octeon: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43635

23 files changed, 0 insertions, 8719 deletions

diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Kconfig b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Kconfig
deleted file mode 100644
index 018af6db08..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config OCTEON_USB
-	tristate "Cavium Networks Octeon USB support"
-	depends on CPU_CAVIUM_OCTEON && USB
-	help
-	  This driver supports USB host controller on some Cavium
-	  Networks' products in the Octeon family.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called octeon-usb.
-
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Makefile b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Makefile
deleted file mode 100644
index 89df1ad8be..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-${CONFIG_OCTEON_USB} := octeon-usb.o
-octeon-usb-y := octeon-hcd.o
-octeon-usb-y += cvmx-usb.o
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/TODO b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/TODO
deleted file mode 100644
index cc58a7e88b..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/TODO
+++ /dev/null
@@ -1,11 +0,0 @@
-This driver is functional and has been tested on EdgeRouter Lite with
-USB mass storage.
-
-TODO:
-	- kernel coding style
-	- checkpatch warnings
-	- dead code elimination
-	- device tree bindings
-	- possibly eliminate the extra "hardware abstraction layer"
-
-Contact: Aaro Koskinen <aaro.koskinen@iki.fi>
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.c b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.c
deleted file mode 100644
index bf366495fd..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.c
+++ /dev/null
@@ -1,3229 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export  control
- * laws, including the U.S. Export Administration Act and its  associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
- * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * @file
- *
- * "cvmx-usb.c" defines a set of low level USB functions to help
- * developers create Octeon USB drivers for various operating
- * systems. These functions provide a generic API to the Octeon
- * USB blocks, hiding the internal hardware specific
- * operations.
- *
- * <hr>$Revision: 32636 $<hr>
- */
-#include <linux/delay.h>
-#include <asm/octeon/cvmx.h>
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-sysinfo.h>
-#include "cvmx-usbnx-defs.h"
-#include "cvmx-usbcx-defs.h"
-#include "cvmx-usb.h"
-#include <asm/octeon/cvmx-helper.h>
-#include <asm/octeon/cvmx-helper-board.h>
-
-#define CVMX_PREFETCH0(address) CVMX_PREFETCH(address, 0)
-#define CVMX_PREFETCH128(address) CVMX_PREFETCH(address, 128)
-// a normal prefetch
-#define CVMX_PREFETCH(address, offset) CVMX_PREFETCH_PREF0(address, offset)
-// normal prefetches that use the pref instruction
-#define CVMX_PREFETCH_PREFX(X, address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (X))
-#define CVMX_PREFETCH_PREF0(address, offset) CVMX_PREFETCH_PREFX(0, address, offset)
-#define CVMX_CLZ(result, input) asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
-
-#define cvmx_likely likely
-#define cvmx_wait_usec udelay
-#define cvmx_unlikely unlikely
-#define cvmx_le16_to_cpu le16_to_cpu
-
-#define MAX_RETRIES         3   /* Maximum number of times to retry failed transactions */
-#define MAX_PIPES           32  /* Maximum number of pipes that can be open at once */
-#define MAX_TRANSACTIONS    256 /* Maximum number of outstanding transactions across all pipes */
-#define MAX_CHANNELS        8   /* Maximum number of hardware channels supported by the USB block */
-#define MAX_USB_ADDRESS     127 /* The highest valid USB device address */
-#define MAX_USB_ENDPOINT    15  /* The highest valid USB endpoint number */
-#define MAX_USB_HUB_PORT    15  /* The highest valid port number on a hub */
-#define MAX_TRANSFER_BYTES  ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */
-#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */
-
-/* These defines disable the normal read and write csr. This is so I can add
-    extra debug stuff to the usb specific version and I won't use the normal
-    version by mistake */
-#define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr
-#define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr
-
-typedef enum {
-    __CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16,
-} cvmx_usb_transaction_flags_t;
-
-enum {
-	USB_CLOCK_TYPE_REF_12,
-	USB_CLOCK_TYPE_REF_24,
-	USB_CLOCK_TYPE_REF_48,
-	USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
-/**
- * Logical transactions may take numerous low level
- * transactions, especially when splits are concerned. This
- * enum represents all of the possible stages a transaction can
- * be in. Note that split completes are always even. This is so
- * the NAK handler can backup to the previous low level
- * transaction with a simple clearing of bit 0.
- */
-typedef enum {
-    CVMX_USB_STAGE_NON_CONTROL,
-    CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
-    CVMX_USB_STAGE_SETUP,
-    CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
-    CVMX_USB_STAGE_DATA,
-    CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
-    CVMX_USB_STAGE_STATUS,
-    CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
-} cvmx_usb_stage_t;
-
-/**
- * This structure describes each pending USB transaction
- * regardless of type. These are linked together to form a list
- * of pending requests for a pipe.
- */
-typedef struct cvmx_usb_transaction {
-    struct cvmx_usb_transaction *prev;  /**< Transaction before this one in the pipe */
-    struct cvmx_usb_transaction *next;  /**< Transaction after this one in the pipe */
-    cvmx_usb_transfer_t type;           /**< Type of transaction, duplicated of the pipe */
-    cvmx_usb_transaction_flags_t flags; /**< State flags for this transaction */
-    uint64_t buffer;                    /**< User's physical buffer address to read/write */
-    int buffer_length;                  /**< Size of the user's buffer in bytes */
-    uint64_t control_header;            /**< For control transactions, physical address of the 8 byte standard header */
-    int iso_start_frame;                /**< For ISO transactions, the starting frame number */
-    int iso_number_packets;             /**< For ISO transactions, the number of packets in the request */
-    cvmx_usb_iso_packet_t *iso_packets; /**< For ISO transactions, the sub packets in the request */
-    int xfersize;
-    int pktcnt;
-    int retries;
-    int actual_bytes;                   /**< Actual bytes transfer for this transaction */
-    cvmx_usb_stage_t stage;             /**< For control transactions, the current stage */
-    cvmx_usb_callback_func_t callback;  /**< User's callback function when complete */
-    void *callback_data;                /**< User's data */
-} cvmx_usb_transaction_t;
-
-/**
- * A pipe represents a virtual connection between Octeon and some
- * USB device. It contains a list of pending request to the device.
- */
-typedef struct cvmx_usb_pipe {
-    struct cvmx_usb_pipe *prev;         /**< Pipe before this one in the list */
-    struct cvmx_usb_pipe *next;         /**< Pipe after this one in the list */
-    cvmx_usb_transaction_t *head;       /**< The first pending transaction */
-    cvmx_usb_transaction_t *tail;       /**< The last pending transaction */
-    uint64_t interval;                  /**< For periodic pipes, the interval between packets in frames */
-    uint64_t next_tx_frame;             /**< The next frame this pipe is allowed to transmit on */
-    cvmx_usb_pipe_flags_t flags;        /**< State flags for this pipe */
-    cvmx_usb_speed_t device_speed;      /**< Speed of device connected to this pipe */
-    cvmx_usb_transfer_t transfer_type;  /**< Type of transaction supported by this pipe */
-    cvmx_usb_direction_t transfer_dir;  /**< IN or OUT. Ignored for Control */
-    int multi_count;                    /**< Max packet in a row for the device */
-    uint16_t max_packet;                /**< The device's maximum packet size in bytes */
-    uint8_t device_addr;                /**< USB device address at other end of pipe */
-    uint8_t endpoint_num;               /**< USB endpoint number at other end of pipe */
-    uint8_t hub_device_addr;            /**< Hub address this device is connected to */
-    uint8_t hub_port;                   /**< Hub port this device is connected to */
-    uint8_t pid_toggle;                 /**< This toggles between 0/1 on every packet send to track the data pid needed */
-    uint8_t channel;                    /**< Hardware DMA channel for this pipe */
-    int8_t  split_sc_frame;             /**< The low order bits of the frame number the split complete should be sent on */
-} cvmx_usb_pipe_t;
-
-typedef struct {
-    cvmx_usb_pipe_t *head;              /**< Head of the list, or NULL if empty */
-    cvmx_usb_pipe_t *tail;              /**< Tail if the list, or NULL if empty */
-} cvmx_usb_pipe_list_t;
-
-typedef struct {
-    struct {
-        int channel;
-        int size;
-        uint64_t address;
-    } entry[MAX_CHANNELS+1];
-    int head;
-    int tail;
-} cvmx_usb_tx_fifo_t;
-
-/**
- * The state of the USB block is stored in this structure
- */
-typedef struct {
-    int init_flags;                     /**< Flags passed to initialize */
-    int index;                          /**< Which USB block this is for */
-    int idle_hardware_channels;         /**< Bit set for every idle hardware channel */
-    cvmx_usbcx_hprt_t usbcx_hprt;       /**< Stored port status so we don't need to read a CSR to determine splits */
-    cvmx_usb_pipe_t *pipe_for_channel[MAX_CHANNELS];    /**< Map channels to pipes */
-    cvmx_usb_transaction_t *free_transaction_head;      /**< List of free transactions head */
-    cvmx_usb_transaction_t *free_transaction_tail;      /**< List of free transactions tail */
-    cvmx_usb_pipe_t pipe[MAX_PIPES];                    /**< Storage for pipes */
-    cvmx_usb_transaction_t transaction[MAX_TRANSACTIONS];       /**< Storage for transactions */
-    cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END]; /**< User global callbacks */
-    void *callback_data[__CVMX_USB_CALLBACK_END];               /**< User data for each callback */
-    int indent;                         /**< Used by debug output to indent functions */
-    cvmx_usb_port_status_t port_status; /**< Last port status used for change notification */
-    cvmx_usb_pipe_list_t free_pipes;    /**< List of all pipes that are currently closed */
-    cvmx_usb_pipe_list_t idle_pipes;    /**< List of open pipes that have no transactions */
-    cvmx_usb_pipe_list_t active_pipes[4]; /**< Active pipes indexed by transfer type */
-    uint64_t frame_number;              /**< Increments every SOF interrupt for time keeping */
-    cvmx_usb_transaction_t *active_split; /**< Points to the current active split, or NULL */
-    cvmx_usb_tx_fifo_t periodic;
-    cvmx_usb_tx_fifo_t nonperiodic;
-} cvmx_usb_internal_state_t;
-
-/* This macro logs out whenever a function is called if debugging is on */
-#define CVMX_USB_LOG_CALLED() \
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
-        cvmx_dprintf("%*s%s: called\n", 2*usb->indent++, "", __FUNCTION__);
-
-/* This macro logs out each function parameter if debugging is on */
-#define CVMX_USB_LOG_PARAM(format, param) \
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
-        cvmx_dprintf("%*s%s: param %s = " format "\n", 2*usb->indent, "", __FUNCTION__, #param, param);
-
-/* This macro logs out when a function returns a value */
-#define CVMX_USB_RETURN(v)                                              \
-    do {                                                                \
-        typeof(v) r = v;                                                \
-        if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS))    \
-            cvmx_dprintf("%*s%s: returned %s(%d)\n", 2*--usb->indent, "", __FUNCTION__, #v, r); \
-        return r;                                                       \
-    } while (0);
-
-/* This macro logs out when a function doesn't return a value */
-#define CVMX_USB_RETURN_NOTHING()                                       \
-    do {                                                                \
-        if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS))    \
-            cvmx_dprintf("%*s%s: returned\n", 2*--usb->indent, "", __FUNCTION__); \
-        return;                                                         \
-    } while (0);
-
-/* This macro spins on a field waiting for it to reach a value */
-#define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\
-    ({int result;                                                       \
-    do {                                                                \
-        uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec *     \
-			octeon_get_clock_rate() / 1000000;		\
-        type c;                                                         \
-        while (1)                                                       \
-        {                                                               \
-            c.u32 = __cvmx_usb_read_csr32(usb, address);                \
-            if (c.s.field op (value)) {                                 \
-                result = 0;                                             \
-                break;                                                  \
-            } else if (cvmx_get_cycle() > done) {                       \
-                result = -1;                                            \
-                break;                                                  \
-            } else                                                      \
-                cvmx_wait(100);                                         \
-        }                                                               \
-    } while (0);                                                        \
-    result;})
-
-/* This macro logically sets a single field in a CSR. It does the sequence
-    read, modify, and write */
-#define USB_SET_FIELD32(address, type, field, value)\
-    do {                                            \
-        type c;                                     \
-        c.u32 = __cvmx_usb_read_csr32(usb, address);\
-        c.s.field = value;                          \
-        __cvmx_usb_write_csr32(usb, address, c.u32);\
-    } while (0)
-
-/* Returns the IO address to push/pop stuff data from the FIFOs */
-#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
-
-static int octeon_usb_get_clock_type(void)
-{
-	switch (cvmx_sysinfo_get()->board_type) {
-	case CVMX_BOARD_TYPE_BBGW_REF:
-	case CVMX_BOARD_TYPE_LANAI2_A:
-	case CVMX_BOARD_TYPE_LANAI2_U:
-	case CVMX_BOARD_TYPE_LANAI2_G:
-		return USB_CLOCK_TYPE_CRYSTAL_12;
-	}
-
-	/* FIXME: This should use CVMX_BOARD_TYPE_UBNT_E100 */
-	if (OCTEON_IS_MODEL(OCTEON_CN50XX) &&
-	    cvmx_sysinfo_get()->board_type == 20002)
-		return USB_CLOCK_TYPE_CRYSTAL_12;
-
-	return USB_CLOCK_TYPE_REF_48;
-}
-
-/**
- * @INTERNAL
- * Read a USB 32bit CSR. It performs the necessary address swizzle
- * for 32bit CSRs and logs the value in a readable format if
- * debugging is on.
- *
- * @param usb     USB block this access is for
- * @param address 64bit address to read
- *
- * @return Result of the read
- */
-static inline uint32_t __cvmx_usb_read_csr32(cvmx_usb_internal_state_t *usb,
-                                             uint64_t address)
-{
-    uint32_t result = cvmx_read64_uint32(address ^ 4);
-    return result;
-}
-
-
-/**
- * @INTERNAL
- * Write a USB 32bit CSR. It performs the necessary address
- * swizzle for 32bit CSRs and logs the value in a readable format
- * if debugging is on.
- *
- * @param usb     USB block this access is for
- * @param address 64bit address to write
- * @param value   Value to write
- */
-static inline void __cvmx_usb_write_csr32(cvmx_usb_internal_state_t *usb,
-                                          uint64_t address, uint32_t value)
-{
-    cvmx_write64_uint32(address ^ 4, value);
-    cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-}
-
-
-/**
- * @INTERNAL
- * Read a USB 64bit CSR. It logs the value in a readable format if
- * debugging is on.
- *
- * @param usb     USB block this access is for
- * @param address 64bit address to read
- *
- * @return Result of the read
- */
-static inline uint64_t __cvmx_usb_read_csr64(cvmx_usb_internal_state_t *usb,
-                                             uint64_t address)
-{
-    uint64_t result = cvmx_read64_uint64(address);
-    return result;
-}
-
-
-/**
- * @INTERNAL
- * Write a USB 64bit CSR. It logs the value in a readable format
- * if debugging is on.
- *
- * @param usb     USB block this access is for
- * @param address 64bit address to write
- * @param value   Value to write
- */
-static inline void __cvmx_usb_write_csr64(cvmx_usb_internal_state_t *usb,
-                                          uint64_t address, uint64_t value)
-{
-    cvmx_write64_uint64(address, value);
-}
-
-
-/**
- * @INTERNAL
- * Utility function to convert complete codes into strings
- *
- * @param complete_code
- *               Code to convert
- *
- * @return Human readable string
- */
-static const char *__cvmx_usb_complete_to_string(cvmx_usb_complete_t complete_code)
-{
-    switch (complete_code)
-    {
-        case CVMX_USB_COMPLETE_SUCCESS: return "SUCCESS";
-        case CVMX_USB_COMPLETE_SHORT:   return "SHORT";
-        case CVMX_USB_COMPLETE_CANCEL:  return "CANCEL";
-        case CVMX_USB_COMPLETE_ERROR:   return "ERROR";
-        case CVMX_USB_COMPLETE_STALL:   return "STALL";
-        case CVMX_USB_COMPLETE_XACTERR: return "XACTERR";
-        case CVMX_USB_COMPLETE_DATATGLERR: return "DATATGLERR";
-        case CVMX_USB_COMPLETE_BABBLEERR: return "BABBLEERR";
-        case CVMX_USB_COMPLETE_FRAMEERR: return "FRAMEERR";
-    }
-    return "Update __cvmx_usb_complete_to_string";
-}
-
-
-/**
- * @INTERNAL
- * Return non zero if this pipe connects to a non HIGH speed
- * device through a high speed hub.
- *
- * @param usb    USB block this access is for
- * @param pipe   Pipe to check
- *
- * @return Non zero if we need to do split transactions
- */
-static inline int __cvmx_usb_pipe_needs_split(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_t *pipe)
-{
-    return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH));
-}
-
-
-/**
- * @INTERNAL
- * Trivial utility function to return the correct PID for a pipe
- *
- * @param pipe   pipe to check
- *
- * @return PID for pipe
- */
-static inline int __cvmx_usb_get_data_pid(cvmx_usb_pipe_t *pipe)
-{
-    if (pipe->pid_toggle)
-        return 2; /* Data1 */
-    else
-        return 0; /* Data0 */
-}
-
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * cvmx_usb_state_t structures.
- *
- * @return Number of port, zero if usb isn't supported
- */
-int cvmx_usb_get_num_ports(void)
-{
-    int arch_ports = 0;
-
-    if (OCTEON_IS_MODEL(OCTEON_CN56XX))
-        arch_ports = 1;
-    else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
-        arch_ports = 2;
-    else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
-        arch_ports = 1;
-    else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
-        arch_ports = 1;
-    else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
-        arch_ports = 1;
-    else
-        arch_ports = 0;
-
-    return arch_ports;
-}
-
-
-/**
- * @INTERNAL
- * Allocate a usb transaction for use
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return Transaction or NULL
- */
-static inline cvmx_usb_transaction_t *__cvmx_usb_alloc_transaction(cvmx_usb_internal_state_t *usb)
-{
-    cvmx_usb_transaction_t *t;
-    t = usb->free_transaction_head;
-    if (t) {
-        usb->free_transaction_head = t->next;
-        if (!usb->free_transaction_head)
-            usb->free_transaction_tail = NULL;
-    }
-    else if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-        cvmx_dprintf("%s: Failed to allocate a transaction\n", __FUNCTION__);
-    if (t) {
-        memset(t, 0, sizeof(*t));
-        t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE;
-    }
-    return t;
-}
-
-
-/**
- * @INTERNAL
- * Free a usb transaction
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param transaction
- *               Transaction to free
- */
-static inline void __cvmx_usb_free_transaction(cvmx_usb_internal_state_t *usb,
-                                        cvmx_usb_transaction_t *transaction)
-{
-    transaction->flags = 0;
-    transaction->prev = NULL;
-    transaction->next = NULL;
-    if (usb->free_transaction_tail)
-        usb->free_transaction_tail->next = transaction;
-    else
-        usb->free_transaction_head = transaction;
-    usb->free_transaction_tail = transaction;
-}
-
-
-/**
- * @INTERNAL
- * Add a pipe to the tail of a list
- * @param list   List to add pipe to
- * @param pipe   Pipe to add
- */
-static inline void __cvmx_usb_append_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
-{
-    pipe->next = NULL;
-    pipe->prev = list->tail;
-    if (list->tail)
-        list->tail->next = pipe;
-    else
-        list->head = pipe;
-    list->tail = pipe;
-}
-
-
-/**
- * @INTERNAL
- * Remove a pipe from a list
- * @param list   List to remove pipe from
- * @param pipe   Pipe to remove
- */
-static inline void __cvmx_usb_remove_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
-{
-    if (list->head == pipe) {
-        list->head = pipe->next;
-        pipe->next = NULL;
-        if (list->head)
-            list->head->prev = NULL;
-        else
-            list->tail = NULL;
-    }
-    else if (list->tail == pipe) {
-        list->tail = pipe->prev;
-        list->tail->next = NULL;
-        pipe->prev = NULL;
-    }
-    else {
-        pipe->prev->next = pipe->next;
-        pipe->next->prev = pipe->prev;
-        pipe->prev = NULL;
-        pipe->next = NULL;
-    }
-}
-
-
-/**
- * Initialize a USB port for use. This must be called before any
- * other access to the Octeon USB port is made. The port starts
- * off in the disabled state.
- *
- * @param state  Pointer to an empty cvmx_usb_state_t structure
- *               that will be populated by the initialize call.
- *               This structure is then passed to all other USB
- *               functions.
- * @param usb_port_number
- *               Which Octeon USB port to initialize.
- * @param flags  Flags to control hardware initialization. See
- *               cvmx_usb_initialize_flags_t for the flag
- *               definitions. Some flags are mandatory.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
-                                      int usb_port_number,
-                                      cvmx_usb_initialize_flags_t flags)
-{
-    cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
-    cvmx_usbnx_usbp_ctl_status_t usbn_usbp_ctl_status;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    usb->init_flags = flags;
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", usb_port_number);
-    CVMX_USB_LOG_PARAM("0x%x", flags);
-
-    /* Make sure that state is large enough to store the internal state */
-    if (sizeof(*state) < sizeof(*usb))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    /* At first allow 0-1 for the usb port number */
-    if ((usb_port_number < 0) || (usb_port_number > 1))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    /* For all chips except 52XX there is only one port */
-    if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    /* Try to determine clock type automatically */
-    if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI |
-                  CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0) {
-        if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12)
-            flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;  /* Only 12 MHZ crystals are supported */
-        else
-            flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-    }
-
-    if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
-        /* Check for auto ref clock frequency */
-        if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK))
-            switch (octeon_usb_get_clock_type()) {
-                case USB_CLOCK_TYPE_REF_12:
-                    flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
-                    break;
-                case USB_CLOCK_TYPE_REF_24:
-                    flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
-                    break;
-                case USB_CLOCK_TYPE_REF_48:
-                    flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
-                    break;
-                default:
-                    CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-                    break;
-            }
-    }
-
-    memset(usb, 0, sizeof(usb));
-    usb->init_flags = flags;
-
-    /* Initialize the USB state structure */
-    {
-        int i;
-        usb->index = usb_port_number;
-
-        /* Initialize the transaction double linked list */
-        usb->free_transaction_head = NULL;
-        usb->free_transaction_tail = NULL;
-        for (i=0; i<MAX_TRANSACTIONS; i++)
-            __cvmx_usb_free_transaction(usb, usb->transaction + i);
-        for (i=0; i<MAX_PIPES; i++)
-            __cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i);
-    }
-
-    /* Power On Reset and PHY Initialization */
-
-    /* 1. Wait for DCOK to assert (nothing to do) */
-    /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
-        USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */
-    usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
-    usbn_clk_ctl.s.por = 1;
-    usbn_clk_ctl.s.hrst = 0;
-    usbn_clk_ctl.s.prst = 0;
-    usbn_clk_ctl.s.hclk_rst = 0;
-    usbn_clk_ctl.s.enable = 0;
-    /* 2b. Select the USB reference clock/crystal parameters by writing
-        appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */
-    if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
-        /* The USB port uses 12/24/48MHz 2.5V board clock
-            source at USB_XO. USB_XI should be tied to GND.
-            Most Octeon evaluation boards require this setting */
-        if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
-            usbn_clk_ctl.cn31xx.p_rclk  = 1; /* From CN31XX,CN30XX manual */
-            usbn_clk_ctl.cn31xx.p_xenbn = 0;
-        }
-        else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
-            usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */
-        else
-            usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */
-
-        switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
-            case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
-                usbn_clk_ctl.s.p_c_sel = 0;
-                break;
-            case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
-                usbn_clk_ctl.s.p_c_sel = 1;
-                break;
-            case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
-                usbn_clk_ctl.s.p_c_sel = 2;
-                break;
-        }
-    }
-    else {
-        /* The USB port uses a 12MHz crystal as clock source
-            at USB_XO and USB_XI */
-        if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
-            usbn_clk_ctl.cn31xx.p_rclk  = 1; /* From CN31XX,CN30XX manual */
-            usbn_clk_ctl.cn31xx.p_xenbn = 1;
-        }
-        else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
-            usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */
-        else
-            usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */
-
-        usbn_clk_ctl.s.p_c_sel = 0;
-    }
-    /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
-        setting USBN0/1_CLK_CTL[ENABLE] = 1.  Divide the core clock down such
-        that USB is as close as possible to 125Mhz */
-    {
-        int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
-        if (divisor < 4)  /* Lower than 4 doesn't seem to work properly */
-            divisor = 4;
-        usbn_clk_ctl.s.divide = divisor;
-        usbn_clk_ctl.s.divide2 = 0;
-    }
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
-    usbn_clk_ctl.s.hclk_rst = 1;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    /* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
-    cvmx_wait(64);
-    /* 3. Program the power-on reset field in the USBN clock-control register:
-        USBN_CLK_CTL[POR] = 0 */
-    usbn_clk_ctl.s.por = 0;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    /* 4. Wait 1 ms for PHY clock to start */
-    cvmx_wait_usec(1000);
-    /* 5. Program the Reset input from automatic test equipment field in the
-        USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */
-    usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
-    usbn_usbp_ctl_status.s.ate_reset = 1;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-                           usbn_usbp_ctl_status.u64);
-    /* 6. Wait 10 cycles */
-    cvmx_wait(10);
-    /* 7. Clear ATE_RESET field in the USBN clock-control register:
-        USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */
-    usbn_usbp_ctl_status.s.ate_reset = 0;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-                           usbn_usbp_ctl_status.u64);
-    /* 8. Program the PHY reset field in the USBN clock-control register:
-        USBN_CLK_CTL[PRST] = 1 */
-    usbn_clk_ctl.s.prst = 1;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    /* 9. Program the USBP control and status register to select host or
-        device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
-        device */
-    usbn_usbp_ctl_status.s.hst_mode = 0;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-                           usbn_usbp_ctl_status.u64);
-    /* 10. Wait 1 us */
-    cvmx_wait_usec(1);
-    /* 11. Program the hreset_n field in the USBN clock-control register:
-        USBN_CLK_CTL[HRST] = 1 */
-    usbn_clk_ctl.s.hrst = 1;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    /* 12. Proceed to USB core initialization */
-    usbn_clk_ctl.s.enable = 1;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    cvmx_wait_usec(1);
-
-    /* USB Core Initialization */
-
-    /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
-        determine USB core configuration parameters. */
-    /* Nothing needed */
-    /* 2. Program the following fields in the global AHB configuration
-        register (USBC_GAHBCFG)
-        DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
-        Burst length, USBC_GAHBCFG[HBSTLEN] = 0
-        Nonperiodic TxFIFO empty level (slave mode only),
-        USBC_GAHBCFG[NPTXFEMPLVL]
-        Periodic TxFIFO empty level (slave mode only),
-        USBC_GAHBCFG[PTXFEMPLVL]
-        Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */
-    {
-        cvmx_usbcx_gahbcfg_t usbcx_gahbcfg;
-        /* Due to an errata, CN31XX doesn't support DMA */
-        if (OCTEON_IS_MODEL(OCTEON_CN31XX))
-            usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
-        usbcx_gahbcfg.u32 = 0;
-        usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
-        if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-            usb->idle_hardware_channels = 0x1;  /* Only use one channel with non DMA */
-        else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
-            usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */
-        else
-            usb->idle_hardware_channels = 0xff;
-        usbcx_gahbcfg.s.hbstlen = 0;
-        usbcx_gahbcfg.s.nptxfemplvl = 1;
-        usbcx_gahbcfg.s.ptxfemplvl = 1;
-        usbcx_gahbcfg.s.glblintrmsk = 1;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
-                               usbcx_gahbcfg.u32);
-    }
-    /* 3. Program the following fields in USBC_GUSBCFG register.
-        HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
-        ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
-        USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
-        PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */
-    {
-        cvmx_usbcx_gusbcfg_t usbcx_gusbcfg;
-        usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index));
-        usbcx_gusbcfg.s.toutcal = 0;
-        usbcx_gusbcfg.s.ddrsel = 0;
-        usbcx_gusbcfg.s.usbtrdtim = 0x5;
-        usbcx_gusbcfg.s.phylpwrclksel = 0;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
-                               usbcx_gusbcfg.u32);
-    }
-    /* 4. The software must unmask the following bits in the USBC_GINTMSK
-        register.
-        OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
-        Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */
-    {
-        cvmx_usbcx_gintmsk_t usbcx_gintmsk;
-        int channel;
-
-        usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index));
-        usbcx_gintmsk.s.otgintmsk = 1;
-        usbcx_gintmsk.s.modemismsk = 1;
-        usbcx_gintmsk.s.hchintmsk = 1;
-        usbcx_gintmsk.s.sofmsk = 0;
-        /* We need RX FIFO interrupts if we don't have DMA */
-        if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-            usbcx_gintmsk.s.rxflvlmsk = 1;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
-                               usbcx_gintmsk.u32);
-
-        /* Disable all channel interrupts. We'll enable them per channel later */
-        for (channel=0; channel<8; channel++)
-            __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
-    }
-
-    {
-        /* Host Port Initialization */
-        if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-            cvmx_dprintf("%s: USB%d is in host mode\n", __FUNCTION__, usb->index);
-
-        /* 1. Program the host-port interrupt-mask field to unmask,
-            USBC_GINTMSK[PRTINT] = 1 */
-        USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
-                        prtintmsk, 1);
-        USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
-                        disconnintmsk, 1);
-        /* 2. Program the USBC_HCFG register to select full-speed host or
-            high-speed host. */
-        {
-            cvmx_usbcx_hcfg_t usbcx_hcfg;
-            usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
-            usbcx_hcfg.s.fslssupp = 0;
-            usbcx_hcfg.s.fslspclksel = 0;
-            __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
-        }
-        /* 3. Program the port power bit to drive VBUS on the USB,
-            USBC_HPRT[PRTPWR] = 1 */
-        USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1);
-
-        /* Steps 4-15 from the manual are done later in the port enable */
-    }
-
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state)
-{
-    cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    /* Make sure all pipes are closed */
-    if (usb->idle_pipes.head ||
-        usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head ||
-        usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head ||
-        usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head ||
-        usb->active_pipes[CVMX_USB_TRANSFER_BULK].head)
-        CVMX_USB_RETURN(CVMX_USB_BUSY);
-
-    /* Disable the clocks and put them in power on reset */
-    usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
-    usbn_clk_ctl.s.enable = 1;
-    usbn_clk_ctl.s.por = 1;
-    usbn_clk_ctl.s.hclk_rst = 1;
-    usbn_clk_ctl.s.prst = 0;
-    usbn_clk_ctl.s.hrst = 0;
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
-                           usbn_clk_ctl.u64);
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Enable a USB port. After this call succeeds, the USB port is
- * online and servicing requests.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state)
-{
-    cvmx_usbcx_ghwcfg3_t usbcx_ghwcfg3;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-
-    /* If the port is already enabled the just return. We don't need to do
-        anything */
-    if (usb->usbcx_hprt.s.prtena)
-        CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-
-    /* If there is nothing plugged into the port then fail immediately */
-    if (!usb->usbcx_hprt.s.prtconnsts) {
-        if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-            cvmx_dprintf("%s: USB%d Nothing plugged into the port\n", __FUNCTION__, usb->index);
-        CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
-    }
-
-    /* Program the port reset bit to start the reset process */
-    USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1);
-
-    /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset
-        process to complete. */
-    cvmx_wait_usec(50000);
-
-    /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
-    USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0);
-
-    /* Wait for the USBC_HPRT[PRTENA]. */
-    if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t,
-                              prtena, ==, 1, 100000)) {
-        if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-            cvmx_dprintf("%s: Timeout waiting for the port to finish reset\n",
-                         __FUNCTION__);
-        CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
-    }
-
-    /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */
-    usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-        cvmx_dprintf("%s: USB%d is in %s speed mode\n", __FUNCTION__, usb->index,
-                     (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH) ? "high" :
-                     (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_FULL) ? "full" :
-                     "low");
-
-    usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
-
-    /* 13. Program the USBC_GRXFSIZ register to select the size of the receive
-        FIFO (25%). */
-    USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t,
-                    rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
-    /* 14. Program the USBC_GNPTXFSIZ register to select the size and the
-        start address of the non- periodic transmit FIFO for nonperiodic
-        transactions (50%). */
-    {
-        cvmx_usbcx_gnptxfsiz_t siz;
-        siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
-        siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
-        siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32);
-    }
-    /* 15. Program the USBC_HPTXFSIZ register to select the size and start
-        address of the periodic transmit FIFO for periodic transactions (25%). */
-    {
-        cvmx_usbcx_hptxfsiz_t siz;
-        siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
-        siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
-        siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32);
-    }
-    /* Flush all FIFOs */
-    USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfnum, 0x10);
-    USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfflsh, 1);
-    CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
-                          txfflsh, ==, 0, 100);
-    USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, rxfflsh, 1);
-    CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
-                          rxfflsh, ==, 0, 100);
-
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Disable a USB port. After this call the USB port will not
- * generate data transfers and will not generate events.
- * Transactions in process will fail and call their
- * associated callbacks.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state)
-{
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    /* Disable the port */
-    USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtena, 1);
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Get the current state of the USB port. Use this call to
- * determine if the usb port has anything connected, is enabled,
- * or has some sort of error condition. The return value of this
- * call has "changed" bits to signal of the value of some fields
- * have changed between calls. These "changed" fields are based
- * on the last call to cvmx_usb_set_status(). In order to clear
- * them, you must update the status through cvmx_usb_set_status().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return Port status information
- */
-cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state)
-{
-    cvmx_usbcx_hprt_t usbc_hprt;
-    cvmx_usb_port_status_t result;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    memset(&result, 0, sizeof(result));
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-    result.port_enabled = usbc_hprt.s.prtena;
-    result.port_over_current = usbc_hprt.s.prtovrcurract;
-    result.port_powered = usbc_hprt.s.prtpwr;
-    result.port_speed = usbc_hprt.s.prtspd;
-    result.connected = usbc_hprt.s.prtconnsts;
-    result.connect_change = (result.connected != usb->port_status.connected);
-
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS))
-        cvmx_dprintf("%*s%s: returned port enabled=%d, over_current=%d, powered=%d, speed=%d, connected=%d, connect_change=%d\n",
-                     2*(--usb->indent), "", __FUNCTION__,
-                     result.port_enabled,
-                     result.port_over_current,
-                     result.port_powered,
-                     result.port_speed,
-                     result.connected,
-                     result.connect_change);
-    return result;
-}
-
-
-/**
- * Set the current state of the USB port. The status is used as
- * a reference for the "changed" bits returned by
- * cvmx_usb_get_status(). Other than serving as a reference, the
- * status passed to this function is not used. No fields can be
- * changed through this call.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param port_status
- *               Port status to set, most like returned by cvmx_usb_get_status()
- */
-void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status)
-{
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    usb->port_status = port_status;
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Convert a USB transaction into a handle
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param transaction
- *               Transaction to get handle for
- *
- * @return Handle
- */
-static inline int __cvmx_usb_get_submit_handle(cvmx_usb_internal_state_t *usb,
-                                        cvmx_usb_transaction_t *transaction)
-{
-    return ((unsigned long)transaction - (unsigned long)usb->transaction) /
-            sizeof(*transaction);
-}
-
-
-/**
- * @INTERNAL
- * Convert a USB pipe into a handle
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe   Pipe to get handle for
- *
- * @return Handle
- */
-static inline int __cvmx_usb_get_pipe_handle(cvmx_usb_internal_state_t *usb,
-                                        cvmx_usb_pipe_t *pipe)
-{
-    return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe);
-}
-
-
-/**
- * Open a virtual pipe between the host and a USB device. A pipe
- * must be opened before data can be transferred between a device
- * and Octeon.
- *
- * @param state      USB device state populated by
- *                   cvmx_usb_initialize().
- * @param flags      Optional pipe flags defined in
- *                   cvmx_usb_pipe_flags_t.
- * @param device_addr
- *                   USB device address to open the pipe to
- *                   (0-127).
- * @param endpoint_num
- *                   USB endpoint number to open the pipe to
- *                   (0-15).
- * @param device_speed
- *                   The speed of the device the pipe is going
- *                   to. This must match the device's speed,
- *                   which may be different than the port speed.
- * @param max_packet The maximum packet length the device can
- *                   transmit/receive (low speed=0-8, full
- *                   speed=0-1023, high speed=0-1024). This value
- *                   comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <10:0>.
- * @param transfer_type
- *                   The type of transfer this pipe is for.
- * @param transfer_dir
- *                   The direction the pipe is in. This is not
- *                   used for control pipes.
- * @param interval   For ISOCHRONOUS and INTERRUPT transfers,
- *                   this is how often the transfer is scheduled
- *                   for. All other transfers should specify
- *                   zero. The units are in frames (8000/sec at
- *                   high speed, 1000/sec for full speed).
- * @param multi_count
- *                   For high speed devices, this is the maximum
- *                   allowed number of packet per microframe.
- *                   Specify zero for non high speed devices. This
- *                   value comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <12:11>.
- * @param hub_device_addr
- *                   Hub device address this device is connected
- *                   to. Devices connected directly to Octeon
- *                   use zero. This is only used when the device
- *                   is full/low speed behind a high speed hub.
- *                   The address will be of the high speed hub,
- *                   not and full speed hubs after it.
- * @param hub_port   Which port on the hub the device is
- *                   connected. Use zero for devices connected
- *                   directly to Octeon. Like hub_device_addr,
- *                   this is only used for full/low speed
- *                   devices behind a high speed hub.
- *
- * @return A non negative value is a pipe handle. Negative
- *         values are failure codes from cvmx_usb_status_t.
- */
-int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags,
-                       int device_addr, int endpoint_num,
-                       cvmx_usb_speed_t device_speed, int max_packet,
-                       cvmx_usb_transfer_t transfer_type,
-                       cvmx_usb_direction_t transfer_dir, int interval,
-                       int multi_count, int hub_device_addr, int hub_port)
-{
-    cvmx_usb_pipe_t *pipe;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("0x%x", flags);
-    CVMX_USB_LOG_PARAM("%d", device_addr);
-    CVMX_USB_LOG_PARAM("%d", endpoint_num);
-    CVMX_USB_LOG_PARAM("%d", device_speed);
-    CVMX_USB_LOG_PARAM("%d", max_packet);
-    CVMX_USB_LOG_PARAM("%d", transfer_type);
-    CVMX_USB_LOG_PARAM("%d", transfer_dir);
-    CVMX_USB_LOG_PARAM("%d", interval);
-    CVMX_USB_LOG_PARAM("%d", multi_count);
-    CVMX_USB_LOG_PARAM("%d", hub_device_addr);
-    CVMX_USB_LOG_PARAM("%d", hub_port);
-
-    if (cvmx_unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(device_speed > CVMX_USB_SPEED_LOW))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((max_packet <= 0) || (max_packet > 1024)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) &&
-        (transfer_dir != CVMX_USB_DIRECTION_IN)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(interval < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(multi_count < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((device_speed != CVMX_USB_SPEED_HIGH) &&
-        (multi_count != 0)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Find a free pipe */
-    pipe = usb->free_pipes.head;
-    if (!pipe)
-        CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
-    __cvmx_usb_remove_pipe(&usb->free_pipes, pipe);
-    pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN;
-    if ((device_speed == CVMX_USB_SPEED_HIGH) &&
-        (transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-        (transfer_type == CVMX_USB_TRANSFER_BULK))
-        pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-    pipe->device_addr = device_addr;
-    pipe->endpoint_num = endpoint_num;
-    pipe->device_speed = device_speed;
-    pipe->max_packet = max_packet;
-    pipe->transfer_type = transfer_type;
-    pipe->transfer_dir = transfer_dir;
-    /* All pipes use interval to rate limit NAK processing. Force an interval
-        if one wasn't supplied */
-    if (!interval)
-        interval = 1;
-    if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-        pipe->interval = interval*8;
-        /* Force start splits to be schedule on uFrame 0 */
-        pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval;
-    }
-    else {
-        pipe->interval = interval;
-        pipe->next_tx_frame = usb->frame_number + pipe->interval;
-    }
-    pipe->multi_count = multi_count;
-    pipe->hub_device_addr = hub_device_addr;
-    pipe->hub_port = hub_port;
-    pipe->pid_toggle = 0;
-    pipe->split_sc_frame = -1;
-    __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
-
-    /* We don't need to tell the hardware about this pipe yet since
-        it doesn't have any submitted requests */
-
-    CVMX_USB_RETURN(__cvmx_usb_get_pipe_handle(usb, pipe));
-}
-
-
-/**
- * @INTERNAL
- * Poll the RX FIFOs and remove data as needed. This function is only used
- * in non DMA mode. It is very important that this function be called quickly
- * enough to prevent FIFO overflow.
- *
- * @param usb     USB device state populated by
- *                cvmx_usb_initialize().
- */
-static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb)
-{
-    cvmx_usbcx_grxstsph_t rx_status;
-    int channel;
-    int bytes;
-    uint64_t address;
-    uint32_t *ptr;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-
-    rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index));
-    /* Only read data if IN data is there */
-    if (rx_status.s.pktsts != 2)
-        CVMX_USB_RETURN_NOTHING();
-    /* Check if no data is available */
-    if (!rx_status.s.bcnt)
-        CVMX_USB_RETURN_NOTHING();
-
-    channel = rx_status.s.chnum;
-    bytes = rx_status.s.bcnt;
-    if (!bytes)
-        CVMX_USB_RETURN_NOTHING();
-
-    /* Get where the DMA engine would have written this data */
-    address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8);
-    ptr = cvmx_phys_to_ptr(address);
-    __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes);
-
-    /* Loop writing the FIFO data for this packet into memory */
-    while (bytes > 0) {
-        *ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index));
-        bytes -= 4;
-    }
-    CVMX_SYNCW;
-
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * Fill the TX hardware fifo with data out of the software
- * fifos
- *
- * @param usb       USB device state populated by
- *                  cvmx_usb_initialize().
- * @param fifo      Software fifo to use
- * @param available Amount of space in the hardware fifo
- *
- * @return Non zero if the hardware fifo was too small and needs
- *         to be serviced again.
- */
-static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fifo_t *fifo, int available)
-{
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%p", fifo);
-    CVMX_USB_LOG_PARAM("%d", available);
-
-    /* We're done either when there isn't anymore space or the software FIFO
-        is empty */
-    while (available && (fifo->head != fifo->tail)) {
-        int i = fifo->tail;
-        const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
-        uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4;
-        int words = available;
-
-        /* Limit the amount of data to waht the SW fifo has */
-        if (fifo->entry[i].size <= available) {
-            words = fifo->entry[i].size;
-            fifo->tail++;
-            if (fifo->tail > MAX_CHANNELS)
-                fifo->tail = 0;
-        }
-
-        /* Update the next locations and counts */
-        available -= words;
-        fifo->entry[i].address += words * 4;
-        fifo->entry[i].size -= words;
-
-        /* Write the HW fifo data. The read every three writes is due
-            to an errata on CN3XXX chips */
-        while (words > 3) {
-            cvmx_write64_uint32(csr_address, *ptr++);
-            cvmx_write64_uint32(csr_address, *ptr++);
-            cvmx_write64_uint32(csr_address, *ptr++);
-            cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-            words -= 3;
-        }
-        cvmx_write64_uint32(csr_address, *ptr++);
-        if (--words) {
-            cvmx_write64_uint32(csr_address, *ptr++);
-            if (--words)
-                cvmx_write64_uint32(csr_address, *ptr++);
-        }
-        cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-    }
-    CVMX_USB_RETURN(fifo->head != fifo->tail);
-}
-
-
-/**
- * Check the hardware FIFOs and fill them as needed
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- */
-static void __cvmx_usb_poll_tx_fifo(cvmx_usb_internal_state_t *usb)
-{
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-
-    if (usb->periodic.head != usb->periodic.tail) {
-        cvmx_usbcx_hptxsts_t tx_status;
-        tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index));
-        if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail))
-            USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 1);
-        else
-            USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 0);
-    }
-
-    if (usb->nonperiodic.head != usb->nonperiodic.tail) {
-        cvmx_usbcx_gnptxsts_t tx_status;
-        tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index));
-        if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail))
-            USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 1);
-        else
-            USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 0);
-    }
-
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Fill the TX FIFO with an outgoing packet
- *
- * @param usb     USB device state populated by
- *                cvmx_usb_initialize().
- * @param channel Channel number to get packet from
- */
-static void __cvmx_usb_fill_tx_fifo(cvmx_usb_internal_state_t *usb, int channel)
-{
-    cvmx_usbcx_hccharx_t hcchar;
-    cvmx_usbcx_hcspltx_t usbc_hcsplt;
-    cvmx_usbcx_hctsizx_t usbc_hctsiz;
-    cvmx_usb_tx_fifo_t *fifo;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%d", channel);
-
-    /* We only need to fill data on outbound channels */
-    hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-    if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
-        CVMX_USB_RETURN_NOTHING();
-
-    /* OUT Splits only have data on the start and not the complete */
-    usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index));
-    if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
-        CVMX_USB_RETURN_NOTHING();
-
-    /* Find out how many bytes we need to fill and convert it into 32bit words */
-    usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-    if (!usbc_hctsiz.s.xfersize)
-        CVMX_USB_RETURN_NOTHING();
-
-    if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
-        (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
-        fifo = &usb->periodic;
-    else
-        fifo = &usb->nonperiodic;
-
-    fifo->entry[fifo->head].channel = channel;
-    fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8);
-    fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2;
-    fifo->head++;
-    if (fifo->head > MAX_CHANNELS)
-        fifo->head = 0;
-
-    __cvmx_usb_poll_tx_fifo(usb);
-
-    CVMX_USB_RETURN_NOTHING();
-}
-
-/**
- * @INTERNAL
- * Perform channel specific setup for Control transactions. All
- * the generic stuff will already have been done in
- * __cvmx_usb_start_channel()
- *
- * @param usb     USB device state populated by
- *                cvmx_usb_initialize().
- * @param channel Channel to setup
- * @param pipe    Pipe for control transaction
- */
-static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb,
-                                             int channel,
-                                             cvmx_usb_pipe_t *pipe)
-{
-    cvmx_usb_transaction_t *transaction = pipe->head;
-    cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
-    int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
-    int packets_to_transfer;
-    cvmx_usbcx_hctsizx_t usbc_hctsiz;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%d", channel);
-    CVMX_USB_LOG_PARAM("%p", pipe);
-
-    usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-    switch (transaction->stage) {
-        case CVMX_USB_STAGE_NON_CONTROL:
-        case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-            cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__);
-            break;
-        case CVMX_USB_STAGE_SETUP:
-            usbc_hctsiz.s.pid = 3; /* Setup */
-            bytes_to_transfer = sizeof(*header);
-            /* All Control operations start with a setup going OUT */
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
-            /* Setup send the control header instead of the buffer data. The
-                buffer data will be used in the next stage */
-            __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header);
-            break;
-        case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-            usbc_hctsiz.s.pid = 3; /* Setup */
-            bytes_to_transfer = 0;
-            /* All Control operations start with a setup going OUT */
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
-            USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
-            break;
-        case CVMX_USB_STAGE_DATA:
-            usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-            if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                if (header->s.request_type & 0x80)
-                    bytes_to_transfer = 0;
-                else if (bytes_to_transfer > pipe->max_packet)
-                    bytes_to_transfer = pipe->max_packet;
-            }
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-                            cvmx_usbcx_hccharx_t, epdir,
-                            ((header->s.request_type & 0x80) ?
-                             CVMX_USB_DIRECTION_IN :
-                             CVMX_USB_DIRECTION_OUT));
-            break;
-        case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-            usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-            if (!(header->s.request_type & 0x80))
-                bytes_to_transfer = 0;
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-                            cvmx_usbcx_hccharx_t, epdir,
-                            ((header->s.request_type & 0x80) ?
-                             CVMX_USB_DIRECTION_IN :
-                             CVMX_USB_DIRECTION_OUT));
-            USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
-            break;
-        case CVMX_USB_STAGE_STATUS:
-            usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-            bytes_to_transfer = 0;
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
-                            ((header->s.request_type & 0x80) ?
-                             CVMX_USB_DIRECTION_OUT :
-                             CVMX_USB_DIRECTION_IN));
-            break;
-        case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-            usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-            bytes_to_transfer = 0;
-            USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
-                            ((header->s.request_type & 0x80) ?
-                             CVMX_USB_DIRECTION_OUT :
-                             CVMX_USB_DIRECTION_IN));
-            USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
-            break;
-    }
-
-    /* Make sure the transfer never exceeds the byte limit of the hardware.
-        Further bytes will be sent as continued transactions */
-    if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-        /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
-        bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
-        bytes_to_transfer *= pipe->max_packet;
-    }
-
-    /* Calculate the number of packets to transfer. If the length is zero
-        we still need to transfer one packet */
-    packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
-    if (packets_to_transfer == 0)
-        packets_to_transfer = 1;
-    else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-        /* Limit to one packet when not using DMA. Channels must be restarted
-            between every packet for IN transactions, so there is no reason to
-            do multiple packets in a row */
-        packets_to_transfer = 1;
-        bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-    }
-    else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-        /* Limit the number of packet and data transferred to what the
-            hardware can handle */
-        packets_to_transfer = MAX_TRANSFER_PACKETS;
-        bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-    }
-
-    usbc_hctsiz.s.xfersize = bytes_to_transfer;
-    usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-    __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Start a channel to perform the pipe's head transaction
- *
- * @param usb     USB device state populated by
- *                cvmx_usb_initialize().
- * @param channel Channel to setup
- * @param pipe    Pipe to start
- */
-static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb,
-                                     int channel,
-                                     cvmx_usb_pipe_t *pipe)
-{
-    cvmx_usb_transaction_t *transaction = pipe->head;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%d", channel);
-    CVMX_USB_LOG_PARAM("%p", pipe);
-
-    if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
-        (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
-        cvmx_dprintf("%s: Channel %d started. Pipe %d transaction %d stage %d\n",
-                     __FUNCTION__, channel, __cvmx_usb_get_pipe_handle(usb, pipe),
-                     __cvmx_usb_get_submit_handle(usb, transaction),
-                     transaction->stage);
-
-    /* Make sure all writes to the DMA region get flushed */
-    CVMX_SYNCW;
-
-    /* Attach the channel to the pipe */
-    usb->pipe_for_channel[channel] = pipe;
-    pipe->channel = channel;
-    pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-    /* Mark this channel as in use */
-    usb->idle_hardware_channels &= ~(1<<channel);
-
-    /* Enable the channel interrupt bits */
-    {
-        cvmx_usbcx_hcintx_t usbc_hcint;
-        cvmx_usbcx_hcintmskx_t usbc_hcintmsk;
-        cvmx_usbcx_haintmsk_t usbc_haintmsk;
-
-        /* Clear all channel status bits */
-        usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32);
-
-        usbc_hcintmsk.u32 = 0;
-        usbc_hcintmsk.s.chhltdmsk = 1;
-        if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-            /* Channels need these extra interrupts when we aren't in DMA mode */
-            usbc_hcintmsk.s.datatglerrmsk = 1;
-            usbc_hcintmsk.s.frmovrunmsk = 1;
-            usbc_hcintmsk.s.bblerrmsk = 1;
-            usbc_hcintmsk.s.xacterrmsk = 1;
-            if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                /* Splits don't generate xfercompl, so we need ACK and NYET */
-                usbc_hcintmsk.s.nyetmsk = 1;
-                usbc_hcintmsk.s.ackmsk = 1;
-            }
-            usbc_hcintmsk.s.nakmsk = 1;
-            usbc_hcintmsk.s.stallmsk = 1;
-            usbc_hcintmsk.s.xfercomplmsk = 1;
-        }
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32);
-
-        /* Enable the channel interrupt to propagate */
-        usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index));
-        usbc_haintmsk.s.haintmsk |= 1<<channel;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), usbc_haintmsk.u32);
-    }
-
-    /* Setup the locations the DMA engines use  */
-    {
-        uint64_t dma_address = transaction->buffer + transaction->actual_bytes;
-        if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-            dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes;
-        __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address);
-        __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address);
-    }
-
-    /* Setup both the size of the transfer and the SPLIT characteristics */
-    {
-        cvmx_usbcx_hcspltx_t usbc_hcsplt = {.u32 = 0};
-        cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = 0};
-        int packets_to_transfer;
-        int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
-
-        /* ISOCHRONOUS transactions store each individual transfer size in the
-            packet structure, not the global buffer_length */
-        if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-            bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes;
-
-        /* We need to do split transactions when we are talking to non high
-            speed devices that are behind a high speed hub */
-        if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-            /* On the start split phase (stage is even) record the frame number we
-                will need to send the split complete. We only store the lower two bits
-                since the time ahead can only be two frames */
-            if ((transaction->stage&1) == 0) {
-                if (transaction->type == CVMX_USB_TRANSFER_BULK)
-                    pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f;
-                else
-                    pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f;
-            }
-            else
-                pipe->split_sc_frame = -1;
-
-            usbc_hcsplt.s.spltena = 1;
-            usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
-            usbc_hcsplt.s.prtaddr = pipe->hub_port;
-            usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
-
-            /* SPLIT transactions can only ever transmit one data packet so
-                limit the transfer size to the max packet size */
-            if (bytes_to_transfer > pipe->max_packet)
-                bytes_to_transfer = pipe->max_packet;
-
-            /* ISOCHRONOUS OUT splits are unique in that they limit
-                data transfers to 188 byte chunks representing the
-                begin/middle/end of the data or all */
-            if (!usbc_hcsplt.s.compsplt &&
-                (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-                (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-                /* Clear the split complete frame number as there isn't going
-                    to be a split complete */
-                pipe->split_sc_frame = -1;
-                /* See if we've started this transfer and sent data */
-                if (transaction->actual_bytes == 0) {
-                    /* Nothing sent yet, this is either a begin or the
-                        entire payload */
-                    if (bytes_to_transfer <= 188)
-                        usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */
-                    else
-                        usbc_hcsplt.s.xactpos = 2; /* First part of payload */
-                }
-                else {
-                    /* Continuing the previous data, we must either be
-                        in the middle or at the end */
-                    if (bytes_to_transfer <= 188)
-                        usbc_hcsplt.s.xactpos = 1; /* End of payload */
-                    else
-                        usbc_hcsplt.s.xactpos = 0; /* Middle of payload */
-                }
-                /* Again, the transfer size is limited to 188 bytes */
-                if (bytes_to_transfer > 188)
-                    bytes_to_transfer = 188;
-            }
-        }
-
-        /* Make sure the transfer never exceeds the byte limit of the hardware.
-            Further bytes will be sent as continued transactions */
-        if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-            /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
-            bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
-            bytes_to_transfer *= pipe->max_packet;
-        }
-
-        /* Calculate the number of packets to transfer. If the length is zero
-            we still need to transfer one packet */
-        packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
-        if (packets_to_transfer == 0)
-            packets_to_transfer = 1;
-        else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-            /* Limit to one packet when not using DMA. Channels must be restarted
-                between every packet for IN transactions, so there is no reason to
-                do multiple packets in a row */
-            packets_to_transfer = 1;
-            bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-        }
-        else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-            /* Limit the number of packet and data transferred to what the
-                hardware can handle */
-            packets_to_transfer = MAX_TRANSFER_PACKETS;
-            bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-        }
-
-        usbc_hctsiz.s.xfersize = bytes_to_transfer;
-        usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-        /* Update the DATA0/DATA1 toggle */
-        usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
-        /* High speed pipes may need a hardware ping before they start */
-        if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING)
-            usbc_hctsiz.s.dopng = 1;
-
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32);
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
-    }
-
-    /* Setup the Host Channel Characteristics Register */
-    {
-        cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0};
-
-        /* Set the startframe odd/even properly. This is only used for periodic */
-        usbc_hcchar.s.oddfrm = usb->frame_number&1;
-
-        /* Set the number of back to back packets allowed by this endpoint.
-            Split transactions interpret "ec" as the number of immediate
-            retries of failure. These retries happen too quickly, so we
-            disable these entirely for splits */
-        if (__cvmx_usb_pipe_needs_split(usb, pipe))
-            usbc_hcchar.s.ec = 1;
-        else if (pipe->multi_count < 1)
-            usbc_hcchar.s.ec = 1;
-        else if (pipe->multi_count > 3)
-            usbc_hcchar.s.ec = 3;
-        else
-            usbc_hcchar.s.ec = pipe->multi_count;
-
-        /* Set the rest of the endpoint specific settings */
-        usbc_hcchar.s.devaddr = pipe->device_addr;
-        usbc_hcchar.s.eptype = transaction->type;
-        usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW);
-        usbc_hcchar.s.epdir = pipe->transfer_dir;
-        usbc_hcchar.s.epnum = pipe->endpoint_num;
-        usbc_hcchar.s.mps = pipe->max_packet;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-    }
-
-    /* Do transaction type specific fixups as needed */
-    switch (transaction->type) {
-        case CVMX_USB_TRANSFER_CONTROL:
-            __cvmx_usb_start_channel_control(usb, channel, pipe);
-            break;
-        case CVMX_USB_TRANSFER_BULK:
-        case CVMX_USB_TRANSFER_INTERRUPT:
-            break;
-        case CVMX_USB_TRANSFER_ISOCHRONOUS:
-            if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                /* ISO transactions require different PIDs depending on direction
-                    and how many packets are needed */
-                if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-                    if (pipe->multi_count < 2) /* Need DATA0 */
-                        USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0);
-                    else /* Need MDATA */
-                        USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 3);
-                }
-            }
-            break;
-    }
-    {
-        cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))};
-        transaction->xfersize = usbc_hctsiz.s.xfersize;
-        transaction->pktcnt = usbc_hctsiz.s.pktcnt;
-    }
-    /* Remeber when we start a split transaction */
-    if (__cvmx_usb_pipe_needs_split(usb, pipe))
-        usb->active_split = transaction;
-    USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, chena, 1);
-    if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-        __cvmx_usb_fill_tx_fifo(usb, channel);
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Find a pipe that is ready to be scheduled to hardware.
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param list   Pipe list to search
- * @param current_frame
- *               Frame counter to use as a time reference.
- *
- * @return Pipe or NULL if none are ready
- */
-static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_list_t *list, uint64_t current_frame)
-{
-    cvmx_usb_pipe_t *pipe = list->head;
-    while (pipe) {
-        if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head &&
-            (pipe->next_tx_frame <= current_frame) &&
-            ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) &&
-            (!usb->active_split || (usb->active_split == pipe->head))) {
-            CVMX_PREFETCH(pipe, 128);
-            CVMX_PREFETCH(pipe->head, 0);
-            return pipe;
-        }
-        pipe = pipe->next;
-    }
-    return NULL;
-}
-
-
-/**
- * @INTERNAL
- * Called whenever a pipe might need to be scheduled to the
- * hardware.
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param is_sof True if this schedule was called on a SOF interrupt.
- */
-static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof)
-{
-    int channel;
-    cvmx_usb_pipe_t *pipe;
-    int need_sof;
-    cvmx_usb_transfer_t ttype;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-
-    if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-        /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */
-        cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
-        cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
-        if (hfnum.s.frrem < hfir.s.frint/4)
-            goto done;
-    }
-
-    while (usb->idle_hardware_channels) {
-        /* Find an idle channel */
-        CVMX_CLZ(channel, usb->idle_hardware_channels);
-        channel = 31 - channel;
-        if (cvmx_unlikely(channel > 7)) {
-            if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
-                cvmx_dprintf("%s: Idle hardware channels has a channel higher than 7. This is wrong\n", __FUNCTION__);
-            break;
-        }
-
-        /* Find a pipe needing service */
-        pipe = NULL;
-        if (is_sof) {
-            /* Only process periodic pipes on SOF interrupts. This way we are
-                sure that the periodic data is sent in the beginning of the
-                frame */
-            pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number);
-            if (cvmx_likely(!pipe))
-                pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number);
-        }
-        if (cvmx_likely(!pipe)) {
-            pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number);
-            if (cvmx_likely(!pipe))
-                pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number);
-        }
-        if (!pipe)
-            break;
-
-        CVMX_USB_LOG_PARAM("%d", channel);
-        CVMX_USB_LOG_PARAM("%p", pipe);
-
-        if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
-            (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS))) {
-            cvmx_usb_transaction_t *transaction = pipe->head;
-            const cvmx_usb_control_header_t *header = (transaction->control_header) ? cvmx_phys_to_ptr(transaction->control_header) : NULL;
-            const char *dir = (pipe->transfer_dir == CVMX_USB_DIRECTION_IN) ? "IN" : "OUT";
-            const char *type;
-            switch (pipe->transfer_type) {
-                case CVMX_USB_TRANSFER_CONTROL:
-                    type = "SETUP";
-                    dir = (header->s.request_type & 0x80) ? "IN" : "OUT";
-                    break;
-                case CVMX_USB_TRANSFER_ISOCHRONOUS:
-                    type = "ISOCHRONOUS";
-                    break;
-                case CVMX_USB_TRANSFER_BULK:
-                    type = "BULK";
-                    break;
-                default: /* CVMX_USB_TRANSFER_INTERRUPT */
-                    type = "INTERRUPT";
-                    break;
-            }
-            cvmx_dprintf("%s: Starting pipe %d, transaction %d on channel %d. %s %s len=%d header=0x%llx\n",
-                         __FUNCTION__, __cvmx_usb_get_pipe_handle(usb, pipe),
-                         __cvmx_usb_get_submit_handle(usb, transaction),
-                         channel, type, dir,
-                         transaction->buffer_length,
-                         (header) ? (unsigned long long)header->u64 : 0ull);
-        }
-        __cvmx_usb_start_channel(usb, channel, pipe);
-    }
-
-done:
-    /* Only enable SOF interrupts when we have transactions pending in the
-        future that might need to be scheduled */
-    need_sof = 0;
-    for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
-        pipe = usb->active_pipes[ttype].head;
-        while (pipe) {
-            if (pipe->next_tx_frame > usb->frame_number) {
-                need_sof = 1;
-                break;
-            }
-            pipe=pipe->next;
-        }
-    }
-    USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, sofmsk, need_sof);
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Call a user's callback for a specific reason.
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe   Pipe the callback is for or NULL
- * @param transaction
- *               Transaction the callback is for or NULL
- * @param reason Reason this callback is being called
- * @param complete_code
- *               Completion code for the transaction, if any
- */
-static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb,
-                                        cvmx_usb_pipe_t *pipe,
-                                        cvmx_usb_transaction_t *transaction,
-                                        cvmx_usb_callback_t reason,
-                                        cvmx_usb_complete_t complete_code)
-{
-    cvmx_usb_callback_func_t callback = usb->callback[reason];
-    void *user_data = usb->callback_data[reason];
-    int submit_handle = -1;
-    int pipe_handle = -1;
-    int bytes_transferred = 0;
-
-    if (pipe)
-        pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe);
-
-    if (transaction) {
-        submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
-        bytes_transferred = transaction->actual_bytes;
-        /* Transactions are allowed to override the default callback */
-        if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) {
-            callback = transaction->callback;
-            user_data = transaction->callback_data;
-        }
-    }
-
-    if (!callback)
-        return;
-
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
-        cvmx_dprintf("%*s%s: calling callback %p(usb=%p, complete_code=%s, "
-                     "pipe_handle=%d, submit_handle=%d, bytes_transferred=%d, user_data=%p);\n",
-                     2*usb->indent, "", __FUNCTION__, callback, usb,
-                     __cvmx_usb_complete_to_string(complete_code),
-                     pipe_handle, submit_handle, bytes_transferred, user_data);
-
-    callback((cvmx_usb_state_t *)usb, reason, complete_code, pipe_handle, submit_handle,
-             bytes_transferred, user_data);
-
-    if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
-        cvmx_dprintf("%*s%s: callback %p complete\n", 2*usb->indent, "",
-                      __FUNCTION__, callback);
-}
-
-
-/**
- * @INTERNAL
- * Signal the completion of a transaction and free it. The
- * transaction will be removed from the pipe transaction list.
- *
- * @param usb    USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe   Pipe the transaction is on
- * @param transaction
- *               Transaction that completed
- * @param complete_code
- *               Completion code
- */
-static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb,
-                                        cvmx_usb_pipe_t *pipe,
-                                        cvmx_usb_transaction_t *transaction,
-                                        cvmx_usb_complete_t complete_code)
-{
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%p", pipe);
-    CVMX_USB_LOG_PARAM("%p", transaction);
-    CVMX_USB_LOG_PARAM("%d", complete_code);
-
-    /* If this was a split then clear our split in progress marker */
-    if (usb->active_split == transaction)
-        usb->active_split = NULL;
-
-    /* Isochronous transactions need extra processing as they might not be done
-        after a single data transfer */
-    if (cvmx_unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-        /* Update the number of bytes transferred in this ISO packet */
-        transaction->iso_packets[0].length = transaction->actual_bytes;
-        transaction->iso_packets[0].status = complete_code;
-
-        /* If there are more ISOs pending and we succeeded, schedule the next
-            one */
-        if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) {
-            transaction->actual_bytes = 0;      /* No bytes transferred for this packet as of yet */
-            transaction->iso_number_packets--;  /* One less ISO waiting to transfer */
-            transaction->iso_packets++;         /* Increment to the next location in our packet array */
-            transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-            goto done;
-        }
-    }
-
-    /* Remove the transaction from the pipe list */
-    if (transaction->next)
-        transaction->next->prev = transaction->prev;
-    else
-        pipe->tail = transaction->prev;
-    if (transaction->prev)
-        transaction->prev->next = transaction->next;
-    else
-        pipe->head = transaction->next;
-    if (!pipe->head) {
-        __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe);
-        __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
-
-    }
-    __cvmx_usb_perform_callback(usb, pipe, transaction,
-                                CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
-                                complete_code);
-    __cvmx_usb_free_transaction(usb, transaction);
-done:
-    CVMX_USB_RETURN_NOTHING();
-}
-
-
-/**
- * @INTERNAL
- * Submit a usb transaction to a pipe. Called for all types
- * of transactions.
- *
- * @param usb
- * @param pipe_handle
- *                  Which pipe to submit to. Will be validated in this function.
- * @param type      Transaction type
- * @param flags     Flags for the transaction
- * @param buffer    User buffer for the transaction
- * @param buffer_length
- *                  User buffer's length in bytes
- * @param control_header
- *                  For control transactions, the 8 byte standard header
- * @param iso_start_frame
- *                  For ISO transactions, the start frame
- * @param iso_number_packets
- *                  For ISO, the number of packet in the transaction.
- * @param iso_packets
- *                  A description of each ISO packet
- * @param callback  User callback to call when the transaction completes
- * @param user_data User's data for the callback
- *
- * @return Submit handle or negative on failure. Matches the result
- *         in the external API.
- */
-static int __cvmx_usb_submit_transaction(cvmx_usb_internal_state_t *usb,
-                                         int pipe_handle,
-                                         cvmx_usb_transfer_t type,
-                                         int flags,
-                                         uint64_t buffer,
-                                         int buffer_length,
-                                         uint64_t control_header,
-                                         int iso_start_frame,
-                                         int iso_number_packets,
-                                         cvmx_usb_iso_packet_t *iso_packets,
-                                         cvmx_usb_callback_func_t callback,
-                                         void *user_data)
-{
-    int submit_handle;
-    cvmx_usb_transaction_t *transaction;
-    cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
-
-    CVMX_USB_LOG_CALLED();
-    if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    /* Fail if the pipe isn't open */
-    if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(pipe->transfer_type != type))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    transaction = __cvmx_usb_alloc_transaction(usb);
-    if (cvmx_unlikely(!transaction))
-        CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
-
-    transaction->type = type;
-    transaction->flags |= flags;
-    transaction->buffer = buffer;
-    transaction->buffer_length = buffer_length;
-    transaction->control_header = control_header;
-    transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it
-    transaction->iso_number_packets = iso_number_packets;
-    transaction->iso_packets = iso_packets;
-    transaction->callback = callback;
-    transaction->callback_data = user_data;
-    if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
-        transaction->stage = CVMX_USB_STAGE_SETUP;
-    else
-        transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-
-    transaction->next = NULL;
-    if (pipe->tail) {
-        transaction->prev = pipe->tail;
-        transaction->prev->next = transaction;
-    }
-    else {
-        if (pipe->next_tx_frame < usb->frame_number)
-            pipe->next_tx_frame = usb->frame_number + pipe->interval -
-                (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-        transaction->prev = NULL;
-        pipe->head = transaction;
-        __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
-        __cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe);
-    }
-    pipe->tail = transaction;
-
-    submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
-
-    /* We may need to schedule the pipe if this was the head of the pipe */
-    if (!transaction->prev)
-        __cvmx_usb_schedule(usb, 0);
-
-    CVMX_USB_RETURN(submit_handle);
-}
-
-
-/**
- * Call to submit a USB Bulk transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
-                                uint64_t buffer, int buffer_length,
-                                cvmx_usb_callback_func_t callback,
-                                void *user_data)
-{
-    int submit_handle;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
-    CVMX_USB_LOG_PARAM("%d", buffer_length);
-
-    /* Pipe handle checking is done later in a common place */
-    if (cvmx_unlikely(!buffer))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(buffer_length < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-                                         CVMX_USB_TRANSFER_BULK,
-                                         0, /* flags */
-                                         buffer,
-                                         buffer_length,
-                                         0, /* control_header */
-                                         0, /* iso_start_frame */
-                                         0, /* iso_number_packets */
-                                         NULL, /* iso_packets */
-                                         callback,
-                                         user_data);
-    CVMX_USB_RETURN(submit_handle);
-}
-
-
-/**
- * Call to submit a USB Interrupt transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
-                              uint64_t buffer, int buffer_length,
-                              cvmx_usb_callback_func_t callback,
-                              void *user_data)
-{
-    int submit_handle;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
-    CVMX_USB_LOG_PARAM("%d", buffer_length);
-
-    /* Pipe handle checking is done later in a common place */
-    if (cvmx_unlikely(!buffer))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(buffer_length < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-                                         CVMX_USB_TRANSFER_INTERRUPT,
-                                         0, /* flags */
-                                         buffer,
-                                         buffer_length,
-                                         0, /* control_header */
-                                         0, /* iso_start_frame */
-                                         0, /* iso_number_packets */
-                                         NULL, /* iso_packets */
-                                         callback,
-                                         user_data);
-    CVMX_USB_RETURN(submit_handle);
-}
-
-
-/**
- * Call to submit a USB Control transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param control_header
- *                  USB 8 byte control header physical address.
- *                  Note that this is NOT A POINTER, but the
- *                  full 64bit physical address of the buffer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
-                            uint64_t control_header,
-                            uint64_t buffer, int buffer_length,
-                            cvmx_usb_callback_func_t callback,
-                            void *user_data)
-{
-    int submit_handle;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(control_header);
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)control_header);
-    CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
-    CVMX_USB_LOG_PARAM("%d", buffer_length);
-
-    /* Pipe handle checking is done later in a common place */
-    if (cvmx_unlikely(!control_header))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    /* Some drivers send a buffer with a zero length. God only knows why */
-    if (cvmx_unlikely(buffer && (buffer_length < 0)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(!buffer && (buffer_length != 0)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if ((header->s.request_type & 0x80) == 0)
-        buffer_length = cvmx_le16_to_cpu(header->s.length);
-
-    submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-                                         CVMX_USB_TRANSFER_CONTROL,
-                                         0, /* flags */
-                                         buffer,
-                                         buffer_length,
-                                         control_header,
-                                         0, /* iso_start_frame */
-                                         0, /* iso_number_packets */
-                                         NULL, /* iso_packets */
-                                         callback,
-                                         user_data);
-    CVMX_USB_RETURN(submit_handle);
-}
-
-
-/**
- * Call to submit a USB Isochronous transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param start_frame
- *                  Number of frames into the future to schedule
- *                  this transaction.
- * @param flags     Flags to control the transfer. See
- *                  cvmx_usb_isochronous_flags_t for the flag
- *                  definitions.
- * @param number_packets
- *                  Number of sequential packets to transfer.
- *                  "packets" is a pointer to an array of this
- *                  many packet structures.
- * @param packets   Description of each transfer packet as
- *                  defined by cvmx_usb_iso_packet_t. The array
- *                  pointed to here must stay valid until the
- *                  complete callback is called.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
-                                int start_frame, int flags,
-                                int number_packets,
-                                cvmx_usb_iso_packet_t packets[],
-                                uint64_t buffer, int buffer_length,
-                                cvmx_usb_callback_func_t callback,
-                                void *user_data)
-{
-    int submit_handle;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    CVMX_USB_LOG_PARAM("%d", start_frame);
-    CVMX_USB_LOG_PARAM("0x%x", flags);
-    CVMX_USB_LOG_PARAM("%d", number_packets);
-    CVMX_USB_LOG_PARAM("%p", packets);
-    CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
-    CVMX_USB_LOG_PARAM("%d", buffer_length);
-
-    /* Pipe handle checking is done later in a common place */
-    if (cvmx_unlikely(start_frame < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(number_packets < 1))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(!packets))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(!buffer))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(buffer_length < 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
-                                         CVMX_USB_TRANSFER_ISOCHRONOUS,
-                                         flags,
-                                         buffer,
-                                         buffer_length,
-                                         0, /* control_header */
-                                         start_frame,
-                                         number_packets,
-                                         packets,
-                                         callback,
-                                         user_data);
-    CVMX_USB_RETURN(submit_handle);
-}
-
-
-/**
- * Cancel one outstanding request in a pipe. Canceling a request
- * can fail if the transaction has already completed before cancel
- * is called. Even after a successful cancel call, it may take
- * a frame or two for the cvmx_usb_poll() function to call the
- * associated callback.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- * @param submit_handle
- *               Handle to transaction to cancel, returned by the submit function.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle,
-                                  int submit_handle)
-{
-    cvmx_usb_transaction_t *transaction;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    CVMX_USB_LOG_PARAM("%d", submit_handle);
-
-    if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Fail if the pipe isn't open */
-    if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    transaction = usb->transaction + submit_handle;
-
-    /* Fail if this transaction already completed */
-    if (cvmx_unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* If the transaction is the HEAD of the queue and scheduled. We need to
-        treat it special */
-    if ((pipe->head == transaction) &&
-        (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
-        cvmx_usbcx_hccharx_t usbc_hcchar;
-
-        usb->pipe_for_channel[pipe->channel] = NULL;
-        pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-        CVMX_SYNCW;
-
-        usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
-        /* If the channel isn't enabled then the transaction already completed */
-        if (usbc_hcchar.s.chena) {
-            usbc_hcchar.s.chdis = 1;
-            __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
-        }
-    }
-    __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL);
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Cancel all outstanding requests in a pipe. Logically all this
- * does is call cvmx_usb_cancel() in a loop.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle)
-{
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Fail if the pipe isn't open */
-    if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Simply loop through and attempt to cancel each transaction */
-    while (pipe->head) {
-        cvmx_usb_status_t result = cvmx_usb_cancel(state, pipe_handle,
-            __cvmx_usb_get_submit_handle(usb, pipe->head));
-        if (cvmx_unlikely(result != CVMX_USB_SUCCESS))
-            CVMX_USB_RETURN(result);
-    }
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Close a pipe created with cvmx_usb_open_pipe().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to close.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
- *         pipe has outstanding transfers.
- */
-cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state, int pipe_handle)
-{
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", pipe_handle);
-    if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Fail if the pipe isn't open */
-    if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    /* Fail if the pipe has pending transactions */
-    if (cvmx_unlikely(pipe->head))
-        CVMX_USB_RETURN(CVMX_USB_BUSY);
-
-    pipe->flags = 0;
-    __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
-    __cvmx_usb_append_pipe(&usb->free_pipes, pipe);
-
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Register a function to be called when various USB events occur.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param reason    Which event to register for.
- * @param callback  Function to call when the event occurs.
- * @param user_data User data parameter to the function.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
-                                             cvmx_usb_callback_t reason,
-                                             cvmx_usb_callback_func_t callback,
-                                             void *user_data)
-{
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-    CVMX_USB_LOG_PARAM("%d", reason);
-    CVMX_USB_LOG_PARAM("%p", callback);
-    CVMX_USB_LOG_PARAM("%p", user_data);
-    if (cvmx_unlikely(reason >= __CVMX_USB_CALLBACK_END))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-    if (cvmx_unlikely(!callback))
-        CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
-
-    usb->callback[reason] = callback;
-    usb->callback_data[reason] = user_data;
-
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
-
-
-/**
- * Get the current USB protocol level frame number. The frame
- * number is always in the range of 0-0x7ff.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return USB frame number
- */
-int cvmx_usb_get_frame_number(cvmx_usb_state_t *state)
-{
-    int frame_number;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-    cvmx_usbcx_hfnum_t usbc_hfnum;
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-    frame_number = usbc_hfnum.s.frnum;
-
-    CVMX_USB_RETURN(frame_number);
-}
-
-
-/**
- * @INTERNAL
- * Poll a channel for status
- *
- * @param usb     USB device
- * @param channel Channel to poll
- *
- * @return Zero on success
- */
-static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel)
-{
-    cvmx_usbcx_hcintx_t usbc_hcint;
-    cvmx_usbcx_hctsizx_t usbc_hctsiz;
-    cvmx_usbcx_hccharx_t usbc_hcchar;
-    cvmx_usb_pipe_t *pipe;
-    cvmx_usb_transaction_t *transaction;
-    int bytes_this_transfer;
-    int bytes_in_last_packet;
-    int packets_processed;
-    int buffer_space_left;
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", usb);
-    CVMX_USB_LOG_PARAM("%d", channel);
-
-    /* Read the interrupt status bits for the channel */
-    usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
-
-    if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-        usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-
-        if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
-            /* There seems to be a bug in CN31XX which can cause interrupt
-                IN transfers to get stuck until we do a write of HCCHARX
-                without changing things */
-            __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-            CVMX_USB_RETURN(0);
-        }
-
-        /* In non DMA mode the channels don't halt themselves. We need to
-            manually disable channels that are left running */
-        if (!usbc_hcint.s.chhltd) {
-            if (usbc_hcchar.s.chena) {
-                cvmx_usbcx_hcintmskx_t hcintmsk;
-                /* Disable all interrupts except CHHLTD */
-                hcintmsk.u32 = 0;
-                hcintmsk.s.chhltdmsk = 1;
-                __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32);
-                usbc_hcchar.s.chdis = 1;
-                __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
-                CVMX_USB_RETURN(0);
-            }
-            else if (usbc_hcint.s.xfercompl) {
-                /* Successful IN/OUT with transfer complete. Channel halt isn't needed */
-            }
-            else {
-                cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
-                CVMX_USB_RETURN(0);
-            }
-        }
-    }
-    else {
-        /* There is are no interrupts that we need to process when the channel is
-            still running */
-        if (!usbc_hcint.s.chhltd)
-            CVMX_USB_RETURN(0);
-    }
-
-    /* Disable the channel interrupts now that it is done */
-    __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
-    usb->idle_hardware_channels |= (1<<channel);
-
-    /* Make sure this channel is tied to a valid pipe */
-    pipe = usb->pipe_for_channel[channel];
-    CVMX_PREFETCH(pipe, 0);
-    CVMX_PREFETCH(pipe, 128);
-    if (!pipe)
-        CVMX_USB_RETURN(0);
-    transaction = pipe->head;
-    CVMX_PREFETCH0(transaction);
-
-    /* Disconnect this pipe from the HW channel. Later the schedule function will
-        figure out which pipe needs to go */
-    usb->pipe_for_channel[channel] = NULL;
-    pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-    /* Read the channel config info so we can figure out how much data
-        transfered */
-    usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
-    usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-    /* Calculating the number of bytes successfully transferred is dependent on
-        the transfer direction */
-    packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
-    if (usbc_hcchar.s.epdir) {
-        /* IN transactions are easy. For every byte received the hardware
-            decrements xfersize. All we need to do is subtract the current
-            value of xfersize from its starting value and we know how many
-            bytes were written to the buffer */
-        bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize;
-    }
-    else {
-        /* OUT transaction don't decrement xfersize. Instead pktcnt is
-            decremented on every successful packet send. The hardware does
-            this when it receives an ACK, or NYET. If it doesn't
-            receive one of these responses pktcnt doesn't change */
-        bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
-        /* The last packet may not be a full transfer if we didn't have
-            enough data */
-        if (bytes_this_transfer > transaction->xfersize)
-            bytes_this_transfer = transaction->xfersize;
-    }
-    /* Figure out how many bytes were in the last packet of the transfer */
-    if (packets_processed)
-        bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps;
-    else
-        bytes_in_last_packet = bytes_this_transfer;
-
-    /* As a special case, setup transactions output the setup header, not
-        the user's data. For this reason we don't count setup data as bytes
-        transferred */
-    if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
-        (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
-        bytes_this_transfer = 0;
-
-    /* Optional debug output */
-    if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
-        (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
-        cvmx_dprintf("%s: Channel %d halted. Pipe %d transaction %d stage %d bytes=%d\n",
-                     __FUNCTION__, channel,
-                     __cvmx_usb_get_pipe_handle(usb, pipe),
-                     __cvmx_usb_get_submit_handle(usb, transaction),
-                     transaction->stage, bytes_this_transfer);
-
-    /* Add the bytes transferred to the running total. It is important that
-        bytes_this_transfer doesn't count any data that needs to be
-        retransmitted */
-    transaction->actual_bytes += bytes_this_transfer;
-    if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-        buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes;
-    else
-        buffer_space_left = transaction->buffer_length - transaction->actual_bytes;
-
-    /* We need to remember the PID toggle state for the next transaction. The
-        hardware already updated it for the next transaction */
-    pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
-
-    /* For high speed bulk out, assume the next transaction will need to do a
-        ping before proceeding. If this isn't true the ACK processing below
-        will clear this flag */
-    if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-        (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
-        (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
-        pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-    if (usbc_hcint.s.stall) {
-        /* STALL as a response means this transaction cannot be completed
-            because the device can't process transactions. Tell the user. Any
-            data that was transferred will be counted on the actual bytes
-            transferred */
-        pipe->pid_toggle = 0;
-        __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL);
-    }
-    else if (usbc_hcint.s.xacterr) {
-        /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */
-        if (usbc_hcint.s.nak || usbc_hcint.s.ack)
-            transaction->retries = 0;
-        transaction->retries++;
-        if (transaction->retries > MAX_RETRIES) {
-            /* XactErr as a response means the device signaled something wrong with
-                the transfer. For example, PID toggle errors cause these */
-            __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR);
-        }
-        else {
-            /* If this was a split then clear our split in progress marker */
-            if (usb->active_split == transaction)
-                usb->active_split = NULL;
-            /* Rewind to the beginning of the transaction by anding off the
-                split complete bit */
-            transaction->stage &= ~1;
-            pipe->split_sc_frame = -1;
-            pipe->next_tx_frame += pipe->interval;
-            if (pipe->next_tx_frame < usb->frame_number)
-                pipe->next_tx_frame = usb->frame_number + pipe->interval -
-                    (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-        }
-    }
-    else if (usbc_hcint.s.bblerr)
-    {
-        /* Babble Error (BblErr) */
-        __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR);
-    }
-    else if (usbc_hcint.s.datatglerr)
-    {
-        /* We'll retry the exact same transaction again */
-        transaction->retries++;
-    }
-    else if (usbc_hcint.s.nyet) {
-        /* NYET as a response is only allowed in three cases: as a response to
-            a ping, as a response to a split transaction, and as a response to
-            a bulk out. The ping case is handled by hardware, so we only have
-            splits and bulk out */
-        if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
-            transaction->retries = 0;
-            /* If there is more data to go then we need to try again. Otherwise
-                this transaction is complete */
-            if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
-                __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-        }
-        else {
-            /* Split transactions retry the split complete 4 times then rewind
-                to the start split and do the entire transactions again */
-            transaction->retries++;
-            if ((transaction->retries & 0x3) == 0) {
-                /* Rewind to the beginning of the transaction by anding off the
-                    split complete bit */
-                transaction->stage &= ~1;
-                pipe->split_sc_frame = -1;
-            }
-        }
-    }
-    else if (usbc_hcint.s.ack) {
-        transaction->retries = 0;
-        /* The ACK bit can only be checked after the other error bits. This is
-            because a multi packet transfer may succeed in a number of packets
-            and then get a different response on the last packet. In this case
-            both ACK and the last response bit will be set. If none of the
-            other response bits is set, then the last packet must have been an
-            ACK */
-
-        /* Since we got an ACK, we know we don't need to do a ping on this
-            pipe */
-        pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-        switch (transaction->type)
-        {
-            case CVMX_USB_TRANSFER_CONTROL:
-                switch (transaction->stage)
-                {
-                    case CVMX_USB_STAGE_NON_CONTROL:
-                    case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-                        /* This should be impossible */
-                        __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
-                        break;
-                    case CVMX_USB_STAGE_SETUP:
-                        pipe->pid_toggle = 1;
-                        if (__cvmx_usb_pipe_needs_split(usb, pipe))
-                            transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
-                        else {
-                            cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
-                            if (header->s.length)
-                                transaction->stage = CVMX_USB_STAGE_DATA;
-                            else
-                                transaction->stage = CVMX_USB_STAGE_STATUS;
-                        }
-                        break;
-                    case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-                        {
-                            cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
-                            if (header->s.length)
-                                transaction->stage = CVMX_USB_STAGE_DATA;
-                            else
-                                transaction->stage = CVMX_USB_STAGE_STATUS;
-                        }
-                        break;
-                    case CVMX_USB_STAGE_DATA:
-                        if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                            transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
-                            /* For setup OUT data that are splits, the hardware
-                                doesn't appear to count transferred data. Here
-                                we manually update the data transferred */
-                            if (!usbc_hcchar.s.epdir) {
-                                if (buffer_space_left < pipe->max_packet)
-                                    transaction->actual_bytes += buffer_space_left;
-                                else
-                                    transaction->actual_bytes += pipe->max_packet;
-                            }
-                        }
-                        else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-                            pipe->pid_toggle = 1;
-                            transaction->stage = CVMX_USB_STAGE_STATUS;
-                        }
-                        break;
-                    case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-                        if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-                            pipe->pid_toggle = 1;
-                            transaction->stage = CVMX_USB_STAGE_STATUS;
-                        }
-                        else {
-                            transaction->stage = CVMX_USB_STAGE_DATA;
-                        }
-                        break;
-                    case CVMX_USB_STAGE_STATUS:
-                        if (__cvmx_usb_pipe_needs_split(usb, pipe))
-                            transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
-                        else
-                            __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                        break;
-                    case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-                        __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                        break;
-                }
-                break;
-            case CVMX_USB_TRANSFER_BULK:
-            case CVMX_USB_TRANSFER_INTERRUPT:
-                /* The only time a bulk transfer isn't complete when
-                    it finishes with an ACK is during a split transaction. For
-                    splits we need to continue the transfer if more data is
-                    needed */
-                if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                    if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
-                        transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-                    else {
-                        if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet))
-                            transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-                        else {
-                            if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
-                                pipe->next_tx_frame += pipe->interval;
-                            __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                        }
-                    }
-                }
-                else {
-                    if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-                        (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
-                        (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-                        (usbc_hcint.s.nak))
-                        pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
-                    if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) {
-                        if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
-                            pipe->next_tx_frame += pipe->interval;
-                        __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                    }
-                }
-                break;
-            case CVMX_USB_TRANSFER_ISOCHRONOUS:
-                if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
-                    /* ISOCHRONOUS OUT splits don't require a complete split stage.
-                        Instead they use a sequence of begin OUT splits to transfer
-                        the data 188 bytes at a time. Once the transfer is complete,
-                        the pipe sleeps until the next schedule interval */
-                    if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-                        /* If no space left or this wasn't a max size packet then
-                            this transfer is complete. Otherwise start it again
-                            to send the next 188 bytes */
-                        if (!buffer_space_left || (bytes_this_transfer < 188)) {
-                            pipe->next_tx_frame += pipe->interval;
-                            __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                        }
-                    }
-                    else {
-                        if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
-                            /* We are in the incoming data phase. Keep getting
-                                data until we run out of space or get a small
-                                packet */
-                            if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
-                                pipe->next_tx_frame += pipe->interval;
-                                __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                            }
-                        }
-                        else
-                            transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-                    }
-                }
-                else {
-                    pipe->next_tx_frame += pipe->interval;
-                    __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
-                }
-                break;
-        }
-    }
-    else if (usbc_hcint.s.nak) {
-        /* If this was a split then clear our split in progress marker */
-        if (usb->active_split == transaction)
-            usb->active_split = NULL;
-        /* NAK as a response means the device couldn't accept the transaction,
-            but it should be retried in the future. Rewind to the beginning of
-            the transaction by anding off the split complete bit. Retry in the
-            next interval */
-        transaction->retries = 0;
-        transaction->stage &= ~1;
-        pipe->next_tx_frame += pipe->interval;
-        if (pipe->next_tx_frame < usb->frame_number)
-            pipe->next_tx_frame = usb->frame_number + pipe->interval -
-                (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
-    }
-    else {
-        cvmx_usb_port_status_t port;
-        port = cvmx_usb_get_status((cvmx_usb_state_t *)usb);
-        if (port.port_enabled)
-        {
-            /* We'll retry the exact same transaction again */
-            transaction->retries++;
-        }
-        else
-        {
-            /* We get channel halted interrupts with no result bits sets when the
-                cable is unplugged */
-            __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
-        }
-    }
-    CVMX_USB_RETURN(0);
-}
-
-
-/**
- * Poll the USB block for status and call all needed callback
- * handlers. This function is meant to be called in the interrupt
- * handler for the USB controller. It can also be called
- * periodically in a loop for non-interrupt based operation.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state)
-{
-    cvmx_usbcx_hfnum_t usbc_hfnum;
-    cvmx_usbcx_gintsts_t usbc_gintsts;
-    cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
-
-    CVMX_PREFETCH(usb, 0);
-    CVMX_PREFETCH(usb, 1*128);
-    CVMX_PREFETCH(usb, 2*128);
-    CVMX_PREFETCH(usb, 3*128);
-    CVMX_PREFETCH(usb, 4*128);
-
-    CVMX_USB_LOG_CALLED();
-    CVMX_USB_LOG_PARAM("%p", state);
-
-    /* Update the frame counter */
-    usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-    if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum)
-        usb->frame_number += 0x4000;
-    usb->frame_number &= ~0x3fffull;
-    usb->frame_number |= usbc_hfnum.s.frnum;
-
-    /* Read the pending interrupts */
-    usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index));
-
-    /* Clear the interrupts now that we know about them */
-    __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32);
-
-    if (usbc_gintsts.s.rxflvl) {
-        /* RxFIFO Non-Empty (RxFLvl)
-            Indicates that there is at least one packet pending to be read
-            from the RxFIFO. */
-        /* In DMA mode this is handled by hardware */
-        if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-            __cvmx_usb_poll_rx_fifo(usb);
-    }
-    if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
-        /* Fill the Tx FIFOs when not in DMA mode */
-        if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-            __cvmx_usb_poll_tx_fifo(usb);
-    }
-    if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
-        cvmx_usbcx_hprt_t usbc_hprt;
-        /* Disconnect Detected Interrupt (DisconnInt)
-            Asserted when a device disconnect is detected. */
-
-        /* Host Port Interrupt (PrtInt)
-            The core sets this bit to indicate a change in port status of one
-            of the O2P USB core ports in Host mode. The application must
-            read the Host Port Control and Status (HPRT) register to
-            determine the exact event that caused this interrupt. The
-            application must clear the appropriate status bit in the Host Port
-            Control and Status register to clear this bit. */
-
-        /* Call the user's port callback */
-        __cvmx_usb_perform_callback(usb, NULL, NULL,
-                                    CVMX_USB_CALLBACK_PORT_CHANGED,
-                                    CVMX_USB_COMPLETE_SUCCESS);
-        /* Clear the port change bits */
-        usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-        usbc_hprt.s.prtena = 0;
-        __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32);
-    }
-    if (usbc_gintsts.s.hchint) {
-        /* Host Channels Interrupt (HChInt)
-            The core sets this bit to indicate that an interrupt is pending on
-            one of the channels of the core (in Host mode). The application
-            must read the Host All Channels Interrupt (HAINT) register to
-            determine the exact number of the channel on which the
-            interrupt occurred, and then read the corresponding Host
-            Channel-n Interrupt (HCINTn) register to determine the exact
-            cause of the interrupt. The application must clear the
-            appropriate status bit in the HCINTn register to clear this bit. */
-        cvmx_usbcx_haint_t usbc_haint;
-        usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index));
-        while (usbc_haint.u32) {
-            int channel;
-            CVMX_CLZ(channel, usbc_haint.u32);
-            channel = 31 - channel;
-            __cvmx_usb_poll_channel(usb, channel);
-            usbc_haint.u32 ^= 1<<channel;
-        }
-    }
-
-    __cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
-
-    CVMX_USB_RETURN(CVMX_USB_SUCCESS);
-}
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.h b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.h
deleted file mode 100644
index db9cc05e5d..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usb.h
+++ /dev/null
@@ -1,1085 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export  control
- * laws, including the U.S. Export Administration Act and its  associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
- * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * @file
- *
- * "cvmx-usb.h" defines a set of low level USB functions to help
- * developers create Octeon USB drivers for various operating
- * systems. These functions provide a generic API to the Octeon
- * USB blocks, hiding the internal hardware specific
- * operations.
- *
- * At a high level the device driver needs to:
- *
- * -# Call cvmx_usb_get_num_ports() to get the number of
- *  supported ports.
- * -# Call cvmx_usb_initialize() for each Octeon USB port.
- * -# Enable the port using cvmx_usb_enable().
- * -# Either periodically, or in an interrupt handler, call
- *  cvmx_usb_poll() to service USB events.
- * -# Manage pipes using cvmx_usb_open_pipe() and
- *  cvmx_usb_close_pipe().
- * -# Manage transfers using cvmx_usb_submit_*() and
- *  cvmx_usb_cancel*().
- * -# Shutdown USB on unload using cvmx_usb_shutdown().
- *
- * To monitor USB status changes, the device driver must use
- * cvmx_usb_register_callback() to register for events that it
- * is interested in. Below are a few hints on successfully
- * implementing a driver on top of this API.
- *
- * <h2>Initialization</h2>
- *
- * When a driver is first loaded, it is normally not necessary
- * to bring up the USB port completely. Most operating systems
- * expect to initialize and enable the port in two independent
- * steps. Normally an operating system will probe hardware,
- * initialize anything found, and then enable the hardware.
- *
- * In the probe phase you should:
- * -# Use cvmx_usb_get_num_ports() to determine the number of
- *  USB port to be supported.
- * -# Allocate space for a cvmx_usb_state_t structure for each
- *  port.
- * -# Tell the operating system about each port
- *
- * In the initialization phase you should:
- * -# Use cvmx_usb_initialize() on each port.
- * -# Do not call cvmx_usb_enable(). This leaves the USB port in
- *  the disabled state until the operating system is ready.
- *
- * Finally, in the enable phase you should:
- * -# Call cvmx_usb_enable() on the appropriate port.
- * -# Note that some operating system use a RESET instead of an
- *  enable call. To implement RESET, you should call
- *  cvmx_usb_disable() followed by cvmx_usb_enable().
- *
- * <h2>Locking</h2>
- *
- * All of the functions in the cvmx-usb API assume exclusive
- * access to the USB hardware and internal data structures. This
- * means that the driver must provide locking as necessary.
- *
- * In the single CPU state it is normally enough to disable
- * interrupts before every call to cvmx_usb*() and enable them
- * again after the call is complete. Keep in mind that it is
- * very common for the callback handlers to make additional
- * calls into cvmx-usb, so the disable/enable must be protected
- * against recursion. As an example, the Linux kernel
- * local_irq_save() and local_irq_restore() are perfect for this
- * in the non SMP case.
- *
- * In the SMP case, locking is more complicated. For SMP you not
- * only need to disable interrupts on the local core, but also
- * take a lock to make sure that another core cannot call
- * cvmx-usb.
- *
- * <h2>Port callback</h2>
- *
- * The port callback prototype needs to look as follows:
- *
- * void port_callback(cvmx_usb_state_t *usb,
- *                    cvmx_usb_callback_t reason,
- *                    cvmx_usb_complete_t status,
- *                    int pipe_handle,
- *                    int submit_handle,
- *                    int bytes_transferred,
- *                    void *user_data);
- * - @b usb is the cvmx_usb_state_t for the port.
- * - @b reason will always be
- *   CVMX_USB_CALLBACK_PORT_CHANGED.
- * - @b status will always be CVMX_USB_COMPLETE_SUCCESS.
- * - @b pipe_handle will always be -1.
- * - @b submit_handle will always be -1.
- * - @b bytes_transferred will always be 0.
- * - @b user_data is the void pointer originally passed along
- *   with the callback. Use this for any state information you
- *   need.
- *
- * The port callback will be called whenever the user plugs /
- * unplugs a device from the port. It will not be called when a
- * device is plugged / unplugged from a hub connected to the
- * root port. Normally all the callback needs to do is tell the
- * operating system to poll the root hub for status. Under
- * Linux, this is performed by calling usb_hcd_poll_rh_status().
- * In the Linux driver we use @b user_data. to pass around the
- * Linux "hcd" structure. Once the port callback completes,
- * Linux automatically calls octeon_usb_hub_status_data() which
- * uses cvmx_usb_get_status() to determine the root port status.
- *
- * <h2>Complete callback</h2>
- *
- * The completion callback prototype needs to look as follows:
- *
- * void complete_callback(cvmx_usb_state_t *usb,
- *                        cvmx_usb_callback_t reason,
- *                        cvmx_usb_complete_t status,
- *                        int pipe_handle,
- *                        int submit_handle,
- *                        int bytes_transferred,
- *                        void *user_data);
- * - @b usb is the cvmx_usb_state_t for the port.
- * - @b reason will always be
- *   CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
- * - @b status will be one of the cvmx_usb_complete_t
- *   enumerations.
- * - @b pipe_handle is the handle to the pipe the transaction
- *   was originally submitted on.
- * - @b submit_handle is the handle returned by the original
- *   cvmx_usb_submit_* call.
- * - @b bytes_transferred is the number of bytes successfully
- *   transferred in the transaction. This will be zero on most
- *   error conditions.
- * - @b user_data is the void pointer originally passed along
- *   with the callback. Use this for any state information you
- *   need. For example, the Linux "urb" is stored in here in the
- *   Linux driver.
- *
- * In general your callback handler should use @b status and @b
- * bytes_transferred to tell the operating system the how the
- * transaction completed. Normally the pipe is not changed in
- * this callback.
- *
- * <h2>Canceling transactions</h2>
- *
- * When a transaction is cancelled using cvmx_usb_cancel*(), the
- * actual length of time until the complete callback is called
- * can vary greatly. It may be called before cvmx_usb_cancel*()
- * returns, or it may be called a number of usb frames in the
- * future once the hardware frees the transaction. In either of
- * these cases, the complete handler will receive
- * CVMX_USB_COMPLETE_CANCEL.
- *
- * <h2>Handling pipes</h2>
- *
- * USB "pipes" is a software construct created by this API to
- * enable the ordering of usb transactions to a device endpoint.
- * Octeon's underlying hardware doesn't have any concept
- * equivalent to "pipes". The hardware instead has eight
- * channels that can be used simultaneously to have up to eight
- * transaction in process at the same time. In order to maintain
- * ordering in a pipe, the transactions for a pipe will only be
- * active in one hardware channel at a time. From an API user's
- * perspective, this doesn't matter but it can be helpful to
- * keep this in mind when you are probing hardware while
- * debugging.
- *
- * Also keep in mind that usb transactions contain state
- * information about the previous transaction to the same
- * endpoint. Each transaction has a PID toggle that changes 0/1
- * between each sub packet. This is maintained in the pipe data
- * structures. For this reason, you generally cannot create and
- * destroy a pipe for every transaction. A sequence of
- * transaction to the same endpoint must use the same pipe.
- *
- * <h2>Root Hub</h2>
- *
- * Some operating systems view the usb root port as a normal usb
- * hub. These systems attempt to control the root hub with
- * messages similar to the usb 2.0 spec for hub control and
- * status. For these systems it may be necessary to write
- * function to decode standard usb control messages into
- * equivalent cvmx-usb API calls. As an example, the following
- * code is used under Linux for some of the basic hub control
- * messages.
- *
- * @code
- * static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
- * {
- *     cvmx_usb_state_t *usb = (cvmx_usb_state_t *)hcd->hcd_priv;
- *     cvmx_usb_port_status_t usb_port_status;
- *     int port_status;
- *     struct usb_hub_descriptor *desc;
- *     unsigned long flags;
- *
- *     switch (typeReq)
- *     {
- *         case ClearHubFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
- *             switch (wValue)
- *             {
- *                 case C_HUB_LOCAL_POWER:
- *                 case C_HUB_OVER_CURRENT:
- *                     // Nothing required here
- *                     break;
- *                 default:
- *                     return -EINVAL;
- *             }
- *             break;
- *         case ClearPortFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             switch (wValue)
- *             {
- *                 case USB_PORT_FEAT_ENABLE:
- *                     DEBUG_ROOT_HUB(" ENABLE");
- *                     local_irq_save(flags);
- *                     cvmx_usb_disable(usb);
- *                     local_irq_restore(flags);
- *                     break;
- *                 case USB_PORT_FEAT_SUSPEND:
- *                     DEBUG_ROOT_HUB(" SUSPEND");
- *                     // Not supported on Octeon
- *                     break;
- *                 case USB_PORT_FEAT_POWER:
- *                     DEBUG_ROOT_HUB(" POWER");
- *                     // Not supported on Octeon
- *                     break;
- *                 case USB_PORT_FEAT_INDICATOR:
- *                     DEBUG_ROOT_HUB(" INDICATOR");
- *                     // Port inidicator not supported
- *                     break;
- *                 case USB_PORT_FEAT_C_CONNECTION:
- *                     DEBUG_ROOT_HUB(" C_CONNECTION");
- *                     // Clears drivers internal connect status change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_RESET:
- *                     DEBUG_ROOT_HUB(" C_RESET");
- *                     // Clears the driver's internal Port Reset Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_ENABLE:
- *                     DEBUG_ROOT_HUB(" C_ENABLE");
- *                     // Clears the driver's internal Port Enable/Disable Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 case USB_PORT_FEAT_C_SUSPEND:
- *                     DEBUG_ROOT_HUB(" C_SUSPEND");
- *                     // Clears the driver's internal Port Suspend Change flag,
- *                         which is set when resume signaling on the host port is
- *                         complete
- *                     break;
- *                 case USB_PORT_FEAT_C_OVER_CURRENT:
- *                     DEBUG_ROOT_HUB(" C_OVER_CURRENT");
- *                     // Clears the driver's overcurrent Change flag
- *                     cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
- *                     break;
- *                 default:
- *                     DEBUG_ROOT_HUB(" UNKNOWN\n");
- *                     return -EINVAL;
- *             }
- *             DEBUG_ROOT_HUB("\n");
- *             break;
- *         case GetHubDescriptor:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
- *             desc = (struct usb_hub_descriptor *)buf;
- *             desc->bDescLength = 9;
- *             desc->bDescriptorType = 0x29;
- *             desc->bNbrPorts = 1;
- *             desc->wHubCharacteristics = 0x08;
- *             desc->bPwrOn2PwrGood = 1;
- *             desc->bHubContrCurrent = 0;
- *             desc->bitmap[0] = 0;
- *             desc->bitmap[1] = 0xff;
- *             break;
- *         case GetHubStatus:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
- *             *(__le32 *)buf = 0;
- *             break;
- *         case GetPortStatus:
- *             DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             usb_port_status = cvmx_usb_get_status(usb);
- *             port_status = 0;
- *
- *             if (usb_port_status.connect_change)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
- *                 DEBUG_ROOT_HUB(" C_CONNECTION");
- *             }
- *
- *             if (usb_port_status.port_enabled)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
- *                 DEBUG_ROOT_HUB(" C_ENABLE");
- *             }
- *
- *             if (usb_port_status.connected)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_CONNECTION);
- *                 DEBUG_ROOT_HUB(" CONNECTION");
- *             }
- *
- *             if (usb_port_status.port_enabled)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_ENABLE);
- *                 DEBUG_ROOT_HUB(" ENABLE");
- *             }
- *
- *             if (usb_port_status.port_over_current)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
- *                 DEBUG_ROOT_HUB(" OVER_CURRENT");
- *             }
- *
- *             if (usb_port_status.port_powered)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_POWER);
- *                 DEBUG_ROOT_HUB(" POWER");
- *             }
- *
- *             if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
- *                 DEBUG_ROOT_HUB(" HIGHSPEED");
- *             }
- *             else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
- *             {
- *                 port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
- *                 DEBUG_ROOT_HUB(" LOWSPEED");
- *             }
- *
- *             *((__le32 *)buf) = cpu_to_le32(port_status);
- *             DEBUG_ROOT_HUB("\n");
- *             break;
- *         case SetHubFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
- *             // No HUB features supported
- *             break;
- *         case SetPortFeature:
- *             DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
- *             if (wIndex != 1)
- *             {
- *                 DEBUG_ROOT_HUB(" INVALID\n");
- *                 return -EINVAL;
- *             }
- *
- *             switch (wValue)
- *             {
- *                 case USB_PORT_FEAT_SUSPEND:
- *                     DEBUG_ROOT_HUB(" SUSPEND\n");
- *                     return -EINVAL;
- *                 case USB_PORT_FEAT_POWER:
- *                     DEBUG_ROOT_HUB(" POWER\n");
- *                     return -EINVAL;
- *                 case USB_PORT_FEAT_RESET:
- *                     DEBUG_ROOT_HUB(" RESET\n");
- *                     local_irq_save(flags);
- *                     cvmx_usb_disable(usb);
- *                     if (cvmx_usb_enable(usb))
- *                         DEBUG_ERROR("Failed to enable the port\n");
- *                     local_irq_restore(flags);
- *                     return 0;
- *                 case USB_PORT_FEAT_INDICATOR:
- *                     DEBUG_ROOT_HUB(" INDICATOR\n");
- *                     // Not supported
- *                     break;
- *                 default:
- *                     DEBUG_ROOT_HUB(" UNKNOWN\n");
- *                     return -EINVAL;
- *             }
- *             break;
- *         default:
- *             DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
- *             return -EINVAL;
- *     }
- *     return 0;
- * }
- * @endcode
- *
- * <h2>Interrupts</h2>
- *
- * If you plan on using usb interrupts, cvmx_usb_poll() must be
- * called on every usb interrupt. It will read the usb state,
- * call any needed callbacks, and schedule transactions as
- * needed. Your device driver needs only to hookup an interrupt
- * handler and call cvmx_usb_poll(). Octeon's usb port 0 causes
- * CIU bit CIU_INT*_SUM0[USB] to be set (bit 56). For port 1,
- * CIU bit CIU_INT_SUM1[USB1] is set (bit 17). How these bits
- * are turned into interrupt numbers is operating system
- * specific. For Linux, there are the convenient defines
- * OCTEON_IRQ_USB0 and OCTEON_IRQ_USB1 for the IRQ numbers.
- *
- * If you aren't using interrupts, simple call cvmx_usb_poll()
- * in your main processing loop.
- *
- * <hr>$Revision: 32636 $<hr>
- */
-
-#ifndef __CVMX_USB_H__
-#define __CVMX_USB_H__
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/**
- * Enumerations representing the status of function calls.
- */
-typedef enum
-{
-    CVMX_USB_SUCCESS = 0,           /**< There were no errors */
-    CVMX_USB_INVALID_PARAM = -1,    /**< A parameter to the function was invalid */
-    CVMX_USB_NO_MEMORY = -2,        /**< Insufficient resources were available for the request */
-    CVMX_USB_BUSY = -3,             /**< The resource is busy and cannot service the request */
-    CVMX_USB_TIMEOUT = -4,          /**< Waiting for an action timed out */
-    CVMX_USB_INCORRECT_MODE = -5,   /**< The function call doesn't work in the current USB
-                                         mode. This happens when host only functions are
-                                         called in device mode or vice versa */
-} cvmx_usb_status_t;
-
-/**
- * Enumerations representing the possible USB device speeds
- */
-typedef enum
-{
-    CVMX_USB_SPEED_HIGH = 0,        /**< Device is operation at 480Mbps */
-    CVMX_USB_SPEED_FULL = 1,        /**< Device is operation at 12Mbps */
-    CVMX_USB_SPEED_LOW = 2,         /**< Device is operation at 1.5Mbps */
-} cvmx_usb_speed_t;
-
-/**
- * Enumeration representing the possible USB transfer types.
- */
-typedef enum
-{
-    CVMX_USB_TRANSFER_CONTROL = 0,      /**< USB transfer type control for hub and status transfers */
-    CVMX_USB_TRANSFER_ISOCHRONOUS = 1,  /**< USB transfer type isochronous for low priority periodic transfers */
-    CVMX_USB_TRANSFER_BULK = 2,         /**< USB transfer type bulk for large low priority transfers */
-    CVMX_USB_TRANSFER_INTERRUPT = 3,    /**< USB transfer type interrupt for high priority periodic transfers */
-} cvmx_usb_transfer_t;
-
-/**
- * Enumeration of the transfer directions
- */
-typedef enum
-{
-    CVMX_USB_DIRECTION_OUT,         /**< Data is transferring from Octeon to the device/host */
-    CVMX_USB_DIRECTION_IN,          /**< Data is transferring from the device/host to Octeon */
-} cvmx_usb_direction_t;
-
-/**
- * Enumeration of all possible status codes passed to callback
- * functions.
- */
-typedef enum
-{
-    CVMX_USB_COMPLETE_SUCCESS,      /**< The transaction / operation finished without any errors */
-    CVMX_USB_COMPLETE_SHORT,        /**< FIXME: This is currently not implemented */
-    CVMX_USB_COMPLETE_CANCEL,       /**< The transaction was canceled while in flight by a user call to cvmx_usb_cancel* */
-    CVMX_USB_COMPLETE_ERROR,        /**< The transaction aborted with an unexpected error status */
-    CVMX_USB_COMPLETE_STALL,        /**< The transaction received a USB STALL response from the device */
-    CVMX_USB_COMPLETE_XACTERR,      /**< The transaction failed with an error from the device even after a number of retries */
-    CVMX_USB_COMPLETE_DATATGLERR,   /**< The transaction failed with a data toggle error even after a number of retries */
-    CVMX_USB_COMPLETE_BABBLEERR,    /**< The transaction failed with a babble error */
-    CVMX_USB_COMPLETE_FRAMEERR,     /**< The transaction failed with a frame error even after a number of retries */
-} cvmx_usb_complete_t;
-
-/**
- * Structure returned containing the USB port status information.
- */
-typedef struct
-{
-    uint32_t reserved           : 25;
-    uint32_t port_enabled       : 1; /**< 1 = Usb port is enabled, 0 = disabled */
-    uint32_t port_over_current  : 1; /**< 1 = Over current detected, 0 = Over current not detected. Octeon doesn't support over current detection */
-    uint32_t port_powered       : 1; /**< 1 = Port power is being supplied to the device, 0 = power is off. Octeon doesn't support turning port power off */
-    cvmx_usb_speed_t port_speed : 2; /**< Current port speed */
-    uint32_t connected          : 1; /**< 1 = A device is connected to the port, 0 = No device is connected */
-    uint32_t connect_change     : 1; /**< 1 = Device connected state changed since the last set status call */
-} cvmx_usb_port_status_t;
-
-/**
- * This is the structure of a Control packet header
- */
-typedef union
-{
-    uint64_t u64;
-    struct
-    {
-        uint64_t request_type   : 8;  /**< Bit 7 tells the direction: 1=IN, 0=OUT */
-        uint64_t request        : 8;  /**< The standard usb request to make */
-        uint64_t value          : 16; /**< Value parameter for the request in little endian format */
-        uint64_t index          : 16; /**< Index for the request in little endian format */
-        uint64_t length         : 16; /**< Length of the data associated with this request in little endian format */
-    } s;
-} cvmx_usb_control_header_t;
-
-/**
- * Descriptor for Isochronous packets
- */
-typedef struct
-{
-    int offset;                     /**< This is the offset in bytes into the main buffer where this data is stored */
-    int length;                     /**< This is the length in bytes of the data */
-    cvmx_usb_complete_t status;     /**< This is the status of this individual packet transfer */
-} cvmx_usb_iso_packet_t;
-
-/**
- * Possible callback reasons for the USB API.
- */
-typedef enum
-{
-    CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
-                                    /**< A callback of this type is called when a submitted transfer
-                                        completes. The completion callback will be called even if the
-                                        transfer fails or is canceled. The status parameter will
-                                        contain details of why he callback was called. */
-    CVMX_USB_CALLBACK_PORT_CHANGED, /**< The status of the port changed. For example, someone may have
-                                        plugged a device in. The status parameter contains
-                                        CVMX_USB_COMPLETE_SUCCESS. Use cvmx_usb_get_status() to get
-                                        the new port status. */
-    __CVMX_USB_CALLBACK_END         /**< Do not use. Used internally for array bounds */
-} cvmx_usb_callback_t;
-
-/**
- * USB state internal data. The contents of this structure
- * may change in future SDKs. No data in it should be referenced
- * by user's of this API.
- */
-typedef struct
-{
-    char data[65536];
-} cvmx_usb_state_t;
-
-/**
- * USB callback functions are always of the following type.
- * The parameters are as follows:
- *      - state = USB device state populated by
- *        cvmx_usb_initialize().
- *      - reason = The cvmx_usb_callback_t used to register
- *        the callback.
- *      - status = The cvmx_usb_complete_t representing the
- *        status code of a transaction.
- *      - pipe_handle = The Pipe that caused this callback, or
- *        -1 if this callback wasn't associated with a pipe.
- *      - submit_handle = Transfer submit handle causing this
- *        callback, or -1 if this callback wasn't associated
- *        with a transfer.
- *      - Actual number of bytes transfer.
- *      - user_data = The user pointer supplied to the
- *        function cvmx_usb_submit() or
- *        cvmx_usb_register_callback() */
-typedef void (*cvmx_usb_callback_func_t)(cvmx_usb_state_t *state,
-                                         cvmx_usb_callback_t reason,
-                                         cvmx_usb_complete_t status,
-                                         int pipe_handle, int submit_handle,
-                                         int bytes_transferred, void *user_data);
-
-/**
- * Flags to pass the initialization function.
- */
-typedef enum
-{
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI = 1<<0,       /**< The USB port uses a 12MHz crystal as clock source
-                                                            at USB_XO and USB_XI. */
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND = 1<<1,      /**< The USB port uses 12/24/48MHz 2.5V board clock
-                                                            source at USB_XO. USB_XI should be tied to GND.*/
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO = 0,           /**< Automatically determine clock type based on function
-                                                             in cvmx-helper-board.c. */
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK  = 3<<3,       /**< Mask for clock speed field */
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ = 1<<3,       /**< Speed of reference clock or crystal */
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ = 2<<3,       /**< Speed of reference clock */
-    CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ = 3<<3,       /**< Speed of reference clock */
-    /* Bits 3-4 used to encode the clock frequency */
-    CVMX_USB_INITIALIZE_FLAGS_NO_DMA = 1<<5,            /**< Disable DMA and used polled IO for data transfer use for the USB  */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS = 1<<16,  /**< Enable extra console output for debugging USB transfers */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS = 1<<17,  /**< Enable extra console output for debugging USB callbacks */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO = 1<<18,       /**< Enable extra console output for USB informational data */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS = 1<<19,      /**< Enable extra console output for every function call */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS = 1<<20,       /**< Enable extra console output for every CSR access */
-    CVMX_USB_INITIALIZE_FLAGS_DEBUG_ALL = ((CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS<<1)-1) - (CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS-1),
-} cvmx_usb_initialize_flags_t;
-
-/**
- * Flags for passing when a pipe is created. Currently no flags
- * need to be passed.
- */
-typedef enum
-{
-    CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS = 1<<15,/**< Used to display CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS for a specific pipe only */
-    __CVMX_USB_PIPE_FLAGS_OPEN = 1<<16,         /**< Used internally to determine if a pipe is open. Do not use */
-    __CVMX_USB_PIPE_FLAGS_SCHEDULED = 1<<17,    /**< Used internally to determine if a pipe is actively using hardware. Do not use */
-    __CVMX_USB_PIPE_FLAGS_NEED_PING = 1<<18,    /**< Used internally to determine if a high speed pipe is in the ping state. Do not use */
-} cvmx_usb_pipe_flags_t;
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * cvmx_usb_state_t structures.
- *
- * @return Number of port, zero if usb isn't supported
- */
-extern int cvmx_usb_get_num_ports(void);
-
-/**
- * Initialize a USB port for use. This must be called before any
- * other access to the Octeon USB port is made. The port starts
- * off in the disabled state.
- *
- * @param state  Pointer to an empty cvmx_usb_state_t structure
- *               that will be populated by the initialize call.
- *               This structure is then passed to all other USB
- *               functions.
- * @param usb_port_number
- *               Which Octeon USB port to initialize.
- * @param flags  Flags to control hardware initialization. See
- *               cvmx_usb_initialize_flags_t for the flag
- *               definitions. Some flags are mandatory.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
-                                             int usb_port_number,
-                                             cvmx_usb_initialize_flags_t flags);
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state);
-
-/**
- * Enable a USB port. After this call succeeds, the USB port is
- * online and servicing requests.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state);
-
-/**
- * Disable a USB port. After this call the USB port will not
- * generate data transfers and will not generate events.
- * Transactions in process will fail and call their
- * associated callbacks.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state);
-
-/**
- * Get the current state of the USB port. Use this call to
- * determine if the usb port has anything connected, is enabled,
- * or has some sort of error condition. The return value of this
- * call has "changed" bits to signal of the value of some fields
- * have changed between calls. These "changed" fields are based
- * on the last call to cvmx_usb_set_status(). In order to clear
- * them, you must update the status through cvmx_usb_set_status().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return Port status information
- */
-extern cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state);
-
-/**
- * Set the current state of the USB port. The status is used as
- * a reference for the "changed" bits returned by
- * cvmx_usb_get_status(). Other than serving as a reference, the
- * status passed to this function is not used. No fields can be
- * changed through this call.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param port_status
- *               Port status to set, most like returned by cvmx_usb_get_status()
- */
-extern void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status);
-
-/**
- * Open a virtual pipe between the host and a USB device. A pipe
- * must be opened before data can be transferred between a device
- * and Octeon.
- *
- * @param state      USB device state populated by
- *                   cvmx_usb_initialize().
- * @param flags      Optional pipe flags defined in
- *                   cvmx_usb_pipe_flags_t.
- * @param device_addr
- *                   USB device address to open the pipe to
- *                   (0-127).
- * @param endpoint_num
- *                   USB endpoint number to open the pipe to
- *                   (0-15).
- * @param device_speed
- *                   The speed of the device the pipe is going
- *                   to. This must match the device's speed,
- *                   which may be different than the port speed.
- * @param max_packet The maximum packet length the device can
- *                   transmit/receive (low speed=0-8, full
- *                   speed=0-1023, high speed=0-1024). This value
- *                   comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <10:0>.
- * @param transfer_type
- *                   The type of transfer this pipe is for.
- * @param transfer_dir
- *                   The direction the pipe is in. This is not
- *                   used for control pipes.
- * @param interval   For ISOCHRONOUS and INTERRUPT transfers,
- *                   this is how often the transfer is scheduled
- *                   for. All other transfers should specify
- *                   zero. The units are in frames (8000/sec at
- *                   high speed, 1000/sec for full speed).
- * @param multi_count
- *                   For high speed devices, this is the maximum
- *                   allowed number of packet per microframe.
- *                   Specify zero for non high speed devices. This
- *                   value comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <12:11>.
- * @param hub_device_addr
- *                   Hub device address this device is connected
- *                   to. Devices connected directly to Octeon
- *                   use zero. This is only used when the device
- *                   is full/low speed behind a high speed hub.
- *                   The address will be of the high speed hub,
- *                   not and full speed hubs after it.
- * @param hub_port   Which port on the hub the device is
- *                   connected. Use zero for devices connected
- *                   directly to Octeon. Like hub_device_addr,
- *                   this is only used for full/low speed
- *                   devices behind a high speed hub.
- *
- * @return A non negative value is a pipe handle. Negative
- *         values are failure codes from cvmx_usb_status_t.
- */
-extern int cvmx_usb_open_pipe(cvmx_usb_state_t *state,
-                              cvmx_usb_pipe_flags_t flags,
-                              int device_addr, int endpoint_num,
-                              cvmx_usb_speed_t device_speed, int max_packet,
-                              cvmx_usb_transfer_t transfer_type,
-                              cvmx_usb_direction_t transfer_dir, int interval,
-                              int multi_count, int hub_device_addr,
-                              int hub_port);
-
-/**
- * Call to submit a USB Bulk transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-extern int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
-                                uint64_t buffer, int buffer_length,
-                                cvmx_usb_callback_func_t callback,
-                                void *user_data);
-
-/**
- * Call to submit a USB Interrupt transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-extern int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
-                                     uint64_t buffer, int buffer_length,
-                                     cvmx_usb_callback_func_t callback,
-                                     void *user_data);
-
-/**
- * Call to submit a USB Control transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param control_header
- *                  USB 8 byte control header physical address.
- *                  Note that this is NOT A POINTER, but the
- *                  full 64bit physical address of the buffer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-extern int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
-                                   uint64_t control_header,
-                                   uint64_t buffer, int buffer_length,
-                                   cvmx_usb_callback_func_t callback,
-                                   void *user_data);
-
-/**
- * Flags to pass the cvmx_usb_submit_isochronous() function.
- */
-typedef enum
-{
-    CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT = 1<<0,  /**< Do not return an error if a transfer is less than the maximum packet size of the device */
-    CVMX_USB_ISOCHRONOUS_FLAGS_ASAP = 1<<1,         /**< Schedule the transaction as soon as possible */
-} cvmx_usb_isochronous_flags_t;
-
-/**
- * Call to submit a USB Isochronous transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param start_frame
- *                  Number of frames into the future to schedule
- *                  this transaction.
- * @param flags     Flags to control the transfer. See
- *                  cvmx_usb_isochronous_flags_t for the flag
- *                  definitions.
- * @param number_packets
- *                  Number of sequential packets to transfer.
- *                  "packets" is a pointer to an array of this
- *                  many packet structures.
- * @param packets   Description of each transfer packet as
- *                  defined by cvmx_usb_iso_packet_t. The array
- *                  pointed to here must stay valid until the
- *                  complete callback is called.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are failure codes from
- *         cvmx_usb_status_t.
- */
-extern int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
-                                       int start_frame, int flags,
-                                       int number_packets,
-                                       cvmx_usb_iso_packet_t packets[],
-                                       uint64_t buffer, int buffer_length,
-                                       cvmx_usb_callback_func_t callback,
-                                       void *user_data);
-
-/**
- * Cancel one outstanding request in a pipe. Canceling a request
- * can fail if the transaction has already completed before cancel
- * is called. Even after a successful cancel call, it may take
- * a frame or two for the cvmx_usb_poll() function to call the
- * associated callback.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- * @param submit_handle
- *               Handle to transaction to cancel, returned by the submit function.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state,
-                                         int pipe_handle, int submit_handle);
-
-
-/**
- * Cancel all outstanding requests in a pipe. Logically all this
- * does is call cvmx_usb_cancel() in a loop.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state,
-                                             int pipe_handle);
-
-/**
- * Close a pipe created with cvmx_usb_open_pipe().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to close.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
- *         pipe has outstanding transfers.
- */
-extern cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state,
-                                             int pipe_handle);
-
-/**
- * Register a function to be called when various USB events occur.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param reason    Which event to register for.
- * @param callback  Function to call when the event occurs.
- * @param user_data User data parameter to the function.
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
-                                                    cvmx_usb_callback_t reason,
-                                                    cvmx_usb_callback_func_t callback,
-                                                    void *user_data);
-
-/**
- * Get the current USB protocol level frame number. The frame
- * number is always in the range of 0-0x7ff.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return USB frame number
- */
-extern int cvmx_usb_get_frame_number(cvmx_usb_state_t *state);
-
-/**
- * Poll the USB block for status and call all needed callback
- * handlers. This function is meant to be called in the interrupt
- * handler for the USB controller. It can also be called
- * periodically in a loop for non-interrupt based operation.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return CVMX_USB_SUCCESS or a negative error code defined in
- *         cvmx_usb_status_t.
- */
-extern cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state);
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif  /* __CVMX_USB_H__ */
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbcx-defs.h b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbcx-defs.h
deleted file mode 100644
index 394e84662c..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbcx-defs.h
+++ /dev/null
@@ -1,1551 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbcx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbcx.
- *
- */
-#ifndef __CVMX_USBCX_TYPEDEFS_H__
-#define __CVMX_USBCX_TYPEDEFS_H__
-
-#define CVMX_USBCXBASE 0x00016F0010000000ull
-#define CVMX_USBCXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
-	 ((bid) & 1) * 0x100000000000ull)
-#define CVMX_USBCXREG2(reg, bid, off) \
-	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
-	 (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32)
-
-#define CVMX_USBCX_GAHBCFG(bid)		CVMX_USBCXREG1(0x008, bid)
-#define CVMX_USBCX_GHWCFG3(bid)		CVMX_USBCXREG1(0x04c, bid)
-#define CVMX_USBCX_GINTMSK(bid)		CVMX_USBCXREG1(0x018, bid)
-#define CVMX_USBCX_GINTSTS(bid)		CVMX_USBCXREG1(0x014, bid)
-#define CVMX_USBCX_GNPTXFSIZ(bid)	CVMX_USBCXREG1(0x028, bid)
-#define CVMX_USBCX_GNPTXSTS(bid)	CVMX_USBCXREG1(0x02c, bid)
-#define CVMX_USBCX_GOTGCTL(bid)		CVMX_USBCXREG1(0x000, bid)
-#define CVMX_USBCX_GRSTCTL(bid)		CVMX_USBCXREG1(0x010, bid)
-#define CVMX_USBCX_GRXFSIZ(bid)		CVMX_USBCXREG1(0x024, bid)
-#define CVMX_USBCX_GRXSTSPH(bid)	CVMX_USBCXREG1(0x020, bid)
-#define CVMX_USBCX_GUSBCFG(bid)		CVMX_USBCXREG1(0x00c, bid)
-#define CVMX_USBCX_HAINT(bid)		CVMX_USBCXREG1(0x414, bid)
-#define CVMX_USBCX_HAINTMSK(bid)	CVMX_USBCXREG1(0x418, bid)
-#define CVMX_USBCX_HCCHARX(off, bid)	CVMX_USBCXREG2(0x500, bid, off)
-#define CVMX_USBCX_HCFG(bid)		CVMX_USBCXREG1(0x400, bid)
-#define CVMX_USBCX_HCINTMSKX(off, bid)	CVMX_USBCXREG2(0x50c, bid, off)
-#define CVMX_USBCX_HCINTX(off, bid)	CVMX_USBCXREG2(0x508, bid, off)
-#define CVMX_USBCX_HCSPLTX(off, bid)	CVMX_USBCXREG2(0x504, bid, off)
-#define CVMX_USBCX_HCTSIZX(off, bid)	CVMX_USBCXREG2(0x510, bid, off)
-#define CVMX_USBCX_HFIR(bid)		CVMX_USBCXREG1(0x404, bid)
-#define CVMX_USBCX_HFNUM(bid)		CVMX_USBCXREG1(0x408, bid)
-#define CVMX_USBCX_HPRT(bid)		CVMX_USBCXREG1(0x440, bid)
-#define CVMX_USBCX_HPTXFSIZ(bid)	CVMX_USBCXREG1(0x100, bid)
-#define CVMX_USBCX_HPTXSTS(bid)		CVMX_USBCXREG1(0x410, bid)
-
-/**
- * cvmx_usbc#_gahbcfg
- *
- * Core AHB Configuration Register (GAHBCFG)
- *
- * This register can be used to configure the core after power-on or a change in
- * mode of operation. This register mainly contains AHB system-related
- * configuration parameters. The AHB is the processor interface to the O2P USB
- * core. In general, software need not know about this interface except to
- * program the values as specified.
- *
- * The application must program this register as part of the O2P USB core
- * initialization. Do not change this register after the initial programming.
- */
-union cvmx_usbcx_gahbcfg {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gahbcfg_s
-	 * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl)
-	 *	Software should set this bit to 0x1.
-	 *	Indicates when the Periodic TxFIFO Empty Interrupt bit in the
-	 *	Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
-	 *	bit is used only in Slave mode.
-	 *	* 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
-	 *	TxFIFO is half empty
-	 *	* 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
-	 *	TxFIFO is completely empty
-	 * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
-	 *	Software should set this bit to 0x1.
-	 *	Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
-	 *	the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
-	 *	This bit is used only in Slave mode.
-	 *	* 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
-	 *	Periodic TxFIFO is half empty
-	 *	* 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
-	 *	Periodic TxFIFO is completely empty
-	 * @dmaen: DMA Enable (DMAEn)
-	 *	* 1'b0: Core operates in Slave mode
-	 *	* 1'b1: Core operates in a DMA mode
-	 * @hbstlen: Burst Length/Type (HBstLen)
-	 *	This field has not effect and should be left as 0x0.
-	 * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
-	 *	Software should set this field to 0x1.
-	 *	The application uses this bit to mask or unmask the interrupt
-	 *	line assertion to itself. Irrespective of this bit's setting,
-	 *	the interrupt status registers are updated by the core.
-	 *	* 1'b0: Mask the interrupt assertion to the application.
-	 *	* 1'b1: Unmask the interrupt assertion to the application.
-	 */
-	struct cvmx_usbcx_gahbcfg_s {
-		uint32_t reserved_9_31	: 23;
-		uint32_t ptxfemplvl	: 1;
-		uint32_t nptxfemplvl	: 1;
-		uint32_t reserved_6_6	: 1;
-		uint32_t dmaen		: 1;
-		uint32_t hbstlen	: 4;
-		uint32_t glblintrmsk	: 1;
-	} s;
-};
-typedef union cvmx_usbcx_gahbcfg cvmx_usbcx_gahbcfg_t;
-
-/**
- * cvmx_usbc#_ghwcfg3
- *
- * User HW Config3 Register (GHWCFG3)
- *
- * This register contains the configuration options of the O2P USB core.
- */
-union cvmx_usbcx_ghwcfg3 {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_ghwcfg3_s
-	 * @dfifodepth: DFIFO Depth (DfifoDepth)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 32
-	 *	* Maximum value is 32768
-	 * @ahbphysync: AHB and PHY Synchronous (AhbPhySync)
-	 *	Indicates whether AHB and PHY clocks are synchronous to
-	 *	each other.
-	 *	* 1'b0: No
-	 *	* 1'b1: Yes
-	 *	This bit is tied to 1.
-	 * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType)
-	 *	* 1'b0: Asynchronous reset is used in the core
-	 *	* 1'b1: Synchronous reset is used in the core
-	 * @optfeature: Optional Features Removed (OptFeature)
-	 *	Indicates whether the User ID register, GPIO interface ports,
-	 *	and SOF toggle and counter ports were removed for gate count
-	 *	optimization.
-	 * @vendor_control_interface_support: Vendor Control Interface Support
-	 *	* 1'b0: Vendor Control Interface is not available on the core.
-	 *	* 1'b1: Vendor Control Interface is available.
-	 * @i2c_selection: I2C Selection
-	 *	* 1'b0: I2C Interface is not available on the core.
-	 *	* 1'b1: I2C Interface is available on the core.
-	 * @otgen: OTG Function Enabled (OtgEn)
-	 *	The application uses this bit to indicate the O2P USB core's
-	 *	OTG capabilities.
-	 *	* 1'b0: Not OTG capable
-	 *	* 1'b1: OTG Capable
-	 * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth)
-	 *	* 3'b000: 4 bits
-	 *	* 3'b001: 5 bits
-	 *	* 3'b010: 6 bits
-	 *	* 3'b011: 7 bits
-	 *	* 3'b100: 8 bits
-	 *	* 3'b101: 9 bits
-	 *	* 3'b110: 10 bits
-	 *	* Others: Reserved
-	 * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth)
-	 *	* 4'b0000: 11 bits
-	 *	* 4'b0001: 12 bits
-	 *	- ...
-	 *	* 4'b1000: 19 bits
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_ghwcfg3_s {
-		uint32_t dfifodepth				: 16;
-		uint32_t reserved_13_15				: 3;
-		uint32_t ahbphysync				: 1;
-		uint32_t rsttype				: 1;
-		uint32_t optfeature				: 1;
-		uint32_t vendor_control_interface_support	: 1;
-		uint32_t i2c_selection				: 1;
-		uint32_t otgen					: 1;
-		uint32_t pktsizewidth				: 3;
-		uint32_t xfersizewidth				: 4;
-	} s;
-};
-typedef union cvmx_usbcx_ghwcfg3 cvmx_usbcx_ghwcfg3_t;
-
-/**
- * cvmx_usbc#_gintmsk
- *
- * Core Interrupt Mask Register (GINTMSK)
- *
- * This register works with the Core Interrupt register to interrupt the
- * application. When an interrupt bit is masked, the interrupt associated with
- * that bit will not be generated. However, the Core Interrupt (GINTSTS)
- * register bit corresponding to that interrupt will still be set.
- * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_gintmsk {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gintmsk_s
-	 * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask
-	 *	(WkUpIntMsk)
-	 * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask
-	 *	(SessReqIntMsk)
-	 * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk)
-	 * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk)
-	 * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk)
-	 * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk)
-	 * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk)
-	 * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk)
-	 * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
-	 *	Incomplete Isochronous OUT Transfer Mask
-	 *	(incompISOOUTMsk)
-	 * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
-	 *		    (incompISOINMsk)
-	 * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
-	 * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
-	 * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
-	 * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk)
-	 * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask
-	 *	(ISOOutDropMsk)
-	 * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk)
-	 * @usbrstmsk: USB Reset Mask (USBRstMsk)
-	 * @usbsuspmsk: USB Suspend Mask (USBSuspMsk)
-	 * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk)
-	 * @i2cint: I2C Interrupt Mask (I2CINT)
-	 * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
-	 *	I2C Carkit Interrupt Mask (I2CCKINTMsk)
-	 * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
-	 * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
-	 *		  (GINNakEffMsk)
-	 * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
-	 * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
-	 * @sofmsk: Start of (micro)Frame Mask (SofMsk)
-	 * @otgintmsk: OTG Interrupt Mask (OTGIntMsk)
-	 * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk)
-	 */
-	struct cvmx_usbcx_gintmsk_s {
-		uint32_t wkupintmsk		: 1;
-		uint32_t sessreqintmsk		: 1;
-		uint32_t disconnintmsk		: 1;
-		uint32_t conidstschngmsk	: 1;
-		uint32_t reserved_27_27		: 1;
-		uint32_t ptxfempmsk		: 1;
-		uint32_t hchintmsk		: 1;
-		uint32_t prtintmsk		: 1;
-		uint32_t reserved_23_23		: 1;
-		uint32_t fetsuspmsk		: 1;
-		uint32_t incomplpmsk		: 1;
-		uint32_t incompisoinmsk		: 1;
-		uint32_t oepintmsk		: 1;
-		uint32_t inepintmsk		: 1;
-		uint32_t epmismsk		: 1;
-		uint32_t reserved_16_16		: 1;
-		uint32_t eopfmsk		: 1;
-		uint32_t isooutdropmsk		: 1;
-		uint32_t enumdonemsk		: 1;
-		uint32_t usbrstmsk		: 1;
-		uint32_t usbsuspmsk		: 1;
-		uint32_t erlysuspmsk		: 1;
-		uint32_t i2cint			: 1;
-		uint32_t ulpickintmsk		: 1;
-		uint32_t goutnakeffmsk		: 1;
-		uint32_t ginnakeffmsk		: 1;
-		uint32_t nptxfempmsk		: 1;
-		uint32_t rxflvlmsk		: 1;
-		uint32_t sofmsk			: 1;
-		uint32_t otgintmsk		: 1;
-		uint32_t modemismsk		: 1;
-		uint32_t reserved_0_0		: 1;
-	} s;
-};
-typedef union cvmx_usbcx_gintmsk cvmx_usbcx_gintmsk_t;
-
-/**
- * cvmx_usbc#_gintsts
- *
- * Core Interrupt Register (GINTSTS)
- *
- * This register interrupts the application for system-level events in the
- * current mode of operation (Device mode or Host mode). It is shown in
- * Interrupt. Some of the bits in this register are valid only in Host mode,
- * while others are valid in Device mode only. This register also indicates the
- * current mode of operation. In order to clear the interrupt status bits of
- * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
- * interrupts are read only; once software reads from or writes to the FIFO
- * while servicing these interrupts, FIFO interrupt conditions are cleared
- * automatically.
- */
-union cvmx_usbcx_gintsts {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gintsts_s
-	 * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt)
-	 *	In Device mode, this interrupt is asserted when a resume is
-	 *	detected on the USB. In Host mode, this interrupt is asserted
-	 *	when a remote wakeup is detected on the USB.
-	 *	For more information on how to use this interrupt, see "Partial
-	 *	Power-Down and Clock Gating Programming Model" on
-	 *	page 353.
-	 * @sessreqint: Session Request/New Session Detected Interrupt
-	 *		(SessReqInt)
-	 *	In Host mode, this interrupt is asserted when a session request
-	 *	is detected from the device. In Device mode, this interrupt is
-	 *	asserted when the utmiotg_bvalid signal goes high.
-	 *	For more information on how to use this interrupt, see "Partial
-	 *	Power-Down and Clock Gating Programming Model" on
-	 *	page 353.
-	 * @disconnint: Disconnect Detected Interrupt (DisconnInt)
-	 *	Asserted when a device disconnect is detected.
-	 * @conidstschng: Connector ID Status Change (ConIDStsChng)
-	 *	The core sets this bit when there is a change in connector ID
-	 *	status.
-	 * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp)
-	 *	Asserted when the Periodic Transmit FIFO is either half or
-	 *	completely empty and there is space for at least one entry to be
-	 *	written in the Periodic Request Queue. The half or completely
-	 *	empty status is determined by the Periodic TxFIFO Empty Level
-	 *	bit in the Core AHB Configuration register
-	 *	(GAHBCFG.PTxFEmpLvl).
-	 * @hchint: Host Channels Interrupt (HChInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the channels of the core (in Host mode). The
-	 *	application must read the Host All Channels Interrupt (HAINT)
-	 *	register to determine the exact number of the channel on which
-	 *	the interrupt occurred, and then read the corresponding Host
-	 *	Channel-n Interrupt (HCINTn) register to determine the exact
-	 *	cause of the interrupt. The application must clear the
-	 *	appropriate status bit in the HCINTn register to clear this bit.
-	 * @prtint: Host Port Interrupt (PrtInt)
-	 *	The core sets this bit to indicate a change in port status of
-	 *	one of the O2P USB core ports in Host mode. The application must
-	 *	read the Host Port Control and Status (HPRT) register to
-	 *	determine the exact event that caused this interrupt. The
-	 *	application must clear the appropriate status bit in the Host
-	 *	Port Control and Status register to clear this bit.
-	 * @fetsusp: Data Fetch Suspended (FetSusp)
-	 *	This interrupt is valid only in DMA mode. This interrupt
-	 *	indicates that the core has stopped fetching data for IN
-	 *	endpoints due to the unavailability of TxFIFO space or Request
-	 *	Queue space. This interrupt is used by the application for an
-	 *	endpoint mismatch algorithm.
-	 * @incomplp: Incomplete Periodic Transfer (incomplP)
-	 *	In Host mode, the core sets this interrupt bit when there are
-	 *	incomplete periodic transactions still pending which are
-	 *	scheduled for the current microframe.
-	 *	Incomplete Isochronous OUT Transfer (incompISOOUT)
-	 *	The Device mode, the core sets this interrupt to indicate that
-	 *	there is at least one isochronous OUT endpoint on which the
-	 *	transfer is not completed in the current microframe. This
-	 *	interrupt is asserted along with the End of Periodic Frame
-	 *	Interrupt (EOPF) bit in this register.
-	 * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
-	 *	The core sets this interrupt to indicate that there is at least
-	 *	one isochronous IN endpoint on which the transfer is not
-	 *	completed in the current microframe. This interrupt is asserted
-	 *	along with the End of Periodic Frame Interrupt (EOPF) bit in
-	 *	this register.
-	 * @oepint: OUT Endpoints Interrupt (OEPInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the OUT endpoints of the core (in Device mode). The
-	 *	application must read the Device All Endpoints Interrupt
-	 *	(DAINT) register to determine the exact number of the OUT
-	 *	endpoint on which the interrupt occurred, and then read the
-	 *	corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
-	 *	register to determine the exact cause of the interrupt. The
-	 *	application must clear the appropriate status bit in the
-	 *	corresponding DOEPINTn register to clear this bit.
-	 * @iepint: IN Endpoints Interrupt (IEPInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the IN endpoints of the core (in Device mode). The
-	 *	application must read the Device All Endpoints Interrupt
-	 *	(DAINT) register to determine the exact number of the IN
-	 *	endpoint on which the interrupt occurred, and then read the
-	 *	corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
-	 *	register to determine the exact cause of the interrupt. The
-	 *	application must clear the appropriate status bit in the
-	 *	corresponding DIEPINTn register to clear this bit.
-	 * @epmis: Endpoint Mismatch Interrupt (EPMis)
-	 *	Indicates that an IN token has been received for a non-periodic
-	 *	endpoint, but the data for another endpoint is present in the
-	 *	top of the Non-Periodic Transmit FIFO and the IN endpoint
-	 *	mismatch count programmed by the application has expired.
-	 * @eopf: End of Periodic Frame Interrupt (EOPF)
-	 *	Indicates that the period specified in the Periodic Frame
-	 *	Interval field of the Device Configuration register
-	 *	(DCFG.PerFrInt) has been reached in the current microframe.
-	 * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
-	 *	The core sets this bit when it fails to write an isochronous OUT
-	 *	packet into the RxFIFO because the RxFIFO doesn't have
-	 *	enough space to accommodate a maximum packet size packet
-	 *	for the isochronous OUT endpoint.
-	 * @enumdone: Enumeration Done (EnumDone)
-	 *	The core sets this bit to indicate that speed enumeration is
-	 *	complete. The application must read the Device Status (DSTS)
-	 *	register to obtain the enumerated speed.
-	 * @usbrst: USB Reset (USBRst)
-	 *	The core sets this bit to indicate that a reset is detected on
-	 *	the USB.
-	 * @usbsusp: USB Suspend (USBSusp)
-	 *	The core sets this bit to indicate that a suspend was detected
-	 *	on the USB. The core enters the Suspended state when there
-	 *	is no activity on the phy_line_state_i signal for an extended
-	 *	period of time.
-	 * @erlysusp: Early Suspend (ErlySusp)
-	 *	The core sets this bit to indicate that an Idle state has been
-	 *	detected on the USB for 3 ms.
-	 * @i2cint: I2C Interrupt (I2CINT)
-	 *	This bit is always 0x0.
-	 * @ulpickint: ULPI Carkit Interrupt (ULPICKINT)
-	 *	This bit is always 0x0.
-	 * @goutnakeff: Global OUT NAK Effective (GOUTNakEff)
-	 *	Indicates that the Set Global OUT NAK bit in the Device Control
-	 *	register (DCTL.SGOUTNak), set by the application, has taken
-	 *	effect in the core. This bit can be cleared by writing the Clear
-	 *	Global OUT NAK bit in the Device Control register
-	 *	(DCTL.CGOUTNak).
-	 * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff)
-	 *	Indicates that the Set Global Non-Periodic IN NAK bit in the
-	 *	Device Control register (DCTL.SGNPInNak), set by the
-	 *	application, has taken effect in the core. That is, the core has
-	 *	sampled the Global IN NAK bit set by the application. This bit
-	 *	can be cleared by clearing the Clear Global Non-Periodic IN
-	 *	NAK bit in the Device Control register (DCTL.CGNPInNak).
-	 *	This interrupt does not necessarily mean that a NAK handshake
-	 *	is sent out on the USB. The STALL bit takes precedence over
-	 *	the NAK bit.
-	 * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp)
-	 *	This interrupt is asserted when the Non-Periodic TxFIFO is
-	 *	either half or completely empty, and there is space for at least
-	 *	one entry to be written to the Non-Periodic Transmit Request
-	 *	Queue. The half or completely empty status is determined by
-	 *	the Non-Periodic TxFIFO Empty Level bit in the Core AHB
-	 *	Configuration register (GAHBCFG.NPTxFEmpLvl).
-	 * @rxflvl: RxFIFO Non-Empty (RxFLvl)
-	 *	Indicates that there is at least one packet pending to be read
-	 *	from the RxFIFO.
-	 * @sof: Start of (micro)Frame (Sof)
-	 *	In Host mode, the core sets this bit to indicate that an SOF
-	 *	(FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
-	 *	USB. The application must write a 1 to this bit to clear the
-	 *	interrupt.
-	 *	In Device mode, in the core sets this bit to indicate that an
-	 *	SOF token has been received on the USB. The application can read
-	 *	the Device Status register to get the current (micro)frame
-	 *	number. This interrupt is seen only when the core is operating
-	 *	at either HS or FS.
-	 * @otgint: OTG Interrupt (OTGInt)
-	 *	The core sets this bit to indicate an OTG protocol event. The
-	 *	application must read the OTG Interrupt Status (GOTGINT)
-	 *	register to determine the exact event that caused this
-	 *	interrupt. The application must clear the appropriate status bit
-	 *	in the GOTGINT register to clear this bit.
-	 * @modemis: Mode Mismatch Interrupt (ModeMis)
-	 *	The core sets this bit when the application is trying to access:
-	 *	* A Host mode register, when the core is operating in Device
-	 *	mode
-	 *	* A Device mode register, when the core is operating in Host
-	 *	mode
-	 *	The register access is completed on the AHB with an OKAY
-	 *	response, but is ignored by the core internally and doesn't
-	 *	affect the operation of the core.
-	 * @curmod: Current Mode of Operation (CurMod)
-	 *	Indicates the current mode of operation.
-	 *	* 1'b0: Device mode
-	 *	* 1'b1: Host mode
-	 */
-	struct cvmx_usbcx_gintsts_s {
-		uint32_t wkupint	: 1;
-		uint32_t sessreqint	: 1;
-		uint32_t disconnint	: 1;
-		uint32_t conidstschng	: 1;
-		uint32_t reserved_27_27	: 1;
-		uint32_t ptxfemp	: 1;
-		uint32_t hchint		: 1;
-		uint32_t prtint		: 1;
-		uint32_t reserved_23_23	: 1;
-		uint32_t fetsusp	: 1;
-		uint32_t incomplp	: 1;
-		uint32_t incompisoin	: 1;
-		uint32_t oepint		: 1;
-		uint32_t iepint		: 1;
-		uint32_t epmis		: 1;
-		uint32_t reserved_16_16	: 1;
-		uint32_t eopf		: 1;
-		uint32_t isooutdrop	: 1;
-		uint32_t enumdone	: 1;
-		uint32_t usbrst		: 1;
-		uint32_t usbsusp	: 1;
-		uint32_t erlysusp	: 1;
-		uint32_t i2cint		: 1;
-		uint32_t ulpickint	: 1;
-		uint32_t goutnakeff	: 1;
-		uint32_t ginnakeff	: 1;
-		uint32_t nptxfemp	: 1;
-		uint32_t rxflvl		: 1;
-		uint32_t sof		: 1;
-		uint32_t otgint		: 1;
-		uint32_t modemis	: 1;
-		uint32_t curmod		: 1;
-	} s;
-};
-typedef union cvmx_usbcx_gintsts cvmx_usbcx_gintsts_t;
-
-/**
- * cvmx_usbc#_gnptxfsiz
- *
- * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
- *
- * The application can program the RAM size and the memory start address for the
- * Non-Periodic TxFIFO.
- */
-union cvmx_usbcx_gnptxfsiz {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gnptxfsiz_s
-	 * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep)
-	 *	This value is in terms of 32-bit words.
-	 *	Minimum value is 16
-	 *	Maximum value is 32768
-	 * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
-	 *	This field contains the memory start address for Non-Periodic
-	 *	Transmit FIFO RAM.
-	 */
-	struct cvmx_usbcx_gnptxfsiz_s {
-		uint32_t nptxfdep	: 16;
-		uint32_t nptxfstaddr	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_gnptxfsiz cvmx_usbcx_gnptxfsiz_t;
-
-/**
- * cvmx_usbc#_gnptxsts
- *
- * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
- *
- * This read-only register contains the free space information for the
- * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
- */
-union cvmx_usbcx_gnptxsts {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gnptxsts_s
-	 * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
-	 *	Entry in the Non-Periodic Tx Request Queue that is currently
-	 *	being processed by the MAC.
-	 *	* Bits [30:27]: Channel/endpoint number
-	 *	* Bits [26:25]:
-	 *	- 2'b00: IN/OUT token
-	 *	- 2'b01: Zero-length transmit packet (device IN/host OUT)
-	 *	- 2'b10: PING/CSPLIT token
-	 *	- 2'b11: Channel halt command
-	 *	* Bit [24]: Terminate (last entry for selected channel/endpoint)
-	 * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available
-	 *	(NPTxQSpcAvail)
-	 *	Indicates the amount of free space available in the Non-
-	 *	Periodic Transmit Request Queue. This queue holds both IN
-	 *	and OUT requests in Host mode. Device mode has only IN
-	 *	requests.
-	 *	* 8'h0: Non-Periodic Transmit Request Queue is full
-	 *	* 8'h1: 1 location available
-	 *	* 8'h2: 2 locations available
-	 *	* n: n locations available (0..8)
-	 *	* Others: Reserved
-	 * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
-	 *	Indicates the amount of free space available in the Non-
-	 *	Periodic TxFIFO.
-	 *	Values are in terms of 32-bit words.
-	 *	* 16'h0: Non-Periodic TxFIFO is full
-	 *	* 16'h1: 1 word available
-	 *	* 16'h2: 2 words available
-	 *	* 16'hn: n words available (where 0..32768)
-	 *	* 16'h8000: 32768 words available
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_gnptxsts_s {
-		uint32_t reserved_31_31	: 1;
-		uint32_t nptxqtop	: 7;
-		uint32_t nptxqspcavail	: 8;
-		uint32_t nptxfspcavail	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_gnptxsts cvmx_usbcx_gnptxsts_t;
-
-/**
- * cvmx_usbc#_grstctl
- *
- * Core Reset Register (GRSTCTL)
- *
- * The application uses this register to reset various hardware features inside
- * the core.
- */
-union cvmx_usbcx_grstctl {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_grstctl_s
-	 * @ahbidle: AHB Master Idle (AHBIdle)
-	 *	Indicates that the AHB Master State Machine is in the IDLE
-	 *	condition.
-	 * @dmareq: DMA Request Signal (DMAReq)
-	 *	Indicates that the DMA request is in progress. Used for debug.
-	 * @txfnum: TxFIFO Number (TxFNum)
-	 *	This is the FIFO number that must be flushed using the TxFIFO
-	 *	Flush bit. This field must not be changed until the core clears
-	 *	the TxFIFO Flush bit.
-	 *	* 5'h0: Non-Periodic TxFIFO flush
-	 *	* 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
-	 *	TxFIFO flush in Host mode
-	 *	* 5'h2: Periodic TxFIFO 2 flush in Device mode
-	 *	- ...
-	 *	* 5'hF: Periodic TxFIFO 15 flush in Device mode
-	 *	* 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
-	 *	core
-	 * @txfflsh: TxFIFO Flush (TxFFlsh)
-	 *	This bit selectively flushes a single or all transmit FIFOs, but
-	 *	cannot do so if the core is in the midst of a transaction.
-	 *	The application must only write this bit after checking that the
-	 *	core is neither writing to the TxFIFO nor reading from the
-	 *	TxFIFO.
-	 *	The application must wait until the core clears this bit before
-	 *	performing any operations. This bit takes 8 clocks (of phy_clk
-	 *	or hclk, whichever is slower) to clear.
-	 * @rxfflsh: RxFIFO Flush (RxFFlsh)
-	 *	The application can flush the entire RxFIFO using this bit, but
-	 *	must first ensure that the core is not in the middle of a
-	 *	transaction.
-	 *	The application must only write to this bit after checking that
-	 *	the core is neither reading from the RxFIFO nor writing to the
-	 *	RxFIFO.
-	 *	The application must wait until the bit is cleared before
-	 *	performing any other operations. This bit will take 8 clocks
-	 *	(slowest of PHY or AHB clock) to clear.
-	 * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh)
-	 *	The application writes this bit to flush the IN Token Sequence
-	 *	Learning Queue.
-	 * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst)
-	 *	The application writes this bit to reset the (micro)frame number
-	 *	counter inside the core. When the (micro)frame counter is reset,
-	 *	the subsequent SOF sent out by the core will have a
-	 *	(micro)frame number of 0.
-	 * @hsftrst: HClk Soft Reset (HSftRst)
-	 *	The application uses this bit to flush the control logic in the
-	 *	AHB Clock domain. Only AHB Clock Domain pipelines are reset.
-	 *	* FIFOs are not flushed with this bit.
-	 *	* All state machines in the AHB clock domain are reset to the
-	 *	Idle state after terminating the transactions on the AHB,
-	 *	following the protocol.
-	 *	* CSR control bits used by the AHB clock domain state
-	 *	machines are cleared.
-	 *	* To clear this interrupt, status mask bits that control the
-	 *	interrupt status and are generated by the AHB clock domain
-	 *	state machine are cleared.
-	 *	* Because interrupt status bits are not cleared, the application
-	 *	can get the status of any core events that occurred after it set
-	 *	this bit.
-	 *	This is a self-clearing bit that the core clears after all
-	 *	necessary logic is reset in the core. This may take several
-	 *	clocks, depending on the core's current state.
-	 * @csftrst: Core Soft Reset (CSftRst)
-	 *	Resets the hclk and phy_clock domains as follows:
-	 *	* Clears the interrupts and all the CSR registers except the
-	 *	following register bits:
-	 *	- PCGCCTL.RstPdwnModule
-	 *	- PCGCCTL.GateHclk
-	 *	- PCGCCTL.PwrClmp
-	 *	- PCGCCTL.StopPPhyLPwrClkSelclk
-	 *	- GUSBCFG.PhyLPwrClkSel
-	 *	- GUSBCFG.DDRSel
-	 *	- GUSBCFG.PHYSel
-	 *	- GUSBCFG.FSIntf
-	 *	- GUSBCFG.ULPI_UTMI_Sel
-	 *	- GUSBCFG.PHYIf
-	 *	- HCFG.FSLSPclkSel
-	 *	- DCFG.DevSpd
-	 *	* All module state machines (except the AHB Slave Unit) are
-	 *	reset to the IDLE state, and all the transmit FIFOs and the
-	 *	receive FIFO are flushed.
-	 *	* Any transactions on the AHB Master are terminated as soon
-	 *	as possible, after gracefully completing the last data phase of
-	 *	an AHB transfer. Any transactions on the USB are terminated
-	 *	immediately.
-	 *	The application can write to this bit any time it wants to reset
-	 *	the core. This is a self-clearing bit and the core clears this
-	 *	bit after all the necessary logic is reset in the core, which
-	 *	may take several clocks, depending on the current state of the
-	 *	core. Once this bit is cleared software should wait at least 3
-	 *	PHY clocks before doing any access to the PHY domain
-	 *	(synchronization delay). Software should also should check that
-	 *	bit 31 of this register is 1 (AHB Master is IDLE) before
-	 *	starting any operation.
-	 *	Typically software reset is used during software development
-	 *	and also when you dynamically change the PHY selection bits
-	 *	in the USB configuration registers listed above. When you
-	 *	change the PHY, the corresponding clock for the PHY is
-	 *	selected and used in the PHY domain. Once a new clock is
-	 *	selected, the PHY domain has to be reset for proper operation.
-	 */
-	struct cvmx_usbcx_grstctl_s {
-		uint32_t ahbidle	: 1;
-		uint32_t dmareq		: 1;
-		uint32_t reserved_11_29	: 19;
-		uint32_t txfnum		: 5;
-		uint32_t txfflsh	: 1;
-		uint32_t rxfflsh	: 1;
-		uint32_t intknqflsh	: 1;
-		uint32_t frmcntrrst	: 1;
-		uint32_t hsftrst	: 1;
-		uint32_t csftrst	: 1;
-	} s;
-};
-typedef union cvmx_usbcx_grstctl cvmx_usbcx_grstctl_t;
-
-/**
- * cvmx_usbc#_grxfsiz
- *
- * Receive FIFO Size Register (GRXFSIZ)
- *
- * The application can program the RAM size that must be allocated to the
- * RxFIFO.
- */
-union cvmx_usbcx_grxfsiz {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_grxfsiz_s
-	 * @rxfdep: RxFIFO Depth (RxFDep)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 16
-	 *	* Maximum value is 32768
-	 */
-	struct cvmx_usbcx_grxfsiz_s {
-		uint32_t reserved_16_31	: 16;
-		uint32_t rxfdep		: 16;
-	} s;
-};
-typedef union cvmx_usbcx_grxfsiz cvmx_usbcx_grxfsiz_t;
-
-/**
- * cvmx_usbc#_grxstsph
- *
- * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
- *
- * A read to the Receive Status Read and Pop register returns and additionally
- * pops the top data entry out of the RxFIFO.
- * This Description is only valid when the core is in Host Mode. For Device Mode
- * use USBC_GRXSTSPD instead.
- * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
- *	 same offset in the O2P USB core. The offset difference shown in this
- *	 document is for software clarity and is actually ignored by the
- *       hardware.
- */
-union cvmx_usbcx_grxstsph {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_grxstsph_s
-	 * @pktsts: Packet Status (PktSts)
-	 *	Indicates the status of the received packet
-	 *	* 4'b0010: IN data packet received
-	 *	* 4'b0011: IN transfer completed (triggers an interrupt)
-	 *	* 4'b0101: Data toggle error (triggers an interrupt)
-	 *	* 4'b0111: Channel halted (triggers an interrupt)
-	 *	* Others: Reserved
-	 * @dpid: Data PID (DPID)
-	 *	* 2'b00: DATA0
-	 *	* 2'b10: DATA1
-	 *	* 2'b01: DATA2
-	 *	* 2'b11: MDATA
-	 * @bcnt: Byte Count (BCnt)
-	 *	Indicates the byte count of the received IN data packet
-	 * @chnum: Channel Number (ChNum)
-	 *	Indicates the channel number to which the current received
-	 *	packet belongs.
-	 */
-	struct cvmx_usbcx_grxstsph_s {
-		uint32_t reserved_21_31	: 11;
-		uint32_t pktsts		: 4;
-		uint32_t dpid		: 2;
-		uint32_t bcnt		: 11;
-		uint32_t chnum		: 4;
-	} s;
-};
-typedef union cvmx_usbcx_grxstsph cvmx_usbcx_grxstsph_t;
-
-/**
- * cvmx_usbc#_gusbcfg
- *
- * Core USB Configuration Register (GUSBCFG)
- *
- * This register can be used to configure the core after power-on or a changing
- * to Host mode or Device mode. It contains USB and USB-PHY related
- * configuration parameters. The application must program this register before
- * starting any transactions on either the AHB or the USB. Do not make changes
- * to this register after the initial programming.
- */
-union cvmx_usbcx_gusbcfg {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_gusbcfg_s
-	 * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel)
-	 *	This bit is always 0x0.
-	 * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel)
-	 *	Software should set this bit to 0x0.
-	 *	Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
-	 *	FS and LS modes, the PHY can usually operate on a 48-MHz
-	 *	clock to save power.
-	 *	* 1'b0: 480-MHz Internal PLL clock
-	 *	* 1'b1: 48-MHz External Clock
-	 *	In 480 MHz mode, the UTMI interface operates at either 60 or
-	 *	30-MHz, depending upon whether 8- or 16-bit data width is
-	 *	selected. In 48-MHz mode, the UTMI interface operates at 48
-	 *	MHz in FS mode and at either 48 or 6 MHz in LS mode
-	 *	(depending on the PHY vendor).
-	 *	This bit drives the utmi_fsls_low_power core output signal, and
-	 *	is valid only for UTMI+ PHYs.
-	 * @usbtrdtim: USB Turnaround Time (USBTrdTim)
-	 *	Sets the turnaround time in PHY clocks.
-	 *	Specifies the response time for a MAC request to the Packet
-	 *	FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
-	 *	This must be programmed to 0x5.
-	 * @hnpcap: HNP-Capable (HNPCap)
-	 *	This bit is always 0x0.
-	 * @srpcap: SRP-Capable (SRPCap)
-	 *	This bit is always 0x0.
-	 * @ddrsel: ULPI DDR Select (DDRSel)
-	 *	Software should set this bit to 0x0.
-	 * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
-	 *	Software should set this bit to 0x0.
-	 * @fsintf: Full-Speed Serial Interface Select (FSIntf)
-	 *	Software should set this bit to 0x0.
-	 * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel)
-	 *	This bit is always 0x0.
-	 * @phyif: PHY Interface (PHYIf)
-	 *	This bit is always 0x1.
-	 * @toutcal: HS/FS Timeout Calibration (TOutCal)
-	 *	The number of PHY clocks that the application programs in this
-	 *	field is added to the high-speed/full-speed interpacket timeout
-	 *	duration in the core to account for any additional delays
-	 *	introduced by the PHY. This may be required, since the delay
-	 *	introduced by the PHY in generating the linestate condition may
-	 *	vary from one PHY to another.
-	 *	The USB standard timeout value for high-speed operation is
-	 *	736 to 816 (inclusive) bit times. The USB standard timeout
-	 *	value for full-speed operation is 16 to 18 (inclusive) bit
-	 *	times. The application must program this field based on the
-	 *	speed of enumeration. The number of bit times added per PHY
-	 *	clock are:
-	 *	High-speed operation:
-	 *	* One 30-MHz PHY clock = 16 bit times
-	 *	* One 60-MHz PHY clock = 8 bit times
-	 *	Full-speed operation:
-	 *	* One 30-MHz PHY clock = 0.4 bit times
-	 *	* One 60-MHz PHY clock = 0.2 bit times
-	 *	* One 48-MHz PHY clock = 0.25 bit times
-	 */
-	struct cvmx_usbcx_gusbcfg_s {
-		uint32_t reserved_17_31	: 15;
-		uint32_t otgi2csel	: 1;
-		uint32_t phylpwrclksel	: 1;
-		uint32_t reserved_14_14	: 1;
-		uint32_t usbtrdtim	: 4;
-		uint32_t hnpcap		: 1;
-		uint32_t srpcap		: 1;
-		uint32_t ddrsel		: 1;
-		uint32_t physel		: 1;
-		uint32_t fsintf		: 1;
-		uint32_t ulpi_utmi_sel	: 1;
-		uint32_t phyif		: 1;
-		uint32_t toutcal	: 3;
-	} s;
-};
-typedef union cvmx_usbcx_gusbcfg cvmx_usbcx_gusbcfg_t;
-
-/**
- * cvmx_usbc#_haint
- *
- * Host All Channels Interrupt Register (HAINT)
- *
- * When a significant event occurs on a channel, the Host All Channels Interrupt
- * register interrupts the application using the Host Channels Interrupt bit of
- * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
- * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
- * this register are set and cleared when the application sets and clears bits
- * in the corresponding Host Channel-n Interrupt register.
- */
-union cvmx_usbcx_haint {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_haint_s
-	 * @haint: Channel Interrupts (HAINT)
-	 *	One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15
-	 */
-	struct cvmx_usbcx_haint_s {
-		uint32_t reserved_16_31	: 16;
-		uint32_t haint		: 16;
-	} s;
-};
-typedef union cvmx_usbcx_haint cvmx_usbcx_haint_t;
-
-/**
- * cvmx_usbc#_haintmsk
- *
- * Host All Channels Interrupt Mask Register (HAINTMSK)
- *
- * The Host All Channel Interrupt Mask register works with the Host All Channel
- * Interrupt register to interrupt the application when an event occurs on a
- * channel. There is one interrupt mask bit per channel, up to a maximum of 16
- * bits.
- * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_haintmsk {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_haintmsk_s
-	 * @haintmsk: Channel Interrupt Mask (HAINTMsk)
-	 *	One bit per channel: Bit 0 for channel 0, bit 15 for channel 15
-	 */
-	struct cvmx_usbcx_haintmsk_s {
-		uint32_t reserved_16_31	: 16;
-		uint32_t haintmsk	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_haintmsk cvmx_usbcx_haintmsk_t;
-
-/**
- * cvmx_usbc#_hcchar#
- *
- * Host Channel-n Characteristics Register (HCCHAR)
- *
- */
-union cvmx_usbcx_hccharx {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hccharx_s
-	 * @chena: Channel Enable (ChEna)
-	 *	This field is set by the application and cleared by the OTG
-	 *	host.
-	 *	* 1'b0: Channel disabled
-	 *	* 1'b1: Channel enabled
-	 * @chdis: Channel Disable (ChDis)
-	 *	The application sets this bit to stop transmitting/receiving
-	 *	data on a channel, even before the transfer for that channel is
-	 *	complete. The application must wait for the Channel Disabled
-	 *	interrupt before treating the channel as disabled.
-	 * @oddfrm: Odd Frame (OddFrm)
-	 *	This field is set (reset) by the application to indicate that
-	 *	the OTG host must perform a transfer in an odd (micro)frame.
-	 *	This field is applicable for only periodic (isochronous and
-	 *	interrupt) transactions.
-	 *	* 1'b0: Even (micro)frame
-	 *	* 1'b1: Odd (micro)frame
-	 * @devaddr: Device Address (DevAddr)
-	 *	This field selects the specific device serving as the data
-	 *	source or sink.
-	 * @ec: Multi Count (MC) / Error Count (EC)
-	 *	When the Split Enable bit of the Host Channel-n Split Control
-	 *	register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
-	 *	to the host the number of transactions that should be executed
-	 *	per microframe for this endpoint.
-	 *	* 2'b00: Reserved. This field yields undefined results.
-	 *	* 2'b01: 1 transaction
-	 *	* 2'b10: 2 transactions to be issued for this endpoint per
-	 *	microframe
-	 *	* 2'b11: 3 transactions to be issued for this endpoint per
-	 *	microframe
-	 *	When HCSPLTn.SpltEna is set (1'b1), this field indicates the
-	 *	number of immediate retries to be performed for a periodic split
-	 *	transactions on transaction errors. This field must be set to at
-	 *	least 2'b01.
-	 * @eptype: Endpoint Type (EPType)
-	 *	Indicates the transfer type selected.
-	 *	* 2'b00: Control
-	 *	* 2'b01: Isochronous
-	 *	* 2'b10: Bulk
-	 *	* 2'b11: Interrupt
-	 * @lspddev: Low-Speed Device (LSpdDev)
-	 *	This field is set by the application to indicate that this
-	 *	channel is communicating to a low-speed device.
-	 * @epdir: Endpoint Direction (EPDir)
-	 *	Indicates whether the transaction is IN or OUT.
-	 *	* 1'b0: OUT
-	 *	* 1'b1: IN
-	 * @epnum: Endpoint Number (EPNum)
-	 *	Indicates the endpoint number on the device serving as the
-	 *	data source or sink.
-	 * @mps: Maximum Packet Size (MPS)
-	 *	Indicates the maximum packet size of the associated endpoint.
-	 */
-	struct cvmx_usbcx_hccharx_s {
-		uint32_t chena		: 1;
-		uint32_t chdis		: 1;
-		uint32_t oddfrm		: 1;
-		uint32_t devaddr	: 7;
-		uint32_t ec		: 2;
-		uint32_t eptype		: 2;
-		uint32_t lspddev	: 1;
-		uint32_t reserved_16_16	: 1;
-		uint32_t epdir		: 1;
-		uint32_t epnum		: 4;
-		uint32_t mps		: 11;
-	} s;
-};
-typedef union cvmx_usbcx_hccharx cvmx_usbcx_hccharx_t;
-
-/**
- * cvmx_usbc#_hcfg
- *
- * Host Configuration Register (HCFG)
- *
- * This register configures the core after power-on. Do not make changes to this
- * register after initializing the host.
- */
-union cvmx_usbcx_hcfg {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hcfg_s
-	 * @fslssupp: FS- and LS-Only Support (FSLSSupp)
-	 *	The application uses this bit to control the core's enumeration
-	 *	speed. Using this bit, the application can make the core
-	 *	enumerate as a FS host, even if the connected device supports
-	 *	HS traffic. Do not make changes to this field after initial
-	 *	programming.
-	 *	* 1'b0: HS/FS/LS, based on the maximum speed supported by
-	 *	the connected device
-	 *	* 1'b1: FS/LS-only, even if the connected device can support HS
-	 * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel)
-	 *	When the core is in FS Host mode
-	 *	* 2'b00: PHY clock is running at 30/60 MHz
-	 *	* 2'b01: PHY clock is running at 48 MHz
-	 *	* Others: Reserved
-	 *	When the core is in LS Host mode
-	 *	* 2'b00: PHY clock is running at 30/60 MHz. When the
-	 *	UTMI+/ULPI PHY Low Power mode is not selected, use
-	 *	30/60 MHz.
-	 *	* 2'b01: PHY clock is running at 48 MHz. When the UTMI+
-	 *	PHY Low Power mode is selected, use 48MHz if the PHY
-	 *	supplies a 48 MHz clock during LS mode.
-	 *	* 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
-	 *	use 6 MHz when the UTMI+ PHY Low Power mode is
-	 *	selected and the PHY supplies a 6 MHz clock during LS
-	 *	mode. If you select a 6 MHz clock during LS mode, you must
-	 *	do a soft reset.
-	 *	* 2'b11: Reserved
-	 */
-	struct cvmx_usbcx_hcfg_s {
-		uint32_t reserved_3_31	: 29;
-		uint32_t fslssupp	: 1;
-		uint32_t fslspclksel	: 2;
-	} s;
-};
-typedef union cvmx_usbcx_hcfg cvmx_usbcx_hcfg_t;
-
-/**
- * cvmx_usbc#_hcint#
- *
- * Host Channel-n Interrupt Register (HCINT)
- *
- * This register indicates the status of a channel with respect to USB- and
- * AHB-related events. The application must read this register when the Host
- * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
- * set. Before the application can read this register, it must first read
- * the Host All Channels Interrupt (HAINT) register to get the exact channel
- * number for the Host Channel-n Interrupt register. The application must clear
- * the appropriate bit in this register to clear the corresponding bits in the
- * HAINT and GINTSTS registers.
- */
-union cvmx_usbcx_hcintx {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hcintx_s
-	 * @datatglerr: Data Toggle Error (DataTglErr)
-	 * @frmovrun: Frame Overrun (FrmOvrun)
-	 * @bblerr: Babble Error (BblErr)
-	 * @xacterr: Transaction Error (XactErr)
-	 * @nyet: NYET Response Received Interrupt (NYET)
-	 * @ack: ACK Response Received Interrupt (ACK)
-	 * @nak: NAK Response Received Interrupt (NAK)
-	 * @stall: STALL Response Received Interrupt (STALL)
-	 * @ahberr: This bit is always 0x0.
-	 * @chhltd: Channel Halted (ChHltd)
-	 *	Indicates the transfer completed abnormally either because of
-	 *	any USB transaction error or in response to disable request by
-	 *	the application.
-	 * @xfercompl: Transfer Completed (XferCompl)
-	 *	Transfer completed normally without any errors.
-	 */
-	struct cvmx_usbcx_hcintx_s {
-		uint32_t reserved_11_31	: 21;
-		uint32_t datatglerr	: 1;
-		uint32_t frmovrun	: 1;
-		uint32_t bblerr		: 1;
-		uint32_t xacterr	: 1;
-		uint32_t nyet		: 1;
-		uint32_t ack		: 1;
-		uint32_t nak		: 1;
-		uint32_t stall		: 1;
-		uint32_t ahberr		: 1;
-		uint32_t chhltd		: 1;
-		uint32_t xfercompl	: 1;
-	} s;
-};
-typedef union cvmx_usbcx_hcintx cvmx_usbcx_hcintx_t;
-
-/**
- * cvmx_usbc#_hcintmsk#
- *
- * Host Channel-n Interrupt Mask Register (HCINTMSKn)
- *
- * This register reflects the mask for each channel status described in the
- * previous section.
- * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_hcintmskx {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hcintmskx_s
-	 * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk)
-	 * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk)
-	 * @bblerrmsk: Babble Error Mask (BblErrMsk)
-	 * @xacterrmsk: Transaction Error Mask (XactErrMsk)
-	 * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk)
-	 * @ackmsk: ACK Response Received Interrupt Mask (AckMsk)
-	 * @nakmsk: NAK Response Received Interrupt Mask (NakMsk)
-	 * @stallmsk: STALL Response Received Interrupt Mask (StallMsk)
-	 * @ahberrmsk: AHB Error Mask (AHBErrMsk)
-	 * @chhltdmsk: Channel Halted Mask (ChHltdMsk)
-	 * @xfercomplmsk: Transfer Completed Mask (XferComplMsk)
-	 */
-	struct cvmx_usbcx_hcintmskx_s {
-		uint32_t reserved_11_31	: 21;
-		uint32_t datatglerrmsk	: 1;
-		uint32_t frmovrunmsk	: 1;
-		uint32_t bblerrmsk	: 1;
-		uint32_t xacterrmsk	: 1;
-		uint32_t nyetmsk	: 1;
-		uint32_t ackmsk		: 1;
-		uint32_t nakmsk		: 1;
-		uint32_t stallmsk	: 1;
-		uint32_t ahberrmsk	: 1;
-		uint32_t chhltdmsk	: 1;
-		uint32_t xfercomplmsk	: 1;
-	} s;
-};
-typedef union cvmx_usbcx_hcintmskx cvmx_usbcx_hcintmskx_t;
-
-/**
- * cvmx_usbc#_hcsplt#
- *
- * Host Channel-n Split Control Register (HCSPLT)
- *
- */
-union cvmx_usbcx_hcspltx {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hcspltx_s
-	 * @spltena: Split Enable (SpltEna)
-	 *	The application sets this field to indicate that this channel is
-	 *	enabled to perform split transactions.
-	 * @compsplt: Do Complete Split (CompSplt)
-	 *	The application sets this field to request the OTG host to
-	 *	perform a complete split transaction.
-	 * @xactpos: Transaction Position (XactPos)
-	 *	This field is used to determine whether to send all, first,
-	 *	middle, or last payloads with each OUT transaction.
-	 *	* 2'b11: All. This is the entire data payload is of this
-	 *	transaction (which is less than or equal to 188 bytes).
-	 *	* 2'b10: Begin. This is the first data payload of this
-	 *	transaction (which is larger than 188 bytes).
-	 *	* 2'b00: Mid. This is the middle payload of this transaction
-	 *	(which is larger than 188 bytes).
-	 *	* 2'b01: End. This is the last payload of this transaction
-	 *	(which is larger than 188 bytes).
-	 * @hubaddr: Hub Address (HubAddr)
-	 *	This field holds the device address of the transaction
-	 *	translator's hub.
-	 * @prtaddr: Port Address (PrtAddr)
-	 *	This field is the port number of the recipient transaction
-	 *	translator.
-	 */
-	struct cvmx_usbcx_hcspltx_s {
-		uint32_t spltena	: 1;
-		uint32_t reserved_17_30	: 14;
-		uint32_t compsplt	: 1;
-		uint32_t xactpos	: 2;
-		uint32_t hubaddr	: 7;
-		uint32_t prtaddr	: 7;
-	} s;
-};
-typedef union cvmx_usbcx_hcspltx cvmx_usbcx_hcspltx_t;
-
-/**
- * cvmx_usbc#_hctsiz#
- *
- * Host Channel-n Transfer Size Register (HCTSIZ)
- *
- */
-union cvmx_usbcx_hctsizx {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hctsizx_s
-	 * @dopng: Do Ping (DoPng)
-	 *	Setting this field to 1 directs the host to do PING protocol.
-	 * @pid: PID (Pid)
-	 *	The application programs this field with the type of PID to use
-	 *	for the initial transaction. The host will maintain this field
-	 *	for the rest of the transfer.
-	 *	* 2'b00: DATA0
-	 *	* 2'b01: DATA2
-	 *	* 2'b10: DATA1
-	 *	* 2'b11: MDATA (non-control)/SETUP (control)
-	 * @pktcnt: Packet Count (PktCnt)
-	 *	This field is programmed by the application with the expected
-	 *	number of packets to be transmitted (OUT) or received (IN).
-	 *	The host decrements this count on every successful
-	 *	transmission or reception of an OUT/IN packet. Once this count
-	 *	reaches zero, the application is interrupted to indicate normal
-	 *	completion.
-	 * @xfersize: Transfer Size (XferSize)
-	 *	For an OUT, this field is the number of data bytes the host will
-	 *	send during the transfer.
-	 *	For an IN, this field is the buffer size that the application
-	 *	has reserved for the transfer. The application is expected to
-	 *	program this field as an integer multiple of the maximum packet
-	 *	size for IN transactions (periodic and non-periodic).
-	 */
-	struct cvmx_usbcx_hctsizx_s {
-		uint32_t dopng		: 1;
-		uint32_t pid		: 2;
-		uint32_t pktcnt		: 10;
-		uint32_t xfersize	: 19;
-	} s;
-};
-typedef union cvmx_usbcx_hctsizx cvmx_usbcx_hctsizx_t;
-
-/**
- * cvmx_usbc#_hfir
- *
- * Host Frame Interval Register (HFIR)
- *
- * This register stores the frame interval information for the current speed to
- * which the O2P USB core has enumerated.
- */
-union cvmx_usbcx_hfir {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hfir_s
-	 * @frint: Frame Interval (FrInt)
-	 *	The value that the application programs to this field specifies
-	 *	the interval between two consecutive SOFs (FS) or micro-
-	 *	SOFs (HS) or Keep-Alive tokens (HS). This field contains the
-	 *	number of PHY clocks that constitute the required frame
-	 *	interval. The default value set in this field for a FS operation
-	 *	when the PHY clock frequency is 60 MHz. The application can
-	 *	write a value to this register only after the Port Enable bit of
-	 *	the Host Port Control and Status register (HPRT.PrtEnaPort)
-	 *	has been set. If no value is programmed, the core calculates
-	 *	the value based on the PHY clock specified in the FS/LS PHY
-	 *	Clock Select field of the Host Configuration register
-	 *	(HCFG.FSLSPclkSel). Do not change the value of this field
-	 *	after the initial configuration.
-	 *	* 125 us (PHY clock frequency for HS)
-	 *	* 1 ms (PHY clock frequency for FS/LS)
-	 */
-	struct cvmx_usbcx_hfir_s {
-		uint32_t reserved_16_31	: 16;
-		uint32_t frint		: 16;
-	} s;
-};
-typedef union cvmx_usbcx_hfir cvmx_usbcx_hfir_t;
-
-/**
- * cvmx_usbc#_hfnum
- *
- * Host Frame Number/Frame Time Remaining Register (HFNUM)
- *
- * This register indicates the current frame number.
- * It also indicates the time remaining (in terms of the number of PHY clocks)
- * in the current (micro)frame.
- */
-union cvmx_usbcx_hfnum {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hfnum_s
-	 * @frrem: Frame Time Remaining (FrRem)
-	 *	Indicates the amount of time remaining in the current
-	 *	microframe (HS) or frame (FS/LS), in terms of PHY clocks.
-	 *	This field decrements on each PHY clock. When it reaches
-	 *	zero, this field is reloaded with the value in the Frame
-	 *	Interval register and a new SOF is transmitted on the USB.
-	 * @frnum: Frame Number (FrNum)
-	 *	This field increments when a new SOF is transmitted on the
-	 *	USB, and is reset to 0 when it reaches 16'h3FFF.
-	 */
-	struct cvmx_usbcx_hfnum_s {
-		uint32_t frrem	: 16;
-		uint32_t frnum	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_hfnum cvmx_usbcx_hfnum_t;
-
-/**
- * cvmx_usbc#_hprt
- *
- * Host Port Control and Status Register (HPRT)
- *
- * This register is available in both Host and Device modes.
- * Currently, the OTG Host supports only one port.
- * A single register holds USB port-related information such as USB reset,
- * enable, suspend, resume, connect status, and test mode for each port. The
- * R_SS_WC bits in this register can trigger an interrupt to the application
- * through the Host Port Interrupt bit of the Core Interrupt register
- * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
- * register and clear the bit that caused the interrupt. For the R_SS_WC bits,
- * the application must write a 1 to the bit to clear the interrupt.
- */
-union cvmx_usbcx_hprt {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hprt_s
-	 * @prtspd: Port Speed (PrtSpd)
-	 *	Indicates the speed of the device attached to this port.
-	 *	* 2'b00: High speed
-	 *	* 2'b01: Full speed
-	 *	* 2'b10: Low speed
-	 *	* 2'b11: Reserved
-	 * @prttstctl: Port Test Control (PrtTstCtl)
-	 *	The application writes a nonzero value to this field to put
-	 *	the port into a Test mode, and the corresponding pattern is
-	 *	signaled on the port.
-	 *	* 4'b0000: Test mode disabled
-	 *	* 4'b0001: Test_J mode
-	 *	* 4'b0010: Test_K mode
-	 *	* 4'b0011: Test_SE0_NAK mode
-	 *	* 4'b0100: Test_Packet mode
-	 *	* 4'b0101: Test_Force_Enable
-	 *	* Others: Reserved
-	 *	PrtSpd must be zero (i.e. the interface must be in high-speed
-	 *	mode) to use the PrtTstCtl test modes.
-	 * @prtpwr: Port Power (PrtPwr)
-	 *	The application uses this field to control power to this port,
-	 *	and the core clears this bit on an overcurrent condition.
-	 *	* 1'b0: Power off
-	 *	* 1'b1: Power on
-	 * @prtlnsts: Port Line Status (PrtLnSts)
-	 *	Indicates the current logic level USB data lines
-	 *	* Bit [10]: Logic level of D-
-	 *	* Bit [11]: Logic level of D+
-	 * @prtrst: Port Reset (PrtRst)
-	 *	When the application sets this bit, a reset sequence is
-	 *	started on this port. The application must time the reset
-	 *	period and clear this bit after the reset sequence is
-	 *	complete.
-	 *	* 1'b0: Port not in reset
-	 *	* 1'b1: Port in reset
-	 *	The application must leave this bit set for at least a
-	 *	minimum duration mentioned below to start a reset on the
-	 *	port. The application can leave it set for another 10 ms in
-	 *	addition to the required minimum duration, before clearing
-	 *	the bit, even though there is no maximum limit set by the
-	 *	USB standard.
-	 *	* High speed: 50 ms
-	 *	* Full speed/Low speed: 10 ms
-	 * @prtsusp: Port Suspend (PrtSusp)
-	 *	The application sets this bit to put this port in Suspend
-	 *	mode. The core only stops sending SOFs when this is set.
-	 *	To stop the PHY clock, the application must set the Port
-	 *	Clock Stop bit, which will assert the suspend input pin of
-	 *	the PHY.
-	 *	The read value of this bit reflects the current suspend
-	 *	status of the port. This bit is cleared by the core after a
-	 *	remote wakeup signal is detected or the application sets
-	 *	the Port Reset bit or Port Resume bit in this register or the
-	 *	Resume/Remote Wakeup Detected Interrupt bit or
-	 *	Disconnect Detected Interrupt bit in the Core Interrupt
-	 *	register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
-	 *	respectively).
-	 *	* 1'b0: Port not in Suspend mode
-	 *	* 1'b1: Port in Suspend mode
-	 * @prtres: Port Resume (PrtRes)
-	 *	The application sets this bit to drive resume signaling on
-	 *	the port. The core continues to drive the resume signal
-	 *	until the application clears this bit.
-	 *	If the core detects a USB remote wakeup sequence, as
-	 *	indicated by the Port Resume/Remote Wakeup Detected
-	 *	Interrupt bit of the Core Interrupt register
-	 *	(GINTSTS.WkUpInt), the core starts driving resume
-	 *	signaling without application intervention and clears this bit
-	 *	when it detects a disconnect condition. The read value of
-	 *	this bit indicates whether the core is currently driving
-	 *	resume signaling.
-	 *	* 1'b0: No resume driven
-	 *	* 1'b1: Resume driven
-	 * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng)
-	 *	The core sets this bit when the status of the Port
-	 *	Overcurrent Active bit (bit 4) in this register changes.
-	 * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct)
-	 *	Indicates the overcurrent condition of the port.
-	 *	* 1'b0: No overcurrent condition
-	 *	* 1'b1: Overcurrent condition
-	 * @prtenchng: Port Enable/Disable Change (PrtEnChng)
-	 *	The core sets this bit when the status of the Port Enable bit
-	 *	[2] of this register changes.
-	 * @prtena: Port Enable (PrtEna)
-	 *	A port is enabled only by the core after a reset sequence,
-	 *	and is disabled by an overcurrent condition, a disconnect
-	 *	condition, or by the application clearing this bit. The
-	 *	application cannot set this bit by a register write. It can only
-	 *	clear it to disable the port. This bit does not trigger any
-	 *	interrupt to the application.
-	 *	* 1'b0: Port disabled
-	 *	* 1'b1: Port enabled
-	 * @prtconndet: Port Connect Detected (PrtConnDet)
-	 *	The core sets this bit when a device connection is detected
-	 *	to trigger an interrupt to the application using the Host Port
-	 *	Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
-	 *	The application must write a 1 to this bit to clear the
-	 *	interrupt.
-	 * @prtconnsts: Port Connect Status (PrtConnSts)
-	 *	* 0: No device is attached to the port.
-	 *	* 1: A device is attached to the port.
-	 */
-	struct cvmx_usbcx_hprt_s {
-		uint32_t reserved_19_31	: 13;
-		uint32_t prtspd		: 2;
-		uint32_t prttstctl	: 4;
-		uint32_t prtpwr		: 1;
-		uint32_t prtlnsts	: 2;
-		uint32_t reserved_9_9	: 1;
-		uint32_t prtrst		: 1;
-		uint32_t prtsusp	: 1;
-		uint32_t prtres		: 1;
-		uint32_t prtovrcurrchng	: 1;
-		uint32_t prtovrcurract	: 1;
-		uint32_t prtenchng	: 1;
-		uint32_t prtena		: 1;
-		uint32_t prtconndet	: 1;
-		uint32_t prtconnsts	: 1;
-	} s;
-};
-typedef union cvmx_usbcx_hprt cvmx_usbcx_hprt_t;
-
-/**
- * cvmx_usbc#_hptxfsiz
- *
- * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
- *
- * This register holds the size and the memory start address of the Periodic
- * TxFIFO, as shown in Figures 310 and 311.
- */
-union cvmx_usbcx_hptxfsiz {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hptxfsiz_s
-	 * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 16
-	 *	* Maximum value is 32768
-	 * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr)
-	 */
-	struct cvmx_usbcx_hptxfsiz_s {
-		uint32_t ptxfsize	: 16;
-		uint32_t ptxfstaddr	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_hptxfsiz cvmx_usbcx_hptxfsiz_t;
-
-/**
- * cvmx_usbc#_hptxsts
- *
- * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
- *
- * This read-only register contains the free space information for the Periodic
- * TxFIFO and the Periodic Transmit Request Queue
- */
-union cvmx_usbcx_hptxsts {
-	uint32_t u32;
-	/**
-	 * struct cvmx_usbcx_hptxsts_s
-	 * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop)
-	 *	This indicates the entry in the Periodic Tx Request Queue that
-	 *	is currently being processes by the MAC.
-	 *	This register is used for debugging.
-	 *	* Bit [31]: Odd/Even (micro)frame
-	 *	- 1'b0: send in even (micro)frame
-	 *	- 1'b1: send in odd (micro)frame
-	 *	* Bits [30:27]: Channel/endpoint number
-	 *	* Bits [26:25]: Type
-	 *	- 2'b00: IN/OUT
-	 *	- 2'b01: Zero-length packet
-	 *	- 2'b10: CSPLIT
-	 *	- 2'b11: Disable channel command
-	 *	* Bit [24]: Terminate (last entry for the selected
-	 *	channel/endpoint)
-	 * @ptxqspcavail: Periodic Transmit Request Queue Space Available
-	 *	(PTxQSpcAvail)
-	 *	Indicates the number of free locations available to be written
-	 *	in the Periodic Transmit Request Queue. This queue holds both
-	 *	IN and OUT requests.
-	 *	* 8'h0: Periodic Transmit Request Queue is full
-	 *	* 8'h1: 1 location available
-	 *	* 8'h2: 2 locations available
-	 *	* n: n locations available (0..8)
-	 *	* Others: Reserved
-	 * @ptxfspcavail: Periodic Transmit Data FIFO Space Available
-	 *		  (PTxFSpcAvail)
-	 *	Indicates the number of free locations available to be written
-	 *	to in the Periodic TxFIFO.
-	 *	Values are in terms of 32-bit words
-	 *	* 16'h0: Periodic TxFIFO is full
-	 *	* 16'h1: 1 word available
-	 *	* 16'h2: 2 words available
-	 *	* 16'hn: n words available (where 0..32768)
-	 *	* 16'h8000: 32768 words available
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_hptxsts_s {
-		uint32_t ptxqtop	: 8;
-		uint32_t ptxqspcavail	: 8;
-		uint32_t ptxfspcavail	: 16;
-	} s;
-};
-typedef union cvmx_usbcx_hptxsts cvmx_usbcx_hptxsts_t;
-
-#endif
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbnx-defs.h b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
deleted file mode 100644
index 96d706770f..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
+++ /dev/null
@@ -1,887 +0,0 @@
-/***********************license start***************
- * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
-
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
-
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import  regulations in other
- * countries.
-
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- ***********************license end**************************************/
-
-
-/**
- * cvmx-usbnx-defs.h
- *
- * Configuration and status register (CSR) type definitions for
- * Octeon usbnx.
- *
- */
-#ifndef __CVMX_USBNX_TYPEDEFS_H__
-#define __CVMX_USBNX_TYPEDEFS_H__
-
-#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
-#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
-
-#define CVMX_USBNXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
-#define CVMX_USBNXREG2(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
-
-#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
-#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
-#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
-#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
-
-/**
- * cvmx_usbn#_clk_ctl
- *
- * USBN_CLK_CTL = USBN's Clock Control
- *
- * This register is used to control the frequency of the hclk and the
- * hreset and phy_rst signals.
- */
-union cvmx_usbnx_clk_ctl {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_s
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_s {
-		uint64_t reserved_20_63	: 44;
-		uint64_t divide2	: 2;
-		uint64_t hclk_rst	: 1;
-		uint64_t p_x_on		: 1;
-		uint64_t reserved_14_15	: 2;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} s;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_cn30xx
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_rclk: Phy refrence clock enable.
-	 *	'1' The PHY PLL uses the XO block output as a
-	 *	reference.
-	 *	'0' Reserved.
-	 * @p_xenbn: Phy external clock enable.
-	 *	'1' The XO block uses the clock from a crystal.
-	 *	'0' The XO block uses an external clock supplied
-	 *	on the XO pin. USB_XI should be tied to
-	 *	ground for this usage.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz
-	 *	'01': 24 MHz
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk. The eclk will be divided by the
-	 *	value of this field +1 to determine the hclk
-	 *	frequency. (Also see HRST of this register).
-	 *	The hclk frequency must be less than 125 MHz.
-	 */
-	struct cvmx_usbnx_clk_ctl_cn30xx {
-		uint64_t reserved_18_63	: 46;
-		uint64_t hclk_rst	: 1;
-		uint64_t p_x_on		: 1;
-		uint64_t p_rclk		: 1;
-		uint64_t p_xenbn	: 1;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} cn30xx;
-	struct cvmx_usbnx_clk_ctl_cn30xx cn31xx;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_cn50xx
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_rtype: PHY reference clock type
-	 *	'0' The USB-PHY uses a 12MHz crystal as a clock
-	 *	source at the USB_XO and USB_XI pins
-	 *	'1' Reserved
-	 *	'2' The USB_PHY uses 12/24/48MHz 2.5V board clock
-	 *	at the USB_XO pin. USB_XI should be tied to
-	 *	ground in this case.
-	 *	'3' Reserved
-	 *	(bit 14 was P_XENBN on 3xxx)
-	 *	(bit 15 was P_RCLK on 3xxx)
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_cn50xx {
-		uint64_t reserved_20_63	: 44;
-		uint64_t divide2	: 2;
-		uint64_t hclk_rst	: 1;
-		uint64_t reserved_16_16 : 1;
-		uint64_t p_rtype	: 2;
-		uint64_t p_com_on	: 1;
-		uint64_t p_c_sel	: 2;
-		uint64_t cdiv_byp	: 1;
-		uint64_t sd_mode	: 2;
-		uint64_t s_bist		: 1;
-		uint64_t por		: 1;
-		uint64_t enable		: 1;
-		uint64_t prst		: 1;
-		uint64_t hrst		: 1;
-		uint64_t divide		: 3;
-	} cn50xx;
-	struct cvmx_usbnx_clk_ctl_cn50xx cn52xx;
-	struct cvmx_usbnx_clk_ctl_cn50xx cn56xx;
-};
-typedef union cvmx_usbnx_clk_ctl cvmx_usbnx_clk_ctl_t;
-
-/**
- * cvmx_usbn#_usbp_ctl_status
- *
- * USBN_USBP_CTL_STATUS = USBP Control And Status Register
- *
- * Contains general control and status information for the USBN block.
- */
-union cvmx_usbnx_usbp_ctl_status {
-	uint64_t u64;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_s
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_s {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t siddq			: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t tuning			: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} s;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn30xx
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn30xx {
-		uint64_t reserved_38_63	: 26;
-		uint64_t bist_done	: 1;
-		uint64_t bist_err	: 1;
-		uint64_t tdata_out	: 4;
-		uint64_t reserved_30_31	: 2;
-		uint64_t dma_bmode	: 1;
-		uint64_t usbc_end	: 1;
-		uint64_t usbp_bist	: 1;
-		uint64_t tclk		: 1;
-		uint64_t dp_pulld	: 1;
-		uint64_t dm_pulld	: 1;
-		uint64_t hst_mode	: 1;
-		uint64_t tuning		: 4;
-		uint64_t tx_bs_enh	: 1;
-		uint64_t tx_bs_en	: 1;
-		uint64_t loop_enb	: 1;
-		uint64_t vtest_enb	: 1;
-		uint64_t bist_enb	: 1;
-		uint64_t tdata_sel	: 1;
-		uint64_t taddr_in	: 4;
-		uint64_t tdata_in	: 8;
-		uint64_t ate_reset	: 1;
-	} cn30xx;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn50xx
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn50xx {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t reserved_31_31		: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t reserved_19_22		: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} cn50xx;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_cn52xx
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internaly generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal opeartion.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internaly generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-eanable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_cn52xx {
-		uint64_t txrisetune		: 1;
-		uint64_t txvreftune		: 4;
-		uint64_t txfslstune		: 4;
-		uint64_t txhsxvtune		: 2;
-		uint64_t sqrxtune		: 3;
-		uint64_t compdistune		: 3;
-		uint64_t otgtune		: 3;
-		uint64_t otgdisable		: 1;
-		uint64_t portreset		: 1;
-		uint64_t drvvbus		: 1;
-		uint64_t lsbist			: 1;
-		uint64_t fsbist			: 1;
-		uint64_t hsbist			: 1;
-		uint64_t bist_done		: 1;
-		uint64_t bist_err		: 1;
-		uint64_t tdata_out		: 4;
-		uint64_t siddq			: 1;
-		uint64_t txpreemphasistune	: 1;
-		uint64_t dma_bmode		: 1;
-		uint64_t usbc_end		: 1;
-		uint64_t usbp_bist		: 1;
-		uint64_t tclk			: 1;
-		uint64_t dp_pulld		: 1;
-		uint64_t dm_pulld		: 1;
-		uint64_t hst_mode		: 1;
-		uint64_t reserved_19_22		: 4;
-		uint64_t tx_bs_enh		: 1;
-		uint64_t tx_bs_en		: 1;
-		uint64_t loop_enb		: 1;
-		uint64_t vtest_enb		: 1;
-		uint64_t bist_enb		: 1;
-		uint64_t tdata_sel		: 1;
-		uint64_t taddr_in		: 4;
-		uint64_t tdata_in		: 8;
-		uint64_t ate_reset		: 1;
-	} cn52xx;
-};
-typedef union cvmx_usbnx_usbp_ctl_status cvmx_usbnx_usbp_ctl_status_t;
-
-#endif
diff --git a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/octeon-hcd.c b/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/octeon-hcd.c
deleted file mode 100644
index d156b603ae..0000000000
--- a/target/linux/octeon/files-3.10/drivers/staging/octeon-usb/octeon-hcd.c
+++ /dev/null
@@ -1,832 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/usb.h>
-
-#include <linux/time.h>
-#include <linux/delay.h>
-
-#include <asm/octeon/cvmx.h>
-#include "cvmx-usb.h"
-#include <asm/octeon/cvmx-iob-defs.h>
-
-#include <linux/usb/hcd.h>
-
-#include <linux/err.h>
-
-struct octeon_hcd {
-	spinlock_t lock;
-	cvmx_usb_state_t usb;
-	struct tasklet_struct dequeue_tasklet;
-	struct list_head dequeue_list;
-};
-
-/* convert between an HCD pointer and the corresponding struct octeon_hcd */
-static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
-{
-	return (struct octeon_hcd *)(hcd->hcd_priv);
-}
-
-static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
-{
-	return container_of((void *)p, struct usb_hcd, hcd_priv);
-}
-
-static inline struct octeon_hcd *cvmx_usb_to_octeon(cvmx_usb_state_t *p)
-{
-	return container_of(p, struct octeon_hcd, usb);
-}
-
-static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_poll(&priv->usb);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void octeon_usb_port_callback(cvmx_usb_state_t *usb,
-				     cvmx_usb_callback_t reason,
-				     cvmx_usb_complete_t status,
-				     int pipe_handle,
-				     int submit_handle,
-				     int bytes_transferred,
-				     void *user_data)
-{
-	struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
-
-	spin_unlock(&priv->lock);
-	usb_hcd_poll_rh_status(octeon_to_hcd(priv));
-	spin_lock(&priv->lock);
-}
-
-static int octeon_usb_start(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	hcd->state = HC_STATE_RUNNING;
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
-				   octeon_usb_port_callback, NULL);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return 0;
-}
-
-static void octeon_usb_stop(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
-				   NULL, NULL);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	hcd->state = HC_STATE_HALT;
-}
-
-static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-
-	return cvmx_usb_get_frame_number(&priv->usb);
-}
-
-static void octeon_usb_urb_complete_callback(cvmx_usb_state_t *usb,
-					     cvmx_usb_callback_t reason,
-					     cvmx_usb_complete_t status,
-					     int pipe_handle,
-					     int submit_handle,
-					     int bytes_transferred,
-					     void *user_data)
-{
-	struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
-	struct usb_hcd *hcd = octeon_to_hcd(priv);
-	struct device *dev = hcd->self.controller;
-	struct urb *urb = user_data;
-
-	urb->actual_length = bytes_transferred;
-	urb->hcpriv = NULL;
-
-	if (!list_empty(&urb->urb_list)) {
-		/*
-		 * It is on the dequeue_list, but we are going to call
-		 * usb_hcd_giveback_urb(), so we must clear it from
-		 * the list.  We got to it before the
-		 * octeon_usb_urb_dequeue_work() tasklet did.
-		 */
-		list_del(&urb->urb_list);
-		/* No longer on the dequeue_list. */
-		INIT_LIST_HEAD(&urb->urb_list);
-	}
-
-	/* For Isochronous transactions we need to update the URB packet status
-	   list from data in our private copy */
-	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-		int i;
-		/*
-		 * The pointer to the private list is stored in the setup_packet
-		 * field.
-		 */
-		cvmx_usb_iso_packet_t *iso_packet = (cvmx_usb_iso_packet_t *) urb->setup_packet;
-		/* Recalculate the transfer size by adding up each packet */
-		urb->actual_length = 0;
-		for (i = 0; i < urb->number_of_packets; i++) {
-			if (iso_packet[i].status == CVMX_USB_COMPLETE_SUCCESS) {
-				urb->iso_frame_desc[i].status = 0;
-				urb->iso_frame_desc[i].actual_length = iso_packet[i].length;
-				urb->actual_length += urb->iso_frame_desc[i].actual_length;
-			} else {
-				dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%d submit=%d size=%d\n",
-					i, urb->number_of_packets,
-					iso_packet[i].status, pipe_handle,
-					submit_handle, iso_packet[i].length);
-				urb->iso_frame_desc[i].status = -EREMOTEIO;
-			}
-		}
-		/* Free the private list now that we don't need it anymore */
-		kfree(iso_packet);
-		urb->setup_packet = NULL;
-	}
-
-	switch (status) {
-	case CVMX_USB_COMPLETE_SUCCESS:
-		urb->status = 0;
-		break;
-	case CVMX_USB_COMPLETE_CANCEL:
-		if (urb->status == 0)
-			urb->status = -ENOENT;
-		break;
-	case CVMX_USB_COMPLETE_STALL:
-		dev_dbg(dev, "status=stall pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
-		urb->status = -EPIPE;
-		break;
-	case CVMX_USB_COMPLETE_BABBLEERR:
-		dev_dbg(dev, "status=babble pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
-		urb->status = -EPIPE;
-		break;
-	case CVMX_USB_COMPLETE_SHORT:
-		dev_dbg(dev, "status=short pipe=%d submit=%d size=%d\n",
-			pipe_handle, submit_handle, bytes_transferred);
-		urb->status = -EREMOTEIO;
-		break;
-	case CVMX_USB_COMPLETE_ERROR:
-	case CVMX_USB_COMPLETE_XACTERR:
-	case CVMX_USB_COMPLETE_DATATGLERR:
-	case CVMX_USB_COMPLETE_FRAMEERR:
-		dev_dbg(dev, "status=%d pipe=%d submit=%d size=%d\n",
-			status, pipe_handle, submit_handle, bytes_transferred);
-		urb->status = -EPROTO;
-		break;
-	}
-	spin_unlock(&priv->lock);
-	usb_hcd_giveback_urb(octeon_to_hcd(priv), urb, urb->status);
-	spin_lock(&priv->lock);
-}
-
-static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
-				  struct urb *urb,
-				  gfp_t mem_flags)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	struct device *dev = hcd->self.controller;
-	int submit_handle = -1;
-	int pipe_handle;
-	unsigned long flags;
-	cvmx_usb_iso_packet_t *iso_packet;
-	struct usb_host_endpoint *ep = urb->ep;
-
-	urb->status = 0;
-	INIT_LIST_HEAD(&urb->urb_list);	/* not enqueued on dequeue_list */
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (!ep->hcpriv) {
-		cvmx_usb_transfer_t transfer_type;
-		cvmx_usb_speed_t speed;
-		int split_device = 0;
-		int split_port = 0;
-		switch (usb_pipetype(urb->pipe)) {
-		case PIPE_ISOCHRONOUS:
-			transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
-			break;
-		case PIPE_INTERRUPT:
-			transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
-			break;
-		case PIPE_CONTROL:
-			transfer_type = CVMX_USB_TRANSFER_CONTROL;
-			break;
-		default:
-			transfer_type = CVMX_USB_TRANSFER_BULK;
-			break;
-		}
-		switch (urb->dev->speed) {
-		case USB_SPEED_LOW:
-			speed = CVMX_USB_SPEED_LOW;
-			break;
-		case USB_SPEED_FULL:
-			speed = CVMX_USB_SPEED_FULL;
-			break;
-		default:
-			speed = CVMX_USB_SPEED_HIGH;
-			break;
-		}
-		/*
-		 * For slow devices on high speed ports we need to find the hub
-		 * that does the speed translation so we know where to send the
-		 * split transactions.
-		 */
-		if (speed != CVMX_USB_SPEED_HIGH) {
-			/*
-			 * Start at this device and work our way up the usb
-			 * tree.
-			 */
-			struct usb_device *dev = urb->dev;
-			while (dev->parent) {
-				/*
-				 * If our parent is high speed then he'll
-				 * receive the splits.
-				 */
-				if (dev->parent->speed == USB_SPEED_HIGH) {
-					split_device = dev->parent->devnum;
-					split_port = dev->portnum;
-					break;
-				}
-				/*
-				 * Move up the tree one level. If we make it all
-				 * the way up the tree, then the port must not
-				 * be in high speed mode and we don't need a
-				 * split.
-				 */
-				dev = dev->parent;
-			}
-		}
-		pipe_handle = cvmx_usb_open_pipe(&priv->usb,
-						 0,
-						 usb_pipedevice(urb->pipe),
-						 usb_pipeendpoint(urb->pipe),
-						 speed,
-						 le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
-						 transfer_type,
-						 usb_pipein(urb->pipe) ? CVMX_USB_DIRECTION_IN : CVMX_USB_DIRECTION_OUT,
-						 urb->interval,
-						 (le16_to_cpu(ep->desc.wMaxPacketSize) >> 11) & 0x3,
-						 split_device,
-						 split_port);
-		if (pipe_handle < 0) {
-			spin_unlock_irqrestore(&priv->lock, flags);
-			dev_dbg(dev, "Failed to create pipe\n");
-			return -ENOMEM;
-		}
-		ep->hcpriv = (void *)(0x10000L + pipe_handle);
-	} else {
-		pipe_handle = 0xffff & (long)ep->hcpriv;
-	}
-
-	switch (usb_pipetype(urb->pipe)) {
-	case PIPE_ISOCHRONOUS:
-		dev_dbg(dev, "Submit isochronous to %d.%d\n",
-			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		/*
-		 * Allocate a structure to use for our private list of
-		 * isochronous packets.
-		 */
-		iso_packet = kmalloc(urb->number_of_packets * sizeof(cvmx_usb_iso_packet_t), GFP_ATOMIC);
-		if (iso_packet) {
-			int i;
-			/* Fill the list with the data from the URB */
-			for (i = 0; i < urb->number_of_packets; i++) {
-				iso_packet[i].offset = urb->iso_frame_desc[i].offset;
-				iso_packet[i].length = urb->iso_frame_desc[i].length;
-				iso_packet[i].status = CVMX_USB_COMPLETE_ERROR;
-			}
-			/*
-			 * Store a pointer to the list in the URB setup_packet
-			 * field. We know this currently isn't being used and
-			 * this saves us a bunch of logic.
-			 */
-			urb->setup_packet = (char *)iso_packet;
-			submit_handle = cvmx_usb_submit_isochronous(&priv->usb, pipe_handle,
-							urb->start_frame,
-							0 /* flags */ ,
-							urb->number_of_packets,
-							iso_packet,
-							urb->transfer_dma,
-							urb->transfer_buffer_length,
-							octeon_usb_urb_complete_callback,
-							urb);
-			/*
-			 * If submit failed we need to free our private packet
-			 * list.
-			 */
-			if (submit_handle < 0) {
-				urb->setup_packet = NULL;
-				kfree(iso_packet);
-			}
-		}
-		break;
-	case PIPE_INTERRUPT:
-		dev_dbg(dev, "Submit interrupt to %d.%d\n",
-			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_interrupt(&priv->usb, pipe_handle,
-					      urb->transfer_dma,
-					      urb->transfer_buffer_length,
-					      octeon_usb_urb_complete_callback,
-					      urb);
-		break;
-	case PIPE_CONTROL:
-		dev_dbg(dev, "Submit control to %d.%d\n",
-			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_control(&priv->usb, pipe_handle,
-					    urb->setup_dma,
-					    urb->transfer_dma,
-					    urb->transfer_buffer_length,
-					    octeon_usb_urb_complete_callback,
-					    urb);
-		break;
-	case PIPE_BULK:
-		dev_dbg(dev, "Submit bulk to %d.%d\n",
-			usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
-		submit_handle = cvmx_usb_submit_bulk(&priv->usb, pipe_handle,
-					 urb->transfer_dma,
-					 urb->transfer_buffer_length,
-					 octeon_usb_urb_complete_callback,
-					 urb);
-		break;
-	}
-	if (submit_handle < 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dev_dbg(dev, "Failed to submit\n");
-		return -ENOMEM;
-	}
-	urb->hcpriv = (void *)(long)(((submit_handle & 0xffff) << 16) | pipe_handle);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return 0;
-}
-
-static void octeon_usb_urb_dequeue_work(unsigned long arg)
-{
-	unsigned long flags;
-	struct octeon_hcd *priv = (struct octeon_hcd *)arg;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	while (!list_empty(&priv->dequeue_list)) {
-		int pipe_handle;
-		int submit_handle;
-		struct urb *urb = container_of(priv->dequeue_list.next, struct urb, urb_list);
-		list_del(&urb->urb_list);
-		/* not enqueued on dequeue_list */
-		INIT_LIST_HEAD(&urb->urb_list);
-		pipe_handle = 0xffff & (long)urb->hcpriv;
-		submit_handle = ((long)urb->hcpriv) >> 16;
-		cvmx_usb_cancel(&priv->usb, pipe_handle, submit_handle);
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int octeon_usb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	if (!urb->dev)
-		return -EINVAL;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	urb->status = status;
-	list_add_tail(&urb->urb_list, &priv->dequeue_list);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	tasklet_schedule(&priv->dequeue_tasklet);
-
-	return 0;
-}
-
-static void octeon_usb_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
-{
-	struct device *dev = hcd->self.controller;
-
-	if (ep->hcpriv) {
-		struct octeon_hcd *priv = hcd_to_octeon(hcd);
-		int pipe_handle = 0xffff & (long)ep->hcpriv;
-		unsigned long flags;
-		spin_lock_irqsave(&priv->lock, flags);
-		cvmx_usb_cancel_all(&priv->usb, pipe_handle);
-		if (cvmx_usb_close_pipe(&priv->usb, pipe_handle))
-			dev_dbg(dev, "Closing pipe %d failed\n", pipe_handle);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		ep->hcpriv = NULL;
-	}
-}
-
-static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	cvmx_usb_port_status_t port_status;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	port_status = cvmx_usb_get_status(&priv->usb);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	buf[0] = 0;
-	buf[0] = port_status.connect_change << 1;
-
-	return (buf[0] != 0);
-}
-
-static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
-{
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	struct device *dev = hcd->self.controller;
-	cvmx_usb_port_status_t usb_port_status;
-	int port_status;
-	struct usb_hub_descriptor *desc;
-	unsigned long flags;
-
-	switch (typeReq) {
-	case ClearHubFeature:
-		dev_dbg(dev, "ClearHubFeature\n");
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-		case C_HUB_OVER_CURRENT:
-			/* Nothing required here */
-			break;
-		default:
-			return -EINVAL;
-		}
-		break;
-	case ClearPortFeature:
-		dev_dbg(dev, "ClearPortFeature\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			dev_dbg(dev, " ENABLE\n");
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_disable(&priv->usb);
-			spin_unlock_irqrestore(&priv->lock, flags);
-			break;
-		case USB_PORT_FEAT_SUSPEND:
-			dev_dbg(dev, " SUSPEND\n");
-			/* Not supported on Octeon */
-			break;
-		case USB_PORT_FEAT_POWER:
-			dev_dbg(dev, " POWER\n");
-			/* Not supported on Octeon */
-			break;
-		case USB_PORT_FEAT_INDICATOR:
-			dev_dbg(dev, " INDICATOR\n");
-			/* Port inidicator not supported */
-			break;
-		case USB_PORT_FEAT_C_CONNECTION:
-			dev_dbg(dev, " C_CONNECTION\n");
-			/* Clears drivers internal connect status change flag */
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
-			spin_unlock_irqrestore(&priv->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_RESET:
-			dev_dbg(dev, " C_RESET\n");
-			/*
-			 * Clears the driver's internal Port Reset Change flag.
-			 */
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
-			spin_unlock_irqrestore(&priv->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_ENABLE:
-			dev_dbg(dev, " C_ENABLE\n");
-			/*
-			 * Clears the driver's internal Port Enable/Disable
-			 * Change flag.
-			 */
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
-			spin_unlock_irqrestore(&priv->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_SUSPEND:
-			dev_dbg(dev, " C_SUSPEND\n");
-			/*
-			 * Clears the driver's internal Port Suspend Change
-			 * flag, which is set when resume signaling on the host
-			 * port is complete.
-			 */
-			break;
-		case USB_PORT_FEAT_C_OVER_CURRENT:
-			dev_dbg(dev, " C_OVER_CURRENT\n");
-			/* Clears the driver's overcurrent Change flag */
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
-			spin_unlock_irqrestore(&priv->lock, flags);
-			break;
-		default:
-			dev_dbg(dev, " UNKNOWN\n");
-			return -EINVAL;
-		}
-		break;
-	case GetHubDescriptor:
-		dev_dbg(dev, "GetHubDescriptor\n");
-		desc = (struct usb_hub_descriptor *)buf;
-		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
-		desc->bNbrPorts = 1;
-		desc->wHubCharacteristics = 0x08;
-		desc->bPwrOn2PwrGood = 1;
-		desc->bHubContrCurrent = 0;
-		desc->u.hs.DeviceRemovable[0] = 0;
-		desc->u.hs.DeviceRemovable[1] = 0xff;
-		break;
-	case GetHubStatus:
-		dev_dbg(dev, "GetHubStatus\n");
-		*(__le32 *) buf = 0;
-		break;
-	case GetPortStatus:
-		dev_dbg(dev, "GetPortStatus\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		spin_lock_irqsave(&priv->lock, flags);
-		usb_port_status = cvmx_usb_get_status(&priv->usb);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		port_status = 0;
-
-		if (usb_port_status.connect_change) {
-			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-			dev_dbg(dev, " C_CONNECTION\n");
-		}
-
-		if (usb_port_status.port_enabled) {
-			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-			dev_dbg(dev, " C_ENABLE\n");
-		}
-
-		if (usb_port_status.connected) {
-			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-			dev_dbg(dev, " CONNECTION\n");
-		}
-
-		if (usb_port_status.port_enabled) {
-			port_status |= (1 << USB_PORT_FEAT_ENABLE);
-			dev_dbg(dev, " ENABLE\n");
-		}
-
-		if (usb_port_status.port_over_current) {
-			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-			dev_dbg(dev, " OVER_CURRENT\n");
-		}
-
-		if (usb_port_status.port_powered) {
-			port_status |= (1 << USB_PORT_FEAT_POWER);
-			dev_dbg(dev, " POWER\n");
-		}
-
-		if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) {
-			port_status |= USB_PORT_STAT_HIGH_SPEED;
-			dev_dbg(dev, " HIGHSPEED\n");
-		} else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) {
-			port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
-			dev_dbg(dev, " LOWSPEED\n");
-		}
-
-		*((__le32 *) buf) = cpu_to_le32(port_status);
-		break;
-	case SetHubFeature:
-		dev_dbg(dev, "SetHubFeature\n");
-		/* No HUB features supported */
-		break;
-	case SetPortFeature:
-		dev_dbg(dev, "SetPortFeature\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		switch (wValue) {
-		case USB_PORT_FEAT_SUSPEND:
-			dev_dbg(dev, " SUSPEND\n");
-			return -EINVAL;
-		case USB_PORT_FEAT_POWER:
-			dev_dbg(dev, " POWER\n");
-			return -EINVAL;
-		case USB_PORT_FEAT_RESET:
-			dev_dbg(dev, " RESET\n");
-			spin_lock_irqsave(&priv->lock, flags);
-			cvmx_usb_disable(&priv->usb);
-			if (cvmx_usb_enable(&priv->usb))
-				dev_dbg(dev, "Failed to enable the port\n");
-			spin_unlock_irqrestore(&priv->lock, flags);
-			return 0;
-		case USB_PORT_FEAT_INDICATOR:
-			dev_dbg(dev, " INDICATOR\n");
-			/* Not supported */
-			break;
-		default:
-			dev_dbg(dev, " UNKNOWN\n");
-			return -EINVAL;
-		}
-		break;
-	default:
-		dev_dbg(dev, "Unknown root hub request\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-
-static const struct hc_driver octeon_hc_driver = {
-	.description		= "Octeon USB",
-	.product_desc		= "Octeon Host Controller",
-	.hcd_priv_size		= sizeof(struct octeon_hcd),
-	.irq			= octeon_usb_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
-	.start			= octeon_usb_start,
-	.stop			= octeon_usb_stop,
-	.urb_enqueue		= octeon_usb_urb_enqueue,
-	.urb_dequeue		= octeon_usb_urb_dequeue,
-	.endpoint_disable	= octeon_usb_endpoint_disable,
-	.get_frame_number	= octeon_usb_get_frame_number,
-	.hub_status_data	= octeon_usb_hub_status_data,
-	.hub_control		= octeon_usb_hub_control,
-};
-
-
-static int octeon_usb_driver_probe(struct device *dev)
-{
-	int status;
-	int usb_num = to_platform_device(dev)->id;
-	int irq = platform_get_irq(to_platform_device(dev), 0);
-	struct octeon_hcd *priv;
-	struct usb_hcd *hcd;
-	unsigned long flags;
-
-	/*
-	 * Set the DMA mask to 64bits so we get buffers already translated for
-	 * DMA.
-	 */
-	dev->coherent_dma_mask = ~0;
-	dev->dma_mask = &dev->coherent_dma_mask;
-
-	hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
-	if (!hcd) {
-		dev_dbg(dev, "Failed to allocate memory for HCD\n");
-		return -1;
-	}
-	hcd->uses_new_polling = 1;
-	priv = (struct octeon_hcd *)hcd->hcd_priv;
-
-	spin_lock_init(&priv->lock);
-
-	tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
-	INIT_LIST_HEAD(&priv->dequeue_list);
-
-	status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO);
-	if (status) {
-		dev_dbg(dev, "USB initialization failed with %d\n", status);
-		kfree(hcd);
-		return -1;
-	}
-
-	/* This delay is needed for CN3010, but I don't know why... */
-	mdelay(10);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	cvmx_usb_poll(&priv->usb);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	status = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (status) {
-		dev_dbg(dev, "USB add HCD failed with %d\n", status);
-		kfree(hcd);
-		return -1;
-	}
-
-	dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
-
-	return 0;
-}
-
-static int octeon_usb_driver_remove(struct device *dev)
-{
-	int status;
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	usb_remove_hcd(hcd);
-	tasklet_kill(&priv->dequeue_tasklet);
-	spin_lock_irqsave(&priv->lock, flags);
-	status = cvmx_usb_shutdown(&priv->usb);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	if (status)
-		dev_dbg(dev, "USB shutdown failed with %d\n", status);
-
-	kfree(hcd);
-
-	return 0;
-}
-
-static struct device_driver octeon_usb_driver = {
-	.name	= "OcteonUSB",
-	.bus	= &platform_bus_type,
-	.probe	= octeon_usb_driver_probe,
-	.remove	= octeon_usb_driver_remove,
-};
-
-
-#define MAX_USB_PORTS   10
-static struct platform_device *pdev_glob[MAX_USB_PORTS];
-static int octeon_usb_registered;
-static int __init octeon_usb_module_init(void)
-{
-	int num_devices = cvmx_usb_get_num_ports();
-	int device;
-
-	if (usb_disabled() || num_devices == 0)
-		return -ENODEV;
-
-	if (driver_register(&octeon_usb_driver))
-		return -ENOMEM;
-
-	octeon_usb_registered = 1;
-
-	/*
-	 * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
-	 * IOB priority registers.  Under heavy network load USB
-	 * hardware can be starved by the IOB causing a crash.  Give
-	 * it a priority boost if it has been waiting more than 400
-	 * cycles to avoid this situation.
-	 *
-	 * Testing indicates that a cnt_val of 8192 is not sufficient,
-	 * but no failures are seen with 4096.  We choose a value of
-	 * 400 to give a safety factor of 10.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-		union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
-
-		pri_cnt.u64 = 0;
-		pri_cnt.s.cnt_enb = 1;
-		pri_cnt.s.cnt_val = 400;
-		cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
-	}
-
-	for (device = 0; device < num_devices; device++) {
-		struct resource irq_resource;
-		struct platform_device *pdev;
-		memset(&irq_resource, 0, sizeof(irq_resource));
-		irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
-		irq_resource.end = irq_resource.start;
-		irq_resource.flags = IORESOURCE_IRQ;
-		pdev = platform_device_register_simple((char *)octeon_usb_driver.  name, device, &irq_resource, 1);
-		if (IS_ERR(pdev)) {
-			driver_unregister(&octeon_usb_driver);
-			octeon_usb_registered = 0;
-			return PTR_ERR(pdev);
-		}
-		if (device < MAX_USB_PORTS)
-			pdev_glob[device] = pdev;
-
-	}
-	return 0;
-}
-
-static void __exit octeon_usb_module_cleanup(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_USB_PORTS; i++)
-		if (pdev_glob[i]) {
-			platform_device_unregister(pdev_glob[i]);
-			pdev_glob[i] = NULL;
-		}
-	if (octeon_usb_registered)
-		driver_unregister(&octeon_usb_driver);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
-MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
-module_init(octeon_usb_module_init);
-module_exit(octeon_usb_module_cleanup);
diff --git a/target/linux/octeon/patches-3.10/0001-MIPS-Octeon-Fix-DT-pruning-bug-with-pip-ports.patch b/target/linux/octeon/patches-3.10/0001-MIPS-Octeon-Fix-DT-pruning-bug-with-pip-ports.patch
deleted file mode 100644
index 0a905d5c38..0000000000
--- a/target/linux/octeon/patches-3.10/0001-MIPS-Octeon-Fix-DT-pruning-bug-with-pip-ports.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From ab2bb148c5932712d2717a7f3a452846f07a660a Mon Sep 17 00:00:00 2001
-From: Faidon Liambotis <paravoid@debian.org>
-Date: Thu, 11 Jul 2013 21:08:09 +0000
-Subject: [PATCH] MIPS: Octeon: Fix DT pruning bug with pip ports
-
-During the pruning of the device tree octeon_fdt_pip_iface() is called
-for each PIP interface and every port up to the port count is removed
-from the device tree. However, the count was set to the return value of
-cvmx_helper_interface_enumerate() which doesn't actually return the
-count but just returns zero on success. This effectively removed *all*
-ports from the tree.
-
-Use cvmx_helper_ports_on_interface() instead to fix this. This
-successfully restores the 3 ports of my ERLite-3 and fixes the "kernel
-assigns random MAC addresses" issue.
-
-Signed-off-by: Faidon Liambotis <paravoid@debian.org>
-Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: David Daney <david.daney@cavium.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5587/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/cavium-octeon/octeon-platform.c |    5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/arch/mips/cavium-octeon/octeon-platform.c
-+++ b/arch/mips/cavium-octeon/octeon-platform.c
-@@ -334,9 +334,10 @@ static void __init octeon_fdt_pip_iface(
- 	char name_buffer[20];
- 	int iface;
- 	int p;
--	int count;
-+	int count = 0;
- 
--	count = cvmx_helper_interface_enumerate(idx);
-+	if (cvmx_helper_interface_enumerate(idx) == 0)
-+		count = cvmx_helper_ports_on_interface(idx);
- 
- 	snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
- 	iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
diff --git a/target/linux/octeon/patches-3.10/0002-MIPS-Octeon-Enable-interfaces-on-EdgeRouter-Lite.patch b/target/linux/octeon/patches-3.10/0002-MIPS-Octeon-Enable-interfaces-on-EdgeRouter-Lite.patch
deleted file mode 100644
index 84b66006af..0000000000
--- a/target/linux/octeon/patches-3.10/0002-MIPS-Octeon-Enable-interfaces-on-EdgeRouter-Lite.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From a135a9b5d9683ace787c7d86f1e642d9acfacdde Mon Sep 17 00:00:00 2001
-From: Aaro Koskinen <aaro.koskinen@iki.fi>
-Date: Sun, 23 Jun 2013 20:38:44 +0000
-Subject: [PATCH] MIPS: Octeon: Enable interfaces on EdgeRouter Lite
-
-Enable interfaces on EdgeRouter Lite. Tested with cavium_octeon_defconfig
-and busybox shell. DHCP & ping works with eth0, eth1 and eth2.
-
-The board type "UBNT_E100" is taken from the sources of the vendor kernel
-shipped with the product.
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: David Daney <david.daney@cavium.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5546/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/cavium-octeon/executive/cvmx-helper-board.c |   13 +++++++++++++
- arch/mips/include/asm/octeon/cvmx-bootinfo.h          |    2 ++
- 2 files changed, 15 insertions(+)
-
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -181,6 +181,11 @@ int cvmx_helper_board_get_mii_address(in
- 			return ipd_port - 16 + 4;
- 		else
- 			return -1;
-+	case CVMX_BOARD_TYPE_UBNT_E100:
-+		if (ipd_port >= 0 && ipd_port <= 2)
-+			return 7 - ipd_port;
-+		else
-+			return -1;
- 	}
- 
- 	/* Some unknown board. Somebody forgot to update this function... */
-@@ -706,6 +711,14 @@ int __cvmx_helper_board_hardware_enable(
- 				}
- 			}
- 		}
-+	} else if (cvmx_sysinfo_get()->board_type ==
-+			CVMX_BOARD_TYPE_UBNT_E100) {
-+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
-+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
-+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
-+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
-+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
-+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
- 	}
- 	return 0;
- }
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -227,6 +227,7 @@ enum cvmx_board_types_enum {
- 	 * use any numbers in this range.
- 	 */
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
-+	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
- 	/* The remaining range is reserved for future use. */
-@@ -325,6 +326,7 @@ static inline const char *cvmx_board_typ
- 
- 		    /* Customer private range */
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
- 	return "Unsupported Board";
diff --git a/target/linux/octeon/patches-3.10/0003-staging-MIPS-add-Octeon-USB-HCD-support.patch b/target/linux/octeon/patches-3.10/0003-staging-MIPS-add-Octeon-USB-HCD-support.patch
deleted file mode 100644
index 7f602585ca..0000000000
--- a/target/linux/octeon/patches-3.10/0003-staging-MIPS-add-Octeon-USB-HCD-support.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From b164935b38d64557a32892e7aa45e213e9d11ea8 Mon Sep 17 00:00:00 2001
-From: Aaro Koskinen <aaro.koskinen@iki.fi>
-Date: Sat, 1 Jun 2013 21:42:58 +0300
-Subject: [PATCH] staging: MIPS: add Octeon USB HCD support
-
-Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
-mass storage.
-
-The driver has been extracted from GPL sources of EdgeRouter Lite firmware
-(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
-to make it work with 3.10-rc3.
-
-$ uname -a
-Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
-$ modprobe octeon-usb
-[   37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
-[   37.983649] OcteonUSB: Detected 1 ports
-[   37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
-[   38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
-[   38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
-[   38.019970] hub 1-0:1.0: USB hub found
-[   38.023851] hub 1-0:1.0: 1 port detected
-[   38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
-[   38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
-[   38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
-[   38.597375] scsi0 : usb-storage 1-1:1.0
-[   39.604111] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
-[   39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
-[   39.630696] sd 0:0:0:0: [sda] Write Protect is off
-[   39.635945] sd 0:0:0:0: [sda] No Caching mode page present
-[   39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
-[   39.651341] sd 0:0:0:0: [sda] No Caching mode page present
-[   39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
-[   39.664296]  sda: sda1 sda2
-[   39.675574] sd 0:0:0:0: [sda] No Caching mode page present
-[   39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
-[   39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Cc: David Daney <ddaney.cavm@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/staging/Kconfig                      |    2 +
- drivers/staging/Makefile                     |    1 +
- drivers/staging/octeon-usb/Kconfig           |   10 +
- drivers/staging/octeon-usb/Makefile          |    3 +
- drivers/staging/octeon-usb/TODO              |   11 +
- drivers/staging/octeon-usb/cvmx-usb.c        | 3344 ++++++++++++++++++++++++++
- drivers/staging/octeon-usb/cvmx-usb.h        | 1085 +++++++++
- drivers/staging/octeon-usb/cvmx-usbcx-defs.h | 3086 ++++++++++++++++++++++++
- drivers/staging/octeon-usb/cvmx-usbnx-defs.h | 1596 ++++++++++++
- drivers/staging/octeon-usb/octeon-hcd.c      |  854 +++++++
- 10 files changed, 9992 insertions(+)
- create mode 100644 drivers/staging/octeon-usb/Kconfig
- create mode 100644 drivers/staging/octeon-usb/Makefile
- create mode 100644 drivers/staging/octeon-usb/TODO
- create mode 100644 drivers/staging/octeon-usb/cvmx-usb.c
- create mode 100644 drivers/staging/octeon-usb/cvmx-usb.h
- create mode 100644 drivers/staging/octeon-usb/cvmx-usbcx-defs.h
- create mode 100644 drivers/staging/octeon-usb/cvmx-usbnx-defs.h
- create mode 100644 drivers/staging/octeon-usb/octeon-hcd.c
-
---- a/drivers/staging/Kconfig
-+++ b/drivers/staging/Kconfig
-@@ -62,6 +62,8 @@ source "drivers/staging/line6/Kconfig"
- 
- source "drivers/staging/octeon/Kconfig"
- 
-+source "drivers/staging/octeon-usb/Kconfig"
-+
- source "drivers/staging/serqt_usb2/Kconfig"
- 
- source "drivers/staging/vt6655/Kconfig"
---- a/drivers/staging/Makefile
-+++ b/drivers/staging/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_LINE6_USB)		+= line6/
- obj-$(CONFIG_NETLOGIC_XLR_NET)	+= netlogic/
- obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
- obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
-+obj-$(CONFIG_OCTEON_USB)	+= octeon-usb/
- obj-$(CONFIG_VT6655)		+= vt6655/
- obj-$(CONFIG_VT6656)		+= vt6656/
- obj-$(CONFIG_VME_BUS)		+= vme/
diff --git a/target/linux/octeon/patches-3.10/0004-fix_hcd.patch b/target/linux/octeon/patches-3.10/0004-fix_hcd.patch
deleted file mode 100644
index 318e59cb3e..0000000000
--- a/target/linux/octeon/patches-3.10/0004-fix_hcd.patch
+++ /dev/null
@@ -1,113 +0,0 @@
---- a/drivers/staging/octeon-usb/octeon-hcd.c
-+++ b/drivers/staging/octeon-usb/octeon-hcd.c
-@@ -673,8 +673,9 @@ static const struct hc_driver octeon_hc_
- };
- 
- 
--static int octeon_usb_driver_probe(struct device *dev)
-+static int octeon_usb_driver_probe(struct platform_device *pdev)
- {
-+	struct device *dev = &pdev->dev;
- 	int status;
- 	int usb_num = to_platform_device(dev)->id;
- 	int irq = platform_get_irq(to_platform_device(dev), 0);
-@@ -728,8 +729,9 @@ static int octeon_usb_driver_probe(struc
- 	return 0;
- }
- 
--static int octeon_usb_driver_remove(struct device *dev)
-+static int octeon_usb_driver_remove(struct platform_device *pdev)
- {
-+	struct device *dev = &pdev->dev;
- 	int status;
- 	struct usb_hcd *hcd = dev_get_drvdata(dev);
- 	struct octeon_hcd *priv = hcd_to_octeon(hcd);
-@@ -748,30 +750,35 @@ static int octeon_usb_driver_remove(stru
- 	return 0;
- }
- 
--static struct device_driver octeon_usb_driver = {
--	.name	= "OcteonUSB",
--	.bus	= &platform_bus_type,
-+static struct platform_driver octeon_usb_driver = {
-+	.driver = {
-+		.name	= "OcteonUSB",
-+		.owner  = THIS_MODULE,
-+	},
- 	.probe	= octeon_usb_driver_probe,
- 	.remove	= octeon_usb_driver_remove,
- };
- 
-+static struct resource octeon_usb_resources = {
-+	.start	= OCTEON_IRQ_USB0,
-+	.end	= OCTEON_IRQ_USB0,
-+	.flags	= IORESOURCE_IRQ,
-+};
-+
-+static struct platform_device octeon_usb_device = {
-+	.name		= "OcteonUSB",
-+	.id		= 0,
-+	.resource	= &octeon_usb_resources,
-+	.num_resources	= 1,
-+};
- 
--#define MAX_USB_PORTS   10
--static struct platform_device *pdev_glob[MAX_USB_PORTS];
--static int octeon_usb_registered;
- static int __init octeon_usb_module_init(void)
- {
- 	int num_devices = cvmx_usb_get_num_ports();
--	int device;
- 
- 	if (usb_disabled() || num_devices == 0)
- 		return -ENODEV;
- 
--	if (driver_register(&octeon_usb_driver))
--		return -ENOMEM;
--
--	octeon_usb_registered = 1;
--
- 	/*
- 	 * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
- 	 * IOB priority registers.  Under heavy network load USB
-@@ -792,37 +799,14 @@ static int __init octeon_usb_module_init
- 		cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
- 	}
- 
--	for (device = 0; device < num_devices; device++) {
--		struct resource irq_resource;
--		struct platform_device *pdev;
--		memset(&irq_resource, 0, sizeof(irq_resource));
--		irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
--		irq_resource.end = irq_resource.start;
--		irq_resource.flags = IORESOURCE_IRQ;
--		pdev = platform_device_register_simple((char *)octeon_usb_driver.  name, device, &irq_resource, 1);
--		if (IS_ERR(pdev)) {
--			driver_unregister(&octeon_usb_driver);
--			octeon_usb_registered = 0;
--			return PTR_ERR(pdev);
--		}
--		if (device < MAX_USB_PORTS)
--			pdev_glob[device] = pdev;
-+	platform_device_register(&octeon_usb_device);
- 
--	}
--	return 0;
-+	return platform_driver_register(&octeon_usb_driver);
- }
- 
- static void __exit octeon_usb_module_cleanup(void)
- {
--	int i;
--
--	for (i = 0; i < MAX_USB_PORTS; i++)
--		if (pdev_glob[i]) {
--			platform_device_unregister(pdev_glob[i]);
--			pdev_glob[i] = NULL;
--		}
--	if (octeon_usb_registered)
--		driver_unregister(&octeon_usb_driver);
-+	platform_driver_unregister(&octeon_usb_driver);
- }
- 
- MODULE_LICENSE("GPL");
diff --git a/target/linux/octeon/patches-3.10/0005-MIPS-Octeon-ethernet-dropped-napi.patch b/target/linux/octeon/patches-3.10/0005-MIPS-Octeon-ethernet-dropped-napi.patch
deleted file mode 100644
index 43d0f8cb47..0000000000
--- a/target/linux/octeon/patches-3.10/0005-MIPS-Octeon-ethernet-dropped-napi.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From patchwork Thu Sep  5 18:43:59 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [1/3] staging: octeon-ethernet: make dropped packets to consume NAPI
- budget
-From: Aaro Koskinen <aaro.koskinen@iki.fi>
-X-Patchwork-Id: 5809
-Message-Id: <1378406641-16530-2-git-send-email-aaro.koskinen@iki.fi>
-To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- devel@driverdev.osuosl.org, linux-mips@linux-mips.org
-Cc: David Daney <david.daney@cavium.com>,
- "Jason A. Donenfeld" <Jason@zx2c4.com>, richard@nod.at,
- Aaro Koskinen <aaro.koskinen@iki.fi>
-Date: Thu,  5 Sep 2013 21:43:59 +0300
-
-We should count also dropped packets, otherwise the NAPI handler may
-end up running too long.
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-
----
-drivers/staging/octeon/ethernet-rx.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
-index 34afc16..10e5416 100644
---- a/drivers/staging/octeon/ethernet-rx.c
-+++ b/drivers/staging/octeon/ethernet-rx.c
-@@ -303,6 +303,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
- 			if (backlog > budget * cores_in_use && napi != NULL)
- 				cvm_oct_enable_one_cpu();
- 		}
-+		rx_count++;
- 
- 		skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
- 		if (likely(skb_in_hw)) {
-@@ -429,7 +430,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
- #endif
- 				}
- 				netif_receive_skb(skb);
--				rx_count++;
- 			} else {
- 				/* Drop any packet received for a device that isn't up */
- 				/*
diff --git a/target/linux/octeon/patches-3.10/0006-MIPS-Octeon-ethernet-remove-debug-noise.patch b/target/linux/octeon/patches-3.10/0006-MIPS-Octeon-ethernet-remove-debug-noise.patch
deleted file mode 100644
index cc4f270e79..0000000000
--- a/target/linux/octeon/patches-3.10/0006-MIPS-Octeon-ethernet-remove-debug-noise.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From patchwork Thu Sep  5 18:44:00 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [2/3] staging: octeon-ethernet: remove skb alloc failure warnings
-From: Aaro Koskinen <aaro.koskinen@iki.fi>
-X-Patchwork-Id: 5811
-Message-Id: <1378406641-16530-3-git-send-email-aaro.koskinen@iki.fi>
-To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- devel@driverdev.osuosl.org, linux-mips@linux-mips.org
-Cc: David Daney <david.daney@cavium.com>,
- "Jason A. Donenfeld" <Jason@zx2c4.com>, richard@nod.at,
- Aaro Koskinen <aaro.koskinen@iki.fi>
-Date: Thu,  5 Sep 2013 21:44:00 +0300
-
-Remove skb allocation failure warnings. They will trigger a page
-allocation warning already. Also, one of the warnings was not ratelimited,
-causing the box to lock up under heavy traffic & low memory.
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: David Daney <david.daney@cavium.com>
-
----
-drivers/staging/octeon/ethernet-mem.c | 7 +------
- drivers/staging/octeon/ethernet-rx.c  | 3 ---
- 2 files changed, 1 insertion(+), 9 deletions(-)
-
-diff --git a/drivers/staging/octeon/ethernet-mem.c b/drivers/staging/octeon/ethernet-mem.c
-index 78b6cb7..199059d 100644
---- a/drivers/staging/octeon/ethernet-mem.c
-+++ b/drivers/staging/octeon/ethernet-mem.c
-@@ -48,13 +48,8 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
- 	while (freed) {
- 
- 		struct sk_buff *skb = dev_alloc_skb(size + 256);
--		if (unlikely(skb == NULL)) {
--			pr_warning
--			    ("Failed to allocate skb for hardware pool %d\n",
--			     pool);
-+		if (unlikely(skb == NULL))
- 			break;
--		}
--
- 		skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
- 		*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
- 		cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));
-diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
-index 10e5416..e14a1bb 100644
---- a/drivers/staging/octeon/ethernet-rx.c
-+++ b/drivers/staging/octeon/ethernet-rx.c
-@@ -337,9 +337,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
- 			 */
- 			skb = dev_alloc_skb(work->len);
- 			if (!skb) {
--				printk_ratelimited("Port %d failed to allocate "
--						   "skbuff, packet dropped\n",
--						   work->ipprt);
- 				cvm_oct_free_work(work);
- 				continue;
- 			}
diff --git a/target/linux/octeon/patches-3.10/0007-MIPS-Octeon-ethernet-irq-enable.patch b/target/linux/octeon/patches-3.10/0007-MIPS-Octeon-ethernet-irq-enable.patch
deleted file mode 100644
index ea9a28a211..0000000000
--- a/target/linux/octeon/patches-3.10/0007-MIPS-Octeon-ethernet-irq-enable.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From patchwork Thu Sep  5 18:44:01 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [3/3] staging: octeon-ethernet: rgmii: enable interrupts that we can
- handle
-From: Aaro Koskinen <aaro.koskinen@iki.fi>
-X-Patchwork-Id: 5810
-Message-Id: <1378406641-16530-4-git-send-email-aaro.koskinen@iki.fi>
-To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- devel@driverdev.osuosl.org, linux-mips@linux-mips.org
-Cc: David Daney <david.daney@cavium.com>,
- "Jason A. Donenfeld" <Jason@zx2c4.com>, richard@nod.at,
- Aaro Koskinen <aaro.koskinen@iki.fi>
-Date: Thu,  5 Sep 2013 21:44:01 +0300
-
-Enable only those interrupts that we can handle & acknowledge in the
-interrupt handler.
-
-At least on EdgeRouter Lite, the hardware may occasionally interrupt with
-some error condition when the physical link status changes frequently.
-Since the interrupt condition is not acked properly, this leads to the
-following warning and the IRQ gets disabled completely:
-
-[   41.324700] eth0: Link down
-[   44.324721] eth0: 1000 Mbps Full duplex, port  0, queue  0
-[   44.885590] irq 117: nobody cared (try booting with the "irqpoll" option)
-[   44.892397] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc5-edge-los.git-27d042f-dirty-00950-gaa42f2d-dirty #8
-[   44.902825] Stack : ffffffff815c0000 0000000000000004 0000000000000003 0000000000000000
-	  ffffffff81fd0000 ffffffff815c0000 0000000000000004 ffffffff8118530c
-	  ffffffff815c0000 ffffffff811858d8 0000000000000000 0000000000000000
-	  ffffffff81fd0000 ffffffff81fc0000 ffffffff8152f3a0 ffffffff815b7bf7
-	  ffffffff81fc6688 ffffffff815b8060 0000000000000000 0000000000000000
-	  0000000000000000 ffffffff815346c8 ffffffff815346b0 ffffffff814a6a18
-	  ffffffff8158b848 ffffffff81145614 ffffffff81593800 ffffffff81187174
-	  ffffffff815b7d00 ffffffff8158b760 0000000000000000 ffffffff814a9184
-	  0000000000000000 0000000000000000 0000000000000000 0000000000000000
-	  0000000000000000 ffffffff811203b8 0000000000000000 0000000000000000
-	  ...
-[   44.968408] Call Trace:
-[   44.970873] [<ffffffff811203b8>] show_stack+0x68/0x80
-[   44.975937] [<ffffffff814a9184>] dump_stack+0x78/0xb8
-[   44.980999] [<ffffffff811aac54>] __report_bad_irq+0x44/0x108
-[   44.986662] [<ffffffff811ab238>] note_interrupt+0x248/0x2a0
-[   44.992240] [<ffffffff811a85e4>] handle_irq_event_percpu+0x144/0x200
-[   44.998598] [<ffffffff811a86f4>] handle_irq_event+0x54/0x90
-[   45.004176] [<ffffffff811ab908>] handle_level_irq+0xd0/0x148
-[   45.009839] [<ffffffff811a7b04>] generic_handle_irq+0x34/0x50
-[   45.015589] [<ffffffff8111dae8>] do_IRQ+0x18/0x30
-[   45.020301] [<ffffffff8110486c>] plat_irq_dispatch+0x74/0xb8
-[   45.025958]
-[   45.027451] handlers:
-[   45.029731] [<ffffffff813fca10>] cvm_oct_rgmii_rml_interrupt
-[   45.035397] Disabling IRQ #117
-[   45.038742] Port 0 receive error code 13, packet dropped
-[   46.324719] eth0: Link down
-[   48.324733] eth0: 1000 Mbps Full duplex, port  0, queue  0
-
-Reported-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
-Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: David Daney <david.daney@cavium.com>
-
----
-drivers/staging/octeon/ethernet-rgmii.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
-diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
-index d8f5f69..ea53af3 100644
---- a/drivers/staging/octeon/ethernet-rgmii.c
-+++ b/drivers/staging/octeon/ethernet-rgmii.c
-@@ -373,9 +373,7 @@ int cvm_oct_rgmii_init(struct net_device *dev)
- 			 * Enable interrupts on inband status changes
- 			 * for this port.
- 			 */
--			gmx_rx_int_en.u64 =
--			    cvmx_read_csr(CVMX_GMXX_RXX_INT_EN
--					  (index, interface));
-+			gmx_rx_int_en.u64 = 0;
- 			gmx_rx_int_en.s.phy_dupx = 1;
- 			gmx_rx_int_en.s.phy_link = 1;
- 			gmx_rx_int_en.s.phy_spd = 1;
diff --git a/target/linux/octeon/patches-3.10/0008-MIPS-cavium-octeon-fix-out-of-bounds-array-access.patch b/target/linux/octeon/patches-3.10/0008-MIPS-cavium-octeon-fix-out-of-bounds-array-access.patch
deleted file mode 100644
index 78194bf261..0000000000
--- a/target/linux/octeon/patches-3.10/0008-MIPS-cavium-octeon-fix-out-of-bounds-array-access.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 8b75e77048a378339ada86eff548a5b253212859 Mon Sep 17 00:00:00 2001
-From: Aaro Koskinen <aaro.koskinen@nsn.com>
-Date: Fri, 1 Nov 2013 17:06:03 +0200
-Subject: [PATCH] MIPS: cavium-octeon: fix out-of-bounds array access
-
-When booting with in-kernel DTBs, the pruning code will enumerate
-interfaces 0-4. However, there is memory reserved only for 4 so some
-other data will get overwritten by cvmx_helper_interface_enumerate().
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
-Acked-by: David Daney <david.daney@cavium.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6102/
----
- arch/mips/cavium-octeon/executive/cvmx-helper.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
-@@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority)
- void (*cvmx_override_ipd_port_setup) (int ipd_port);
- 
- /* Port count per interface */
--static int interface_port_count[4] = { 0, 0, 0, 0 };
-+static int interface_port_count[5];
- 
- /* Port last configured link info index by IPD/PKO port */
- static cvmx_helper_link_info_t
diff --git a/target/linux/octeon/patches-3.10/0009-MIPS-cavium-octeon-fix-early-boot-hang-on-EBH5600-bo.patch b/target/linux/octeon/patches-3.10/0009-MIPS-cavium-octeon-fix-early-boot-hang-on-EBH5600-bo.patch
deleted file mode 100644
index 6cbbe348a0..0000000000
--- a/target/linux/octeon/patches-3.10/0009-MIPS-cavium-octeon-fix-early-boot-hang-on-EBH5600-bo.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From b2e4f1560f7388f8157dd2c828211abbfad0e806 Mon Sep 17 00:00:00 2001
-From: Aaro Koskinen <aaro.koskinen@nsn.com>
-Date: Fri, 1 Nov 2013 17:06:04 +0200
-Subject: [PATCH] MIPS: cavium-octeon: fix early boot hang on EBH5600 board
-
-The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is
-trying enumerate a non-existant interface. The actual hang happens in
-cvmx_helper_interface_get_mode():
-
-	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
-
-when interface == 4. We can avoid this situation by first checking that
-the interface exists in the DTB.
-
-Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
-Acked-by: David Daney <david.daney@cavium.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/6101/
----
- arch/mips/cavium-octeon/octeon-platform.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/cavium-octeon/octeon-platform.c
-+++ b/arch/mips/cavium-octeon/octeon-platform.c
-@@ -336,14 +336,14 @@ static void __init octeon_fdt_pip_iface(
- 	int p;
- 	int count = 0;
- 
--	if (cvmx_helper_interface_enumerate(idx) == 0)
--		count = cvmx_helper_ports_on_interface(idx);
--
- 	snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
- 	iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
- 	if (iface < 0)
- 		return;
- 
-+	if (cvmx_helper_interface_enumerate(idx) == 0)
-+		count = cvmx_helper_ports_on_interface(idx);
-+
- 	for (p = 0; p < 16; p++)
- 		octeon_fdt_pip_port(iface, idx, p, count - 1, pmac);
- }
diff --git a/target/linux/octeon/patches-3.10/0010-MIPS-octeon-Add-interface-mode-detection-for-Octeon-.patch b/target/linux/octeon/patches-3.10/0010-MIPS-octeon-Add-interface-mode-detection-for-Octeon-.patch
deleted file mode 100644
index 2002dd1d76..0000000000
--- a/target/linux/octeon/patches-3.10/0010-MIPS-octeon-Add-interface-mode-detection-for-Octeon-.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From d8ce75934b888df0bd73dfd9c030a2b034a04977 Mon Sep 17 00:00:00 2001
-From: Alex Smith <alex.smith@imgtec.com>
-Date: Thu, 29 May 2014 11:10:01 +0100
-Subject: [PATCH] MIPS: octeon: Add interface mode detection for Octeon II
-
-Add interface mode detection for Octeon II. This is necessary to detect
-the interface modes correctly on the UBNT E200 board. Code is taken
-from the UBNT GPL source release, with some alterations: SRIO, ILK and
-RXAUI interface modes are removed and instead return disabled as these
-modes are not currently supported.
-
-Signed-off-by: Alex Smith <alex.smith@imgtec.com>
-Tested-by: David Daney <david.daney@cavium.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/7039/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/cavium-octeon/executive/cvmx-helper.c | 166 ++++++++++++++++++++++++
- 1 file changed, 166 insertions(+)
-
---- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
-@@ -104,6 +104,158 @@ int cvmx_helper_ports_on_interface(int i
- }
- 
- /**
-+ * @INTERNAL
-+ * Return interface mode for CN68xx.
-+ */
-+static cvmx_helper_interface_mode_t __cvmx_get_mode_cn68xx(int interface)
-+{
-+	union cvmx_mio_qlmx_cfg qlm_cfg;
-+	switch (interface) {
-+	case 0:
-+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
-+		/* QLM is disabled when QLM SPD is 15. */
-+		if (qlm_cfg.s.qlm_spd == 15)
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+		if (qlm_cfg.s.qlm_cfg == 2)
-+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+		else if (qlm_cfg.s.qlm_cfg == 3)
-+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+		else
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	case 2:
-+	case 3:
-+	case 4:
-+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(interface));
-+		/* QLM is disabled when QLM SPD is 15. */
-+		if (qlm_cfg.s.qlm_spd == 15)
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+		if (qlm_cfg.s.qlm_cfg == 2)
-+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+		else if (qlm_cfg.s.qlm_cfg == 3)
-+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+		else
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	case 7:
-+		qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(3));
-+		/* QLM is disabled when QLM SPD is 15. */
-+		if (qlm_cfg.s.qlm_spd == 15) {
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+		} else if (qlm_cfg.s.qlm_cfg != 0) {
-+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1));
-+			if (qlm_cfg.s.qlm_cfg != 0)
-+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+		}
-+		return CVMX_HELPER_INTERFACE_MODE_NPI;
-+	case 8:
-+		return CVMX_HELPER_INTERFACE_MODE_LOOP;
-+	default:
-+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	}
-+}
-+
-+/**
-+ * @INTERNAL
-+ * Return interface mode for an Octeon II
-+ */
-+static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface)
-+{
-+	union cvmx_gmxx_inf_mode mode;
-+
-+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
-+		return __cvmx_get_mode_cn68xx(interface);
-+
-+	if (interface == 2)
-+		return CVMX_HELPER_INTERFACE_MODE_NPI;
-+
-+	if (interface == 3)
-+		return CVMX_HELPER_INTERFACE_MODE_LOOP;
-+
-+	/* Only present in CN63XX & CN66XX Octeon model */
-+	if ((OCTEON_IS_MODEL(OCTEON_CN63XX) &&
-+	     (interface == 4 || interface == 5)) ||
-+	    (OCTEON_IS_MODEL(OCTEON_CN66XX) &&
-+	     interface >= 4 && interface <= 7)) {
-+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	}
-+
-+	if (OCTEON_IS_MODEL(OCTEON_CN66XX)) {
-+		union cvmx_mio_qlmx_cfg mio_qlm_cfg;
-+
-+		/* QLM2 is SGMII0 and QLM1 is SGMII1 */
-+		if (interface == 0)
-+			mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2));
-+		else if (interface == 1)
-+			mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1));
-+		else
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+		if (mio_qlm_cfg.s.qlm_spd == 15)
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+		if (mio_qlm_cfg.s.qlm_cfg == 9)
-+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+		else if (mio_qlm_cfg.s.qlm_cfg == 11)
-+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+		else
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	} else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) {
-+		union cvmx_mio_qlmx_cfg qlm_cfg;
-+
-+		if (interface == 0) {
-+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2));
-+			if (qlm_cfg.s.qlm_cfg == 2)
-+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+			else if (qlm_cfg.s.qlm_cfg == 3)
-+				return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+			else
-+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+		} else if (interface == 1) {
-+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
-+			if (qlm_cfg.s.qlm_cfg == 2)
-+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+			else if (qlm_cfg.s.qlm_cfg == 3)
-+				return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+			else
-+				return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+		}
-+	} else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) {
-+		if (interface == 0) {
-+			union cvmx_mio_qlmx_cfg qlm_cfg;
-+			qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0));
-+			if (qlm_cfg.s.qlm_cfg == 2)
-+				return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+		}
-+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+	}
-+
-+	if (interface == 1 && OCTEON_IS_MODEL(OCTEON_CN63XX))
-+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
-+
-+	if (OCTEON_IS_MODEL(OCTEON_CN63XX)) {
-+		switch (mode.cn63xx.mode) {
-+		case 0:
-+			return CVMX_HELPER_INTERFACE_MODE_SGMII;
-+		case 1:
-+			return CVMX_HELPER_INTERFACE_MODE_XAUI;
-+		default:
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+		}
-+	} else {
-+		if (!mode.s.en)
-+			return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+		if (mode.s.type)
-+			return CVMX_HELPER_INTERFACE_MODE_GMII;
-+		else
-+			return CVMX_HELPER_INTERFACE_MODE_RGMII;
-+	}
-+}
-+
-+/**
-  * Get the operating mode of an interface. Depending on the Octeon
-  * chip and configuration, this function returns an enumeration
-  * of the type of packet I/O supported by an interface.
-@@ -116,6 +268,20 @@ int cvmx_helper_ports_on_interface(int i
- cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
- {
- 	union cvmx_gmxx_inf_mode mode;
-+
-+	if (interface < 0 ||
-+	    interface >= cvmx_helper_get_number_of_interfaces())
-+		return CVMX_HELPER_INTERFACE_MODE_DISABLED;
-+
-+	/*
-+	 * Octeon II models
-+	 */
-+	if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX))
-+		return __cvmx_get_mode_octeon2(interface);
-+
-+	/*
-+	 * Octeon and Octeon Plus models
-+	 */
- 	if (interface == 2)
- 		return CVMX_HELPER_INTERFACE_MODE_NPI;
- 
diff --git a/target/linux/octeon/patches-3.10/0011-MIPS-Octeon-Add-twsi-interrupt-initialization-for-OC.patch b/target/linux/octeon/patches-3.10/0011-MIPS-Octeon-Add-twsi-interrupt-initialization-for-OC.patch
deleted file mode 100644
index 382410f239..0000000000
--- a/target/linux/octeon/patches-3.10/0011-MIPS-Octeon-Add-twsi-interrupt-initialization-for-OC.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From a53825ef4e9b2f42a21ad2b903f4d0ce691a5d63 Mon Sep 17 00:00:00 2001
-From: Eunbong Song <eunb.song@samsung.com>
-Date: Tue, 22 Apr 2014 06:16:15 +0000
-Subject: [PATCH] MIPS: Octeon: Add twsi interrupt initialization for OCTEON
- 3XXX, 5XXX, 63XX
-
-In octeon_3xxx.dts file, there is a definiton for twsi/twsi2 interrupts.
-But there is no code for initialization of this interrupts. This patch adds
-code for initialization of twsi interrupts.
-
-Signed-off-by: Eunbong Song <eunb.song@samsung.com>
-Cc: linux-kernel@vger.kernel.org
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/6816/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/cavium-octeon/octeon-irq.c           | 2 ++
- arch/mips/include/asm/mach-cavium-octeon/irq.h | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/arch/mips/cavium-octeon/octeon-irq.c
-+++ b/arch/mips/cavium-octeon/octeon-irq.c
-@@ -1260,11 +1260,13 @@ static void __init octeon_irq_init_ciu(v
- 	for (i = 0; i < 4; i++)
- 		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40);
- 
-+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI, 0, 45);
- 	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46);
- 	for (i = 0; i < 4; i++)
- 		octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52);
- 
- 	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56);
-+	octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_TWSI2, 0, 59);
- 
- 	/* CIU_1 */
- 	for (i = 0; i < 16; i++)
---- a/arch/mips/include/asm/mach-cavium-octeon/irq.h
-+++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h
-@@ -35,6 +35,8 @@ enum octeon_irq {
- 	OCTEON_IRQ_PCI_MSI2,
- 	OCTEON_IRQ_PCI_MSI3,
- 
-+	OCTEON_IRQ_TWSI,
-+	OCTEON_IRQ_TWSI2,
- 	OCTEON_IRQ_RML,
- 	OCTEON_IRQ_TIMER0,
- 	OCTEON_IRQ_TIMER1,
diff --git a/target/linux/octeon/patches-3.10/100-ubnt_edgerouter2_support.patch b/target/linux/octeon/patches-3.10/100-ubnt_edgerouter2_support.patch
deleted file mode 100644
index 7891e7129a..0000000000
--- a/target/linux/octeon/patches-3.10/100-ubnt_edgerouter2_support.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -228,6 +228,8 @@ enum cvmx_board_types_enum {
- 	 */
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
- 	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
-+	CVMX_BOARD_TYPE_UBNT_E200 = 20003,
-+	CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
- 
- 	/* The remaining range is reserved for future use. */
-@@ -327,6 +329,8 @@ static inline const char *cvmx_board_typ
- 		    /* Customer private range */
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
-+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
- 	}
- 	return "Unsupported Board";
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -186,6 +186,8 @@ int cvmx_helper_board_get_mii_address(in
- 			return 7 - ipd_port;
- 		else
- 			return -1;
-+	case CVMX_BOARD_TYPE_UBNT_E200:
-+		return -1;
- 	}
- 
- 	/* Some unknown board. Somebody forgot to update this function... */
diff --git a/target/linux/octeon/patches-3.10/110-er200-ethernet_probe_order.patch b/target/linux/octeon/patches-3.10/110-er200-ethernet_probe_order.patch
deleted file mode 100644
index 3d39a04bfd..0000000000
--- a/target/linux/octeon/patches-3.10/110-er200-ethernet_probe_order.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -623,6 +623,7 @@ static int cvm_oct_probe(struct platform
- 	int interface;
- 	int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
- 	int qos;
-+	int i;
- 	struct device_node *pip;
- 
- 	octeon_mdiobus_force_mod_depencency();
-@@ -706,13 +707,19 @@ static int cvm_oct_probe(struct platform
- 	}
- 
- 	num_interfaces = cvmx_helper_get_number_of_interfaces();
--	for (interface = 0; interface < num_interfaces; interface++) {
--		cvmx_helper_interface_mode_t imode =
--		    cvmx_helper_interface_get_mode(interface);
--		int num_ports = cvmx_helper_ports_on_interface(interface);
-+	for (i = 0; i < num_interfaces; i++) {
-+		cvmx_helper_interface_mode_t imode;
-+		int interface;
-+		int num_ports;
- 		int port;
- 		int port_index;
- 
-+		interface = i;
-+		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
-+			interface = num_interfaces - (i + 1);
-+
-+		num_ports = cvmx_helper_ports_on_interface(interface);
-+		imode = cvmx_helper_interface_get_mode(interface);
- 		for (port_index = 0, port = cvmx_helper_get_ipd_port(interface, 0);
- 		     port < cvmx_helper_get_ipd_port(interface, num_ports);
- 		     port_index++, port++) {
diff --git a/target/linux/octeon/patches-3.10/120-octeon_platform_usb.patch b/target/linux/octeon/patches-3.10/120-octeon_platform_usb.patch
deleted file mode 100644
index 2137b4733e..0000000000
--- a/target/linux/octeon/patches-3.10/120-octeon_platform_usb.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: linux-3.10.49/arch/mips/cavium-octeon/octeon-platform.c
-===================================================================
---- linux-3.10.49.orig/arch/mips/cavium-octeon/octeon-platform.c	2014-07-26 20:39:48.109010152 +0100
-+++ linux-3.10.49/arch/mips/cavium-octeon/octeon-platform.c	2014-07-26 20:41:10.005008627 +0100
-@@ -82,7 +82,7 @@
- 	};
- 
- 	/* Only Octeon2 has ehci/ohci */
--	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
-+	if (!OCTEON_IS_MODEL(OCTEON_CN6XXX))
- 		return 0;
- 
- 	if (octeon_is_simulation() || usb_disabled())
-@@ -131,7 +131,7 @@
- 	};
- 
- 	/* Only Octeon2 has ehci/ohci */
--	if (!OCTEON_IS_MODEL(OCTEON_CN63XX))
-+	if (!OCTEON_IS_MODEL(OCTEON_CN6XXX))
- 		return 0;
- 
- 	if (octeon_is_simulation() || usb_disabled())
diff --git a/target/linux/octeon/patches-3.10/130-gpio.patch b/target/linux/octeon/patches-3.10/130-gpio.patch
deleted file mode 100644
index 9312f33f88..0000000000
--- a/target/linux/octeon/patches-3.10/130-gpio.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-Index: linux-3.10.49/drivers/gpio/Kconfig
-===================================================================
---- linux-3.10.49.orig/drivers/gpio/Kconfig	2014-07-18 00:58:15.000000000 +0200
-+++ linux-3.10.49/drivers/gpio/Kconfig	2014-08-07 11:41:16.517169817 +0200
-@@ -171,6 +171,14 @@
- 	  Qualcomm MSM chips.  Most of the pins on the MSM can be
- 	  selected for GPIO, and are controlled by this driver.
- 
-+config GPIO_OCTEON
-+	tristate "Cavium OCTEON GPIO"
-+	depends on GPIOLIB && CPU_CAVIUM_OCTEON
-+	default y
-+	help
-+	  Say yes here to support the on-chip GPIO lines on the OCTEON
-+	  family of SOCs.
-+
- config GPIO_MVEBU
- 	def_bool y
- 	depends on PLAT_ORION
-Index: linux-3.10.49/drivers/gpio/Makefile
-===================================================================
---- linux-3.10.49.orig/drivers/gpio/Makefile	2014-07-18 00:58:15.000000000 +0200
-+++ linux-3.10.49/drivers/gpio/Makefile	2014-08-07 11:41:16.517169817 +0200
-@@ -10,6 +10,7 @@
- # Device drivers. Generally keep list sorted alphabetically
- obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
- 
-+obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
- obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
- obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
- obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
-Index: linux-3.10.49/drivers/gpio/gpio-octeon.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.49/drivers/gpio/gpio-octeon.c	2014-08-07 11:53:14.733161106 +0200
-@@ -0,0 +1,166 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2011,2012 Cavium Inc.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/gpio.h>
-+#include <linux/io.h>
-+
-+#include <asm/octeon/octeon.h>
-+#include <asm/octeon/cvmx-gpio-defs.h>
-+
-+#define DRV_VERSION "1.0"
-+#define DRV_DESCRIPTION "Cavium Inc. OCTEON GPIO Driver"
-+
-+#define RX_DAT 0x80
-+#define TX_SET 0x88
-+#define TX_CLEAR 0x90
-+
-+int gpio_to_irq(unsigned gpio)
-+{
-+	return -EINVAL;
-+}
-+EXPORT_SYMBOL(gpio_to_irq);
-+
-+/*
-+ * The address offset of the GPIO configuration register for a given
-+ * line.
-+ */
-+static unsigned int bit_cfg_reg(unsigned int gpio)
-+{
-+	if (gpio < 16)
-+		return 8 * gpio;
-+	else
-+		return 8 * (gpio - 16) + 0x100;
-+}
-+
-+struct octeon_gpio {
-+	struct gpio_chip chip;
-+	u64 register_base;
-+};
-+
-+static int octeon_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
-+
-+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), 0);
-+	return 0;
-+}
-+
-+static void octeon_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
-+	u64 mask = 1ull << offset;
-+	u64 reg = gpio->register_base + (value ? TX_SET : TX_CLEAR);
-+	cvmx_write_csr(reg, mask);
-+}
-+
-+static int octeon_gpio_dir_out(struct gpio_chip *chip, unsigned offset,
-+			       int value)
-+{
-+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
-+	union cvmx_gpio_bit_cfgx cfgx;
-+
-+
-+	octeon_gpio_set(chip, offset, value);
-+
-+	cfgx.u64 = 0;
-+	cfgx.s.tx_oe = 1;
-+
-+	cvmx_write_csr(gpio->register_base + bit_cfg_reg(offset), cfgx.u64);
-+	return 0;
-+}
-+
-+static int octeon_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct octeon_gpio *gpio = container_of(chip, struct octeon_gpio, chip);
-+	u64 read_bits = cvmx_read_csr(gpio->register_base + RX_DAT);
-+
-+	return ((1ull << offset) & read_bits) != 0;
-+}
-+
-+static int octeon_gpio_probe(struct platform_device *pdev)
-+{
-+	struct octeon_gpio *gpio;
-+	struct gpio_chip *chip;
-+	struct resource *res_mem;
-+	int err = 0;
-+
-+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
-+	if (!gpio)
-+		return -ENOMEM;
-+	chip = &gpio->chip;
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res_mem == NULL) {
-+		dev_err(&pdev->dev, "found no memory resource\n");
-+		err = -ENXIO;
-+		goto out;
-+	}
-+	if (!devm_request_mem_region(&pdev->dev, res_mem->start,
-+					resource_size(res_mem),
-+				     res_mem->name)) {
-+		dev_err(&pdev->dev, "request_mem_region failed\n");
-+		err = -ENXIO;
-+		goto out;
-+	}
-+	gpio->register_base = (u64)devm_ioremap(&pdev->dev, res_mem->start,
-+						resource_size(res_mem));
-+
-+
-+	pdev->dev.platform_data = chip;
-+	chip->label = "octeon-gpio";
-+	chip->dev = &pdev->dev;
-+	chip->owner = THIS_MODULE;
-+	chip->base = 0;
-+	chip->can_sleep = 0;
-+	chip->ngpio = 20;
-+	chip->direction_input = octeon_gpio_dir_in;
-+	chip->get = octeon_gpio_get;
-+	chip->direction_output = octeon_gpio_dir_out;
-+	chip->set = octeon_gpio_set;
-+	err = gpiochip_add(chip);
-+	if (err)
-+		goto out;
-+
-+	dev_info(&pdev->dev, "version: " DRV_VERSION "\n");
-+out:
-+	return err;
-+}
-+
-+static int octeon_gpio_remove(struct platform_device *pdev)
-+{
-+	struct gpio_chip *chip = pdev->dev.platform_data;
-+	return gpiochip_remove(chip);
-+}
-+
-+static struct of_device_id octeon_gpio_match[] = {
-+	{
-+		.compatible = "cavium,octeon-3860-gpio",
-+	},
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, octeon_gpio_match);
-+
-+static struct platform_driver octeon_gpio_driver = {
-+	.probe		= octeon_gpio_probe,
-+	.remove		= octeon_gpio_remove,
-+	.driver = {
-+		.name		= "octeon_gpio",
-+		.owner		= THIS_MODULE,
-+		.of_match_table = octeon_gpio_match,
-+	},
-+};
-+
-+module_platform_driver(octeon_gpio_driver);
-+
-+MODULE_DESCRIPTION(DRV_DESCRIPTION);
-+MODULE_AUTHOR("David Daney");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-Index: linux-3.10.49/arch/mips/Kconfig
-===================================================================
---- linux-3.10.49.orig/arch/mips/Kconfig	2014-08-07 11:41:14.809169838 +0200
-+++ linux-3.10.49/arch/mips/Kconfig	2014-08-07 11:41:16.521169817 +0200
-@@ -769,6 +769,7 @@
- 	select USB_ARCH_HAS_OHCI
- 	select USB_ARCH_HAS_EHCI
- 	select HOLES_IN_ZONE
-+	select ARCH_REQUIRE_GPIOLIB
- 	help
- 	  This option supports all of the Octeon reference boards from Cavium
- 	  Networks. It builds a kernel that dynamically determines the Octeon