ipq806x: update stmmac to the version from linux 4.3

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47593

1 files changed, 0 insertions, 427 deletions

diff --git a/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch b/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch
deleted file mode 100644
index fa6740476b..0000000000
--- a/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch
+++ /dev/null
@@ -1,427 +0,0 @@
-From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Fri, 8 May 2015 16:10:22 -0700
-Subject: [PATCH 4/8] stmmac: add ipq806x glue layer
-
-The ethernet controller available in IPQ806x is a Synopsys DesignWare
-Gigabit MAC IP core, already supported by the stmmac driver.
-
-This glue layer implements some platform specific settings required to
-get the controller working on an IPQ806x based platform.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- drivers/net/ethernet/stmicro/stmmac/Kconfig        |   1 +
- drivers/net/ethernet/stmicro/stmmac/Makefile       |   2 +-
- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c    | 324 +++++++++++++++++++++
- .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
- .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |   1 +
- 5 files changed, 328 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c
-
---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
-+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
-@@ -16,6 +16,7 @@ if STMMAC_ETH
- config STMMAC_PLATFORM
- 	bool "STMMAC Platform bus support"
- 	depends on STMMAC_ETH
-+	select MFD_SYSCON
- 	default y
- 	---help---
- 	  This selects the platform specific bus support for
-@@ -26,6 +27,15 @@ config STMMAC_PLATFORM
- 
- 	  If unsure, say N.
- 
-+config DWMAC_IPQ806X
-+	bool "QCA IPQ806x dwmac support"
-+	depends on STMMAC_PLATFORM && ARCH_QCOM
-+	help
-+	  Support for Ethernet controller on QCA IPQ806x SoC.
-+
-+	  This selects the QCA IPQ806x SoC glue layer support for
-+	  the stmmac device driver.
-+
- config DWMAC_MESON
- 	bool "Amlogic Meson dwmac support"
- 	depends on STMMAC_PLATFORM && ARCH_MESON
---- a/drivers/net/ethernet/stmicro/stmmac/Makefile
-+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
-@@ -1,6 +1,7 @@
- obj-$(CONFIG_STMMAC_ETH) += stmmac.o
- stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
- stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
-+stmmac-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
- stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
- stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
- stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
-@@ -46,6 +46,9 @@ static const struct of_device_id stmmac_
- #ifdef CONFIG_DWMAC_SOCFPGA
- 	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
- #endif
-+#ifdef CONFIG_DWMAC_IPQ806X
-+	{ .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
-+#endif
- 	/* SoC specific glue layers should come before generic bindings */
- 	{ .compatible = "st,spear600-gmac"},
- 	{ .compatible = "snps,dwmac-3.610"},
---- /dev/null
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
-@@ -0,0 +1,343 @@
-+/*
-+ * Qualcomm Atheros IPQ806x GMAC glue layer
-+ *
-+ * Copyright (C) 2015 The Linux Foundation
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy.h>
-+#include <linux/regmap.h>
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/of_net.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/stmmac.h>
-+#include <linux/of_mdio.h>
-+
-+#include "stmmac.h"
-+
-+#define NSS_COMMON_CLK_GATE			0x8
-+#define NSS_COMMON_CLK_GATE_PTP_EN(x)		BIT(0x10 + x)
-+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x)	BIT(0x9 + (x * 2))
-+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x)	BIT(0x8 + (x * 2))
-+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x)	BIT(0x4 + x)
-+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x)	BIT(0x0 + x)
-+
-+#define NSS_COMMON_CLK_DIV0			0xC
-+#define NSS_COMMON_CLK_DIV_OFFSET(x)		(x * 8)
-+#define NSS_COMMON_CLK_DIV_MASK			0x7f
-+
-+#define NSS_COMMON_CLK_SRC_CTRL			0x14
-+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x)	(1 << x)
-+/* Mode is coded on 1 bit but is different depending on the MAC ID:
-+ * MAC0: QSGMII=0 RGMII=1
-+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
-+ * MAC2 & MAC3: QSGMII=0 SGMII=1
-+ */
-+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x)	1
-+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x)	((x >= 2) ? 1 : 0)
-+
-+#define NSS_COMMON_MACSEC_CTL			0x28
-+#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x)	(1 << x)
-+
-+#define NSS_COMMON_GMAC_CTL(x)			(0x30 + (x * 4))
-+#define NSS_COMMON_GMAC_CTL_CSYS_REQ		BIT(19)
-+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL	BIT(16)
-+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET	8
-+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET		0
-+#define NSS_COMMON_GMAC_CTL_IFG_MASK		0x3f
-+
-+#define NSS_COMMON_CLK_DIV_RGMII_1000		1
-+#define NSS_COMMON_CLK_DIV_RGMII_100		9
-+#define NSS_COMMON_CLK_DIV_RGMII_10		99
-+#define NSS_COMMON_CLK_DIV_SGMII_1000		0
-+#define NSS_COMMON_CLK_DIV_SGMII_100		4
-+#define NSS_COMMON_CLK_DIV_SGMII_10		49
-+
-+#define QSGMII_PCS_MODE_CTL			0x68
-+#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x)	BIT((x * 8) + 7)
-+
-+#define QSGMII_PCS_CAL_LCKDT_CTL		0x120
-+#define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
-+
-+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
-+#define QSGMII_PHY_SGMII_CTL(x)			((x == 1) ? 0x134 : \
-+						 (0x13c + (4 * (x - 2))))
-+#define QSGMII_PHY_CDR_EN			BIT(0)
-+#define QSGMII_PHY_RX_FRONT_EN			BIT(1)
-+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN		BIT(2)
-+#define QSGMII_PHY_TX_DRIVER_EN			BIT(3)
-+#define QSGMII_PHY_QSGMII_EN			BIT(7)
-+#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET	12
-+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK		0x7
-+#define QSGMII_PHY_RX_DC_BIAS_OFFSET		18
-+#define QSGMII_PHY_RX_DC_BIAS_MASK		0x3
-+#define QSGMII_PHY_RX_INPUT_EQU_OFFSET		20
-+#define QSGMII_PHY_RX_INPUT_EQU_MASK		0x3
-+#define QSGMII_PHY_CDR_PI_SLEW_OFFSET		22
-+#define QSGMII_PHY_CDR_PI_SLEW_MASK		0x3
-+#define QSGMII_PHY_TX_DRV_AMP_OFFSET		28
-+#define QSGMII_PHY_TX_DRV_AMP_MASK		0xf
-+
-+struct ipq806x_gmac {
-+	struct platform_device *pdev;
-+	struct regmap *nss_common;
-+	struct regmap *qsgmii_csr;
-+	uint32_t id;
-+	struct clk *core_clk;
-+	phy_interface_t phy_mode;
-+};
-+
-+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
-+{
-+	struct device *dev = &gmac->pdev->dev;
-+	int div;
-+
-+	switch (speed) {
-+	case SPEED_1000:
-+		div = NSS_COMMON_CLK_DIV_SGMII_1000;
-+		break;
-+
-+	case SPEED_100:
-+		div = NSS_COMMON_CLK_DIV_SGMII_100;
-+		break;
-+
-+	case SPEED_10:
-+		div = NSS_COMMON_CLK_DIV_SGMII_10;
-+		break;
-+
-+	default:
-+		dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
-+		return -EINVAL;
-+	}
-+
-+	return div;
-+}
-+
-+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
-+{
-+	struct device *dev = &gmac->pdev->dev;
-+	int div;
-+
-+	switch (speed) {
-+	case SPEED_1000:
-+		div = NSS_COMMON_CLK_DIV_RGMII_1000;
-+		break;
-+
-+	case SPEED_100:
-+		div = NSS_COMMON_CLK_DIV_RGMII_100;
-+		break;
-+
-+	case SPEED_10:
-+		div = NSS_COMMON_CLK_DIV_RGMII_10;
-+		break;
-+
-+	default:
-+		dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
-+		return -EINVAL;
-+	}
-+
-+	return div;
-+}
-+
-+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
-+{
-+	uint32_t clk_bits, val;
-+	int div;
-+
-+	switch (gmac->phy_mode) {
-+	case PHY_INTERFACE_MODE_RGMII:
-+		div = get_clk_div_rgmii(gmac, speed);
-+		clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
-+			   NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
-+		break;
-+
-+	case PHY_INTERFACE_MODE_SGMII:
-+		div = get_clk_div_sgmii(gmac, speed);
-+		clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
-+			   NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
-+		break;
-+
-+	default:
-+		dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-+			phy_modes(gmac->phy_mode));
-+		return -EINVAL;
-+	}
-+
-+	/* Disable the clocks */
-+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
-+	val &= ~clk_bits;
-+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
-+
-+	/* Set the divider */
-+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
-+	val &= ~(NSS_COMMON_CLK_DIV_MASK
-+		 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
-+	val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
-+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
-+
-+	/* Enable the clock back */
-+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
-+	val |= clk_bits;
-+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
-+
-+	return 0;
-+}
-+
-+static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
-+{
-+	struct device *dev = &gmac->pdev->dev;
-+
-+	gmac->phy_mode = of_get_phy_mode(dev->of_node);
-+	if (gmac->phy_mode < 0) {
-+		dev_err(dev, "missing phy mode property\n");
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
-+		dev_err(dev, "missing qcom id property\n");
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	/* The GMACs are called 1 to 4 in the documentation, but to simplify the
-+	 * code and keep it consistent with the Linux convention, we'll number
-+	 * them from 0 to 3 here.
-+	 */
-+	if (gmac->id < 0 || gmac->id > 3) {
-+		dev_err(dev, "invalid gmac id\n");
-+		return ERR_PTR(-EINVAL);
-+	}
-+
-+	gmac->core_clk = devm_clk_get(dev, "stmmaceth");
-+	if (IS_ERR(gmac->core_clk)) {
-+		dev_err(dev, "missing stmmaceth clk property\n");
-+		return gmac->core_clk;
-+	}
-+	clk_set_rate(gmac->core_clk, 266000000);
-+
-+	/* Setup the register map for the nss common registers */
-+	gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
-+							   "qcom,nss-common");
-+	if (IS_ERR(gmac->nss_common)) {
-+		dev_err(dev, "missing nss-common node\n");
-+		return gmac->nss_common;
-+	}
-+
-+	/* Setup the register map for the qsgmii csr registers */
-+	gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
-+							   "qcom,qsgmii-csr");
-+	if (IS_ERR(gmac->qsgmii_csr)) {
-+		dev_err(dev, "missing qsgmii-csr node\n");
-+		return gmac->qsgmii_csr;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void *ipq806x_gmac_setup(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct ipq806x_gmac *gmac;
-+	int val;
-+	void *err;
-+
-+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
-+	if (!gmac)
-+		return ERR_PTR(-ENOMEM);
-+
-+	gmac->pdev = pdev;
-+
-+	err = ipq806x_gmac_of_parse(gmac);
-+	if (err) {
-+		dev_err(dev, "device tree parsing error\n");
-+		return err;
-+	}
-+
-+	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
-+		     QSGMII_PCS_CAL_LCKDT_CTL_RST);
-+
-+	/* Inter frame gap is set to 12 */
-+	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
-+	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
-+	/* We also initiate an AXI low power exit request */
-+	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
-+	switch (gmac->phy_mode) {
-+	case PHY_INTERFACE_MODE_RGMII:
-+		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
-+		break;
-+	case PHY_INTERFACE_MODE_SGMII:
-+		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
-+		break;
-+	default:
-+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-+			phy_modes(gmac->phy_mode));
-+		return NULL;
-+	}
-+	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
-+
-+	/* Configure the clock src according to the mode */
-+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
-+	val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
-+	switch (gmac->phy_mode) {
-+	case PHY_INTERFACE_MODE_RGMII:
-+		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
-+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
-+		break;
-+	case PHY_INTERFACE_MODE_SGMII:
-+		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
-+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
-+		break;
-+	default:
-+		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
-+			phy_modes(gmac->phy_mode));
-+		return NULL;
-+	}
-+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
-+
-+	/* Enable PTP clock */
-+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
-+	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
-+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
-+
-+	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
-+		regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
-+			     QSGMII_PHY_CDR_EN |
-+			     QSGMII_PHY_RX_FRONT_EN |
-+			     QSGMII_PHY_RX_SIGNAL_DETECT_EN |
-+			     QSGMII_PHY_TX_DRIVER_EN |
-+			     QSGMII_PHY_QSGMII_EN |
-+			     0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
-+			     0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
-+			     0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
-+			     0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
-+			     0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
-+	}
-+
-+	return gmac;
-+}
-+
-+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
-+{
-+	struct ipq806x_gmac *gmac = priv;
-+
-+	ipq806x_gmac_set_speed(gmac, speed);
-+}
-+
-+const struct stmmac_of_data ipq806x_gmac_data = {
-+	.has_gmac	= 1,
-+	.setup		= ipq806x_gmac_setup,
-+	.fix_mac_speed	= ipq806x_gmac_fix_mac_speed,
-+};
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
-@@ -137,6 +137,9 @@ void stmmac_disable_eee_mode(struct stmm
- bool stmmac_eee_init(struct stmmac_priv *priv);
- 
- #ifdef CONFIG_STMMAC_PLATFORM
-+#ifdef CONFIG_DWMAC_IPQ806X
-+extern const struct stmmac_of_data ipq806x_gmac_data;
-+#endif
- #ifdef CONFIG_DWMAC_MESON
- extern const struct stmmac_of_data meson6_dwmac_data;
- #endif