ipq806x: Add support for IPQ806x chip family

Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334

1 files changed, 135 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches/0088-soc-qcom-Add-device-tree-binding-for-GSBI.patch b/target/linux/ipq806x/patches/0088-soc-qcom-Add-device-tree-binding-for-GSBI.patch
new file mode 100644
index 0000000000..39762c1be7
--- /dev/null
+++ b/target/linux/ipq806x/patches/0088-soc-qcom-Add-device-tree-binding-for-GSBI.patch
@@ -0,0 +1,135 @@
+From 5a58dbf4d82c29f7e6d89abc3520bed1aa2af05c Mon Sep 17 00:00:00 2001
+From: Andy Gross <agross@codeaurora.org>
+Date: Thu, 24 Apr 2014 11:31:20 -0500
+Subject: [PATCH 088/182] soc: qcom: Add device tree binding for GSBI
+
+Add device tree binding support for the QCOM GSBI driver.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Kumar Gala <galak@codeaurora.org>
+---
+ .../devicetree/bindings/soc/qcom/qcom,gsbi.txt     |   78 ++++++++++++++++++++
+ include/dt-bindings/soc/qcom,gsbi.h                |   26 +++++++
+ 2 files changed, 104 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+ create mode 100644 include/dt-bindings/soc/qcom,gsbi.h
+
+diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+new file mode 100644
+index 0000000..4ce24d4
+--- /dev/null
++++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+@@ -0,0 +1,78 @@
++QCOM GSBI (General Serial Bus Interface) Driver
++
++The GSBI controller is modeled as a node with zero or more child nodes, each
++representing a serial sub-node device that is mux'd as part of the GSBI
++configuration settings.  The mode setting will govern the input/output mode of
++the 4 GSBI IOs.
++
++Required properties:
++- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
++- reg: Address range for GSBI registers
++- clocks: required clock
++- clock-names: must contain "iface" entry
++- qcom,mode : indicates MUX value for configuration of the serial interface.
++  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
++
++Optional properties:
++- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
++  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
++
++Required properties if child node exists:
++- #address-cells: Must be 1
++- #size-cells: Must be 1
++- ranges: Must be present
++
++Properties for children:
++
++A GSBI controller node can contain 0 or more child nodes representing serial
++devices.  These serial devices can be a QCOM UART, I2C controller, spi
++controller, or some combination of aforementioned devices.
++
++See the following for child node definitions:
++Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
++Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
++Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
++
++Example for APQ8064:
++
++#include <dt-bindings/soc/qcom,gsbi.h>
++
++	gsbi4@16300000 {
++		compatible = "qcom,gsbi-v1.0.0";
++		reg = <0x16300000 0x100>;
++		clocks = <&gcc GSBI4_H_CLK>;
++		clock-names = "iface";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++		qcom,mode = <GSBI_PROT_I2C_UART>;
++		qcom,crci = <GSBI_CRCI_QUP>;
++
++		/* child nodes go under here */
++
++		i2c_qup4: i2c@16380000 {
++		        compatible = "qcom,i2c-qup-v1.1.1";
++		        reg = <0x16380000 0x1000>;
++		        interrupts = <0 153 0>;
++
++		        clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
++		        clock-names = "core", "iface";
++
++		        clock-frequency = <200000>;
++
++		        #address-cells = <1>;
++		        #size-cells = <0>;
++
++		 };
++
++		uart4:	serial@16340000 {
++			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
++			reg = <0x16340000 0x1000>,
++				<0x16300000 0x1000>;
++			interrupts = <0 152 0x0>;
++			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
++			clock-names = "core", "iface";
++			status = "ok";
++		};
++	};
++
+diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h
+new file mode 100644
+index 0000000..7ac4292
+--- /dev/null
++++ b/include/dt-bindings/soc/qcom,gsbi.h
+@@ -0,0 +1,26 @@
++/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#ifndef __DT_BINDINGS_QCOM_GSBI_H
++#define __DT_BINDINGS_QCOM_GSBI_H
++
++#define GSBI_PROT_IDLE		0
++#define GSBI_PROT_I2C_UIM	1
++#define GSBI_PROT_I2C		2
++#define GSBI_PROT_SPI		3
++#define GSBI_PROT_UART_W_FC	4
++#define GSBI_PROT_UIM		5
++#define GSBI_PROT_I2C_UART	6
++
++#define GSBI_CRCI_QUP		0
++#define GSBI_CRCI_UART		1
++
++#endif
+-- 
+1.7.10.4
+