIPS 25Kc"; ++ /* Probe for L2 cache */ ++ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; + break; + case PRID_IMP_34K: + c->cputype = CPU_34K; +--- a/arch/mips/mm/Makefile ++++ b/arch/mips/mm/Makefile +@@ -33,6 +33,5 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-oct + obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o + obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o + obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o +-obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o + + EXTRA_CFLAGS += -Werror +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -1148,7 +1148,6 @@ static void __init loongson2_sc_init(voi + + extern int r5k_sc_init(void); + extern int rm7k_sc_init(void); +-extern int mips_sc_init(void); + + static void __cpuinit setup_scache(void) + { +@@ -1202,29 +1201,17 @@ static void __cpuinit setup_scache(void) + #endif + + default: +- if (c->isa_level == MIPS_CPU_ISA_M32R1 || +- c->isa_level == MIPS_CPU_ISA_M32R2 || +- c->isa_level == MIPS_CPU_ISA_M64R1 || +- c->isa_level == MIPS_CPU_ISA_M64R2) { +-#ifdef CONFIG_MIPS_CPU_SCACHE +- if (mips_sc_init ()) { +- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; +- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n", +- scache_size >> 10, +- way_string[c->scache.ways], c->scache.linesz); +- } +-#else +- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) +- panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); +-#endif +- return; +- } + sc_present = 0; + } + + if (!sc_present) + return; + ++ if ((c->isa_level == MIPS_CPU_ISA_M32R1 || ++ c->isa_level == MIPS_CPU_ISA_M64R1) && ++ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) ++ panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); ++ + /* compute a couple of other cache variables */ + c->scache.waysize = scache_size / c->scache.ways; + diff --git a/target/linux/brcm47xx/patches-2.6.31/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.31/150-cpu_fixes.patch new file mode 100644 index 0000000000..f5209d4feb --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/150-cpu_fixes.patch @@ -0,0 +1,367 @@ +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -17,6 +17,20 @@ + #include <asm/cpu-features.h> + #include <asm/mipsmtregs.h> + ++#ifdef CONFIG_BCM47XX ++#include <asm/paccess.h> ++#include <linux/ssb/ssb.h> ++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))) ++ ++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) ++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) ++#else ++#define BCM4710_DUMMY_RREG() ++ ++#define BCM4710_FILL_TLB(addr) ++#define BCM4710_PROTECTED_FILL_TLB(addr) ++#endif ++ + /* + * This macro return a properly sign-extended address suitable as base address + * for indexed cache operations. Two issues here: +@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind + static inline void flush_dcache_line_indexed(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Index_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns + static inline void flush_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns + static inline void invalidate_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Invalidate_D, addr); + __dflush_epilogue + } +@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns + */ + static inline void protected_flush_icache_line(unsigned long addr) + { ++ BCM4710_DUMMY_RREG(); + protected_cache_op(Hit_Invalidate_I, addr); + } + +@@ -219,6 +237,7 @@ static inline void protected_flush_icach + */ + static inline void protected_writeback_dcache_line(unsigned long addr) + { ++ BCM4710_DUMMY_RREG(); + protected_cache_op(Hit_Writeback_Inv_D, addr); + } + +@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag + : "r" (base), \ + "i" (op)); + ++static inline void blast_dcache(void) ++{ ++ unsigned long start = KSEG0; ++ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; ++ unsigned long end = (start + dcache_size); ++ ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ ++ BCM4710_FILL_TLB(start); ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Hit_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page_indexed(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; ++ unsigned long ws_end = current_cpu_data.dcache.ways << ++ current_cpu_data.dcache.waybit; ++ unsigned long ws, addr; ++ for (ws = 0; ws < ws_end; ws += ws_inc) { ++ start = page + ws; ++ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, addr); ++ } ++ } ++} ++ ++ + /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ +-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ ++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ + static inline void blast_##pfx##cache##lsize(void) \ + { \ + unsigned long start = INDEX_BASE; \ +@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l + \ + __##pfx##flush_prologue \ + \ ++ war \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ +@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l + \ + __##pfx##flush_prologue \ + \ ++ war \ + do { \ + cache##lsize##_unroll32(start, hitop); \ + start += lsize * 32; \ +@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ ++ war \ ++ \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ +@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l + __##pfx##flush_epilogue \ + } + +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) +- +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) ++ ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) + + /* build blast_xxx_range, protected_blast_xxx_range */ +-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ ++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ + static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ + unsigned long end) \ + { \ + unsigned long lsize = cpu_##desc##_line_size(); \ + unsigned long addr = start & ~(lsize - 1); \ + unsigned long aend = (end - 1) & ~(lsize - 1); \ ++ war \ + \ + __##pfx##flush_prologue \ + \ + while (1) { \ ++ war2 \ + prot##cache_op(hitop, addr); \ + if (addr == aend) \ + break; \ +@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca + __##pfx##flush_epilogue \ + } + +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) +-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) ++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) + /* blast_inv_dcache_range */ +-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) +-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) ++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) + + #endif /* _ASM_R4KCACHE_H */ +--- a/arch/mips/include/asm/stackframe.h ++++ b/arch/mips/include/asm/stackframe.h +@@ -426,6 +426,10 @@ + .macro RESTORE_SP_AND_RET + LONG_L sp, PT_R29(sp) + .set mips3 ++#ifdef CONFIG_BCM47XX ++ nop ++ nop ++#endif + eret + .set mips0 + .endm +--- a/arch/mips/kernel/genex.S ++++ b/arch/mips/kernel/genex.S +@@ -52,6 +52,10 @@ NESTED(except_vec1_generic, 0, sp) + NESTED(except_vec3_generic, 0, sp) + .set push + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++ nop ++#endif + #if R5432_CP0_INTERRUPT_WAR + mfc0 k0, CP0_INDEX + #endif +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -35,6 +35,9 @@ + #include <asm/cacheflush.h> /* for run_uncached() */ + + ++/* For enabling BCM4710 cache workarounds */ ++int bcm4710 = 0; ++ + /* + * Special Variant of smp_call_function for use by cache functions: + * +@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page = blast_dcache_page; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_page = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_page_indexed = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -143,6 +152,9 @@ static void __cpuinit r4k_blast_dcache_s + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache = blast_dcache; ++ else + if (dc_lsize == 0) + r4k_blast_dcache = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -680,6 +692,8 @@ static void local_r4k_flush_cache_sigtra + unsigned long addr = (unsigned long) arg; + + R4600_HIT_CACHEOP_WAR_IMPL; ++ BCM4710_PROTECTED_FILL_TLB(addr); ++ BCM4710_PROTECTED_FILL_TLB(addr + 4); + if (dc_lsize) + protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); + if (!cpu_icache_snoops_remote_store && scache_size) +@@ -1298,6 +1312,17 @@ static void __cpuinit coherency_setup(vo + * silly idea of putting something else there ... + */ + switch (current_cpu_type()) { ++ case CPU_BCM3302: ++ { ++ u32 cm; ++ cm = read_c0_diag(); ++ /* Enable icache */ ++ cm |= (1 << 31); ++ /* Enable dcache */ ++ cm |= (1 << 30); ++ write_c0_diag(cm); ++ } ++ break; + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: +@@ -1354,6 +1379,15 @@ void __cpuinit r4k_cache_init(void) + break; + } + ++ /* Check if special workarounds are required */ ++#ifdef CONFIG_BCM47XX ++ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) { ++ printk("Enabling BCM4710A0 cache workarounds.\n"); ++ bcm4710 = 1; ++ } else ++#endif ++ bcm4710 = 0; ++ + probe_pcache(); + setup_scache(); + +@@ -1412,5 +1446,13 @@ void __cpuinit r4k_cache_init(void) + #if !defined(CONFIG_MIPS_CMP) + local_r4k___flush_cache_all(NULL); + #endif ++#ifdef CONFIG_BCM47XX ++ { ++ static void (*_coherency_setup)(void); ++ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); ++ _coherency_setup(); ++ } ++#else + coherency_setup(); ++#endif + } +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -784,6 +784,9 @@ static void __cpuinit build_r4000_tlb_re + /* No need for uasm_i_nop */ + } + ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++#endif + #ifdef CONFIG_64BIT + build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ + #else +@@ -1238,6 +1241,9 @@ build_r4000_tlbchange_handler_head(u32 * + struct uasm_reloc **r, unsigned int pte, + unsigned int ptr) + { ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + #ifdef CONFIG_64BIT + build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ + #else diff --git a/target/linux/brcm47xx/patches-2.6.31/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.31/160-kmap_coherent.patch new file mode 100644 index 0000000000..5c06f3a4ea --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/160-kmap_coherent.patch @@ -0,0 +1,77 @@ +--- a/arch/mips/include/asm/cpu-features.h ++++ b/arch/mips/include/asm/cpu-features.h +@@ -104,6 +104,9 @@ + #ifndef cpu_has_pindexed_dcache + #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) + #endif ++#ifndef cpu_use_kmap_coherent ++#define cpu_use_kmap_coherent 1 ++#endif + + /* + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors +--- /dev/null ++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h +@@ -0,0 +1,13 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) ++ */ ++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_use_kmap_coherent 0 ++ ++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -507,7 +507,7 @@ static inline void local_r4k_flush_cache + */ + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + vaddr = kmap_coherent(page, addr); + else + vaddr = kmap_atomic(page, KM_USER0); +@@ -530,7 +530,7 @@ static inline void local_r4k_flush_cache + } + + if (vaddr) { +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + kunmap_coherent(); + else + kunmap_atomic(vaddr, KM_USER0); +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -205,7 +205,7 @@ void copy_user_highpage(struct page *to, + void *vfrom, *vto; + + vto = kmap_atomic(to, KM_USER1); +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(from) && !Page_dcache_dirty(from)) { + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); +@@ -227,7 +227,7 @@ void copy_to_user_page(struct vm_area_st + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(page) && !Page_dcache_dirty(page)) { + void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); +@@ -245,7 +245,7 @@ void copy_from_user_page(struct vm_area_ + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(page) && !Page_dcache_dirty(page)) { + void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); diff --git a/target/linux/brcm47xx/patches-2.6.31/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-2.6.31/210-b44_phy_fix.patch new file mode 100644 index 0000000000..a9f4f95620 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/210-b44_phy_fix.patch @@ -0,0 +1,22 @@ +--- a/drivers/net/b44.c ++++ b/drivers/net/b44.c +@@ -339,7 +339,7 @@ static int b44_phy_reset(struct b44 *bp) + } + } + +- return 0; ++ return err; + } + + static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags) +@@ -2221,6 +2221,10 @@ static int __devinit b44_init_one(struct + */ + b44_chip_reset(bp, B44_CHIP_RESET_FULL); + ++ /* do a phy reset to test if there is an active phy */ ++ if (b44_phy_reset(bp) < 0) ++ bp->phy_addr = B44_PHY_ADDR_NO_PHY; ++ + printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n", + dev->name, dev->dev_addr); + diff --git a/target/linux/brcm47xx/patches-2.6.31/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.31/220-bcm5354.patch new file mode 100644 index 0000000000..9adf48414b --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/220-bcm5354.patch @@ -0,0 +1,42 @@ +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -258,6 +258,8 @@ void ssb_chipco_resume(struct ssb_chipco + void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m) + { ++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) ++ return; + *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); + *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); + switch (*plltype) { +@@ -281,6 +283,8 @@ void ssb_chipco_get_clockcpu(struct ssb_ + void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m) + { ++ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) ++ return; + *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); + *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); + switch (*plltype) { +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -217,6 +217,8 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + + if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { + rate = 200000000; ++ } else if (bus->chip_id == 0x5354) { ++ rate = 240000000; + } else { + rate = ssb_calc_clock_rate(pll_type, n, m); + } +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -1010,6 +1010,8 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + + if (bus->chip_id == 0x5365) { + rate = 100000000; ++ } else if (bus->chip_id == 0x5354) { ++ rate = 120000000; + } else { + rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); + if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ diff --git a/target/linux/brcm47xx/patches-2.6.31/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.31/250-ohci-ssb-usb2.patch new file mode 100644 index 0000000000..25b27e47e8 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/250-ohci-ssb-usb2.patch @@ -0,0 +1,60 @@ +--- + drivers/usb/host/ohci-ssb.c | 39 ++++++++++++++++++++++++++++++++++++--- + 1 file changed, 36 insertions(+), 3 deletions(-) + +--- a/drivers/usb/host/ohci-ssb.c ++++ b/drivers/usb/host/ohci-ssb.c +@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de + int err = -ENOMEM; + u32 tmp, flags = 0; + +- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) ++ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { ++ /* Put the device into host-mode. */ + flags |= SSB_OHCI_TMSLOW_HOSTMODE; +- +- ssb_device_enable(dev, flags); ++ ssb_device_enable(dev, flags); ++ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { ++ /* ++ * USB 2.0 special considerations: ++ * ++ * 1. Since the core supports both OHCI and EHCI functions, it must ++ * only be reset once. ++ * ++ * 2. In addition to the standard SSB reset sequence, the Host Control ++ * Register must be programmed to bring the USB core and various ++ * phy components out of reset. ++ */ ++ ssb_device_enable(dev, 0); ++ ssb_write32(dev, 0x200, 0x7ff); ++ udelay(1); ++ if (dev->id.revision == 1) { // bug in rev 1 ++ ++ /* Change Flush control reg */ ++ tmp = ssb_read32(dev, 0x400); ++ tmp &= ~8; ++ ssb_write32(dev, 0x400, tmp); ++ tmp = ssb_read32(dev, 0x400); ++ printk("USB20H fcr: 0x%0x\n", tmp); ++ ++ /* Change Shim control reg */ ++ tmp = ssb_read32(dev, 0x304); ++ tmp &= ~0x100; ++ ssb_write32(dev, 0x304, tmp); ++ tmp = ssb_read32(dev, 0x304); ++ printk("USB20H shim: 0x%0x\n", tmp); ++ } ++ } else ++ ssb_device_enable(dev, 0); + + hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, + dev_name(dev->dev)); +@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de + static const struct ssb_device_id ssb_ohci_table[] = { + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), ++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), + SSB_DEVTABLE_END + }; + MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); diff --git a/target/linux/brcm47xx/patches-2.6.31/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.31/260-ohci-set-dma-mask.patch new file mode 100644 index 0000000000..50dcd5718e --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/260-ohci-set-dma-mask.patch @@ -0,0 +1,16 @@ +--- + drivers/usb/host/ohci-ssb.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/usb/host/ohci-ssb.c ++++ b/drivers/usb/host/ohci-ssb.c +@@ -106,6 +106,9 @@ static int ssb_ohci_attach(struct ssb_de + int err = -ENOMEM; + u32 tmp, flags = 0; + ++ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK)) ++ return -EOPNOTSUPP; ++ + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { + /* Put the device into host-mode. */ + flags |= SSB_OHCI_TMSLOW_HOSTMODE; diff --git a/target/linux/brcm47xx/patches-2.6.31/270-ehci-ssb.patch b/target/linux/brcm47xx/patches-2.6.31/270-ehci-ssb.patch new file mode 100644 index 0000000000..5b205e0e7c --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/270-ehci-ssb.patch @@ -0,0 +1,314 @@ +--- + drivers/usb/host/Kconfig | 13 ++ + drivers/usb/host/ehci-hcd.c | 12 ++ + drivers/usb/host/ehci-ssb.c | 201 ++++++++++++++++++++++++++++++++++++++++++++ + drivers/usb/host/ohci-ssb.c | 23 +++++ + 4 files changed, 247 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -126,6 +126,19 @@ config USB_OXU210HP_HCD + To compile this driver as a module, choose M here: the + module will be called oxu210hp-hcd. + ++config USB_EHCI_HCD_SSB ++ bool "EHCI support for Broadcom SSB EHCI core" ++ depends on USB_EHCI_HCD && SSB && EXPERIMENTAL ++ default n ++ ---help--- ++ Support for the Sonics Silicon Backplane (SSB) attached ++ Broadcom USB EHCI core. ++ ++ This device is present in some embedded devices with ++ Broadcom based SSB bus. ++ ++ If unsure, say N. ++ + config USB_ISP116X_HCD + tristate "ISP116X HCD support" + depends on USB +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1117,8 +1117,16 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ixp4xx_ehci_driver + #endif + +-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ +- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) ++#ifdef CONFIG_USB_EHCI_HCD_SSB ++#include "ehci-ssb.c" ++#define SSB_EHCI_DRIVER ssb_ehci_driver ++#endif ++ ++#if !defined(PCI_DRIVER) && \ ++ !defined(PLATFORM_DRIVER) && \ ++ !defined(PS3_SYSTEM_BUS_DRIVER) && \ ++ !defined(OF_PLATFORM_DRIVER) && \ ++ !defined(SSB_EHCI_DRIVER) + #error "missing bus glue for ehci-hcd" + #endif + +--- /dev/null ++++ b/drivers/usb/host/ehci-ssb.c +@@ -0,0 +1,201 @@ ++/* ++ * Sonics Silicon Backplane ++ * Broadcom USB-core EHCI driver (SSB bus glue) ++ * ++ * Copyright 2007 Steven Brown <sbrown@cortland.com> ++ * ++ * Derived from the OHCI-SSB driver ++ * Copyright 2007 Michael Buesch <mb@bu3sch.de> ++ * ++ * Derived from the EHCI-PCI driver ++ * Copyright (c) 2000-2004 by David Brownell ++ * ++ * Derived from the OHCI-PCI driver ++ * Copyright 1999 Roman Weissgaerber ++ * Copyright 2000-2002 David Brownell ++ * Copyright 1999 Linus Torvalds ++ * Copyright 1999 Gregory P. Smith ++ * ++ * Derived from the USBcore related parts of Broadcom-SB ++ * Copyright 2005 Broadcom Corporation ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include <linux/ssb/ssb.h> ++ ++#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) ++ ++struct ssb_ehci_device { ++ struct ehci_hcd ehci; /* _must_ be at the beginning. */ ++ ++ u32 enable_flags; ++}; ++ ++static inline ++struct ssb_ehci_device *hcd_to_ssb_ehci(struct usb_hcd *hcd) ++{ ++ return (struct ssb_ehci_device *)(hcd->hcd_priv); ++} ++ ++ ++static int ssb_ehci_reset(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int err; ++ ++ ehci->caps = hcd->regs; ++ ehci->regs = hcd->regs + ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ++ dbg_hcs_params(ehci, "reset"); ++ dbg_hcc_params(ehci, "reset"); ++ ++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++ ++ err = ehci_halt(ehci); ++ ++ if (err) ++ return err; ++ ++ err = ehci_init(hcd); ++ ++ if (err) ++ return err; ++ ++ ehci_port_power(ehci, 0); ++ ++ return err; ++} ++ ++static int ssb_ehci_start(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int err; ++ ++ err = ehci_run(hcd); ++ if (err < 0) { ++ ehci_err(ehci, "can't start\n"); ++ ehci_stop(hcd); ++ } ++ ++ return err; ++} ++ ++#ifdef CONFIG_PM ++static int ssb_ehci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message) ++{ ++ struct ssb_ehci_device *ehcidev = hcd_to_ssb_ehci(hcd); ++ struct ehci_hcd *ehci = &ehcidev->ehci; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ehci->lock, flags); ++ ++ ehci_writel(ehci, EHCI_INTR_MIE, &ehci->regs->intrdisable); ++ ehci_readl(ehci, &ehci->regs->intrdisable); /* commit write */ ++ ++ /* make sure snapshot being resumed re-enumerates everything */ ++ if (message.event == PM_EVENT_PRETHAW) ++ ehci_usb_reset(ehci); ++ ++ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); ++ ++ spin_unlock_irqrestore(&ehci->lock, flags); ++ return 0; ++} ++ ++static int ssb_ehci_hcd_resume(struct usb_hcd *hcd) ++{ ++ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); ++ usb_hcd_resume_root_hub(hcd); ++ return 0; ++} ++#endif /* CONFIG_PM */ ++ ++static const struct hc_driver ssb_ehci_hc_driver = { ++ .description = "ssb-usb-ehci", ++ .product_desc = "SSB EHCI Controller", ++ .hcd_priv_size = sizeof(struct ssb_ehci_device), ++ ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ .reset = ssb_ehci_reset, ++ .start = ssb_ehci_start, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++#ifdef CONFIG_PM ++ .suspend = ssb_ehci_hcd_suspend, ++ .resume = ssb_ehci_hcd_resume, ++#endif ++ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ ++ .get_frame_number = ehci_get_frame, ++ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++#ifdef CONFIG_PM ++ .bus_suspend = ehci_bus_suspend, ++ .bus_resume = ehci_bus_resume, ++#endif ++ ++}; ++ ++static void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd) ++{ ++ ++ usb_remove_hcd(hcd); ++ iounmap(hcd->regs); ++ usb_put_hcd(hcd); ++} ++EXPORT_SYMBOL_GPL(ssb_ehci_detach); ++ ++static int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **ehci_hcd) ++{ ++ struct ssb_ehci_device *ehcidev; ++ struct usb_hcd *hcd; ++ int err = -ENOMEM; ++ u32 tmp, flags = 0; ++ ++ hcd = usb_create_hcd(&ssb_ehci_hc_driver, dev->dev, ++ dev_name(dev->dev)); ++ if (!hcd) ++ goto err_dev_disable; ++ ++ ehcidev = hcd_to_ssb_ehci(hcd); ++ ehcidev->enable_flags = flags; ++ tmp = ssb_read32(dev, SSB_ADMATCH0); ++ hcd->rsrc_start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ ++ hcd->rsrc_len = 0x100; /* ehci reg block size */ ++ /* ++ * start & size modified per sbutils.c ++ */ ++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) ++ goto err_put_hcd; ++ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED | IRQF_DISABLED); ++ if (err) ++ goto err_iounmap; ++ ++ *ehci_hcd = hcd; ++ ++ return err; ++ ++err_iounmap: ++ iounmap(hcd->regs); ++err_put_hcd: ++ usb_put_hcd(hcd); ++err_dev_disable: ++ ssb_device_disable(dev, flags); ++ return err; ++} ++EXPORT_SYMBOL_GPL(ssb_ehci_attach); ++ ++static const struct ssb_device_id ssb_ehci_table[] = { ++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), ++ SSB_DEVTABLE_END ++}; ++MODULE_DEVICE_TABLE(ssb, ssb_ehci_table); +--- a/drivers/usb/host/ohci-ssb.c ++++ b/drivers/usb/host/ohci-ssb.c +@@ -17,6 +17,8 @@ + */ + #include <linux/ssb/ssb.h> + ++extern int ssb_ehci_attach(struct ssb_device *dev, struct usb_hcd **hcd); ++extern void ssb_ehci_detach(struct ssb_device *dev, struct usb_hcd *hcd); + + #define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) + +@@ -24,6 +26,7 @@ struct ssb_ohci_device { + struct ohci_hcd ohci; /* _must_ be at the beginning. */ + + u32 enable_flags; ++ struct usb_hcd *ehci_hcd; + }; + + static inline +@@ -92,13 +95,25 @@ static const struct hc_driver ssb_ohci_h + static void ssb_ohci_detach(struct ssb_device *dev) + { + struct usb_hcd *hcd = ssb_get_drvdata(dev); ++#ifdef CONFIG_USB_EHCI_HCD_SSB ++ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); ++#endif + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + usb_put_hcd(hcd); ++ ++#ifdef CONFIG_USB_EHCI_HCD_SSB ++ /* ++ * Also detach ehci function ++ */ ++ if (dev->id.coreid == SSB_DEV_USB20_HOST) ++ ssb_ehci_detach(dev, ohcidev->ehci_hcd); ++#endif + ssb_device_disable(dev, 0); + } + ++ + static int ssb_ohci_attach(struct ssb_device *dev) + { + struct ssb_ohci_device *ohcidev; +@@ -165,6 +180,14 @@ static int ssb_ohci_attach(struct ssb_de + + ssb_set_drvdata(dev, hcd); + ++#ifdef CONFIG_USB_EHCI_HCD_SSB ++ /* ++ * attach ehci function in this core ++ */ ++ if (dev->id.coreid == SSB_DEV_USB20_HOST) ++ err = ssb_ehci_attach(dev, &(ohcidev->ehci_hcd)); ++#endif ++ + return err; + + err_iounmap: diff --git a/target/linux/brcm47xx/patches-2.6.31/275-usb2-bcm5354-init.patch b/target/linux/brcm47xx/patches-2.6.31/275-usb2-bcm5354-init.patch new file mode 100644 index 0000000000..3d8327ebfd --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/275-usb2-bcm5354-init.patch @@ -0,0 +1,63 @@ +This patch significantly improves the reliability of high speed +usb writes on the bcm5354. It implements a work around for version 2 +of the usb20 core that was cribbed from the GPL sources for the +Asus wl500gpv2 and verified against the wl520gu sources. + +Reference: +GPL/WL-520gu-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c +GPL/WL-500gPV2-NewUI/src/linux/linux/arch/mips/brcm-boards/bcm947xx/pcibios.c + +Signed-off-by: Steve Brown <sbrown@cortland.com> + +--- + drivers/usb/host/ohci-ssb.c | 37 +++++++++++++++++++++++-------------- + 1 file changed, 23 insertions(+), 14 deletions(-) + +--- a/drivers/usb/host/ohci-ssb.c ++++ b/drivers/usb/host/ohci-ssb.c +@@ -141,22 +141,31 @@ static int ssb_ohci_attach(struct ssb_de + */ + ssb_device_enable(dev, 0); + ssb_write32(dev, 0x200, 0x7ff); ++ ++ /* Change Flush control reg */ ++ tmp = ssb_read32(dev, 0x400); ++ tmp &= ~8; ++ ssb_write32(dev, 0x400, tmp); ++ tmp = ssb_read32(dev, 0x400); ++ ++ /* Change Shim control reg */ ++ tmp = ssb_read32(dev, 0x304); ++ tmp &= ~0x100; ++ ssb_write32(dev, 0x304, tmp); ++ tmp = ssb_read32(dev, 0x304); ++ + udelay(1); +- if (dev->id.revision == 1) { // bug in rev 1 + +- /* Change Flush control reg */ +- tmp = ssb_read32(dev, 0x400); +- tmp &= ~8; +- ssb_write32(dev, 0x400, tmp); +- tmp = ssb_read32(dev, 0x400); +- printk("USB20H fcr: 0x%0x\n", tmp); +- +- /* Change Shim control reg */ +- tmp = ssb_read32(dev, 0x304); +- tmp &= ~0x100; +- ssb_write32(dev, 0x304, tmp); +- tmp = ssb_read32(dev, 0x304); +- printk("USB20H shim: 0x%0x\n", tmp); ++ /* Work around for 5354 failures */ ++ if ((dev->id.revision == 2) && (dev->bus->chip_id == 0x5354)) { ++ /* Change syn01 reg */ ++ tmp = 0x00fe00fe; ++ ssb_write32(dev, 0x894, tmp); ++ ++ /* Change syn03 reg */ ++ tmp = ssb_read32(dev, 0x89c); ++ tmp |= 0x1; ++ ssb_write32(dev, 0x89c, tmp); + } + } else + ssb_device_enable(dev, 0); diff --git a/target/linux/brcm47xx/patches-2.6.31/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-2.6.31/280-activate_ssb_support_in_usb.patch new file mode 100644 index 0000000000..aeb9d334c3 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/280-activate_ssb_support_in_usb.patch @@ -0,0 +1,16 @@ +This prevents the options from being delete with make kernel_oldconfig. +--- + drivers/ssb/Kconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -126,6 +126,8 @@ config SSB_DRIVER_MIPS + config SSB_EMBEDDED + bool + depends on SSB_DRIVER_MIPS ++ select USB_EHCI_HCD_SSB if USB_EHCI_HCD ++ select USB_OHCI_HCD_SSB if USB_OHCI_HCD + default y + + config SSB_DRIVER_EXTIF diff --git a/target/linux/brcm47xx/patches-2.6.31/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.31/300-fork_cacheflush.patch new file mode 100644 index 0000000000..686fb1b945 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/300-fork_cacheflush.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/include/asm/cacheflush.h ++++ b/arch/mips/include/asm/cacheflush.h +@@ -32,7 +32,7 @@ + extern void (*flush_cache_all)(void); + extern void (*__flush_cache_all)(void); + extern void (*flush_cache_mm)(struct mm_struct *mm); +-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) ++#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + extern void (*flush_cache_range)(struct vm_area_struct *vma, + unsigned long start, unsigned long end); + extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-2.6.31/301-kmod-fuse-dcache-bug-r4k.patch b/target/linux/brcm47xx/patches-2.6.31/301-kmod-fuse-dcache-bug-r4k.patch new file mode 100644 index 0000000000..e960dbaccf --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/301-kmod-fuse-dcache-bug-r4k.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -373,7 +373,7 @@ static inline void local_r4k___flush_cac + } + } + +-static void r4k___flush_cache_all(void) ++void r4k___flush_cache_all(void) + { + r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1); + } +@@ -537,7 +537,7 @@ static inline void local_r4k_flush_cache + } + } + +-static void r4k_flush_cache_page(struct vm_area_struct *vma, ++void r4k_flush_cache_page(struct vm_area_struct *vma, + unsigned long addr, unsigned long pfn) + { + struct flush_cache_page_args args; +@@ -1456,3 +1456,10 @@ void __cpuinit r4k_cache_init(void) + coherency_setup(); + #endif + } ++ ++// fuse package DCACHE BUG patch exports ++void (*fuse_flush_cache_all)(void) = r4k___flush_cache_all; ++void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page, ++ unsigned long pfn) = r4k_flush_cache_page; ++EXPORT_SYMBOL(fuse_flush_cache_page); ++EXPORT_SYMBOL(fuse_flush_cache_all); diff --git a/target/linux/brcm47xx/patches-2.6.31/302-kmod-fuse-dcache-bug-fuse.patch b/target/linux/brcm47xx/patches-2.6.31/302-kmod-fuse-dcache-bug-fuse.patch new file mode 100644 index 0000000000..ba4b799ecd --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/302-kmod-fuse-dcache-bug-fuse.patch @@ -0,0 +1,82 @@ +--- a/fs/fuse/dev.c ++++ b/fs/fuse/dev.c +@@ -533,6 +533,11 @@ static void fuse_copy_finish(struct fuse + } + } + ++#ifdef DCACHE_BUG ++extern void (*fuse_flush_cache_all)(void); ++extern void (*fuse_flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); ++#endif ++ + /* + * Get another pagefull of userspace buffer, and map it to kernel + * address space, and lock request +@@ -541,6 +546,9 @@ static int fuse_copy_fill(struct fuse_co + { + unsigned long offset; + int err; ++#ifdef DCACHE_BUG ++ struct vm_area_struct *vma; ++#endif + + unlock_request(cs->fc, cs->req); + fuse_copy_finish(cs); +@@ -552,14 +560,22 @@ static int fuse_copy_fill(struct fuse_co + cs->nr_segs--; + } + down_read(¤t->mm->mmap_sem); ++#ifndef DCACHE_BUG + err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0, + &cs->pg, NULL); ++#else ++ err = get_user_pages(current, current->mm, cs->addr, 1, cs->write, 0, ++ &cs->pg, &vma); ++#endif + up_read(¤t->mm->mmap_sem); + if (err < 0) + return err; + BUG_ON(err != 1); + offset = cs->addr % PAGE_SIZE; + cs->mapaddr = kmap_atomic(cs->pg, KM_USER0); ++#ifdef DCACHE_BUG ++ fuse_flush_cache_page(vma, cs->addr, page_to_pfn(cs->pg)); ++#endif + cs->buf = cs->mapaddr + offset; + cs->len = min(PAGE_SIZE - offset, cs->seglen); + cs->seglen -= cs->len; +@@ -573,6 +589,11 @@ static int fuse_copy_do(struct fuse_copy + { + unsigned ncpy = min(*size, cs->len); + if (val) { ++#ifdef DCACHE_BUG ++ // patch from mailing list, it is very important, otherwise, ++ // can't mount, or ls mount point will hang ++ fuse_flush_cache_all(); ++#endif + if (cs->write) + memcpy(cs->buf, *val, ncpy); + else +--- a/fs/fuse/fuse_i.h ++++ b/fs/fuse/fuse_i.h +@@ -8,6 +8,7 @@ + + #ifndef _FS_FUSE_I_H + #define _FS_FUSE_I_H ++#define DCACHE_BUG + + #include <linux/fuse.h> + #include <linux/fs.h> +--- a/fs/fuse/inode.c ++++ b/fs/fuse/inode.c +@@ -1130,6 +1130,10 @@ static int __init fuse_init(void) + printk(KERN_INFO "fuse init (API version %i.%i)\n", + FUSE_KERNEL_VERSION, FUSE_KERNEL_MINOR_VERSION); + ++#ifdef DCACHE_BUG ++printk("fuse init: DCACHE_BUG enabled\n"); ++#endif ++ + INIT_LIST_HEAD(&fuse_conn_list); + res = fuse_fs_init(); + if (res) diff --git a/target/linux/brcm47xx/patches-2.6.31/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.31/310-no_highpage.patch new file mode 100644 index 0000000000..292060deab --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/310-no_highpage.patch @@ -0,0 +1,66 @@ +--- a/arch/mips/include/asm/page.h ++++ b/arch/mips/include/asm/page.h +@@ -42,6 +42,7 @@ + #ifndef __ASSEMBLY__ + + #include <linux/pfn.h> ++#include <asm/cpu-features.h> + #include <asm/io.h> + + extern void build_clear_page(void); +@@ -77,13 +78,16 @@ static inline void clear_user_page(void + flush_data_cache_page((unsigned long)addr); + } + +-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, +- struct page *to); +-struct vm_area_struct; +-extern void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma); ++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, ++ struct page *to) ++{ ++ extern void (*flush_data_cache_page)(unsigned long addr); + +-#define __HAVE_ARCH_COPY_USER_HIGHPAGE ++ copy_page(vto, vfrom); ++ if (!cpu_has_ic_fills_f_dc || ++ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) ++ flush_data_cache_page((unsigned long)vto); ++} + + /* + * These are used to make use of C type-checking.. +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -199,30 +199,6 @@ void kunmap_coherent(void) + preempt_check_resched(); + } + +-void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma) +-{ +- void *vfrom, *vto; +- +- vto = kmap_atomic(to, KM_USER1); +- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && +- page_mapped(from) && !Page_dcache_dirty(from)) { +- vfrom = kmap_coherent(from, vaddr); +- copy_page(vto, vfrom); +- kunmap_coherent(); +- } else { +- vfrom = kmap_atomic(from, KM_USER0); +- copy_page(vto, vfrom); +- kunmap_atomic(vfrom, KM_USER0); +- } +- if ((!cpu_has_ic_fills_f_dc) || +- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) +- flush_data_cache_page((unsigned long)vto); +- kunmap_atomic(vto, KM_USER1); +- /* Make sure this page is cleared on other CPU's too before using it */ +- smp_wmb(); +-} +- + void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) diff --git a/target/linux/brcm47xx/patches-2.6.31/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-2.6.31/400-arch-bcm47xx.patch new file mode 100644 index 0000000000..1c15a35e99 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/400-arch-bcm47xx.patch @@ -0,0 +1,319 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -73,6 +73,7 @@ config BCM47XX + select SSB_DRIVER_MIPS + select SSB_DRIVER_EXTIF + select SSB_EMBEDDED ++ select SSB_B43_PCI_BRIDGE if PCI + select SSB_PCICORE_HOSTMODE if PCI + select GENERIC_GPIO + select SYS_HAS_EARLY_PRINTK +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -3,4 +3,4 @@ + # under Linux. + # + +-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o ++obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o +--- a/arch/mips/bcm47xx/irq.c ++++ b/arch/mips/bcm47xx/irq.c +@@ -1,5 +1,6 @@ + /* + * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> ++ * Copyright (C) 2008 Michael Buesch <mb@bu3sch.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the +@@ -23,10 +24,19 @@ + */ + + #include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/init.h> + #include <linux/interrupt.h> + #include <linux/irq.h> ++#include <linux/pci.h> ++#include <linux/ssb/ssb.h> ++ + #include <asm/irq_cpu.h> + ++ ++extern struct ssb_bus ssb_bcm47xx; ++ ++ + void plat_irq_dispatch(void) + { + u32 cause; +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c +@@ -24,10 +24,10 @@ + #include <asm/io.h> + #include <asm/uaccess.h> + +-#include <nvram.h> ++#include "include/nvram.h" + + #define MB * 1048576 +-extern struct ssb_bus ssb; ++extern struct ssb_bus ssb_bcm47xx; + + static char nvram_buf[NVRAM_SPACE]; + static int cfe_env; +@@ -36,7 +36,7 @@ extern char *cfe_env_get(char *nv_buf, c + /* Probe for NVRAM header */ + static void __init early_nvram_init(void) + { +- struct ssb_mipscore *mcore = &ssb.mipscore; ++ struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; + struct nvram_header *header; + int i; + u32 base, lim, off; +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -2,7 +2,7 @@ + * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> + * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> +- * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de> ++ * Copyright (C) 2006-2008 Michael Buesch <mb@bu3sch.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the +@@ -25,18 +25,28 @@ + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + ++#include <linux/init.h> + #include <linux/types.h> + #include <linux/ssb/ssb.h> + #include <linux/ssb/ssb_embedded.h> ++#include <linux/tty.h> ++#include <linux/serial.h> ++#include <linux/serial_core.h> ++#include <linux/serial_reg.h> ++#include <linux/serial_8250.h> + #include <asm/bootinfo.h> + #include <asm/reboot.h> + #include <asm/time.h> +-#include <bcm47xx.h> + #include <asm/fw/cfe/cfe_api.h> ++#include <linux/pm.h> ++ ++#include "include/nvram.h" + + struct ssb_bus ssb_bcm47xx; + EXPORT_SYMBOL(ssb_bcm47xx); + ++extern void bcm47xx_pci_init(void); ++ + static void bcm47xx_machine_restart(char *command) + { + printk(KERN_ALERT "Please stand by while rebooting the system...\n"); +@@ -56,7 +66,7 @@ static void bcm47xx_machine_halt(void) + cpu_relax(); + } + +-static void str2eaddr(char *str, char *dest) ++static void e_aton(char *str, char *dest) + { + int i = 0; + +@@ -73,52 +83,142 @@ static void str2eaddr(char *str, char *d + } + } + +-static int bcm47xx_get_invariants(struct ssb_bus *bus, +- struct ssb_init_invariants *iv) ++static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) + { +- char buf[100]; ++ char *s; + +- /* Fill boardinfo structure */ +- memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); ++ memset(sprom, 0xFF, sizeof(struct ssb_sprom)); + +- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0) +- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); +- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0) +- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); +- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0) +- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); +- +- /* Fill sprom structure */ +- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); +- iv->sprom.revision = 3; +- +- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0) +- str2eaddr(buf, iv->sprom.et0mac); +- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0) +- str2eaddr(buf, iv->sprom.et1mac); +- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) +- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10); +- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) +- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10); +- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0) +- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); +- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0) +- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); ++ sprom->revision = 1; ++ if ((s = nvram_get("il0macaddr"))) ++ e_aton(s, sprom->il0mac); ++ if ((s = nvram_get("et0macaddr"))) ++ e_aton(s, sprom->et0mac); ++ if ((s = nvram_get("et1macaddr"))) ++ e_aton(s, sprom->et1mac); ++ if ((s = nvram_get("et0phyaddr"))) ++ sprom->et0phyaddr = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("et1phyaddr"))) ++ sprom->et1phyaddr = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("et0mdcport"))) ++ sprom->et0mdcport = !!simple_strtoul(s, NULL, 10); ++ if ((s = nvram_get("et1mdcport"))) ++ sprom->et1mdcport = !!simple_strtoul(s, NULL, 10); ++ if ((s = nvram_get("pa0b0"))) ++ sprom->pa0b0 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa0b1"))) ++ sprom->pa0b1 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa0b2"))) ++ sprom->pa0b2 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa1b0"))) ++ sprom->pa1b0 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa1b1"))) ++ sprom->pa1b1 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa1b2"))) ++ sprom->pa1b2 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("wl0gpio0"))) ++ sprom->gpio0 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("wl0gpio1"))) ++ sprom->gpio1 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("wl0gpio2"))) ++ sprom->gpio2 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("wl0gpio3"))) ++ sprom->gpio3 = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa0maxpwr"))) ++ sprom->maxpwr_bg = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa1maxpwr"))) ++ sprom->maxpwr_a = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa0itssit"))) ++ sprom->itssi_bg = simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("pa1itssit"))) ++ sprom->itssi_a = simple_strtoul(s, NULL, 0); ++ sprom->boardflags_lo = 0; ++ if ((s = nvram_get("boardflags"))) ++ sprom->boardflags_lo = simple_strtoul(s, NULL, 0); ++ sprom->boardflags_hi = 0; ++ if ((s = nvram_get("boardflags2"))) ++ sprom->boardflags_hi = simple_strtoul(s, NULL, 0); ++} ++ ++static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) ++{ ++ char *s; ++ ++ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; ++ if ((s = nvram_get("boardtype"))) ++ iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0); ++ if ((s = nvram_get("boardrev"))) ++ iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0); ++ ++ bcm47xx_fill_sprom(&iv->sprom); ++ ++ if ((s = nvram_get("cardbus"))) ++ iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10); + + return 0; + } + + void __init plat_mem_setup(void) + { +- int err; ++ int i, err; ++ char *s; ++ struct ssb_mipscore *mcore; ++ ++ err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); ++ if (err) { ++ const char *msg = "Failed to initialize SSB bus (err %d)\n"; ++ printk(msg, err); /* Make sure the message gets out of the box. */ ++ panic(msg, err); ++ } ++ mcore = &ssb_bcm47xx.mipscore; + +- err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, +- bcm47xx_get_invariants); +- if (err) +- panic("Failed to initialize SSB bus (err %d)\n", err); ++ s = nvram_get("kernel_args"); ++ if (s && !strncmp(s, "console=ttyS1", 13)) { ++ struct ssb_serial_port port; ++ ++ printk("Swapping serial ports!\n"); ++ /* swap serial ports */ ++ memcpy(&port, &mcore->serial_ports[0], sizeof(port)); ++ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port)); ++ memcpy(&mcore->serial_ports[1], &port, sizeof(port)); ++ } ++ ++ for (i = 0; i < mcore->nr_serial_ports; i++) { ++ struct ssb_serial_port *port = &(mcore->serial_ports[i]); ++ struct uart_port s; ++ ++ memset(&s, 0, sizeof(s)); ++ s.line = i; ++ s.mapbase = (unsigned int) port->regs; ++ s.membase = port->regs; ++ s.irq = port->irq + 2; ++ s.uartclk = port->baud_base; ++ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = port->reg_shift; ++ ++ early_serial_setup(&s); ++ } ++ printk("Serial init done.\n"); + + _machine_restart = bcm47xx_machine_restart; + _machine_halt = bcm47xx_machine_halt; + pm_power_off = bcm47xx_machine_halt; + } + ++static int __init bcm47xx_register_gpiodev(void) ++{ ++ static struct resource res = { ++ .start = 0xFFFFFFFF, ++ }; ++ struct platform_device *pdev; ++ ++ pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); ++ if (!pdev) { ++ printk(KERN_ERR "bcm47xx: GPIODEV init failed\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++device_initcall(bcm47xx_register_gpiodev); +--- a/arch/mips/bcm47xx/time.c ++++ b/arch/mips/bcm47xx/time.c +@@ -22,11 +22,17 @@ + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +- + #include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/serial_reg.h> ++#include <linux/interrupt.h> + #include <linux/ssb/ssb.h> ++#include <asm/addrspace.h> ++#include <asm/io.h> + #include <asm/time.h> +-#include <bcm47xx.h> ++ ++extern struct ssb_bus ssb_bcm47xx; + + void __init plat_time_init(void) + { diff --git a/target/linux/brcm47xx/patches-2.6.31/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.31/601-mips-remove-pci-collision-check.patch new file mode 100644 index 0000000000..7860ca0dd8 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/601-mips-remove-pci-collision-check.patch @@ -0,0 +1,18 @@ +--- a/arch/mips/pci/pci.c ++++ b/arch/mips/pci/pci.c +@@ -185,12 +185,10 @@ static int pcibios_enable_resources(stru + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; +- if (!r->start && r->end) { +- printk(KERN_ERR "PCI: Device %s not available " +- "because of resource collisions\n", ++ if (!r->start && r->end) ++ printk(KERN_WARNING "PCI: Device %s resource" ++ "collisions detected. Ignoring...\n", + pci_name(dev)); +- return -EINVAL; +- } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) diff --git a/target/linux/brcm47xx/patches-2.6.31/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.31/700-ssb-gigabit-ethernet-driver.patch new file mode 100644 index 0000000000..4a47e63a79 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/700-ssb-gigabit-ethernet-driver.patch @@ -0,0 +1,336 @@ +--- a/drivers/net/tg3.c ++++ b/drivers/net/tg3.c +@@ -41,6 +41,7 @@ + #include <linux/prefetch.h> + #include <linux/dma-mapping.h> + #include <linux/firmware.h> ++#include <linux/ssb/ssb_driver_gige.h> + + #include <net/checksum.h> + #include <net/ip.h> +@@ -446,8 +447,9 @@ static void _tw32_flush(struct tg3 *tp, + static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) + { + tp->write32_mbox(tp, off, val); +- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && +- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)) ++ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) || ++ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && ++ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))) + tp->read32_mbox(tp, off); + } + +@@ -457,7 +459,7 @@ static void tg3_write32_tx_mbox(struct t + writel(val, mbox); + if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) + writel(val, mbox); +- if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ++ if ((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES)) + readl(mbox); + } + +@@ -729,7 +731,7 @@ static void tg3_switch_clocks(struct tg3 + + #define PHY_BUSY_LOOPS 5000 + +-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) ++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val) + { + u32 frame_val; + unsigned int loops; +@@ -743,7 +745,7 @@ static int tg3_readphy(struct tg3 *tp, i + + *val = 0x0; + +- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & ++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & + MI_COM_PHY_ADDR_MASK); + frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & + MI_COM_REG_ADDR_MASK); +@@ -778,7 +780,12 @@ static int tg3_readphy(struct tg3 *tp, i + return ret; + } + +-static int tg3_writephy(struct tg3 *tp, int reg, u32 val) ++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) ++{ ++ return __tg3_readphy(tp, PHY_ADDR, reg, val); ++} ++ ++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val) + { + u32 frame_val; + unsigned int loops; +@@ -794,7 +801,7 @@ static int tg3_writephy(struct tg3 *tp, + udelay(80); + } + +- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & ++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & + MI_COM_PHY_ADDR_MASK); + frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & + MI_COM_REG_ADDR_MASK); +@@ -827,6 +834,11 @@ static int tg3_writephy(struct tg3 *tp, + return ret; + } + ++static int tg3_writephy(struct tg3 *tp, int reg, u32 val) ++{ ++ return __tg3_writephy(tp, PHY_ADDR, reg, val); ++} ++ + static int tg3_bmcr_reset(struct tg3 *tp) + { + u32 phy_control; +@@ -2263,6 +2275,9 @@ static int tg3_nvram_read(struct tg3 *tp + { + int ret; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) ++ return -ENODEV; ++ + if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) + return tg3_nvram_read_using_eeprom(tp, offset, val); + +@@ -2594,8 +2609,10 @@ static int tg3_set_power_state(struct tg + tg3_frob_aux_power(tp); + + /* Workaround for unstable PLL clock */ +- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || +- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) { ++ if ((tp->phy_id & PHY_ID_MASK != PHY_ID_BCM5750_2) && ++ /* !!! FIXME !!! */ ++ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || ++ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) { + u32 val = tr32(0x7d00); + + val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); +@@ -3087,6 +3104,14 @@ relink: + + tg3_phy_copper_begin(tp); + ++ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) { ++ current_link_up = 1; ++ current_speed = SPEED_1000; //FIXME ++ current_duplex = DUPLEX_FULL; ++ tp->link_config.active_speed = current_speed; ++ tp->link_config.active_duplex = current_duplex; ++ } ++ + tg3_readphy(tp, MII_BMSR, &tmp); + if (!tg3_readphy(tp, MII_BMSR, &tmp) && + (tmp & BMSR_LSTATUS)) +@@ -6000,6 +6025,11 @@ static int tg3_poll_fw(struct tg3 *tp) + int i; + u32 val; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* We don't use firmware. */ ++ return 0; ++ } ++ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + /* Wait up to 20ms for init done. */ + for (i = 0; i < 200; i++) { +@@ -6257,6 +6287,14 @@ static int tg3_chip_reset(struct tg3 *tp + tw32(0x5000, 0x400); + } + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* BCM4785: In order to avoid repercussions from using potentially ++ * defective internal ROM, stop the Rx RISC CPU, which is not ++ * required. */ ++ tg3_stop_fw(tp); ++ tg3_halt_cpu(tp, RX_CPU_BASE); ++ } ++ + tw32(GRC_MODE, tp->grc_mode); + + if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { +@@ -6409,9 +6447,12 @@ static int tg3_halt_cpu(struct tg3 *tp, + return -ENODEV; + } + +- /* Clear firmware's nvram arbitration. */ +- if (tp->tg3_flags & TG3_FLAG_NVRAM) +- tw32(NVRAM_SWARB, SWARB_REQ_CLR0); ++ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) { ++ /* Clear firmware's nvram arbitration. */ ++ if (tp->tg3_flags & TG3_FLAG_NVRAM) ++ tw32(NVRAM_SWARB, SWARB_REQ_CLR0); ++ } ++ + return 0; + } + +@@ -6474,6 +6515,11 @@ static int tg3_load_5701_a0_firmware_fix + const __be32 *fw_data; + int err, i; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* We don't use firmware. */ ++ return 0; ++ } ++ + fw_data = (void *)tp->fw->data; + + /* Firmware blob starts with version numbers, followed by +@@ -6533,6 +6579,11 @@ static int tg3_load_tso_firmware(struct + unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size; + int err, i; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* We don't use firmware. */ ++ return 0; ++ } ++ + if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) + return 0; + +@@ -7444,6 +7495,11 @@ static void tg3_timer(unsigned long __op + + spin_lock(&tp->lock); + ++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { ++ /* BCM4785: Flush posted writes from GbE to host memory. */ ++ tr32(HOSTCC_MODE); ++ } ++ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + /* All of this garbage is because when using non-tagged + * IRQ status the mailbox/status_block protocol the chip +@@ -9217,6 +9273,11 @@ static int tg3_test_nvram(struct tg3 *tp + if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) + return 0; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* We don't have NVRAM. */ ++ return 0; ++ } ++ + if (tg3_nvram_read(tp, 0, &magic) != 0) + return -EIO; + +@@ -10010,7 +10071,7 @@ static int tg3_ioctl(struct net_device * + return -EAGAIN; + + spin_lock_bh(&tp->lock); +- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); ++ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); + spin_unlock_bh(&tp->lock); + + data->val_out = mii_regval; +@@ -10029,7 +10090,7 @@ static int tg3_ioctl(struct net_device * + return -EAGAIN; + + spin_lock_bh(&tp->lock); +- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); ++ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); + spin_unlock_bh(&tp->lock); + + return err; +@@ -10619,6 +10680,12 @@ static void __devinit tg3_get_57780_nvra + /* Chips other than 5700/5701 use the NVRAM for fetching info. */ + static void __devinit tg3_nvram_init(struct tg3 *tp) + { ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { ++ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ ++ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED); ++ return; ++ } ++ + tw32_f(GRC_EEPROM_ADDR, + (EEPROM_ADDR_FSM_RESET | + (EEPROM_DEFAULT_CLOCK_PERIOD << +@@ -10877,6 +10944,9 @@ static int tg3_nvram_write_block(struct + { + int ret; + ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) ++ return -ENODEV; ++ + if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { + tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & + ~GRC_LCLCTRL_GPIO_OUTPUT1); +@@ -12100,7 +12170,6 @@ static int __devinit tg3_get_invariants( + tp->write32 = tg3_write_flush_reg32; + } + +- + if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) || + (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) { + tp->write32_tx_mbox = tg3_write32_tx_mbox; +@@ -12136,6 +12205,11 @@ static int __devinit tg3_get_invariants( + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) + tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; + ++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { ++ tp->write32_tx_mbox = tg3_write_flush_reg32; ++ tp->write32_rx_mbox = tg3_write_flush_reg32; ++ } ++ + /* Get eeprom hw config before calling tg3_set_power_state(). + * In particular, the TG3_FLG2_IS_NIC flag must be + * determined before calling tg3_set_power_state() so that +@@ -12513,6 +12587,10 @@ static int __devinit tg3_get_device_addr + } + + if (!is_valid_ether_addr(&dev->dev_addr[0])) { ++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) ++ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); ++ } ++ if (!is_valid_ether_addr(&dev->dev_addr[0])) { + #ifdef CONFIG_SPARC + if (!tg3_get_default_macaddr_sparc(tp)) + return 0; +@@ -13004,6 +13082,7 @@ static char * __devinit tg3_phy_string(s + case PHY_ID_BCM5704: return "5704"; + case PHY_ID_BCM5705: return "5705"; + case PHY_ID_BCM5750: return "5750"; ++ case PHY_ID_BCM5750_2: return "5750-2"; + case PHY_ID_BCM5752: return "5752"; + case PHY_ID_BCM5714: return "5714"; + case PHY_ID_BCM5780: return "5780"; +@@ -13214,6 +13293,13 @@ static int __devinit tg3_init_one(struct + tp->msg_enable = tg3_debug; + else + tp->msg_enable = TG3_DEF_MSG_ENABLE; ++ if (pdev_is_ssb_gige_core(pdev)) { ++ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE; ++ if (ssb_gige_must_flush_posted_writes(pdev)) ++ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES; ++ if (ssb_gige_have_roboswitch(pdev)) ++ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH; ++ } + + /* The word/byte swap controls here control register access byte + * swapping. DMA data byte swapping is controlled in the GRC_MODE +--- a/drivers/net/tg3.h ++++ b/drivers/net/tg3.h +@@ -1853,6 +1853,9 @@ + #define NIC_SRAM_RGMII_STD_IBND_DISABLE 0x00000004 + #define NIC_SRAM_RGMII_EXT_IBND_RX_EN 0x00000008 + #define NIC_SRAM_RGMII_EXT_IBND_TX_EN 0x00000010 ++#define TG3_FLG3_IS_SSB_CORE 0x00000800 ++#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00001000 ++#define TG3_FLG3_ROBOSWITCH 0x00002000 + + #define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000 + +@@ -2701,6 +2704,7 @@ struct tg3 { + #define PHY_ID_BCM5714 0x60008340 + #define PHY_ID_BCM5780 0x60008350 + #define PHY_ID_BCM5755 0xbc050cc0 ++#define PHY_ID_BCM5750_2 0xbc050cd0 + #define PHY_ID_BCM5787 0xbc050ce0 + #define PHY_ID_BCM5756 0xbc050ed0 + #define PHY_ID_BCM5784 0xbc050fa0 +@@ -2745,7 +2749,7 @@ struct tg3 { + (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \ + (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \ + (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \ +- (X) == PHY_ID_BCM8002) ++ (X) == PHY_ID_BCM8002 || (X) == PHY_ID_BCM5750_2) + + struct tg3_hw_stats *hw_stats; + dma_addr_t stats_mapping; diff --git a/target/linux/brcm47xx/patches-2.6.31/800-fix_cfe_detection.patch b/target/linux/brcm47xx/patches-2.6.31/800-fix_cfe_detection.patch new file mode 100644 index 0000000000..6cba540530 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/800-fix_cfe_detection.patch @@ -0,0 +1,108 @@ +--- a/arch/mips/bcm47xx/prom.c ++++ b/arch/mips/bcm47xx/prom.c +@@ -32,6 +32,7 @@ + #include <asm/fw/cfe/cfe_error.h> + + static int cfe_cons_handle; ++static void (* __prom_putchar)(char c); + + const char *get_system_type(void) + { +@@ -40,65 +41,40 @@ const char *get_system_type(void) + + void prom_putchar(char c) + { ++ if (__prom_putchar) ++ __prom_putchar(c); ++} ++ ++void prom_putchar_cfe(char c) ++{ + while (cfe_write(cfe_cons_handle, &c, 1) == 0) + ; + } + +-static __init void prom_init_cfe(void) ++static __init int prom_init_cfe(void) + { + uint32_t cfe_ept; + uint32_t cfe_handle; + uint32_t cfe_eptseal; +- int argc = fw_arg0; +- char **envp = (char **) fw_arg2; +- int *prom_vec = (int *) fw_arg3; +- +- /* +- * Check if a loader was used; if NOT, the 4 arguments are +- * what CFE gives us (handle, 0, EPT and EPTSEAL) +- */ +- if (argc < 0) { +- cfe_handle = (uint32_t)argc; +- cfe_ept = (uint32_t)envp; +- cfe_eptseal = (uint32_t)prom_vec; +- } else { +- if ((int)prom_vec < 0) { +- /* +- * Old loader; all it gives us is the handle, +- * so use the "known" entrypoint and assume +- * the seal. +- */ +- cfe_handle = (uint32_t)prom_vec; +- cfe_ept = 0xBFC00500; +- cfe_eptseal = CFE_EPTSEAL; +- } else { +- /* +- * Newer loaders bundle the handle/ept/eptseal +- * Note: prom_vec is in the loader's useg +- * which is still alive in the TLB. +- */ +- cfe_handle = prom_vec[0]; +- cfe_ept = prom_vec[2]; +- cfe_eptseal = prom_vec[3]; +- } +- } + +- if (cfe_eptseal != CFE_EPTSEAL) { +- /* too early for panic to do any good */ +- printk(KERN_ERR "CFE's entrypoint seal doesn't match."); +- while (1) ; +- } ++ cfe_eptseal = (uint32_t) fw_arg3; ++ cfe_handle = (uint32_t) fw_arg0; ++ cfe_ept = (uint32_t) fw_arg2; ++ ++ if (cfe_eptseal != CFE_EPTSEAL) ++ return -1; + + cfe_init(cfe_handle, cfe_ept); ++ return 0; + } + +-static __init void prom_init_console(void) ++static __init void prom_init_console_cfe(void) + { + /* Initialize CFE console */ + cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); + } + +-static __init void prom_init_cmdline(void) ++static __init void prom_init_cmdline_cfe(void) + { + char buf[CL_SIZE]; + +@@ -146,9 +122,12 @@ static __init void prom_init_mem(void) + + void __init prom_init(void) + { +- prom_init_cfe(); +- prom_init_console(); +- prom_init_cmdline(); ++ if (prom_init_cfe() == 0) { ++ //prom_init_console_cfe(); ++ //prom_init_cmdline_cfe(); ++ __prom_putchar = prom_putchar_cfe; ++ } ++ + prom_init_mem(); + } + diff --git a/target/linux/brcm47xx/patches-2.6.31/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-2.6.31/812-disable_wgt634u_crap.patch new file mode 100644 index 0000000000..eb212f3d15 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/812-disable_wgt634u_crap.patch @@ -0,0 +1,178 @@ +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -3,4 +3,4 @@ + # under Linux. + # + +-obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o ++obj-y := cfe_env.o gpio.o irq.o nvram.o prom.o serial.o setup.o time.o +--- a/arch/mips/bcm47xx/wgt634u.c ++++ /dev/null +@@ -1,167 +0,0 @@ +-/* +- * This file is subject to the terms and conditions of the GNU General Public +- * License. See the file "COPYING" in the main directory of this archive +- * for more details. +- * +- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net> +- */ +- +-#include <linux/platform_device.h> +-#include <linux/module.h> +-#include <linux/leds.h> +-#include <linux/mtd/physmap.h> +-#include <linux/ssb/ssb.h> +-#include <linux/interrupt.h> +-#include <linux/reboot.h> +-#include <linux/gpio.h> +-#include <asm/mach-bcm47xx/bcm47xx.h> +- +-/* GPIO definitions for the WGT634U */ +-#define WGT634U_GPIO_LED 3 +-#define WGT634U_GPIO_RESET 2 +-#define WGT634U_GPIO_TP1 7 +-#define WGT634U_GPIO_TP2 6 +-#define WGT634U_GPIO_TP3 5 +-#define WGT634U_GPIO_TP4 4 +-#define WGT634U_GPIO_TP5 1 +- +-static struct gpio_led wgt634u_leds[] = { +- { +- .name = "power", +- .gpio = WGT634U_GPIO_LED, +- .active_low = 1, +- .default_trigger = "heartbeat", +- }, +-}; +- +-static struct gpio_led_platform_data wgt634u_led_data = { +- .num_leds = ARRAY_SIZE(wgt634u_leds), +- .leds = wgt634u_leds, +-}; +- +-static struct platform_device wgt634u_gpio_leds = { +- .name = "leds-gpio", +- .id = -1, +- .dev = { +- .platform_data = &wgt634u_led_data, +- } +-}; +- +- +-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U +- firmware. */ +-static struct mtd_partition wgt634u_partitions[] = { +- { +- .name = "cfe", +- .offset = 0, +- .size = 0x60000, /* 384k */ +- .mask_flags = MTD_WRITEABLE /* force read-only */ +- }, +- { +- .name = "config", +- .offset = 0x60000, +- .size = 0x20000 /* 128k */ +- }, +- { +- .name = "linux", +- .offset = 0x80000, +- .size = 0x140000 /* 1280k */ +- }, +- { +- .name = "jffs", +- .offset = 0x1c0000, +- .size = 0x620000 /* 6272k */ +- }, +- { +- .name = "nvram", +- .offset = 0x7e0000, +- .size = 0x20000 /* 128k */ +- }, +-}; +- +-static struct physmap_flash_data wgt634u_flash_data = { +- .parts = wgt634u_partitions, +- .nr_parts = ARRAY_SIZE(wgt634u_partitions) +-}; +- +-static struct resource wgt634u_flash_resource = { +- .flags = IORESOURCE_MEM, +-}; +- +-static struct platform_device wgt634u_flash = { +- .name = "physmap-flash", +- .id = 0, +- .dev = { .platform_data = &wgt634u_flash_data, }, +- .resource = &wgt634u_flash_resource, +- .num_resources = 1, +-}; +- +-/* Platform devices */ +-static struct platform_device *wgt634u_devices[] __initdata = { +- &wgt634u_flash, +- &wgt634u_gpio_leds, +-}; +- +-static irqreturn_t gpio_interrupt(int irq, void *ignored) +-{ +- int state; +- +- /* Interrupts are shared, check if the current one is +- a GPIO interrupt. */ +- if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco, +- SSB_CHIPCO_IRQ_GPIO)) +- return IRQ_NONE; +- +- state = gpio_get_value(WGT634U_GPIO_RESET); +- +- /* Interrupt are level triggered, revert the interrupt polarity +- to clear the interrupt. */ +- gpio_polarity(WGT634U_GPIO_RESET, state); +- +- if (!state) { +- printk(KERN_INFO "Reset button pressed"); +- ctrl_alt_del(); +- } +- +- return IRQ_HANDLED; +-} +- +-static int __init wgt634u_init(void) +-{ +- /* There is no easy way to detect that we are running on a WGT634U +- * machine. Use the MAC address as an heuristic. Netgear Inc. has +- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. +- */ +- +- u8 *et0mac = ssb_bcm47xx.sprom.et0mac; +- +- if (et0mac[0] == 0x00 && +- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) || +- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) { +- struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; +- +- printk(KERN_INFO "WGT634U machine detected.\n"); +- +- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), +- gpio_interrupt, IRQF_SHARED, +- "WGT634U GPIO", &ssb_bcm47xx.chipco)) { +- gpio_direction_input(WGT634U_GPIO_RESET); +- gpio_intmask(WGT634U_GPIO_RESET, 1); +- ssb_chipco_irq_mask(&ssb_bcm47xx.chipco, +- SSB_CHIPCO_IRQ_GPIO, +- SSB_CHIPCO_IRQ_GPIO); +- } +- +- wgt634u_flash_data.width = mcore->flash_buswidth; +- wgt634u_flash_resource.start = mcore->flash_window; +- wgt634u_flash_resource.end = mcore->flash_window +- + mcore->flash_window_size +- - 1; +- return platform_add_devices(wgt634u_devices, +- ARRAY_SIZE(wgt634u_devices)); +- } else +- return -ENODEV; +-} +- +-module_init(wgt634u_init); +- diff --git a/target/linux/brcm47xx/patches-2.6.31/813-use_netdev_alloc_skb.patch b/target/linux/brcm47xx/patches-2.6.31/813-use_netdev_alloc_skb.patch new file mode 100644 index 0000000000..c431e40967 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/813-use_netdev_alloc_skb.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/b44.c ++++ b/drivers/net/b44.c +@@ -815,7 +815,7 @@ static int b44_rx(struct b44 *bp, int bu + struct sk_buff *copy_skb; + + b44_recycle_rx(bp, cons, bp->rx_prod); +- copy_skb = dev_alloc_skb(len + 2); ++ copy_skb = netdev_alloc_skb(bp->dev, len + 2); + if (copy_skb == NULL) + goto drop_it_no_recycle; + diff --git a/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch b/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch new file mode 100644 index 0000000000..3d2b2a8df6 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/815-watchdog.patch @@ -0,0 +1,326 @@ +This add watchdog driver for broadcom 47xx device. +It uses the ssb subsytem to access embeded watchdog device. + +Because the watchdog timeout is very short (about 2s), a soft timer is used +to increase the watchdog period. + +Note : A patch for exporting the ssb_watchdog_timer_set will +be submitted on next linux-mips merge. Without this patch it can't +be build as a module. + +Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs> +Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -764,6 +764,12 @@ config TXX9_WDT + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config BCM47XX_WDT ++ tristate "Broadcom BCM47xx Watchdog Timer" ++ depends on BCM47XX ++ help ++ Hardware driver for the Broadcom BCM47xx Watchog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o + + # PARISC Architecture + +--- /dev/null ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -0,0 +1,286 @@ ++/* ++ * Watchdog driver for Broadcom BCM47XX ++ * ++ * Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs> ++ * Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include <linux/bitops.h> ++#include <linux/errno.h> ++#include <linux/fs.h> ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/miscdevice.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/reboot.h> ++#include <linux/types.h> ++#include <linux/uaccess.h> ++#include <linux/watchdog.h> ++#include <linux/timer.h> ++#include <linux/jiffies.h> ++#include <linux/ssb/ssb_embedded.h> ++#include <asm/mach-bcm47xx/bcm47xx.h> ++ ++#define DRV_NAME "bcm47xx_wdt" ++ ++#define WDT_DEFAULT_TIME 30 /* seconds */ ++#define WDT_MAX_TIME 256 /* seconds */ ++ ++static int wdt_time = WDT_DEFAULT_TIME; ++static int nowayout = WATCHDOG_NOWAYOUT; ++ ++module_param(wdt_time, int, 0); ++MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" ++ __MODULE_STRING(WDT_DEFAULT_TIME) ")"); ++ ++#ifdef CONFIG_WATCHDOG_NOWAYOUT ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, ++ "Watchdog cannot be stopped once started (default=" ++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++#endif ++ ++static unsigned long bcm47xx_wdt_busy; ++static char expect_release; ++static struct timer_list wdt_timer; ++static atomic_t ticks; ++ ++static inline void bcm47xx_wdt_hw_start(void) ++{ ++ /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */ ++ ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff); ++} ++ ++static inline int bcm47xx_wdt_hw_stop(void) ++{ ++ return ssb_watchdog_timer_set(&ssb_bcm47xx, 0); ++} ++ ++static void bcm47xx_timer_tick(unsigned long unused) ++{ ++ if (!atomic_dec_and_test(&ticks)) { ++ bcm47xx_wdt_hw_start(); ++ mod_timer(&wdt_timer, jiffies + HZ); ++ } else { ++ printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n"); ++ } ++} ++ ++static inline void bcm47xx_wdt_pet(void) ++{ ++ atomic_set(&ticks, wdt_time); ++} ++ ++static void bcm47xx_wdt_start(void) ++{ ++ bcm47xx_wdt_pet(); ++ bcm47xx_timer_tick(0); ++} ++ ++static void bcm47xx_wdt_pause(void) ++{ ++ del_timer_sync(&wdt_timer); ++ bcm47xx_wdt_hw_stop(); ++} ++ ++static void bcm47xx_wdt_stop(void) ++{ ++ bcm47xx_wdt_pause(); ++} ++ ++static int bcm47xx_wdt_settimeout(int new_time) ++{ ++ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) ++ return -EINVAL; ++ ++ wdt_time = new_time; ++ return 0; ++} ++ ++static int bcm47xx_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(0, &bcm47xx_wdt_busy)) ++ return -EBUSY; ++ ++ bcm47xx_wdt_start(); ++ return nonseekable_open(inode, file); ++} ++ ++static int bcm47xx_wdt_release(struct inode *inode, struct file *file) ++{ ++ if (expect_release == 42) { ++ bcm47xx_wdt_stop(); ++ } else { ++ printk(KERN_CRIT DRV_NAME ++ ": Unexpected close, not stopping watchdog!\n"); ++ bcm47xx_wdt_start(); ++ } ++ ++ clear_bit(0, &bcm47xx_wdt_busy); ++ expect_release = 0; ++ return 0; ++} ++ ++static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ if (len) { ++ if (!nowayout) { ++ size_t i; ++ ++ expect_release = 0; ++ ++ for (i = 0; i != len; i++) { ++ char c; ++ if (get_user(c, data + i)) ++ return -EFAULT; ++ if (c == 'V') ++ expect_release = 42; ++ } ++ } ++ bcm47xx_wdt_pet(); ++ } ++ return len; ++} ++ ++static struct watchdog_info bcm47xx_wdt_info = { ++ .identity = DRV_NAME, ++ .options = WDIOF_SETTIMEOUT | ++ WDIOF_KEEPALIVEPING | ++ WDIOF_MAGICCLOSE, ++}; ++ ++static long bcm47xx_wdt_ioctl(struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ void __user *argp = (void __user *)arg; ++ int __user *p = argp; ++ int new_value, retval = -EINVAL;; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ return copy_to_user(argp, &bcm47xx_wdt_info, ++ sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0; ++ ++ case WDIOC_GETSTATUS: ++ case WDIOC_GETBOOTSTATUS: ++ return put_user(0, p); ++ ++ case WDIOC_SETOPTIONS: ++ if (get_user(new_value, p)) ++ return -EFAULT; ++ ++ if (new_value & WDIOS_DISABLECARD) { ++ bcm47xx_wdt_stop(); ++ retval = 0; ++ } ++ ++ if (new_value & WDIOS_ENABLECARD) { ++ bcm47xx_wdt_start(); ++ retval = 0; ++ } ++ ++ return retval; ++ ++ case WDIOC_KEEPALIVE: ++ bcm47xx_wdt_pet(); ++ return 0; ++ ++ case WDIOC_SETTIMEOUT: ++ if (get_user(new_value, p)) ++ return -EFAULT; ++ ++ if (bcm47xx_wdt_settimeout(new_value)) ++ return -EINVAL; ++ ++ bcm47xx_wdt_pet(); ++ ++ case WDIOC_GETTIMEOUT: ++ return put_user(wdt_time, p); ++ ++ default: ++ return -ENOTTY; ++ } ++} ++ ++static int bcm47xx_wdt_notify_sys(struct notifier_block *this, ++ unsigned long code, void *unused) ++{ ++ if (code == SYS_DOWN || code == SYS_HALT) ++ bcm47xx_wdt_stop(); ++ return NOTIFY_DONE; ++} ++ ++static const struct file_operations bcm47xx_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .unlocked_ioctl = bcm47xx_wdt_ioctl, ++ .open = bcm47xx_wdt_open, ++ .release = bcm47xx_wdt_release, ++ .write = bcm47xx_wdt_write, ++}; ++ ++static struct miscdevice bcm47xx_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &bcm47xx_wdt_fops, ++}; ++ ++static struct notifier_block bcm47xx_wdt_notifier = { ++ .notifier_call = bcm47xx_wdt_notify_sys, ++}; ++ ++static int __init bcm47xx_wdt_init(void) ++{ ++ int ret; ++ ++ if (bcm47xx_wdt_hw_stop() < 0) ++ return -ENODEV; ++ ++ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L); ++ ++ if (bcm47xx_wdt_settimeout(wdt_time)) { ++ bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME); ++ printk(KERN_INFO DRV_NAME ++ ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n", ++ wdt_time); ++ } ++ ++ ret = register_reboot_notifier(&bcm47xx_wdt_notifier); ++ if (ret) ++ return ret; ++ ++ ret = misc_register(&bcm47xx_wdt_miscdev); ++ if (ret) { ++ unregister_reboot_notifier(&bcm47xx_wdt_notifier); ++ return ret; ++ } ++ ++ printk(KERN_INFO "BCM47xx Watchdog Timer enabled (%d seconds%s)\n", ++ wdt_time, nowayout ? ", nowayout" : ""); ++ return 0; ++} ++ ++static void __exit bcm47xx_wdt_exit(void) ++{ ++ if (!nowayout) ++ bcm47xx_wdt_stop(); ++ ++ misc_deregister(&bcm47xx_wdt_miscdev); ++ ++ unregister_reboot_notifier(&bcm47xx_wdt_notifier); ++} ++ ++module_init(bcm47xx_wdt_init); ++module_exit(bcm47xx_wdt_exit); ++ ++MODULE_AUTHOR("Aleksandar Radovanovic"); ++MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch b/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch new file mode 100644 index 0000000000..05c36517d7 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/816-ssb_fix_irq_setup.patch @@ -0,0 +1,183 @@ +the current ssb irq setup (in ssb_mipscore_init) have some problem : +it configure some device on some irq without checking that the irq is not taken by an other device. + +For example in my case PCI host is on irq 0 and IPSEC on irq 3. +The current code : +- store in dev->irq that IPSEC irq is 3+2 +- do a set_irq 0->3 on PCI host + +But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This cause problem described in [1]. + +This patch try to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0. +The previous example become : +- store in dev->irq that IPSEC irq is 3+2 +- do a set_irq 0->3 on PCI host : + - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC + + +I also added some code to print the irq configuration before and after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq. + + +[1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES + +Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { + + static inline u32 ssb_irqflag(struct ssb_device *dev) + { +- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); ++ if (tpsflag) ++ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ else ++ /* not irq supported */ ++ return 0x3f; ++} ++ ++static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) ++{ ++ struct ssb_bus *bus = rdev->bus; ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ if (ssb_irqflag(dev) == irqflag) ++ return dev; ++ } ++ return NULL; + } + + /* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. ++ * If disabled, 5 is returned. ++ * If not supported, 6 is returned. + */ + unsigned int ssb_mips_irq(struct ssb_device *dev) + { + struct ssb_bus *bus = dev->bus; ++ struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag; + u32 ipsflag; + u32 tmp; + unsigned int irq; + + irqflag = ssb_irqflag(dev); ++ if (irqflag == 0x3f) ++ return 6; + ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); + for (irq = 1; irq <= 4; irq++) { + tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); + if (tmp == irqflag) + break; + } +- if (irq == 5) +- irq = 0; ++ if (irq == 5) { ++ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) ++ irq = 0; ++ } + + return irq; + } +@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d + struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag = ssb_irqflag(dev); + ++ BUG_ON(oldirq == 6); ++ + dev->irq = irq + 2; + +- ssb_dprintk(KERN_INFO PFX +- "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.coreid, oldirq, irq); + /* clear the old irq */ + if (oldirq == 0) + ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); +- else ++ else if (oldirq != 5) + clear_irq(bus, oldirq); + + /* assign the new one */ + if (irq == 0) { + ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); + } else { ++ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); ++ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { ++ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; ++ struct ssb_device *olddev = find_device(dev, oldipsflag); ++ if (olddev) ++ set_irq(olddev, 0); ++ } + irqflag <<= ipsflag_irq_shift[irq]; +- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); ++ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } ++ ssb_dprintk(KERN_INFO PFX ++ "set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.coreid, oldirq+2, irq+2); ++} ++ ++static void print_irq(struct ssb_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ ssb_dprintk(KERN_INFO PFX ++ "core 0x%04x, irq :", dev->id.coreid); ++ for (i = 0; i <= 6; i++) { ++ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); ++ } ++ ssb_dprintk("\n"); ++} ++ ++static void dump_irq(struct ssb_bus *bus) ++{ ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ print_irq(dev, ssb_mips_irq(dev)); ++ } + } + + static void ssb_mips_serial_init(struct ssb_mipscore *mcore) +@@ -197,18 +253,26 @@ void ssb_mipscore_init(struct ssb_mipsco + else if (bus->chipco.dev) + ssb_chipco_timing_init(&bus->chipco, ns); + ++ dump_irq(bus); + /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ + for (irq = 2, i = 0; i < bus->nr_devices; i++) { ++ int mips_irq; + dev = &(bus->devices[i]); +- dev->irq = ssb_mips_irq(dev) + 2; ++ mips_irq = ssb_mips_irq(dev); ++ if (mips_irq > 4) ++ dev->irq = 0; ++ else ++ dev->irq = mips_irq + 2; ++ if (dev->irq > 5) ++ continue; + switch (dev->id.coreid) { + case SSB_DEV_USB11_HOST: + /* shouldn't need a separate irq line for non-4710, most of them have a proper + * external usb controller on the pci */ + if ((bus->chip_id == 0x4710) && (irq <= 4)) { + set_irq(dev, irq++); +- break; + } ++ break; + /* fallthrough */ + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: +@@ -222,6 +286,8 @@ void ssb_mipscore_init(struct ssb_mipsco + } + } + } ++ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ++ dump_irq(bus); + + ssb_mips_serial_init(mcore); + ssb_mips_flash_detect(mcore); diff --git a/target/linux/brcm47xx/patches-2.6.31/900-disable_early_printk.patch b/target/linux/brcm47xx/patches-2.6.31/900-disable_early_printk.patch new file mode 100644 index 0000000000..95d333f96c --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/900-disable_early_printk.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -76,7 +76,6 @@ config BCM47XX + select SSB_B43_PCI_BRIDGE if PCI + select SSB_PCICORE_HOSTMODE if PCI + select GENERIC_GPIO +- select SYS_HAS_EARLY_PRINTK + select CFE + help + Support for BCM47XX based boards diff --git a/target/linux/brcm47xx/patches-2.6.31/920-cache-wround.patch b/target/linux/brcm47xx/patches-2.6.31/920-cache-wround.patch new file mode 100644 index 0000000000..2938e1cf86 --- /dev/null +++ b/target/linux/brcm47xx/patches-2.6.31/920-cache-wround.patch @@ -0,0 +1,135 @@ +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -20,10 +20,25 @@ + #ifdef CONFIG_BCM47XX + #include <asm/paccess.h> + #include <linux/ssb/ssb.h> +-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))) ++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg() ++ ++static inline unsigned long bcm4710_dummy_rreg(void) { ++ return (*(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))); ++} ++ ++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void*)(addr)) ++ ++static inline unsigned long bcm4710_fill_tlb(void *addr) { ++ return (*(unsigned long *)addr); ++} ++ ++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void*)(addr)) ++ ++static inline void bcm4710_protected_fill_tlb(void *addr) { ++ unsigned long x; ++ get_dbe(x, (unsigned long *)addr);; ++} + +-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) +-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) + #else + #define BCM4710_DUMMY_RREG() + +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -646,6 +646,9 @@ build_get_pgde32(u32 **p, unsigned int t + #endif + uasm_i_addu(p, ptr, tmp, ptr); + #else ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + UASM_i_LA_mostly(p, ptr, pgdc); + #endif + uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ +@@ -784,12 +787,12 @@ static void __cpuinit build_r4000_tlb_re + /* No need for uasm_i_nop */ + } + +-#ifdef CONFIG_BCM47XX +- uasm_i_nop(&p); +-#endif + #ifdef CONFIG_64BIT + build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++# endif + build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ + #endif + +@@ -801,6 +804,9 @@ static void __cpuinit build_r4000_tlb_re + build_update_entries(&p, K0, K1); + build_tlb_write_entry(&p, &l, &r, tlb_random); + uasm_l_leave(&l, p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++#endif + uasm_i_eret(&p); /* return from trap */ + + #ifdef CONFIG_HUGETLB_PAGE +@@ -1241,12 +1247,12 @@ build_r4000_tlbchange_handler_head(u32 * + struct uasm_reloc **r, unsigned int pte, + unsigned int ptr) + { +-#ifdef CONFIG_BCM47XX +- uasm_i_nop(p); +-#endif + #ifdef CONFIG_64BIT + build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++# endif + build_get_pgde32(p, pte, ptr); /* get pgd in ptr */ + #endif + +@@ -1283,6 +1289,9 @@ build_r4000_tlbchange_handler_tail(u32 * + build_update_entries(p, tmp, ptr); + build_tlb_write_entry(p, l, r, tlb_indexed); + uasm_l_leave(l, *p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + uasm_i_eret(p); /* return from trap */ + + #ifdef CONFIG_64BIT +--- a/arch/mips/kernel/genex.S ++++ b/arch/mips/kernel/genex.S +@@ -22,6 +22,19 @@ + #include <asm/page.h> + #include <asm/thread_info.h> + ++#ifdef CONFIG_BCM47XX ++# ifdef eret ++# undef eret ++# endif ++# define eret \ ++ .set push; \ ++ .set noreorder; \ ++ nop; \ ++ nop; \ ++ eret; \ ++ .set pop; ++#endif ++ + #define PANIC_PIC(msg) \ + .set push; \ + .set reorder; \ +@@ -54,7 +67,6 @@ NESTED(except_vec3_generic, 0, sp) + .set noat + #ifdef CONFIG_BCM47XX + nop +- nop + #endif + #if R5432_CP0_INTERRUPT_WAR + mfc0 k0, CP0_INDEX +@@ -79,6 +91,9 @@ NESTED(except_vec3_r4000, 0, sp) + .set push + .set mips3 + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++#endif + mfc0 k1, CP0_CAUSE + li k0, 31<<2 + andi k1, k1, 0x7c |