several cleanups for ifxmips. removes all code that has not been cleaned up properly

SVN-Revision: 18008

1 files changed, 0 insertions, 3658 deletions

diff --git a/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c b/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c
deleted file mode 100644
index e8787c5710..0000000000
--- a/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c
+++ /dev/null
@@ -1,3658 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_core.c
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-   1.00.01             TC Chen     Fixed cell rate calculation issue
-   				   Fixed pvovider_id of adsl mib swapping issue
-   1.00.02             TC Chen     Added L3 Low Poewr Mode support.   
-   1.00.03             TC Chen     Fixed Clear Eoc transmit issue.
-   1.00.04  31/08/2006 TC Chen     Add ADSL Link/Data Led 
-				   Add Dual Latency Path
-                                   Add AUTOBOOT_ENABLE_SET ioctl for autoboot 
-				        mode enable/disable  
-                                   Fix fast path cell rate calculation
-   1.00.05  25/09/2006 TC Chen     Fix ATM QoS fail on interface 0(fast path).
-   1.00.06  02/10/2006 TC Chen     Change ifxmips_ppe_set_cell_rate to 
-					ifx_atm_set_cell_rate
-   				   Add ATM Led callback function
-   1.00.07  13/11/2006 TC Chen	   Invert ADSL Link LED Signal
-   1.00.08  08/12/2006 TC Chen	   Fix loop diagnostic warning message issue
-   1.00.09  20/12/2006 TC Chen	   Workaround for USB OC interrupt which is trigegred once DSL reset
-******************************************************************************/
-
-/*
- * ===========================================================================
- *                           INCLUDE FILES
- * ===========================================================================
- */
-
-#include <asm/ifxmips/ifxmips_mei_linux.h>
-
-char IFXMIPS_MEI_VERSION[] = "1.00.09";
-
-#define IFXMIPS_MEI_CMV_EXTRA	//WINHOST debug
-#define IFX_ADSL_L3_MODE_SUPPORT	//L3 Low Power Mode Support
-#define IFX_ADSL_DUAL_LATENCY_SUPPORT
-#undef IFXMIPS_CLEAR_EOC		//clear eoc support
-
-// for ARC memory access
-#define WHILE_DELAY 20000
-#if defined(IFXMIPS_PORT_RTEMS)
-#undef IFXMIPS_DMA_DEBUG_MUTEX
-#else
-#define IFXMIPS_DMA_DEBUG_MUTEX
-#endif
-
-#define IMAGE_SWAP
-#define BOOT_SWAP
-#define HEADER_SWAP
-
-//TODO
-#undef DFE_LOOPBACK		// testing code //undefined by Henry , start to real link test.
-		    //165203:henryhsu 
-
-#ifdef DFE_LOOPBACK
-//#define DFE_MEM_TEST
-//#define DFE_PING_TEST
-#define DFE_ATM_LOOPBACK
-#endif
-
-#undef DATA_LED_ON_MODE
-#define DATA_LED_SUPPORT	// support adsl data led
-//#define DATA_LED_ADSL_FW_HANDLE // adsl data led handle by firmware
-#define CONFIG_IFXMIPS_MEI_LED	// adsl led support
-
-//  Block size per BAR
-#define SDRAM_SEGMENT_SIZE	(64*1024)
-// Number of Bar registers
-#define MAX_BAR_REGISTERS	(17)
-
-#define XDATA_REGISTER		(15)
-
-#define IFXMIPS_MEI_DEVNAME "mei"
-
-#ifdef DFE_LOOPBACK
-#ifndef UINT32
-#define UINT32 unsigned long
-#endif
-#ifdef DFE_PING_TEST
-#include "dsp_xmem_arb_rand_em.h"
-#endif
-#ifdef DFE_MEM_TEST
-#include "aai_mem_test.h"
-#endif
-#ifdef DFE_ATM_LOOPBACK
-#include "aai_lpbk_dyn_rate.h"
-#endif
-#endif
-
-/************************************************************************
- *  Function declaration
- ************************************************************************/
-static MEI_ERROR meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
-static MEI_ERROR meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize);
-static void meiControlModeSwitch (int mode);
-static void meiPollForDbgDone (void);
-static MEI_ERROR _meiDebugLongWordRead (u32 DEC_mode, u32 address,
-					u32 * data);
-static MEI_ERROR _meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data);
-MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
-static MEI_ERROR meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize);
-static MEI_ERROR meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize);
-static MEI_ERROR meiDownloadBootCode (void);
-static MEI_ERROR meiHaltArc (void);
-static MEI_ERROR meiRunArc (void);
-static MEI_ERROR meiRunAdslModem (void);
-static int meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer,
-		       u32 * Dest);
-void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
-	      u16 * data, u16 * CMVMSG);
-MEI_ERROR meiCMV (u16 * request, int reply, u16 * response);
-static void meiMailboxInterruptsDisable (void);
-static void meiMailboxInterruptsEnable (void);
-static int update_bar_register (int nTotalBar);
-static int free_image_buffer (int type);
-static int alloc_processor_memory (unsigned long size,
-				   smmu_mem_info_t * adsl_mem_info);
-ssize_t mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff);
-int mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
-	       unsigned long lon);
-
-#ifdef CONFIG_PROC_FS
-static int proc_read (struct file *file, char *buf, size_t nbytes,
-		      loff_t * ppos);
-static ssize_t proc_write (struct file *file, const char *buffer,
-			   size_t count, loff_t * ppos);
-#endif
-
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-int mei_mib_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
-		   unsigned long lon);
-int mei_mib_adsl_link_up (void);
-int mei_mib_adsl_link_down (void);
-int ifxmips_mei_mib_init (void);
-int ifxmips_mei_mib_cleanup (void);
-#endif
-#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
-static int ifxmips_mei_led_init (void);
-static int ifxmips_mei_led_cleanup (void);
-static int adsl_led_flash_task (void);
-#endif
-// for clearEoC 
-#ifdef IFXMIPS_CLEAR_EOC
-extern void ifx_push_eoc (struct sk_buff *pkt);
-#endif
-
-/************************************************************************
- *  variable declaration
- ************************************************************************/
-static smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
-static unsigned long image_size = 0;
-static struct timeval time_disconnect, time_showtime;
-static u16 unavailable_seconds = 0;
-#ifdef IFXMIPS_CLEAR_EOC
-static wait_queue_head_t wait_queue_hdlc_poll;	///clear eoc
-#endif
-
-static int showtime_lock_flag = 0;
-static int quiet_mode_flag = 0;
-
-int showtime = 0;
-static int major = IFXMIPS_MEI_MAJOR;
-MEI_mutex_t mei_sema;
-
-// Mei to ARC CMV count, reply count, ARC Indicator count
-static int indicator_count = 0;
-static int cmv_count = 0;
-static int reply_count = 0;
-static u16 Recent_indicator[MSG_LENGTH];
-static int reset_arc_flag = 0;
-
-// Used in interrupt handler as flags
-static int arcmsgav = 0;
-static int cmv_reply = 0;
-static int cmv_waiting = 0;
-static int modem_ready = 0;
-//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
-static wait_queue_head_t wait_queue_arcmsgav;
-
-// CMV mailbox messages
-// ARC to MEI message
-static u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
-// MEI to ARC message
-static u16 CMV_TxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
-
-static u32 *mei_arc_swap_buff = NULL;	//  holding swap pages
-static ARC_IMG_HDR *img_hdr;
-static int arc_halt_flag = 0;
-static int nBar = 0;		// total bars to be used.
-
-static u32 loop_diagnostics_mode = 0;
-wait_queue_head_t wait_queue_loop_diagnostic;
-int loop_diagnostics_completed = 0;
-u32 adsl_mode, adsl_mode_extend;	// adsl mode : adsl/ 2/ 2+
-static int autoboot_enable_flag = 0;
-
-#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
-static u8 bDualLatency = 0;
-#endif
-
-#ifdef IFXMIPS_CLEAR_EOC
-static u16 ceoc_read_idx = 0;
-#endif
-
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-static wait_queue_head_t wait_queue_l3;	// l3 power mode 
-static int l3_shutdown = 0;
-int get_l3_power_status (void);
-#endif
-
-#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
-int led_status_on = 0, led_need_to_flash = 0;
-static int stop_led_module = 0;	//wakeup and clean led module
-static wait_queue_head_t wait_queue_led_polling;	// adsl led
-#endif
-
-static struct file_operations mei_operations = {
-      write : mei_write,
-      ioctl : mei_ioctl,
-};
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *meidir;
-static struct file_operations proc_operations = {
-      read:proc_read,
-      write:proc_write,
-};
-static reg_entry_t regs[PROC_ITEMS];	//total items to be monitored by /proc/mei
-#define NUM_OF_REG_ENTRY	(sizeof(regs)/sizeof(reg_entry_t))
-#endif //#ifdef CONFIG_PROC_FS
-
-#ifdef DFE_LOOPBACK
-unsigned char got_int = 0;
-#endif
-
-/////////////////               mei access Rd/Wr methods       ///////////////
-/**
- * Write a value to register 
- * This function writes a value to ifxmips register
- * 
- * \param  	ul_address	The address to write
- * \param  	ul_data		The value to write
- * \ingroup	Internal
- */
-static void
-meiLongwordWrite (u32* ul_address, u32 ul_data)
-{
-	ifxmips_w32(ul_data, ul_address);
-	wmb();
-	return;
-}				//    end of "meiLongwordWrite(..."
-
-/**
- * Read the ifxmips register 
- * This function read the value from ifxmips register
- * 
- * \param  	ul_address	The address to write
- * \param  	pul_data	Pointer to the data
- * \ingroup	Internal
- */
-static void
-meiLongwordRead (u32* ul_address, u32 * pul_data)
-{
-	//*pul_data = *((volatile u32 *)ul_address);
-	*pul_data = ifxmips_r32(ul_address);
-	wmb();
-	return;
-}				//    end of "meiLongwordRead(..."
-
-/**
- * Write several DWORD datas to ARC memory via ARC DMA interface
- * This function writes several DWORD datas to ARC memory via DMA interface.
- * 
- * \param  	destaddr	The address to write
- * \param  	databuff	Pointer to the data buffer
- * \param  	databuffsize	Number of DWORDs to write
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize)
-{
-	u32 *p = databuff;
-	u32 temp;
-	MEI_intstat_t flags;
-
-	if (destaddr & 3)
-		return MEI_FAILURE;
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_LOCKINT (flags);
-#endif
-
-	//printk("destaddr=%X,size=%d\n",destaddr,databuffsize);
-	//      Set the write transfer address
-	meiLongwordWrite (MEI_XFR_ADDR, destaddr);
-
-	//      Write the data pushed across DMA
-	while (databuffsize--) {
-		temp = *p;
-		if (databuff == (u32 *) CMV_TxMsg)
-			MEI_HALF_WORD_SWAP (temp);
-		meiLongwordWrite (MEI_DATA_XFR, temp);
-		p++;
-	}			//    end of "while(..."
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_UNLOCKINT (flags);
-#endif
-
-	return MEI_SUCCESS;
-
-}				//    end of "meiDMAWrite(..."
-
-/**
- * Read several DWORD datas from ARC memory via ARC DMA interface
- * This function reads several DWORD datas from ARC memory via DMA interface.
- * 
- * \param  	srcaddr		The address to read
- * \param  	databuff	Pointer to the data buffer
- * \param  	databuffsize	Number of DWORDs to read
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize)
-{
-	u32 *p = databuff;
-	u32 temp;
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_intstat_t flags;
-#endif
-	//printk("destaddr=%X,size=%X\n",srcaddr,databuffsize);
-	if (srcaddr & 3)
-		return MEI_FAILURE;
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_LOCKINT (flags);
-#endif
-
-	//      Set the read transfer address
-	meiLongwordWrite (MEI_XFR_ADDR, srcaddr);
-
-	//      Read the data popped across DMA
-	while (databuffsize--) {
-		meiLongwordRead (MEI_DATA_XFR, &temp);
-		if (databuff == (u32 *) CMV_RxMsg)	// swap half word
-			MEI_HALF_WORD_SWAP (temp);
-		*p = temp;
-		p++;
-	}			//    end of "while(..."
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_UNLOCKINT (flags);
-#endif
-
-	return MEI_SUCCESS;
-
-}				//    end of "meiDMARead(..."
-
-/**
- * Switch the ARC control mode
- * This function switchs the ARC control mode to JTAG mode or MEI mode
- * 
- * \param  	mode		The mode want to switch: JTAG_MASTER_MODE or MEI_MASTER_MODE.
- * \ingroup	Internal
- */
-static void
-meiControlModeSwitch (int mode)
-{
-	u32 temp = 0x0;
-	meiLongwordRead ( MEI_DBG_MASTER, &temp);
-	switch (mode) {
-	case JTAG_MASTER_MODE:
-		temp &= ~(HOST_MSTR);
-		break;
-	case MEI_MASTER_MODE:
-		temp |= (HOST_MSTR);
-		break;
-	default:
-		printk ("meiControlModeSwitch: unkonwn mode [%d]\n",
-				 mode);
-		return;
-	}
-	meiLongwordWrite (MEI_DBG_MASTER, temp);
-}
-
-/**
- * Poll for transaction complete signal
- * This function polls and waits for transaction complete signal.
- * 
- * \ingroup	Internal
- */
-static void
-meiPollForDbgDone (void)
-{
-	u32 query = 0;
-	int i = 0;
-	while (i < WHILE_DELAY) {
-		meiLongwordRead (ARC_TO_MEI_INT, &query);
-		query &= (ARC_TO_MEI_DBG_DONE);
-		if (query)
-			break;
-		i++;
-		if (i == WHILE_DELAY) {
-			printk ("\n\n PollforDbg fail");
-		}
-	}
-	meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE);	// to clear this interrupt
-}				//    end of "meiPollForDbgDone(..."
-
-/**
- * ARC Debug Memory Access for a single DWORD reading.
- * This function used for direct, address-based access to ARC memory.
- * 
- * \param  	DEC_mode	ARC memory space to used
- * \param  	address	  	Address to read
- * \param  	data	  	Pointer to data
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-_meiDebugLongWordRead (u32 DEC_mode, u32 address, u32 * data)
-{
-	meiLongwordWrite ( MEI_DEBUG_DEC, DEC_mode);
-	meiLongwordWrite ( MEI_DEBUG_RAD, address);
-	meiPollForDbgDone ();
-	meiLongwordRead (MEI_DEBUG_DATA, data);
-	return MEI_SUCCESS;
-}
-
-/**
- * ARC Debug Memory Access for a single DWORD writing.
- * This function used for direct, address-based access to ARC memory.
- * 
- * \param  	DEC_mode	ARC memory space to used
- * \param  	address	  	The address to write
- * \param  	data	  	The data to write
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-_meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data)
-{
-	meiLongwordWrite (MEI_DEBUG_DEC, DEC_mode);
-	meiLongwordWrite (MEI_DEBUG_WAD, address);
-	meiLongwordWrite (MEI_DEBUG_DATA, data);
-	meiPollForDbgDone ();
-	return MEI_SUCCESS;
-}
-
-/**
- * ARC Debug Memory Access for writing.
- * This function used for direct, address-based access to ARC memory.
- * 
- * \param  	destaddr	The address to ead
- * \param  	databuffer  	Pointer to data
- * \param	databuffsize	The number of DWORDs to read
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-
-MEI_ERROR
-meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize)
-{
-	u32 i;
-	u32 temp = 0x0;
-	u32 address = 0x0;
-	u32 *buffer = 0x0;
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_intstat_t flags;
-#endif
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_LOCKINT (flags);
-#endif
-
-	//      Open the debug port before DMP memory write
-	meiControlModeSwitch (MEI_MASTER_MODE);
-
-	meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-
-	//      For the requested length, write the address and write the data
-	address = destaddr;
-	buffer = databuff;
-	for (i = 0; i < databuffsize; i++) {
-		temp = *buffer;
-		_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, address,
-					temp);
-		address += 4;
-		buffer++;
-	}			//    end of "for(..."
-
-	//      Close the debug port after DMP memory write
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_UNLOCKINT (flags);
-#endif
-
-	//      Return
-	return MEI_SUCCESS;
-
-}				//    end of "meiDebugWrite(..."
-
-/**
- * ARC Debug Memory Access for reading.
- * This function used for direct, address-based access to ARC memory.
- * 
- * \param  	srcaddr	  	The address to read
- * \param  	databuffer  	Pointer to data
- * \param	databuffsize	The number of DWORDs to read
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize)
-{
-	u32 i;
-	u32 temp = 0x0;
-	u32 address = 0x0;
-	u32 *buffer = 0x0;
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_intstat_t flags;
-#endif
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_LOCKINT (flags);
-#endif
-
-	//      Open the debug port before DMP memory read
-	meiControlModeSwitch (MEI_MASTER_MODE);
-
-	meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
-
-	//      For the requested length, write the address and read the data
-	address = srcaddr;
-	buffer = databuff;
-	for (i = 0; i < databuffsize; i++) {
-		_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, address,
-				       &temp);
-		*buffer = temp;
-		address += 4;
-		buffer++;
-	}			//    end of "for(..."
-
-	//      Close the debug port after DMP memory read
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-#ifdef IFXMIPS_DMA_DEBUG_MUTEX
-	MEI_UNLOCKINT (flags);
-#endif
-
-	//      Return
-	return MEI_SUCCESS;
-
-}				//    end of "meiDebugRead(..."
-
-/**
- * Send a message to ARC MailBox.
- * This function sends a message to ARC Mailbox via ARC DMA interface.
- * 
- * \param  	msgsrcbuffer  	Pointer to message.
- * \param	msgsize		The number of words to write.
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize)
-{
-	int i;
-	u32 arc_mailbox_status = 0x0;
-	u32 temp = 0;
-	MEI_ERROR meiMailboxError = MEI_SUCCESS;
-
-	//      Write to mailbox
-	meiMailboxError =
-		meiDMAWrite (MEI_TO_ARC_MAILBOX, (u32 *) msgsrcbuffer,
-			     msgsize / 2);
-	meiMailboxError =
-		meiDMAWrite (MEI_TO_ARC_MAILBOXR, (u32 *) (&temp), 1);
-
-	//      Notify arc that mailbox write completed
-	cmv_waiting = 1;
-	meiLongwordWrite (MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
-
-	i = 0;
-	while (i < WHILE_DELAY) {	// wait for ARC to clear the bit
-		meiLongwordRead ( MEI_TO_ARC_INT, &arc_mailbox_status);
-		if ((arc_mailbox_status & MEI_TO_ARC_MSGAV) !=
-		    MEI_TO_ARC_MSGAV)
-			break;
-		i++;
-		if (i == WHILE_DELAY) {
-			printk
-				("\n\n MEI_TO_ARC_MSGAV not cleared by ARC");
-			meiMailboxError = MEI_FAILURE;
-		}
-	}
-
-	//      Return
-	return meiMailboxError;
-
-}				//    end of "meiMailboxWrite(..."
-
-/**
- * Read a message from ARC MailBox.
- * This function reads a message from ARC Mailbox via ARC DMA interface.
- * 
- * \param  	msgsrcbuffer  	Pointer to message.
- * \param	msgsize		The number of words to read
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiMailboxRead (u16 * msgdestbuffer, u16 msgsize)
-{
-	MEI_ERROR meiMailboxError = MEI_SUCCESS;
-	//      Read from mailbox
-	meiMailboxError =
-		meiDMARead (ARC_TO_MEI_MAILBOX, (u32 *) msgdestbuffer,
-			    msgsize / 2);
-
-	//      Notify arc that mailbox read completed
-	meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-
-	//      Return
-	return meiMailboxError;
-
-}				//    end of "meiMailboxRead(..."
-
-/**
- * Download boot pages to ARC.
- * This function downloads boot pages to ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiDownloadBootPages (void)
-{
-	int boot_loop;
-	int page_size;
-	u32 dest_addr;
-
-	/*
-	 **     DMA the boot code page(s)
-	 */
-#ifndef HEADER_SWAP
-	for (boot_loop = 1; boot_loop < le32_to_cpu (img_hdr->count);
-	     boot_loop++)
-#else
-	for (boot_loop = 1; boot_loop < (img_hdr->count); boot_loop++)
-#endif
-	{
-#ifndef HEADER_SWAP
-		if (le32_to_cpu (img_hdr->page[boot_loop].p_size) & BOOT_FLAG)
-#else
-		if ((img_hdr->page[boot_loop].p_size) & BOOT_FLAG)
-#endif
-		{
-			page_size =
-				meiGetPage (boot_loop, GET_PROG, MAXSWAPSIZE,
-					    mei_arc_swap_buff, &dest_addr);
-			if (page_size > 0) {
-				meiDMAWrite (dest_addr, mei_arc_swap_buff,
-					     page_size);
-			}
-		}
-#ifndef HEADER_SWAP
-		if (le32_to_cpu (img_hdr->page[boot_loop].d_size) & BOOT_FLAG)
-#else
-		if ((img_hdr->page[boot_loop].d_size) & BOOT_FLAG)
-#endif
-		{
-			page_size =
-				meiGetPage (boot_loop, GET_DATA, MAXSWAPSIZE,
-					    mei_arc_swap_buff, &dest_addr);
-			if (page_size > 0) {
-				meiDMAWrite (dest_addr, mei_arc_swap_buff,
-					     page_size);
-			}
-		}
-	}
-	return MEI_SUCCESS;
-}
-
-/**
- * Initial efuse rar.
- **/
-static void
-mei_fuse_rar_init (void)
-{
-	u32 data = 0;
-	meiDMAWrite (IRAM0_BASE, &data, 1);
-	meiDMAWrite (IRAM0_BASE + 4, &data, 1);
-	meiDMAWrite (IRAM1_BASE, &data, 1);
-	meiDMAWrite (IRAM1_BASE + 4, &data, 1);
-	meiDMAWrite (BRAM_BASE, &data, 1);
-	meiDMAWrite (BRAM_BASE + 4, &data, 1);
-	meiDMAWrite (ADSL_DILV_BASE, &data, 1);
-	meiDMAWrite (ADSL_DILV_BASE + 4, &data, 1);
-}
-
-/**
- * efuse rar program
- **/
-static void
-mei_fuse_prg (void)
-{
-	u32 reg_data, fuse_value;
-	int i = 0;
-	meiLongwordRead ( IFXMIPS_RCU_RST, &reg_data);
-	while ((reg_data & 0x10000000) == 0) {
-		meiLongwordRead ( IFXMIPS_RCU_RST, &reg_data);
-		//add a watchdog
-		i++;
-		/* 0x4000 translate to  about 16 ms@111M, so should be enough */
-		if (i == 0x4000)
-			return;
-	}
-	// STEP a: Prepare memory for external accesses
-	// Write fuse_en bit24
-	meiLongwordRead (IFXMIPS_RCU_RST, &reg_data);
-	meiLongwordWrite (IFXMIPS_RCU_RST, reg_data | (1 << 24));
-
-	mei_fuse_rar_init ();
-	for (i = 0; i < 4; i++) {
-		meiLongwordRead((u32*)(IFXMIPS_FUSE_BASE_ADDR + (i * 4)), &fuse_value);
-		switch (fuse_value & 0xF0000) {
-		case 0x80000:
-			reg_data =
-				((fuse_value & RX_DILV_ADDR_BIT_MASK) |
-				 (RX_DILV_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (ADSL_DILV_BASE, &reg_data, 1);
-			break;
-		case 0x90000:
-			reg_data =
-				((fuse_value & RX_DILV_ADDR_BIT_MASK) |
-				 (RX_DILV_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (ADSL_DILV_BASE + 4, &reg_data, 1);
-			break;
-		case 0xA0000:
-			reg_data =
-				((fuse_value & IRAM0_ADDR_BIT_MASK) |
-				 (IRAM0_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (IRAM0_BASE, &reg_data, 1);
-			break;
-		case 0xB0000:
-			reg_data =
-				((fuse_value & IRAM0_ADDR_BIT_MASK) |
-				 (IRAM0_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (IRAM0_BASE + 4, &reg_data, 1);
-			break;
-		case 0xC0000:
-			reg_data =
-				((fuse_value & IRAM1_ADDR_BIT_MASK) |
-				 (IRAM1_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (IRAM1_BASE, &reg_data, 1);
-			break;
-		case 0xD0000:
-			reg_data =
-				((fuse_value & IRAM1_ADDR_BIT_MASK) |
-				 (IRAM1_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (IRAM1_BASE + 4, &reg_data, 1);
-			break;
-		case 0xE0000:
-			reg_data =
-				((fuse_value & BRAM_ADDR_BIT_MASK) |
-				 (BRAM_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (BRAM_BASE, &reg_data, 1);
-			break;
-		case 0xF0000:
-			reg_data =
-				((fuse_value & BRAM_ADDR_BIT_MASK) |
-				 (BRAM_ADDR_BIT_MASK + 0x1));
-			meiDMAWrite (BRAM_BASE + 4, &reg_data, 1);
-			break;
-		default:	// PPE efuse
-			break;
-		}
-	}
-	meiLongwordRead (IFXMIPS_RCU_RST, &reg_data);
-	meiLongwordWrite (IFXMIPS_RCU_RST, reg_data & 0xF7FFFFFF);
-}
-
-/**
- * Download boot code to ARC.
- * This function downloads boot code to ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiDownloadBootCode (void)
-{
-	u32 arc_debug_data = ACL_CLK_MODE_ENABLE;	//0x10
-
-	meiMailboxInterruptsDisable ();
-
-	//      Switch arc control from JTAG mode to MEI mode
-	meiControlModeSwitch (MEI_MASTER_MODE);
-	//enable ac_clk signal  
-	_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
-			       &arc_debug_data);
-	arc_debug_data |= ACL_CLK_MODE_ENABLE;
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
-				arc_debug_data);
-	//Switch arc control from MEI mode to JTAG mode
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-	mei_fuse_prg ();	//program fuse rar
-
-	meiDownloadBootPages ();
-
-	return MEI_SUCCESS;
-
-}				//    end of "meiDownloadBootCode(..."
-
-//#endif
-
-/**
- * Halt the ARC.
- * This function halts the ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiHaltArc (void)
-{
-	u32 arc_debug_data = 0x0;
-
-	//      Switch arc control from JTAG mode to MEI mode
-	meiControlModeSwitch (MEI_MASTER_MODE);
-	_meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG,
-			       &arc_debug_data);
-	arc_debug_data |= (BIT1);
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG,
-				arc_debug_data);
-	//      Switch arc control from MEI mode to JTAG mode
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-	arc_halt_flag = 1;
-
-	MEI_WAIT (10);
-	//      Return
-	return MEI_SUCCESS;
-
-}				//    end of "meiHalt(..."
-
-/**
- * Run the ARC.
- * This function runs the ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiRunArc (void)
-{
-	u32 arc_debug_data = 0x0;
-
-	//      Switch arc control from JTAG mode to MEI mode- write '1' to bit0
-	meiControlModeSwitch (MEI_MASTER_MODE);
-	_meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS,
-			       &arc_debug_data);
-
-	//      Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
-	arc_debug_data &= ~(BIT25);
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS,
-				arc_debug_data);
-
-	//      Switch arc control from MEI mode to JTAG mode- write '0' to bit0
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-	//      Enable mask for arc codeswap interrupts
-	meiMailboxInterruptsEnable ();
-	arc_halt_flag = 0;
-
-	//      Return
-	return MEI_SUCCESS;
-
-}				//    end of "meiActivate(..."
-
-/**
- * Reset the ARC.
- * This function resets the ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiResetARC (void)
-{
-
-	u32 arc_debug_data = 0;
-	showtime = 0;
-
-	meiHaltArc ();
-
-	meiLongwordRead (IFXMIPS_RCU_RST, &arc_debug_data);
-	meiLongwordWrite (IFXMIPS_RCU_RST,
-			  arc_debug_data | IFXMIPS_RCU_RST_REQ_DFE |
-			  IFXMIPS_RCU_RST_REQ_AFE);
-	meiLongwordWrite (IFXMIPS_RCU_RST, arc_debug_data);
-	// reset ARC
-	meiLongwordWrite(MEI_RST_CONTROL, MEI_SOFT_RESET);
-	meiLongwordWrite(MEI_RST_CONTROL, 0);
-
-	meiMailboxInterruptsDisable ();
-	MEI_MUTEX_INIT (mei_sema, 1);
-	reset_arc_flag = 1;
-	modem_ready = 0;
-	return MEI_SUCCESS;
-}
-
-/**
- * Reset the ARC, download boot codes, and run the ARC.
- * This function resets the ARC, downloads boot codes to ARC, and runs the ARC.
- * 
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-static MEI_ERROR
-meiRunAdslModem (void)
-{
-	int nSize = 0, idx = 0;
-
-	img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address;
-#if	defined(HEADER_SWAP)
-	if ((img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) > SDRAM_SEGMENT_SIZE)
-#else //define(HEADER_SWAP)
-	if (le32_to_cpu (img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) >
-	    SDRAM_SEGMENT_SIZE)
-#endif //define(HEADER_SWAP)
-	{
-		printk
-			("segment_size is smaller than firmware header size\n");
-		return -1;
-	}
-	// check image size 
-	for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
-		nSize += adsl_mem_info[idx].nCopy;
-	}
-	if (nSize != image_size) {
-		printk
-			("Firmware download is not completed. \nPlease download firmware again!\n");
-		return -1;
-	}
-	// TODO: check crc
-	///
-	if (reset_arc_flag == 0) {
-		u32 arc_debug_data;
-
-		meiResetARC ();
-		meiControlModeSwitch (MEI_MASTER_MODE);
-		//enable ac_clk signal  
-		_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
-				       &arc_debug_data);
-		arc_debug_data |= ACL_CLK_MODE_ENABLE;
-		_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
-					arc_debug_data);
-		meiControlModeSwitch (JTAG_MASTER_MODE);
-		meiHaltArc ();
-		update_bar_register (nBar);
-	}
-	reset_arc_flag = 0;
-	if (arc_halt_flag == 0) {
-		meiHaltArc ();
-	}
-	printk ("Starting to meiDownloadBootCode\n");
-
-	meiDownloadBootCode();
- 
-	// 1.00.09  20/12/2006 TC Chen
-	// disable USB OC interrupt, reset DSL chip will triger OC interrupt
-	disable_irq(IFXMIPS_USB_OC_INT);
-
-	meiRunArc ();
-
-	MEI_WAIT (100);		//wait 100ms 
-
-	//1.00.09  20/12/2006 TC Chen
-	// restore USB OC interrupt
-	MEI_MASK_AND_ACK_IRQ(IFXMIPS_USB_OC_INT);
-	enable_irq(IFXMIPS_USB_OC_INT);
-
-	if (modem_ready != 1) {
-		printk ("Running ADSL modem firmware fail!\n");
-		return MEI_FAILURE;
-	}
-
-
-	return MEI_SUCCESS;
-}
-
-/**
- * Get the page's data pointer
- * This function caculats the data address from the firmware header.
- * 
- * \param	Page		The page number.
- * \param	data		Data page or program page.
- * \param	MaxSize		The maximum size to read.
- * \param	Buffer		Pointer to data.
- * \param	Dest		Pointer to the destination address.
- * \return	The number of bytes to read.
- * \ingroup	Internal
- */
-static int
-meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer, u32 * Dest)
-{
-	u32 size;
-	u32 i;
-	u32 *p;
-	u32 idx, offset, nBar = 0;
-
-	if (Page > img_hdr->count)
-		return -2;
-	/*
-	 **     Get program or data size, depending on "data" flag
-	 */
-#ifndef HEADER_SWAP
-	size = (data ==
-		GET_DATA) ? le32_to_cpu (img_hdr->page[Page].
-					 d_size) : le32_to_cpu (img_hdr->
-								page[Page].
-								p_size);
-#else
-	size = (data ==
-		GET_DATA) ? (img_hdr->page[Page].d_size) : (img_hdr->
-							    page[Page].
-							    p_size);
-#endif
-	size &= BOOT_FLAG_MASK;	//      Clear boot bit!
-	if (size > MaxSize)
-		return -1;
-
-	if (size == 0)
-		return 0;
-	/*
-	 **     Get program or data offset, depending on "data" flag
-	 */
-#ifndef HEADER_SWAP
-	i = data ? le32_to_cpu (img_hdr->page[Page].
-				d_offset) : le32_to_cpu (img_hdr->page[Page].
-							 p_offset);
-#else
-	i = data ? (img_hdr->page[Page].d_offset) : (img_hdr->page[Page].
-						     p_offset);
-#endif
-
-	/*
-	 **     Copy data/program to buffer
-	 */
-
-	idx = i / SDRAM_SEGMENT_SIZE;
-	offset = i % SDRAM_SEGMENT_SIZE;
-	p = (u32 *) ((u8 *) adsl_mem_info[idx].address + offset);
-
-	for (i = 0; i < size; i++) {
-		if (offset + i * 4 - (nBar * SDRAM_SEGMENT_SIZE) >=
-		    SDRAM_SEGMENT_SIZE) {
-			idx++;
-			nBar++;
-			p = (u32 *) ((u8 *)
-				     KSEG1ADDR ((u32) adsl_mem_info[idx].
-						address));
-		}
-		Buffer[i] = *p++;
-#ifdef BOOT_SWAP
-#ifndef IMAGE_SWAP
-		Buffer[i] = le32_to_cpu (Buffer[i]);
-#endif
-#endif
-	}
-
-	/*
-	 **     Pass back data/program destination address
-	 */
-#ifndef HEADER_SWAP
-	*Dest = data ? le32_to_cpu (img_hdr->page[Page].
-				    d_dest) : le32_to_cpu (img_hdr->
-							   page[Page].p_dest);
-#else
-	*Dest = data ? (img_hdr->page[Page].d_dest) : (img_hdr->page[Page].
-						       p_dest);
-#endif
-
-	return size;
-}
-
-////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
-
-/**
- * Compose a message.
- * This function compose a message from opcode, group, address, index, size, and data
- * 
- * \param	opcode		The message opcode
- * \param	group		The message group number
- * \param	address		The message address.
- * \param	index		The message index.
- * \param	size		The number of words to read/write.
- * \param	data		The pointer to data.
- * \param	CMVMSG		The pointer to message buffer.
- * \ingroup	Internal
- */
-void
-makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,
-	 u16 * CMVMSG)
-{
-	memset (CMVMSG, 0, MSG_LENGTH * 2);
-	CMVMSG[0] = (opcode << 4) + (size & 0xf);
-	CMVMSG[1] = (((index == 0) ? 0 : 1) << 7) + (group & 0x7f);
-	CMVMSG[2] = address;
-	CMVMSG[3] = index;
-	if (opcode == H2D_CMV_WRITE)
-		memcpy (CMVMSG + 4, data, size * 2);
-	return;
-}
-
-/**
- * Send a message to ARC and read the response
- * This function sends a message to arc, waits the response, and reads the responses.
- * 
- * \param	request		Pointer to the request
- * \param	reply		Wait reply or not.
- * \param	response	Pointer to the response
- * \return	MEI_SUCCESS or MEI_FAILURE
- * \ingroup	Internal
- */
-MEI_ERROR
-meiCMV (u16 * request, int reply, u16 * response)	// write cmv to arc, if reply needed, wait for reply
-{
-	MEI_ERROR meierror;
-#if defined(IFXMIPS_PORT_RTEMS)
-	int delay_counter = 0;
-#endif
-
-	cmv_reply = reply;
-	memcpy (CMV_TxMsg, request, MSG_LENGTH * 2);
-	arcmsgav = 0;
-
-	meierror = meiMailboxWrite (CMV_TxMsg, MSG_LENGTH);
-
-	if (meierror != MEI_SUCCESS) {
-		cmv_waiting = 0;
-		arcmsgav = 0;
-		printk ("\n\n MailboxWrite Fail.");
-		return meierror;
-	}
-	else {
-		cmv_count++;
-	}
-
-	if (cmv_reply == NO_REPLY)
-		return MEI_SUCCESS;
-
-#if !defined(IFXMIPS_PORT_RTEMS)
-	if (arcmsgav == 0)
-		MEI_WAIT_EVENT_TIMEOUT (wait_queue_arcmsgav, CMV_TIMEOUT);
-#else
-	while (arcmsgav == 0 && delay_counter < CMV_TIMEOUT / 5) {
-		MEI_WAIT (5);
-		delay_counter++;
-	}
-#endif
-
-	cmv_waiting = 0;
-	if (arcmsgav == 0) {	//CMV_timeout
-		arcmsgav = 0;
-		printk ("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n");
-		return MEI_MAILBOX_TIMEOUT;
-	}
-	else {
-		arcmsgav = 0;
-		reply_count++;
-		memcpy (response, CMV_RxMsg, MSG_LENGTH * 2);
-		return MEI_SUCCESS;
-	}
-	return MEI_SUCCESS;
-}
-
-/////////////////////          Interrupt handler     /////////////////////////
-/**
- * Disable ARC to MEI interrupt
- * 
- * \ingroup	Internal
- */
-static void
-meiMailboxInterruptsDisable (void)
-{
-	meiLongwordWrite (ARC_TO_MEI_INT_MASK, 0x0);
-}				//    end of "meiMailboxInterruptsDisable(..."
-
-/**
- * Eable ARC to MEI interrupt
- * 
- * \ingroup	Internal
- */
-static void
-meiMailboxInterruptsEnable (void)
-{
-	meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN);
-}				//    end of "meiMailboxInterruptsEnable(..."
-
-/**
- * MEI interrupt handler
- * 
- * \param int1	
- * \param void0
- * \param regs	Pointer to the structure of ifxmips mips registers
- * \ingroup	Internal
- */
-irqreturn_t
-mei_interrupt_arcmsgav (int int1, void *void0)
-{
-	u32 scratch;
-
-#if defined(DFE_LOOPBACK) && defined(DFE_PING_TEST)
-	dfe_loopback_irq_handler ();
-	goto out;
-#endif //DFE_LOOPBACK
-
-	meiDebugRead (ARC_MEI_MAILBOXR, &scratch, 1);
-	if (scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) {
-		printk("\n\n Receive Code Swap Request interrupt!!!");
-		goto out;
-	}
-	else if (scratch & OMB_CLEAREOC_INTERRUPT_CODE)	// clear eoc message interrupt
-	{
-		meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-#if defined (IFXMIPS_CLEAR_EOC)
-		MEI_WAKEUP_EVENT (wait_queue_hdlc_poll);
-#endif
-		MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
-		goto out;
-	}
-	else {			// normal message
-		meiMailboxRead (CMV_RxMsg, MSG_LENGTH);
-#if 0
-		{
-			int msg_idx = 0;
-			printk ("got interrupt\n");
-			for (msg_idx = 0; msg_idx < MSG_LENGTH; msg_idx++) {
-				printk ("%04X ", CMV_RxMsg[msg_idx]);
-				if (msg_idx % 8 == 7)
-					printk ("\n");
-			}
-			printk ("\n");
-		}
-#endif
-		if (cmv_waiting == 1) {
-			arcmsgav = 1;
-			cmv_waiting = 0;
-#if !defined(IFXMIPS_PORT_RTEMS)
-			MEI_WAKEUP_EVENT (wait_queue_arcmsgav);
-#endif
-		}
-		else {
-			indicator_count++;
-			memcpy ((char *) Recent_indicator, (char *) CMV_RxMsg,
-				MSG_LENGTH * 2);
-			if (((CMV_RxMsg[0] & 0xff0) >> 4) == D2H_AUTONOMOUS_MODEM_READY_MSG)	// arc ready
-			{	//check ARC ready message
-				printk ("Got MODEM_READY_MSG\n");
-				modem_ready = 1;
-				MEI_MUTEX_UNLOCK (mei_sema);	// allow cmv access
-			}
-		}
-	}
-
-	MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
-out:
-	return IRQ_HANDLED;;
-}
-
-////////////////////////hdlc ////////////////
-
-/**
- * Get the hdlc status
- * 
- * \return	HDLC status
- * \ingroup	Internal
- */
-static unsigned int
-ifx_me_hdlc_status (void)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	int ret;
-
-	if (showtime != 1)
-		return -ENETRESET;
-
-	makeCMV (H2D_CMV_READ, STAT, 14, 0, 1, NULL, CMVMSG);	//Get HDLC status 
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		return -EIO;
-	}
-	return CMVMSG[4] & 0x0F;
-}
-
-/**
- * Check if the me is reslved.
- * 
- * \param	status		the me status
- * \return	ME_HDLC_UNRESOLVED or ME_HDLC_RESOLVED
- * \ingroup	Internal
- */
-int
-ifx_me_is_resloved (int status)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	int ret;
-	if (adsl_mode <= 8 && adsl_mode_extend == 0)	// adsl mode
-	{
-		makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG);	//Get ME-HDLC Control
-		ret = mei_ioctl ((struct inode *) 0, NULL,
-				 IFXMIPS_MEI_CMV_WINHOST,
-				 (unsigned long) CMVMSG);
-		if (ret != 0) {
-			return ME_HDLC_UNRESOLVED;
-		}
-		if (CMVMSG[4] & (1 << 0)) {
-			return ME_HDLC_UNRESOLVED;
-		}
-	}
-	else {
-		if (status == ME_HDLC_MSG_QUEUED
-		    || status == ME_HDLC_MSG_SENT)
-			return ME_HDLC_UNRESOLVED;
-		if (status == ME_HDLC_IDLE) {
-			makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG);	//Get ME-HDLC Control
-			ret = mei_ioctl ((struct inode *) 0, NULL,
-					 IFXMIPS_MEI_CMV_WINHOST,
-					 (unsigned long) CMVMSG);
-			if (ret != 0) {
-				return IFX_POP_EOC_FAIL;
-			}
-			if (CMVMSG[4] & (1 << 0)) {
-				return ME_HDLC_UNRESOLVED;
-			}
-		}
-	}
-	return ME_HDLC_RESOLVED;
-}
-
-int
-_ifx_me_hdlc_send (unsigned char *hdlc_pkt, int pkt_len, int max_length)
-{
-	int ret;
-	u16 CMVMSG[MSG_LENGTH];
-	u16 data = 0;
-	u16 len = 0;
-	int rx_length = 0;
-	int write_size = 0;
-
-	if (pkt_len > max_length) {
-		makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG);	//Get ME-HDLC Control
-		ret = mei_ioctl ((struct inode *) 0, NULL,
-				 IFXMIPS_MEI_CMV_WINHOST,
-				 (unsigned long) CMVMSG);
-		if (ret != 0) {
-			return -EIO;
-		}
-		rx_length = CMVMSG[4];
-		if (rx_length + max_length < pkt_len) {
-			printk ("Exceed maximum eoc rx(%d)+tx(%d) message length\n", rx_length, max_length);
-			return -EMSGSIZE;
-		}
-		data = 1;
-		makeCMV (H2D_CMV_WRITE, INFO, 85, 6, 1, &data, CMVMSG);	//disable RX Eoc
-		ret = mei_ioctl ((struct inode *) 0, NULL,
-				 IFXMIPS_MEI_CMV_WINHOST,
-				 (unsigned long) CMVMSG);
-		if (ret != 0) {
-			return -EIO;
-		}
-	}
-	while (len < pkt_len) {
-		write_size = pkt_len - len;
-		if (write_size > 24)
-			write_size = 24;
-		//printk("len=%d,write_size=%d,pkt_len=%d\n",len,write_size,pkt_len);
-		memset (CMVMSG, 0, sizeof (CMVMSG));
-		makeCMV (H2D_CMV_WRITE, INFO, 81, len / 2, (write_size + 1) / 2, (u16 *) (hdlc_pkt + len), CMVMSG);	//Write clear eoc message to ARC
-		ret = mei_ioctl ((struct inode *) 0, NULL,
-				 IFXMIPS_MEI_CMV_WINHOST,
-				 (unsigned long) CMVMSG);
-		if (ret != 0) {
-			return -EIO;
-		}
-		len += write_size;
-	}
-	makeCMV (H2D_CMV_WRITE, INFO, 83, 2, 1, &len, CMVMSG);	//Update tx message length
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		return -EIO;
-	}
-
-	data = (1 << 0);
-	makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, &data, CMVMSG);	//Start to send
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		return -EIO;
-	}
-	return 0;
-}
-
-/**
- * Send hdlc packets
- * 
- * \param	hdlc_pkt	Pointer to hdlc packet
- * \param	hdlc_pkt_len	The number of bytes to send
- * \return	success or failure.
- * \ingroup	Internal
- */
-int
-ifx_me_hdlc_send (unsigned char *hdlc_pkt, int hdlc_pkt_len)
-{
-	int hdlc_status = 0;
-	u16 CMVMSG[MSG_LENGTH];
-	int max_hdlc_tx_length = 0, ret = 0, retry = 0;
-	int power_mode = 0;
-	int send_busy_counter = 0;
-	int send_retry = 0;
-
-      HDLC_SEND:
-	// retry 1000 times (10 seconds)
-	while (retry < 1000) {
-		/* In L2 power mode, do not read the OHC related parameters, 
-		   instead give the indication to the calling IOCTL, 
-		   that the readout fails (just return -EBUSY).  */
-		power_mode = get_l3_power_status();
-		if (power_mode == L2_POWER_MODE) {
-			return -EBUSY;
-		}
-
-		hdlc_status = ifx_me_hdlc_status ();
-		if (ifx_me_is_resloved (hdlc_status) == ME_HDLC_RESOLVED)	// arc ready to send HDLC message
-		{
-			makeCMV (H2D_CMV_READ, INFO, 83, 0, 1, NULL, CMVMSG);	//Get Maximum Allowed HDLC Tx Message Length
-			ret = mei_ioctl ((struct inode *) 0, NULL,
-					 IFXMIPS_MEI_CMV_WINHOST,
-					 (unsigned long) CMVMSG);
-			if (ret != 0) {
-				printk
-					("ifx_me_hdlc_send failed. Return -EIO");
-				return -EIO;
-			}
-			max_hdlc_tx_length = CMVMSG[4];
-			ret = _ifx_me_hdlc_send (hdlc_pkt, hdlc_pkt_len,
-						 max_hdlc_tx_length);
-			return ret;
-		}
-		else {
-			if (hdlc_status == ME_HDLC_MSG_SENT)
-				send_busy_counter++;
-		}
-		retry++;
-		MEI_WAIT (1);
-	}
-	// wait 10 seconds and FW still report busy -> reset FW HDLC status
-	if (send_busy_counter > 950 && send_retry == 0) {
-		u16 data = 0;
-		send_retry = 1;
-		retry = 0;
-		printk ("Reset FW HDLC status!!\n");
-		send_busy_counter = 0;
-		data = (1 << 1);
-		makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, NULL, CMVMSG);	//Force reset to idle
-		ret = mei_ioctl ((struct inode *) 0, NULL,
-				 IFXMIPS_MEI_CMV_WINHOST,
-				 (unsigned long) CMVMSG);
-		if (ret != 0) {
-			return -EIO;
-		}
-		goto HDLC_SEND;
-	}
-	printk ("ifx_me_hdlc_send failed. Return -EBUSY");
-	return -EBUSY;
-}
-
-/**
- * Read the hdlc packets
- * 
- * \param	hdlc_pkt	Pointer to hdlc packet
- * \param	hdlc_pkt_len	The maximum number of bytes to read
- * \return	The number of bytes which reads.
- * \ingroup	Internal
- */
-int
-ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	int msg_read_len, ret = 0, pkt_len = 0, retry = 0;
-
-	while (retry < 10) {
-		ret = ifx_me_hdlc_status ();
-		if (ret == ME_HDLC_RESP_RCVD) {
-			int current_size = 0;
-			makeCMV (H2D_CMV_READ, INFO, 83, 3, 1, NULL, CMVMSG);	//Get EoC packet length
-			ret = mei_ioctl ((MEI_inode_t *) 0, NULL,
-					 IFXMIPS_MEI_CMV_WINHOST,
-					 (unsigned long) CMVMSG);
-			if (ret != 0) {
-				return -EIO;
-			}
-
-			pkt_len = CMVMSG[4];
-			if (pkt_len > max_hdlc_pkt_len) {
-				ret = -ENOMEM;
-				goto error;
-			}
-			while (current_size < pkt_len) {
-				if (pkt_len - current_size >
-				    (MSG_LENGTH * 2 - 8))
-					msg_read_len = (MSG_LENGTH * 2 - 8);
-				else
-					msg_read_len =
-						pkt_len - (current_size);
-				makeCMV (H2D_CMV_READ, INFO, 82, 0 + (current_size / 2), (msg_read_len + 1) / 2, NULL, CMVMSG);	//Get hdlc packet
-				ret = mei_ioctl ((MEI_inode_t *) 0, NULL,
-						 IFXMIPS_MEI_CMV_WINHOST,
-						 (unsigned long) CMVMSG);
-				if (ret != 0) {
-					goto error;
-				}
-				memcpy (hdlc_pkt + current_size, &CMVMSG[4],
-					msg_read_len);
-				current_size += msg_read_len;
-			}
-			ret = current_size;
-			break;
-		}
-		else {
-			ret = -ENODATA;
-		}
-
-		retry++;
-
-		MEI_WAIT (10);
-	}
-      error:
-	return ret;
-}
-
-#if defined(IFXMIPS_CLEAR_EOC)
-int
-ifx_me_ceoc_send (struct sk_buff *eoc_pkt)
-{
-	int ret, pkt_len = 0;
-	unsigned char *pkt_data_ptr;
-	int offset = 0;
-	int swap_idx = 0;
-
-	if (adsl_mode <= 8 && adsl_mode_extend == 0)	// adsl mode
-	{
-		pkt_len = eoc_pkt->len;
-
-		pkt_data_ptr = kmalloc (pkt_len + 3, GFP_KERNEL);
-
-		offset = 2;
-		pkt_data_ptr[0] = 0x4c;
-		pkt_data_ptr[1] = 0x81;
-		pkt_len += 2;
-	} else {
-		pkt_len = eoc_pkt->len + 4;
-		pkt_data_ptr = kmalloc (pkt_len + 1 + 2, GFP_KERNEL);
-		memset (pkt_data_ptr, 0, pkt_len + 1 + 2);
-		//fill clear eoc header
-		pkt_data_ptr[0] = 0x1;
-		pkt_data_ptr[1] = 0x8;
-		pkt_data_ptr[2] = 0x4c;
-		pkt_data_ptr[3] = 0x81;
-		offset = 4;
-	}
-	for (swap_idx = 0; swap_idx < (eoc_pkt->len / 2) * 2; swap_idx += 2)
-	{
-		//printk("%02X %02X ",eoc_pkt->data[swap_idx],eoc_pkt->data[swap_idx+1]);
-		pkt_data_ptr[swap_idx + offset] = eoc_pkt->data[swap_idx + 1];
-		pkt_data_ptr[swap_idx + 1 + offset] = eoc_pkt->data[swap_idx];
-	}
-	if (eoc_pkt->len % 2)
-	{
-		//printk("%02X ",eoc_pkt->data[eoc_pkt->len-1]);
-		pkt_data_ptr[eoc_pkt->len - 1 + offset] =
-			eoc_pkt->data[eoc_pkt->len - 1];
-		pkt_data_ptr[eoc_pkt->len + offset] =
-			eoc_pkt->data[eoc_pkt->len - 1];
-	}
-	ret = ifx_me_hdlc_send (pkt_data_ptr, pkt_len);
-
-	if (pkt_data_ptr != eoc_pkt->data)
-	{
-		kfree (pkt_data_ptr);
-	}
-	dev_kfree_skb (eoc_pkt);
-	return ret;
-}
-
-int
-get_me_ceoc_data (int pkt_len, int rx_buffer_addr, int rx_buffer_len,
-		  u8 * data_ptr1)
-{
-	int ret;
-	MEI_ERROR dma_ret;
-	u16 CMVMSG[MSG_LENGTH];
-	int read_size, aread_size;
-	int offset = 0;
-	u8 *data = NULL, *data_ptr = NULL;
-	int i, j;
-	int over_read = 0;
-
-	i = j = 0;
-
-	read_size = (pkt_len / 4) + 4;
-	offset = ceoc_read_idx % 4;
-	over_read = read_size * 4 - pkt_len - offset;
-
-	ceoc_read_idx = (ceoc_read_idx & 0xFFFFFFFC);
-
-	data = kmalloc (read_size * 4, GFP_KERNEL);
-	if (data == NULL)
-		goto error;
-	data_ptr = kmalloc (read_size * 4, GFP_KERNEL);
-	if (data_ptr == NULL)
-		goto error;
-	if (ceoc_read_idx + read_size * 4 >= rx_buffer_len) {
-		aread_size = (rx_buffer_len - ceoc_read_idx) / 4;
-	}
-	else {
-		aread_size = read_size;
-	}
-
-	//printk("aread_size = %d,ceoc_read_idx=%d,read_size=%d,offset=%d\n",aread_size,ceoc_read_idx,read_size,offset);
-	dma_ret =
-		meiDebugRead (rx_buffer_addr + ceoc_read_idx, (u32 *) (data),
-			      aread_size);
-	ceoc_read_idx += aread_size * 4;
-	if (aread_size != read_size) {
-		dma_ret =
-			meiDebugRead (rx_buffer_addr,
-				      (u32 *) (data) + aread_size,
-				      read_size - aread_size);
-		ceoc_read_idx = (read_size - aread_size) * 4;
-	}
-	if (ceoc_read_idx < over_read)
-		ceoc_read_idx = rx_buffer_len + ceoc_read_idx - over_read;
-	else
-		ceoc_read_idx -= over_read;
-
-	if (offset == 0 || offset == 2) {
-		for (i = 0; i < read_size; i++) {
-			// 3412 --> 1234
-
-			for (j = 0; j < 4; j++) {
-				if (i * 4 + j - offset >= 0)
-					data_ptr[i * 4 + j - offset] =
-						data[i * 4 + (3 - j)];
-			}
-		}
-
-	}
-	else if (offset == 1) {
-		for (i = 0; i < pkt_len; i = i + 4) {
-
-			data_ptr[i + 1] = data[i + 1];
-			data_ptr[i] = data[i + 2];
-			data_ptr[i + 3] = data[i + 7];
-			data_ptr[i + 2] = data[i];
-		}
-	}
-	else if (offset == 3) {
-		for (i = 0; i < pkt_len; i = i + 4) {
-			data_ptr[i + 1] = data[i + 7];
-			data_ptr[i + 0] = data[i];
-			data_ptr[i + 3] = data[i + 5];
-			data_ptr[i + 2] = data[i + 6];
-		}
-	}
-	if (pkt_len % 2 == 1)
-		data_ptr[pkt_len - 1] = data_ptr[pkt_len];
-
-	kfree (data);
-	memcpy (data_ptr1, data_ptr, pkt_len);
-	kfree (data_ptr);
-
-	makeCMV (H2D_CMV_WRITE, INFO, 85, 3, 1, &ceoc_read_idx, CMVMSG);
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		goto error;
-	}
-
-	return dma_ret;
-      error:
-	kfree (data);
-	kfree (data_ptr);
-	return -1;
-}
-
-int
-ifx_me_ceoc_receive (int ceoc_write_idx, int rx_buffer_len,
-		     struct sk_buff **eoc_pkt)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	int pkt_len, ret;
-	u16 lsw_addr, msw_addr;
-	u32 rx_buffer_addr = 0;
-	MEI_ERROR dma_ret;
-
-	//printk("rx_buffer_len=%d,ceoc_read_idx=%d,ceoc_write_idx=%d\n",rx_buffer_len,ceoc_read_idx,ceoc_write_idx);
-	if (ceoc_write_idx > ceoc_read_idx) {
-		pkt_len = ceoc_write_idx - ceoc_read_idx;
-	}
-	else {
-		pkt_len = rx_buffer_len - ceoc_read_idx + ceoc_write_idx;
-	}
-	*eoc_pkt = dev_alloc_skb (pkt_len);
-	if (*eoc_pkt == NULL) {
-		printk ("Out of memory!\n");
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	makeCMV (H2D_CMV_READ, INFO, 85, 0, 1, NULL, CMVMSG);	//Get HDLC packet 
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		goto error;
-	}
-	lsw_addr = CMVMSG[4];
-
-	makeCMV (H2D_CMV_READ, INFO, 85, 1, 1, NULL, CMVMSG);	//Get HDLC packet 
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		goto error;
-	}
-	msw_addr = CMVMSG[4];
-	rx_buffer_addr = msw_addr << 16 | lsw_addr;
-	dma_ret =
-		get_me_ceoc_data (pkt_len, rx_buffer_addr, rx_buffer_len,
-				  (u16 *) skb_put (*eoc_pkt, pkt_len));
-	if (dma_ret != MEI_SUCCESS) {
-		ret = -EIO;
-		goto error;
-	}
-
-	return 0;
-      error:
-	if (*eoc_pkt != NULL)
-		dev_kfree_skb (*eoc_pkt);
-	return ret;
-}
-
-int
-ifx_mei_ceoc_rx (void)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	int rx_buffer_len, ret, pkt_len = 0;
-	struct sk_buff *eoc_pkt;
-	u16 ceoc_write_idx = 0;
-
-	makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG);	//Get EoC packet length
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		printk ("ioctl fail!!\n");
-	}
-	rx_buffer_len = CMVMSG[4];
-
-	makeCMV (H2D_CMV_READ, INFO, 85, 4, 1, NULL, CMVMSG);	//Get write index
-	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
-			 (unsigned long) CMVMSG);
-	if (ret != 0) {
-		return -EIO;
-	}
-
-	ceoc_write_idx = CMVMSG[4];
-	ret = ifx_me_ceoc_receive (ceoc_write_idx, rx_buffer_len, &eoc_pkt);
-#if defined (CONFIG_ATM_IFXMIPS)
-	if (ret == 0) {
-		skb_pull (eoc_pkt, 2);	// skip 4c 81 header
-		ifx_push_ceoc (eoc_pkt);	//pass data to higher layer
-	}
-
-	return ret;
-#endif
-}
-
-static int
-adsl_clear_eoc_poll (void *unused)
-{
-	struct task_struct *tsk = current;
-
-	daemonize("mei_eoc_poll");
-	strcpy(tsk->comm, "mei_ceoc_poll");
-	sigfillset(&tsk->blocked);
-
-	while (1)
-	{
-		MEI_WAIT_EVENT (wait_queue_hdlc_poll);
-		if (showtime)
-			ifx_mei_ceoc_rx();
-		}
-	return 0;
-}
-#endif //#if defined(IFXMIPS_CLEAR_EOC)
-
-#ifdef IFXMIPS_CLEAR_EOC
-static int
-ifxmips_mei_ceoc_init (void)
-{
-	kernel_thread (adsl_clear_eoc_poll, NULL,
-		       CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
-	return 0;
-}
-#endif
-
-//////////////////////  Driver Structure        ///////////////////////
-
-/**
- * Free the memory for ARC firmware
- * 
- * \param	type	Free all memory or free the unused memory after showtime
- * \ingroup	Internal
- */
-static int
-free_image_buffer (int type)
-{
-	int idx = 0;
-	for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
-		printk ("meminfo[%d].type=%d,size=%ld,addr=%X\n", idx,
-				 adsl_mem_info[idx].type, adsl_mem_info[idx].size,
-				 (unsigned int)adsl_mem_info[idx].address);
-		if (type == FREE_ALL || adsl_mem_info[idx].type == type) {
-			if (adsl_mem_info[idx].size > 0) {
-				kfree (adsl_mem_info[idx].org_address);
-				adsl_mem_info[idx].address = 0;
-				adsl_mem_info[idx].size = 0;
-				adsl_mem_info[idx].type = 0;
-				adsl_mem_info[idx].nCopy = 0;
-			}
-		}
-	}
-	return 0;
-}
-
-/**
- * Allocate memory for ARC firmware
- * 
- * \param	size		The number of bytes to allocate.
- * \param	adsl_mem_info	Pointer to firmware information.
- * \ingroup	Internal
- */
-static int
-alloc_processor_memory (unsigned long size, smmu_mem_info_t * adsl_mem_info)
-{
-	char *mem_ptr = NULL;
-	char *org_mem_ptr = NULL;
-	int idx = 0;
-	long total_size = 0;
-	long img_size = size;
-	int err = 0;
-
-	// Alloc Swap Pages
-	while (img_size > 0 && idx < MAX_BAR_REGISTERS) {
-		// skip bar15 for XDATA usage.
-#ifndef DFE_LOOPBACK
-		if (idx == XDATA_REGISTER)
-			idx++;
-#endif
-		if (idx == MAX_BAR_REGISTERS - 1)
-		{
-			//allocate 1MB memory for bar16
-			org_mem_ptr = kmalloc (1024 * 1024, GFP_ATOMIC);
-			mem_ptr = (char*)((unsigned long) (org_mem_ptr +  1023) & 0xFFFFFC00);
-			adsl_mem_info[idx].size = 1024 * 1024;
-		} else {
-			org_mem_ptr = kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC);
-			mem_ptr = (char*)((unsigned long) (org_mem_ptr + 1023) & 0xFFFFFC00);
-			adsl_mem_info[idx].size = SDRAM_SEGMENT_SIZE;
-		}
-		if (org_mem_ptr == NULL)
-		{
-			printk ("kmalloc memory fail!\n");
-			err = -ENOMEM;
-			goto allocate_error;
-		}
-		adsl_mem_info[idx].address = mem_ptr;
-		adsl_mem_info[idx].org_address = org_mem_ptr;
-
-		img_size -= SDRAM_SEGMENT_SIZE;
-		total_size += SDRAM_SEGMENT_SIZE;
-		printk("alloc memory idx=%d,img_size=%ld,addr=%X\n",
-				idx, img_size, (unsigned int)adsl_mem_info[idx].address);
-		idx++;
-	}
-	if (img_size > 0)
-	{
-		printk ("Image size is too large!\n");
-		err = -EFBIG;
-		goto allocate_error;
-	}
-	err = idx;
-	return err;
-
-      allocate_error:
-	free_image_buffer (FREE_ALL);
-	return err;
-}
-
-/**
- * Program the BAR registers
- * 
- * \param	nTotalBar	The number of bar to program.
- * \ingroup	Internal
- */
-static int
-update_bar_register (int nTotalBar)
-{
-	int idx = 0;
-
-	for (idx = 0; idx < nTotalBar; idx++) {
-		//skip XDATA register
-		if (idx == XDATA_REGISTER)
-			idx++;
-		meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4,
-				  (((uint32_t) adsl_mem_info[idx].
-				    address) & 0x0FFFFFFF));
-		printk ("BAR%d=%08X, addr=%08X\n", idx,
-				 (((uint32_t) adsl_mem_info[idx].
-				   address) & 0x0FFFFFFF),
-				 (((uint32_t) adsl_mem_info[idx].address)));
-	}
-	for (idx = nTotalBar; idx < MAX_BAR_REGISTERS; idx++) {
-		if (idx == XDATA_REGISTER)
-			idx++;
-		meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4,
-				  (((uint32_t) adsl_mem_info[nTotalBar - 1].
-				    address) & 0x0FFFFFFF));
-	}
-
-	meiLongwordWrite (MEI_XMEM_BAR_BASE + XDATA_REGISTER * 4,
-			  (((uint32_t) adsl_mem_info[XDATA_REGISTER].
-			    address) & 0x0FFFFFFF));
-	// update MEI_XDATA_BASE_SH
-	printk ("update bar15 register with %08lX\n",
-			 ((unsigned long) adsl_mem_info[XDATA_REGISTER].
-			  address) & 0x0FFFFFFF);
-	meiLongwordWrite (MEI_XDATA_BASE_SH,
-			  ((unsigned long) adsl_mem_info[XDATA_REGISTER].
-			   address) & 0x0FFFFFFF);
-	return MEI_SUCCESS;
-}
-
-/**
- * Copy the firmware to BARs memory.
- * 
- * \param	filp		Pointer to the file structure.
- * \param	buf		Pointer to the data.
- * \param	size		The number of bytes to copy.
- * \param	loff		The file offset.
- * \return	The current file position.
- * \ingroup	Internal
- */
-ssize_t
-mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff)
-{
-	ARC_IMG_HDR img_hdr_tmp, *img_hdr;
-
-	size_t nRead = 0, nCopy = 0;
-	char *mem_ptr;
-	ssize_t retval = -ENOMEM;
-	int idx = 0;
-
-	if (*loff == 0) {
-		if (size < sizeof (img_hdr)) {
-			printk ("Firmware size is too small!\n");
-			return retval;
-		}
-		copy_from_user ((char *) &img_hdr_tmp, buf,
-				sizeof (img_hdr_tmp));
-		image_size = le32_to_cpu (img_hdr_tmp.size) + 8;	// header of image_size and crc are not included.
-		if (image_size > 1024 * 1024) {
-			printk ("Firmware size is too large!\n");
-			return retval;
-		}
-		// check if arc is halt
-		if (arc_halt_flag != 1) {
-			meiResetARC ();
-			meiHaltArc ();
-		}
-
-		// reset part of PPE 
-		*(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xC30;
-		*(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xFFF;
-
-		free_image_buffer (FREE_ALL);	//free all
-
-		retval = alloc_processor_memory (image_size, adsl_mem_info);
-		if (retval < 0) {
-			printk ("Error: No memory space left.\n");
-			goto error;
-		}
-
-		for (idx = 0; idx < retval; idx++) {
-			//skip XDATA register
-			if (idx == XDATA_REGISTER)
-				idx++;
-			if (idx * SDRAM_SEGMENT_SIZE <
-			    le32_to_cpu (img_hdr_tmp.page[0].p_offset)) {
-				adsl_mem_info[idx].type = FREE_RELOAD;
-			}
-			else {
-				adsl_mem_info[idx].type = FREE_SHOWTIME;
-			}
-
-		}
-		nBar = retval;
-
-		img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address;
-
-#if !defined(__LINUX__)
-		adsl_mem_info[XDATA_REGISTER].org_address =
-			kmalloc (SDRAM_SEGMENT_SIZE + 1023, GFP_ATOMIC);
-#else
-		adsl_mem_info[XDATA_REGISTER].org_address =
-			kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC);
-#endif
-		adsl_mem_info[XDATA_REGISTER].address =
-			(char
-			 *) ((unsigned long) (adsl_mem_info[XDATA_REGISTER].
-					      org_address +
-					      1023) & 0xFFFFFC00);
-		adsl_mem_info[XDATA_REGISTER].size = SDRAM_SEGMENT_SIZE;
-		if (adsl_mem_info[XDATA_REGISTER].address == NULL) {
-			printk ("kmalloc memory fail!\n");
-			retval = -ENOMEM;
-			goto error;
-		}
-		adsl_mem_info[XDATA_REGISTER].type = FREE_RELOAD;
-		update_bar_register (nBar);
-
-	}
-	else if (image_size == 0) {
-		printk ("Error: Firmware size=0! \n");
-		goto error;
-	}
-	else {
-		if (arc_halt_flag == 0) {
-			printk
-				("Please download the firmware from the beginning of the firmware!\n");
-			goto error;
-		}
-	}
-
-	nRead = 0;
-	while (nRead < size) {
-		long offset = ((long) (*loff) + nRead) % SDRAM_SEGMENT_SIZE;
-		idx = (((long) (*loff)) + nRead) / SDRAM_SEGMENT_SIZE;
-		mem_ptr = (char *)
-			KSEG1ADDR ((unsigned long) (adsl_mem_info[idx].
-						    address) + offset);
-		if ((size - nRead + offset) > SDRAM_SEGMENT_SIZE)
-			nCopy = SDRAM_SEGMENT_SIZE - offset;
-		else
-			nCopy = size - nRead;
-		copy_from_user (mem_ptr, buf + nRead, nCopy);
-#ifdef IMAGE_SWAP
-		for (offset = 0; offset < (nCopy / 4); offset++) {
-			((unsigned long *) mem_ptr)[offset] =
-				le32_to_cpu (((unsigned long *)
-					      mem_ptr)[offset]);
-		}
-#endif //IMAGE_SWAP
-		nRead += nCopy;
-		adsl_mem_info[idx].nCopy += nCopy;
-	}
-
-#if	( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP))
-	if (*loff == 0) {
-
-		for (idx = 0;
-		     idx <
-		     (sizeof (ARC_IMG_HDR) +
-		      (le32_to_cpu (img_hdr_tmp.count) -
-		       1) * sizeof (ARC_SWP_PAGE_HDR)) / 4; idx++) {
-			((unsigned long *) img_hdr)[idx] =
-				le32_to_cpu (((unsigned long *)
-					      img_hdr)[idx]);
-		}
-	}
-#endif //( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP))
-	printk ("size=%X,loff=%08X\n", size, (unsigned int) *loff);
-
-	*loff += size;
-	return size;
-      error:
-	free_image_buffer (FREE_ALL);
-
-	return retval;
-}
-
-/********************************************************
- * L3 Power Mode                                        *
- ********************************************************/
-/**
- * Send a CMV message.
- * This function sends a CMV message to ARC
- * 
- * \param	opcode		The message opcode
- * \param	group		The message group number
- * \param	address		The message address.
- * \param	index		The message index.
- * \param	size		The number of words to read/write.
- * \param	data		The pointer to data.
- * \param	CMVMSG		The pointer to message buffer.
- * \return	0: success 
- * \ingroup	Internal
- */
-int
-send_cmv (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, u16 * CMVMSG)
-{
-	int ret;
-
-	makeCMV(opcode, group, address, index, size, data, CMVMSG);
-	ret = mei_ioctl((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, (unsigned long)CMVMSG);
-	return ret;
-}
-
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-
-/**
- * Check the L3 request from CO
- * This function Check if CPE received the L3 request from CO
- * \return	1: got L3 request.  
- * \ingroup	Internal
- */
-int
-check_co_l3_shutdown_request (void)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	if (modem_ready == 1) {
-		if (send_cmv (H2D_CMV_READ, STAT, 4, 0, 1, NULL, CMVMSG) != 0) {
-			return -EBUSY;
-		}
-		if (CMVMSG[4] & BIT14) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/**
- * Check the L3 status
- * This function get the CPE Power Management Mode status
- * \return	0: L0 Mode
- *		2: L2 Mode
- *		3: L3 Mode
- * \ingroup	Internal
- */
-int
-get_l3_power_status (void)
-{
-	u16 CMVMSG[MSG_LENGTH];
-	if (modem_ready == 0) {
-		return L3_POWER_MODE;
-	}
-	else {
-		if (send_cmv (H2D_CMV_READ, STAT, 18, 0, 1, NULL, CMVMSG) !=
-		    0) {
-			return -EBUSY;
-		}
-		return ((int) CMVMSG[4]);
-
-	}
-	return 0;
-}
-
-/**
- * Send a L3 request to CO
- * This function send a L3 request to CO and check the CO response.
- * \return	0: Success. Others: Fail.
- * \ingroup	Internal
- */
-int
-send_l3_shutdown_cmd (void)
-{
-	u16 cmd = 0x1;
-	int nRetry = 0;
-	u16 CMVMSG[MSG_LENGTH];
-
-	if (modem_ready == 0) {
-		return -EBUSY;
-	}
-	// send l3 request to CO
-	if (send_cmv (H2D_CMV_WRITE, CNTL, 3, 0, 1, &cmd, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-      retry:
-	MEI_WAIT (10);
-
-	// check CO response
-	if (send_cmv (H2D_CMV_READ, STAT, 20, 0, 1, NULL, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-	if (CMVMSG[4] == 0) {
-		nRetry++;
-		if (nRetry < 10) {
-			goto retry;
-		}
-		else {
-			return -EBUSY;
-		}
-
-	}
-	else if (CMVMSG[4] == 1)	// reject
-	{
-		return -EPERM;
-	}
-	else if (CMVMSG[4] == 2)	// ok
-	{
-		return 0;
-	}
-	else if (CMVMSG[4] == 3)	// failure
-	{
-		return -EAGAIN;
-	}
-	return 0;
-}
-
-/**
- * Enable L3 Power Mode
- * This function send a L3 request to CO and check the CO response. Then reboot the CPE to enter L3 Mode.
- * \return	0: Success. Others: Fail.
- * \ingroup	Internal
- */
-int
-set_l3_shutdown (void)
-{
-	int ret = 0;
-	if (l3_shutdown == 0) {
-		// send l3 request to CO
-		ret = send_l3_shutdown_cmd ();
-		if (ret == 0)	//got CO ACK
-		{
-			//reboot adsl and block autoboot daemon
-			ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_REBOOT, (unsigned long)NULL);
-			l3_shutdown = 1;
-		}
-	}
-	return ret;
-}
-
-/**
- * Disable L3 Power Mode
- * This function disable L3 Mode and wake up the autoboot daemon.
- * \return	0: Success.
- * \ingroup	Internal
- */
-//l3 power mode disable
-int
-set_l3_power_on (void)
-{
-	if (l3_shutdown == 1) {
-		l3_shutdown = 0;
-		// wakeup autoboot daemon
-		MEI_WAKEUP_EVENT (wait_queue_l3);
-
-	}
-	return 0;
-}
-
-/********************************************************
- * End of L3 Power Mode                                 *
- ********************************************************/
-#endif //IFX_ADSL_L3_MODE_SUPPORT
-
-#ifdef CONFIG_IFXMIPS_MEI_LED
-/*
- *  LED Initialization function
- */
-int
-meiADSLLedInit (void)
-{
-	u16 data = 0x0600;
-	u16 CMVMSG[MSG_LENGTH];
-
-	data = 0x0400;
-#if defined(DATA_LED_SUPPORT) && defined (DATA_LED_ADSL_FW_HANDLE)
-	data |= 0x200;
-#endif
-	// Setup ADSL Link/Data LED
-	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 0, 1, &data, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-
-	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 2, 1, &data, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-
-	// Let FW to handle ADSL Link LED
-	data = 0x0a03;		//invert the LED signal as per input from Stefan on 13/11/2006
-	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 4, 1, &data, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-
-#ifdef DATA_LED_SUPPORT
-#ifdef DATA_LED_ADSL_FW_HANDLE
-
-	// Turn ADSL Data LED on
-	data = 0x0900;
-	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-#else
-	ifxmips_led_set(0x1);
-#endif
-#endif
-	return 0;
-}
-#endif
-
-#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
-/* 
- * Dual Latency Path Initialization function
- */
-int
-meiDualLatencyInit (void)
-{
-	u16 nDual = 0;
-	u16 CMVMSG[MSG_LENGTH];
-
-	// setup up stream path 
-	if (bDualLatency & DUAL_LATENCY_US_ENABLE) {
-		nDual = 2;
-	}
-	else {
-		nDual = 1;
-	}
-
-	if (send_cmv (H2D_CMV_WRITE, CNFG, 10, 0, 1, &nDual, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-
-	if (send_cmv (H2D_CMV_WRITE, CNFG, 11, 0, 1, &nDual, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-
-	// setup down stream path       
-	if (bDualLatency & DUAL_LATENCY_DS_ENABLE) {
-		nDual = 2;
-	}
-	else {
-		nDual = 1;
-	}
-
-	if (send_cmv (H2D_CMV_WRITE, CNFG, 21, 0, 1, &nDual, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-	if (send_cmv (H2D_CMV_WRITE, CNFG, 22, 0, 1, &nDual, CMVMSG) != 0) {
-		return -EBUSY;
-	}
-	return 0;
-}
-
-int
-mei_is_dual_latency_enabled (void)
-{
-	return bDualLatency;
-}
-#endif
-
-int
-meiAdslStartupInit (void)
-{
-#ifdef CONFIG_IFXMIPS_MEI_LED
-	meiADSLLedInit ();
-#endif
-#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
-	meiDualLatencyInit ();
-#endif
-	return 0;
-}
-
-/**
- * MEI IO controls for user space accessing
- * 
- * \param	ino		Pointer to the stucture of inode.
- * \param	fil		Pointer to the stucture of file.
- * \param	command		The ioctl command.
- * \param	lon		The address of data.
- * \return	Success or failure.
- * \ingroup	Internal
- */
-int
-mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
-	   unsigned long lon)
-{
-	int i;
-
-	int meierr = MEI_SUCCESS;
-	meireg regrdwr;
-	meidebug debugrdwr;
-	u32 arc_debug_data, reg_data;
-#ifdef IFXMIPS_CLEAR_EOC
-	u16 data;
-	struct sk_buff *eoc_skb;
-#endif //IFXMIPS_CLEAR_EOC
-	u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-	u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-
-	int from_kernel = 0;	//joelin
-	if (ino == (MEI_inode_t *) 0)
-		from_kernel = 1;	//joelin
-	if (command < IFXMIPS_MEI_START) {
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-		return mei_mib_ioctl (ino, fil, command, lon);
-#endif //CONFIG_IFXMIPS_MEI_MIB
-
-		if (command == IFXMIPS_MIB_LO_ATUR
-		    || command == IFXMIPS_MIB_LO_ATUC)
-			return MEI_SUCCESS;
-		printk
-			("No such ioctl command (0x%X)! MEI ADSL MIB is not supported!\n",
-			 command);
-		return -ENOIOCTLCMD;
-	}
-	else {
-		switch (command) {
-		case IFXMIPS_MEI_START:
-
-			showtime = 0;
-			loop_diagnostics_completed = 0;
-			if (time_disconnect.tv_sec == 0)
-				do_gettimeofday (&time_disconnect);
-
-			if (MEI_MUTEX_LOCK (mei_sema))	//disable CMV access until ARC ready
-			{
-				printk ("-ERESTARTSYS\n");
-				return -ERESTARTSYS;
-			}
-
-			meiMailboxInterruptsDisable ();	//disable all MEI interrupts
-			if (mei_arc_swap_buff == NULL) {
-				mei_arc_swap_buff =
-					(u32 *) kmalloc (MAXSWAPSIZE * 4,
-							 GFP_KERNEL);
-				if (mei_arc_swap_buff == NULL) {
-					printk
-						("\n\n malloc fail for codeswap buff");
-					meierr = MEI_FAILURE;
-				}
-			}
-			if (meiRunAdslModem () != MEI_SUCCESS) {
-				printk
-					("meiRunAdslModem()  error...");
-				meierr = MEI_FAILURE;
-			}
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-			/* L3 Power Mode Start */
-			if (l3_shutdown == 1) {
-				// block autoboot daemon until l3 power mode disable
-				MEI_WAIT_EVENT (wait_queue_l3);
-			}
-			/* L3 Power Mode End */
-#endif //IFX_ADSL_L3_MODE_SUPPORT
-			if (autoboot_enable_flag)
-				meiAdslStartupInit ();
-			break;
-
-		case IFXMIPS_MEI_SHOWTIME:
-			if (MEI_MUTEX_LOCK (mei_sema))
-				return -ERESTARTSYS;
-
-			do_gettimeofday (&time_showtime);
-			unavailable_seconds +=
-				time_showtime.tv_sec - time_disconnect.tv_sec;
-			time_disconnect.tv_sec = 0;
-			makeCMV (H2D_CMV_READ, RATE, 0, 0, 4, NULL, TxMessage);	//maximum allowed tx message length, in bytes
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-				printk
-					("\n\nCMV fail, Group RAGE Address 0 Index 0");
-			}
-			else {
-				u32 rate_fast;
-				u32 rate_intl;
-				rate_intl = RxMessage[4] | RxMessage[5] << 16;
-				rate_fast = RxMessage[6] | RxMessage[7] << 16;
-				// 609251:tc.chen Fix ATM QoS issue start
-				if (rate_intl && rate_fast)	// apply cell rate to each path
-				{
-#ifdef CONFIG_ATM_IFXMIPS
-					ifx_atm_set_cell_rate (1,
-							       rate_intl /
-							       (53 * 8));
-					ifx_atm_set_cell_rate (0,
-							       rate_fast /
-							       (53 * 8));
-#endif
-				}
-				else if (rate_fast)	// apply fast path cell rate to atm interface 0
-				{
-#ifdef CONFIG_ATM_IFXMIPS
-					ifx_atm_set_cell_rate (0,
-							       rate_fast /
-							       (53 * 8));
-#endif
-				}
-				else if (rate_intl)	// apply interleave path cell rate to atm interface 0
-				{
-#ifdef CONFIG_ATM_IFXMIPS
-					ifx_atm_set_cell_rate (0,
-							       rate_intl /
-							       (53 * 8));
-#endif
-				}
-				else {
-					printk ("Got rate fail.\n");
-				}
-				// 609251:tc.chen end 
-			}
-
-#ifdef IFXMIPS_CLEAR_EOC
-			data = 1;
-			makeCMV (H2D_CMV_WRITE, OPTN, 24, 0, 1, &data,
-				 TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-				printk ("Enable clear eoc fail!\n");
-			}
-#endif
-			// read adsl mode
-			makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL,
-				 TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-#ifdef IFXMIPS_MEI_DEBUG_ON
-				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-			}
-			adsl_mode = RxMessage[4];
-			makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL,
-				 TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-#ifdef IFXMIPS_MEI_DEBUG_ON
-				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-			}
-			adsl_mode_extend = RxMessage[4];
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-			mei_mib_adsl_link_up ();
-#endif
-
-//joelin 04/16/2005-start
-			makeCMV (H2D_CMV_WRITE, PLAM, 10, 0, 1,
-				 &unavailable_seconds, TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-				printk
-					("\n\nCMV fail, Group 7 Address 10 Index 0");
-			}
-
-//joelin 04/16/2005-end         
-			showtime = 1;
-			free_image_buffer (FREE_SHOWTIME);
-			MEI_MUTEX_UNLOCK (mei_sema);
-			break;
-
-		case IFXMIPS_MEI_HALT:
-			if (arc_halt_flag == 0) {
-				meiResetARC ();
-				meiHaltArc ();
-			}
-			break;
-		case IFXMIPS_MEI_RUN:
-			if (arc_halt_flag == 1) {
-				meiRunArc ();
-			}
-			break;
-		case IFXMIPS_MEI_CMV_WINHOST:
-			if (MEI_MUTEX_LOCK (mei_sema))
-				return -ERESTARTSYS;
-
-			if (!from_kernel)
-				copy_from_user ((char *) TxMessage, (char *) lon, MSG_LENGTH * 2);	//joelin
-			else
-				memcpy (TxMessage, (char *) lon,
-					MSG_LENGTH * 2);
-
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
-			    MEI_SUCCESS) {
-				printk
-					("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",
-					 TxMessage[0], TxMessage[1],
-					 TxMessage[2], TxMessage[3],
-					 RxMessage[0], RxMessage[1],
-					 RxMessage[2], RxMessage[3],
-					 RxMessage[4]);
-				meierr = MEI_FAILURE;
-			}
-			else {
-				if (!from_kernel)	//joelin
-					copy_to_user ((char *) lon,
-						      (char *) RxMessage,
-						      MSG_LENGTH * 2);
-				else
-					memcpy ((char *) lon,
-						(char *) RxMessage,
-						MSG_LENGTH * 2);
-			}
-
-			MEI_MUTEX_UNLOCK (mei_sema);
-			break;
-#ifdef IFXMIPS_MEI_CMV_EXTRA
-		case IFXMIPS_MEI_CMV_READ:
-			copy_from_user ((char *) (&regrdwr), (char *) lon,
-					sizeof (meireg));
-			meiLongwordRead ((u32*)regrdwr.iAddress, &(regrdwr.iData));
-
-			copy_to_user((char *) lon, (char *) (&regrdwr), sizeof (meireg));
-			break;
-
-		case IFXMIPS_MEI_CMV_WRITE:
-			copy_from_user ((char *) (&regrdwr), (char *) lon, sizeof (meireg));
-			meiLongwordWrite ((u32*)regrdwr.iAddress, regrdwr.iData);
-			break;
-
-		case IFXMIPS_MEI_REMOTE:
-			copy_from_user ((char *) (&i), (char *) lon,
-					sizeof (int));
-			if (i == 0) {
-				meiMailboxInterruptsEnable ();
-
-				MEI_MUTEX_UNLOCK (mei_sema);
-			}
-			else if (i == 1) {
-				meiMailboxInterruptsDisable ();
-				if (MEI_MUTEX_LOCK (mei_sema))
-					return -ERESTARTSYS;
-			}
-			else {
-				printk
-					("\n\n IFXMIPS_MEI_REMOTE argument error");
-				meierr = MEI_FAILURE;
-			}
-			break;
-
-		case IFXMIPS_MEI_READDEBUG:
-		case IFXMIPS_MEI_WRITEDEBUG:
-#if 0				//tc.chen:It is no necessary to acquire lock to read debug memory!!
-			if (MEI_MUTEX_LOCK (mei_sema))
-				return -ERESTARTSYS;
-#endif
-			if (!from_kernel)
-				copy_from_user ((char *) (&debugrdwr),
-						(char *) lon,
-						sizeof (debugrdwr));
-			else
-				memcpy ((char *) (&debugrdwr), (char *) lon,
-					sizeof (debugrdwr));
-
-			if (command == IFXMIPS_MEI_READDEBUG)
-				meiDebugRead (debugrdwr.iAddress,
-					      debugrdwr.buffer,
-					      debugrdwr.iCount);
-			else
-				meiDebugWrite (debugrdwr.iAddress,
-					       debugrdwr.buffer,
-					       debugrdwr.iCount);
-
-			if (!from_kernel)
-				copy_to_user ((char *) lon, (char *) (&debugrdwr), sizeof (debugrdwr));	//dying gasp
-#if 0				//tc.chen:It is no necessary to acquire lock to read debug memory!!
-			MEI_MUTEX_UNLOCK (mei_sema);
-#endif
-			break;
-		case IFXMIPS_MEI_RESET:
-		case IFXMIPS_MEI_REBOOT:
-
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-			mei_mib_adsl_link_down ();
-#endif
-
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-			/* L3 Power Mode start */
-			if (check_co_l3_shutdown_request () == 1)	//co request
-			{
-				// cpe received co L3 request
-				l3_shutdown = 1;
-			}
-			/* L3 Power Mode end */
-#endif //IFX_ADSL_L3_MODE_SUPPORT
-
-			meiResetARC ();
-			meiControlModeSwitch (MEI_MASTER_MODE);
-			//enable ac_clk signal  
-			_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK,
-					       CRI_CCR0, &arc_debug_data);
-			arc_debug_data |= ACL_CLK_MODE_ENABLE;
-			_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK,
-						CRI_CCR0, arc_debug_data);
-			meiControlModeSwitch (JTAG_MASTER_MODE);
-			meiHaltArc ();
-			update_bar_register (nBar);
-			break;
-		case IFXMIPS_MEI_DOWNLOAD:
-			// DMA the boot code page(s)
-			printk ("Start download pages");
-			meiDownloadBootPages ();
-			break;
-#endif //IFXMIPS_MEI_CMV_EXTRA
-			//for clearEoC
-#ifdef IFXMIPS_CLEAR_EOC
-		case IFXMIPS_MEI_EOC_SEND:
-			if (!showtime) {
-				return -EIO;
-			}
-			if (!from_kernel) {
-				copy_from_user ((char *) (&debugrdwr),
-						(char *) lon,
-						sizeof (debugrdwr));
-				eoc_skb =
-					dev_alloc_skb (debugrdwr.iCount * 4);
-				if (eoc_skb == NULL) {
-					printk
-						("\n\nskb alloc fail");
-					break;
-				}
-
-				eoc_skb->len = debugrdwr.iCount * 4;
-				memcpy (skb_put
-					(eoc_skb, debugrdwr.iCount * 4),
-					(char *) debugrdwr.buffer,
-					debugrdwr.iCount * 4);
-			}
-			else {
-				eoc_skb = (struct sk_buff *) lon;
-			}
-			ifx_me_ceoc_send (eoc_skb);	//pass data to higher layer
-			break;
-#endif // IFXMIPS_CLEAR_EOC
-		case IFXMIPS_MEI_JTAG_ENABLE:
-			printk ("ARC JTAG Enable.\n");
-			*(IFXMIPS_GPIO_P0_DIR) = (*IFXMIPS_GPIO_P0_DIR) & (~0x800);	// set gpio11 to input
-			*(IFXMIPS_GPIO_P0_ALTSEL0) = ((*IFXMIPS_GPIO_P0_ALTSEL0) & (~0x800));
-			*(IFXMIPS_GPIO_P0_ALTSEL1) = ((*IFXMIPS_GPIO_P0_ALTSEL1) & (~0x800));
-			*IFXMIPS_GPIO_P0_OD = (*IFXMIPS_GPIO_P0_OD) | 0x800;
-
-			//enable ARC JTAG
-			meiLongwordRead(IFXMIPS_RCU_RST, &reg_data);
-			meiLongwordWrite(IFXMIPS_RCU_RST, reg_data | IFXMIPS_RCU_RST_REQ_ARC_JTAG);
-			break;
-
-		case GET_ADSL_LOOP_DIAGNOSTICS_MODE:
-			copy_to_user ((char *) lon, (char *) &loop_diagnostics_mode, sizeof(int));
-			break;
-		case LOOP_DIAGNOSTIC_MODE_COMPLETE:
-			loop_diagnostics_completed = 1;
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-			// read adsl mode
-			makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL, TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-#ifdef IFXMIPS_MEI_DEBUG_ON
-				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-			}
-			adsl_mode = RxMessage[4];
-
-			makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL, TxMessage);
-			if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-#ifdef IFXMIPS_MEI_DEBUG_ON
-				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
-			}
-			adsl_mode_extend = RxMessage[4];
-#endif
-			MEI_WAKEUP_EVENT (wait_queue_loop_diagnostic);
-			break;
-		case SET_ADSL_LOOP_DIAGNOSTICS_MODE:
-			if (lon != loop_diagnostics_mode) {
-				loop_diagnostics_completed = 0;
-				loop_diagnostics_mode = lon;
-#if 0 //08/12/2006 tc.chen : autoboot daemon should reset dsl
-				mei_ioctl ((MEI_inode_t *) 0, NULL,
-					   IFXMIPS_MEI_REBOOT,
-					   (unsigned long) NULL);
-#endif
-			}
-			break;
-		case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE:
-			copy_to_user ((char *) lon,
-				      (char *) &loop_diagnostics_completed,
-				      sizeof (int));
-			break;
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-			/* L3 Power Mode Start */
-		case GET_POWER_MANAGEMENT_MODE:
-			i = get_l3_power_status ();
-			copy_to_user ((char *) lon, (char *) &i,
-				      sizeof (int));
-			break;
-		case SET_L3_POWER_MODE:
-			i = 1;
-			copy_from_user ((char *) &i, (char *) lon,
-					sizeof (int));
-			if (i == 0) {
-				return set_l3_shutdown ();
-			}
-			else {
-				return set_l3_power_on ();
-			}
-			break;
-			/* L3 Power Mode End */
-#endif //IFX_ADSL_L3_MODE_SUPPORT
-#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
-		case GET_ADSL_DUAL_LATENCY:
-			i = mei_is_dual_latency_enabled ();
-			if (i < 0)
-				return i;
-			copy_to_user ((char *) lon, (char *) &i,
-				      sizeof (int));
-			break;
-		case SET_ADSL_DUAL_LATENCY:
-			i = 0;
-			copy_from_user ((char *) &i, (char *) lon,
-					sizeof (int));
-			if (i > DUAL_LATENCY_US_DS_ENABLE) {
-				return -EINVAL;
-			}
-			if (i != bDualLatency) {
-				bDualLatency = i;
-				i = 1;	// DualLatency update,need to reboot arc
-			}
-			else {
-				i = 0;	// DualLatency is the same
-			}
-			if (modem_ready && i)	// modem is already start, reboot arc to apply Dual Latency changed
-			{
-				mei_ioctl ((MEI_inode_t *) 0, NULL,
-					   IFXMIPS_MEI_REBOOT,
-					   (unsigned long) NULL);
-			}
-			break;
-
-#endif
-		case QUIET_MODE_GET:
-			copy_to_user ((char *) lon, (char *) &quiet_mode_flag,
-				      sizeof (int));
-			break;
-		case QUIET_MODE_SET:
-			copy_from_user ((char *) &i, (char *) lon,
-					sizeof (int));
-			if (i > 1 || i < 0)
-				return -EINVAL;
-			if (i == 1) {
-				u16 CMVMSG[MSG_LENGTH];
-				u16 data = 0;
-				makeCMV (H2D_CMV_WRITE, INFO, 94, 0, 1, &data, CMVMSG);	// set tx power to 0
-				meierr = mei_ioctl ((struct inode *) 0, NULL,
-						    IFXMIPS_MEI_CMV_WINHOST,
-						    (unsigned long) CMVMSG);
-			}
-			quiet_mode_flag = i;
-			break;
-		case SHOWTIME_LOCK_GET:
-			copy_to_user ((char *) lon,
-				      (char *) &showtime_lock_flag,
-				      sizeof (int));
-			break;
-		case SHOWTIME_LOCK_SET:
-			copy_from_user ((char *) &i, (char *) lon,
-					sizeof (int));
-			if (i > 1 || i < 0)
-				return -EINVAL;
-			showtime_lock_flag = i;
-			break;
-		case AUTOBOOT_ENABLE_SET:
-			copy_from_user ((char *) &i, (char *) lon,
-					sizeof (int));
-			if (i > 1 || i < 0)
-				return -EINVAL;
-			autoboot_enable_flag = i;
-			break;
-		default:
-			printk
-				("The ioctl command(0x%X is not supported!\n",
-				 command);
-			meierr = -ENOIOCTLCMD;
-		}
-	}
-	return meierr;
-}				//mei_ioctl
-
-////////////////////     procfs debug    ///////////////////////////
-
-#ifdef CONFIG_PROC_FS
-static int
-proc_read (struct file *file, char *buf, size_t nbytes, loff_t * ppos)
-{
-	int i_ino = (file->f_dentry->d_inode)->i_ino;
-	char outputbuf[64];
-	int count = 0;
-	int i;
-	u32 version = 0;
-	reg_entry_t *current_reg = NULL;
-	u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-	u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
-
-	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
-		if (regs[i].low_ino == i_ino) {
-			current_reg = &regs[i];
-			break;
-		}
-	}
-	if (current_reg == NULL)
-		return -EINVAL;
-
-	if (current_reg->flag == (int *) 8) {
-		///proc/mei/version
-		//format:
-		//Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl
-		///Firmware Date Time Code: date/month min:hour
-		if (*ppos > 0)	/* Assume reading completed in previous read */
-			return 0;	// indicates end of file
-		if (MEI_MUTEX_LOCK (mei_sema))
-			return -ERESTARTSYS;
-
-		if (indicator_count < 1) {
-			MEI_MUTEX_UNLOCK (mei_sema);
-			return -EAGAIN;
-		}
-		//major:bits 0-7 
-		//minor:bits 8-15
-		makeCMV (H2D_CMV_READ, INFO, 54, 0, 1, NULL, TxMessage);
-		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-			MEI_MUTEX_UNLOCK (mei_sema);
-			return -EIO;
-		}
-		version = RxMessage[4];
-		count = sprintf (outputbuf, "%d.%d.", (version) & 0xff,
-				 (version >> 8) & 0xff);
-
-		//sub_version:bits 4-7
-		//int_version:bits 0-3
-		//spl_appl:bits 8-13
-		//rel_state:bits 14-15
-		makeCMV (H2D_CMV_READ, INFO, 54, 1, 1, NULL, TxMessage);
-		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-			MEI_MUTEX_UNLOCK (mei_sema);
-			return -EFAULT;
-		}
-		version = RxMessage[4];
-		count += sprintf (outputbuf + count, "%d.%d.%d.%d",
-				  (version >> 4) & 0xf,
-				  version & 0xf,
-				  (version >> 14) & 0x3,
-				  (version >> 8) & 0x3f);
-		//Date:bits 0-7
-		//Month:bits 8-15
-		makeCMV (H2D_CMV_READ, INFO, 55, 0, 1, NULL, TxMessage);
-		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-			MEI_MUTEX_UNLOCK (mei_sema);
-			return -EIO;
-		}
-		version = RxMessage[4];
-
-		//Hour:bits 0-7
-		//Minute:bits 8-15
-		makeCMV (H2D_CMV_READ, INFO, 55, 1, 1, NULL, TxMessage);
-		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
-			MEI_MUTEX_UNLOCK (mei_sema);
-			return -EFAULT;
-		}
-		version += (RxMessage[4] << 16);
-		count += sprintf (outputbuf + count, " %d/%d %d:%d\n",
-				  version & 0xff, (version >> 8) & 0xff,
-				  (version >> 25) & 0xff,
-				  (version >> 16) & 0xff);
-		MEI_MUTEX_UNLOCK (mei_sema);
-
-		*ppos += count;
-	}
-	else if (current_reg->flag != (int *) Recent_indicator) {
-		if (*ppos > 0)	/* Assume reading completed in previous read */
-			return 0;	// indicates end of file
-		count = sprintf (outputbuf, "0x%08X\n\n",
-				 *(current_reg->flag));
-		*ppos += count;
-		if (count > nbytes)	/* Assume output can be read at one time */
-			return -EINVAL;
-	}
-	else {
-		if ((int) (*ppos) / ((int) 7) == 16)
-			return 0;	// indicate end of the message
-		count = sprintf (outputbuf, "0x%04X\n\n",
-				 *(((u16 *) (current_reg->flag)) +
-				   (int) (*ppos) / ((int) 7)));
-		*ppos += count;
-	}
-	if (copy_to_user (buf, outputbuf, count))
-		return -EFAULT;
-	return count;
-}
-
-static ssize_t
-proc_write (struct file *file, const char *buffer, size_t count,
-	    loff_t * ppos)
-{
-	int i_ino = (file->f_dentry->d_inode)->i_ino;
-	reg_entry_t *current_reg = NULL;
-	int i;
-	unsigned long newRegValue;
-	char *endp;
-
-	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
-		if (regs[i].low_ino == i_ino) {
-			current_reg = &regs[i];
-			break;
-		}
-	}
-	if ((current_reg == NULL)
-	    || (current_reg->flag == (int *) Recent_indicator))
-		return -EINVAL;
-
-	newRegValue = simple_strtoul (buffer, &endp, 0);
-	*(current_reg->flag) = (int) newRegValue;
-	return (count + endp - buffer);
-}
-#endif //CONFIG_PROC_FS
-
-//TODO, for loopback test
-#ifdef DFE_LOOPBACK
-#define mte_reg_base	(0x4800*4+0x20000)
-
-/* Iridia Registers Address Constants */
-#define MTE_Reg(r)    	(int)(mte_reg_base + (r*4))
-
-#define IT_AMODE       	MTE_Reg(0x0004)
-
-#define OMBOX_BASE 	0xDF80
-#define OMBOX1 	(OMBOX_BASE+0x4)
-#define IMBOX_BASE 	0xDFC0
-
-#define TIMER_DELAY   	(1024)
-#define BC0_BYTES     	(32)
-#define BC1_BYTES     	(30)
-#define NUM_MB        	(12)
-#define TIMEOUT_VALUE 	2000
-
-static void
-BFMWait (u32 cycle)
-{
-	u32 i;
-	for (i = 0; i < cycle; i++);
-}
-
-static void
-WriteRegLong (u32 addr, u32 data)
-{
-	//*((volatile u32 *)(addr)) =  data; 
-	IFXMIPS_WRITE_REGISTER_L (data, addr);
-}
-
-static u32
-ReadRegLong (u32 addr)
-{
-	// u32  rd_val;
-	//rd_val = *((volatile u32 *)(addr));
-	// return rd_val;
-	return IFXMIPS_READ_REGISTER_L (addr);
-}
-
-/* This routine writes the mailbox with the data in an input array */
-static void
-WriteMbox (u32 * mboxarray, u32 size)
-{
-	meiDebugWrite (IMBOX_BASE, mboxarray, size);
-	printk ("write to %X\n", IMBOX_BASE);
-	meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
-}
-
-/* This routine reads the output mailbox and places the results into an array */
-static void
-ReadMbox (u32 * mboxarray, u32 size)
-{
-	meiDebugRead (OMBOX_BASE, mboxarray, size);
-	printk ("read from %X\n", OMBOX_BASE);
-}
-
-static void
-MEIWriteARCValue (u32 address, u32 value)
-{
-	u32 i, check = 0;
-
-	/* Write address register */
-	IFXMIPS_WRITE_REGISTER_L (address, MEI_DEBUG_WAD);
-
-	/* Write data register */
-	IFXMIPS_WRITE_REGISTER_L (value, MEI_DEBUG_DATA);
-
-	/* wait until complete - timeout at 40 */
-	for (i = 0; i < 40; i++) {
-		check = IFXMIPS_READ_REGISTER_L (ARC_TO_MEI_INT);
-
-		if ((check & ARC_TO_MEI_DBG_DONE))
-			break;
-	}
-	/* clear the flag */
-	IFXMIPS_WRITE_REGISTER_L (ARC_TO_MEI_DBG_DONE, ARC_TO_MEI_INT);
-}
-
-void
-arc_code_page_download (uint32_t arc_code_length, uint32_t * start_address)
-{
-	int count;
-	printk ("try to download pages,size=%d\n", arc_code_length);
-	meiControlModeSwitch (MEI_MASTER_MODE);
-	if (arc_halt_flag == 0) {
-		meiHaltArc ();
-	}
-	meiLongwordWrite ( MEI_XFR_ADDR, 0);
-	for (count = 0; count < arc_code_length; count++) {
-		meiLongwordWrite ( MEI_DATA_XFR,
-				  *(start_address + count));
-	}
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-}
-static int
-load_jump_table (unsigned long addr)
-{
-	int i;
-	uint32_t addr_le, addr_be;
-	uint32_t jump_table[32];
-	for (i = 0; i < 16; i++) {
-		addr_le = i * 8 + addr;
-		addr_be = ((addr_le >> 16) & 0xffff);
-		addr_be |= ((addr_le & 0xffff) << 16);
-		jump_table[i * 2 + 0] = 0x0f802020;
-		jump_table[i * 2 + 1] = addr_be;
-		//printk("jt %X %08X %08X\n",i,jump_table[i*2+0],jump_table[i*2+1]);
-	}
-	arc_code_page_download (32, &jump_table[0]);
-	return 0;
-}
-
-void
-dfe_loopback_irq_handler (void)
-{
-	uint32_t rd_mbox[10];
-
-	memset (&rd_mbox[0], 0, 10 * 4);
-	ReadMbox (&rd_mbox[0], 6);
-	if (rd_mbox[0] == 0x0) {
-		printk ("Get ARC_ACK\n");
-		got_int = 1;
-	}
-	else if (rd_mbox[0] == 0x5) {
-		printk ("Get ARC_BUSY\n");
-		got_int = 2;
-	}
-	else if (rd_mbox[0] == 0x3) {
-		printk ("Get ARC_EDONE\n");
-		if (rd_mbox[1] == 0x0) {
-			got_int = 3;
-			printk ("Get E_MEMTEST\n");
-			if (rd_mbox[2] != 0x1) {
-				got_int = 4;
-				printk ("Get Result %X\n",
-						 rd_mbox[2]);
-			}
-		}
-	}
-	meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE);
-	MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
-	disable_irq (IFXMIPS_MEI_INT);
-	//got_int = 1;
-	return;
-}
-
-static void
-wait_mem_test_result (void)
-{
-	uint32_t mbox[5];
-	mbox[0] = 0;
-	printk ("Waiting Starting\n");
-	while (mbox[0] == 0) {
-		ReadMbox (&mbox[0], 5);
-	}
-	printk ("Try to get mem test result.\n");
-	ReadMbox (&mbox[0], 5);
-	if (mbox[0] == 0xA) {
-		printk ("Success.\n");
-	}
-	else if (mbox[0] == 0xA) {
-		printk
-			("Fail,address %X,except data %X,receive data %X\n",
-			 mbox[1], mbox[2], mbox[3]);
-	}
-	else {
-		printk ("Fail\n");
-	}
-}
-
-static int
-arc_ping_testing (void)
-{
-#define MEI_PING 0x00000001
-	uint32_t wr_mbox[10], rd_mbox[10];
-	int i;
-	for (i = 0; i < 10; i++) {
-		wr_mbox[i] = 0;
-		rd_mbox[i] = 0;
-	}
-
-	printk ("send ping msg\n");
-	wr_mbox[0] = MEI_PING;
-	WriteMbox (&wr_mbox[0], 10);
-
-	while (got_int == 0) {
-		MEI_WAIT (100);
-	}
-
-	printk ("send start event\n");
-	got_int = 0;
-
-	wr_mbox[0] = 0x4;
-	wr_mbox[1] = 0;
-	wr_mbox[2] = 0;
-	wr_mbox[3] = (uint32_t) 0xf5acc307e;
-	wr_mbox[4] = 5;
-	wr_mbox[5] = 2;
-	wr_mbox[6] = 0x1c000;
-	wr_mbox[7] = 64;
-	wr_mbox[8] = 0;
-	wr_mbox[9] = 0;
-	WriteMbox (&wr_mbox[0], 10);
-	enable_irq (IFXMIPS_MEI_INT);
-	//printk("meiMailboxWrite ret=%d\n",i);
-	meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
-	printk ("sleeping\n");
-	while (1) {
-		if (got_int > 0) {
-
-			if (got_int > 3)
-				printk ("got_int >>>> 3\n");
-			else
-				printk ("got int = %d\n", got_int);
-			got_int = 0;
-			//schedule();
-			enable_irq (IFXMIPS_MEI_INT);
-		}
-		//mbox_read(&rd_mbox[0],6);
-		MEI_WAIT (100);
-	}
-}
-
-static MEI_ERROR
-DFE_Loopback_Test (void)
-{
-	int i = 0;
-	u32 arc_debug_data = 0, temp;
-
-	meiResetARC ();
-	// start the clock
-	arc_debug_data = ACL_CLK_MODE_ENABLE;
-	meiDebugWrite (CRI_CCR0, &arc_debug_data, 1);
-
-#if defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
-	// WriteARCreg(AUX_XMEM_LTEST,0);
-	meiControlModeSwitch (MEI_MASTER_MODE);
-#define AUX_XMEM_LTEST 0x128
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XMEM_LTEST, 0);
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-	// WriteARCreg(AUX_XDMA_GAP,0); 
-	meiControlModeSwitch (MEI_MASTER_MODE);
-#define AUX_XDMA_GAP 0x114
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XDMA_GAP, 0);
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-	meiControlModeSwitch (MEI_MASTER_MODE);
-	temp = 0;
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK,
-				(u32) MEI_XDATA_BASE_SH, temp);
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-	i = alloc_processor_memory (SDRAM_SEGMENT_SIZE * 16, adsl_mem_info);
-	if (i >= 0) {
-		int idx;
-
-		for (idx = 0; idx < i; idx++) {
-			adsl_mem_info[idx].type = FREE_RELOAD;
-			IFXMIPS_WRITE_REGISTER_L ((((uint32_t)
-						   adsl_mem_info[idx].
-						   address) & 0x0fffffff),
-						 MEI_XMEM_BAR_BASE + idx * 4);
-			printk ("bar%d(%X)=%X\n", idx,
-					 MEI_XMEM_BAR_BASE + idx * 4,
-					 (((uint32_t) adsl_mem_info[idx].
-					   address) & 0x0fffffff));
-			memset ((u8 *) adsl_mem_info[idx].address, 0,
-				SDRAM_SEGMENT_SIZE);
-		}
-
-		meiLongwordWrite ( MEI_XDATA_BASE_SH, ((unsigned long)
-							    adsl_mem_info
-							    [XDATA_REGISTER].
-							    address) &
-				  0x0FFFFFFF);
-
-	}
-	else {
-		printk ("cannot load image: no memory\n\n");
-		return MEI_FAILURE;
-	}
-	//WriteARCreg(AUX_IC_CTRL,2);
-	meiControlModeSwitch (MEI_MASTER_MODE);
-#define AUX_IC_CTRL 0x11
-	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_IC_CTRL, 2);
-	meiControlModeSwitch (JTAG_MASTER_MODE);
-
-	meiHaltArc ();
-
-#ifdef DFE_PING_TEST
-
-	printk ("ping test image size=%d\n", sizeof (code_array));
-	memcpy ((u8 *) (adsl_mem_info[0].address + 0x1004), &code_array[0],
-		sizeof (code_array));
-	load_jump_table (0x80000 + 0x1004);
-
-#endif //DFE_PING_TEST
-
-	printk ("ARC ping test code download complete\n");
-#endif //defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
-#ifdef DFE_MEM_TEST
-	meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN);
-
-	arc_code_page_download (1537, &mem_test_code_array[0]);
-	printk ("ARC mem test code download complete\n");
-#endif //DFE_MEM_TEST
-#ifdef DFE_ATM_LOOPBACK
-	arc_debug_data = 0xf;
-	arc_code_page_download (1077, &code_array[0]);
-	// Start Iridia IT_AMODE (in dmp access) why is it required?
-	meiDebugWrite (0x32010, &arc_debug_data, 1);
-#endif //DFE_ATM_LOOPBACK
-	meiMailboxInterruptsEnable ();
-	meiRunArc ();
-
-#ifdef DFE_PING_TEST
-	arc_ping_testing ();
-#endif //DFE_PING_TEST
-#ifdef DFE_MEM_TEST
-	wait_mem_test_result ();
-#endif //DFE_MEM_TEST
-
-	free_image_buffer (FREE_ALL);
-	return MEI_SUCCESS;
-}
-
-#endif //DFE_LOOPBACK
-//end of TODO, for loopback test
-
-#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
-
-/* 
- *  Led Thread Main function
- */
-static int
-led_poll (void *unused)
-{
-	struct task_struct *tsk = current;
-
-	daemonize("mei_led_poll");
-	strcpy (tsk->comm, "atm_led");
-	sigfillset (&tsk->blocked);
-
-	stop_led_module = 0;	//begin polling ...
-
-	while (!stop_led_module) {
-		if (led_status_on || led_need_to_flash) {
-			adsl_led_flash_task ();
-		}
-		if (led_status_on)	//sleep 200 ms to check if need to turn led off
-		{
-			interruptible_sleep_on_timeout
-				(&wait_queue_led_polling, 25);
-		}
-		else {
-			interruptible_sleep_on (&wait_queue_led_polling);
-		}
-	}
-	return 0;
-}
-
-/* 
- * API for atm driver to notify led thread a data coming/sending 
- */
-#if defined (CONFIG_ATM_IFXMIPS)
-static int
-adsl_led_flash (void)
-{
-	if (!modem_ready)
-		return 0;
-
-	if (led_status_on == 0 && led_need_to_flash == 0)
-	{
-		wake_up_interruptible (&wait_queue_led_polling);	//wake up and clean led module 
-	}
-	led_need_to_flash = 1;	//asking to flash led
-
-	return 0;
-}
-#endif
-/*
- * Main task for led controlling.
- */
-static int
-adsl_led_flash_task (void)
-{
-#ifdef DATA_LED_ADSL_FW_HANDLE
-	u16 one = 1;
-	u16 zero = 0;
-	u16 data = 0x0600;
-	u16 CMVMSG[MSG_LENGTH];
-#endif
-
-//      printk("Task Running...\n");    //joelin  test
-
-	if (!showtime) {
-		led_need_to_flash = 0;
-		led_status_on = 0;
-		return 0;
-	}
-
-	if (led_status_on == 0 && led_need_to_flash == 1) {
-
-#ifdef DATA_LED_ADSL_FW_HANDLE
-		data = 0x0901;	//flash
-		send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG);	//use GPIO9 for TR68 data led .flash.
-#else
-		ifxmips_led_blink_set(0x0); // data
-		ifxmips_led_blink_set(0x1); // link
-#endif
-		led_status_on = 1;
-
-	}
-	else if (led_status_on == 1 && led_need_to_flash == 0) {
-#ifdef DATA_LED_ADSL_FW_HANDLE
-#ifdef DATA_LED_ON_MODE
-		data = 0x0903;	//use GPIO9 for TR68 data led .turn on.
-#else
-		data = 0x0900;	//off
-#endif
-		printk ("off %04X\n", data);
-		send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG);	//use GPIO9 for TR68 data led .off.
-#else
-#endif
-		led_status_on = 0;
-	}
-	led_need_to_flash = 0;
-	return 0;
-}
-
-/* 
- * Led initialization function
- * This function create a thread to polling atm traffic and do led blanking
- */
-static int
-ifxmips_mei_led_init (void)
-{
-	init_waitqueue_head (&wait_queue_led_polling);	// adsl led for led function
-	kernel_thread (led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_THREAD);
-	return 0;
-}
-
-/* 
- * Led destory function
- */
-static int
-ifxmips_mei_led_cleanup (void)
-{
-	stop_led_module = 1;	//wake up and clean led module 
-	wake_up_interruptible (&wait_queue_led_polling);	//wake up and clean led module   
-	return 0;
-}
-#endif //#ifdef CONFIG_IFXMIPS_MEI_LED
-
-////////////////////////////////////////////////////////////////////////////
-int __init
-ifxmips_mei_init_module (void)
-{
-	struct proc_dir_entry *entry;
-	int i;
-	u32 temp;
-#ifdef CONFIG_DEVFS_FS
-	char buf[10];
-#endif
-	reg_entry_t regs_temp[PROC_ITEMS] =	// Items being debugged
-	{
-		/*  {   flag,                   name,              description } */
-		{&arcmsgav, "arcmsgav", "arc to mei message ", 0},
-		{&cmv_reply, "cmv_reply", "cmv needs reply", 0},
-		{&cmv_waiting, "cmv_waiting",
-		 "waiting for cmv reply from arc", 0},
-		{&indicator_count, "indicator_count",
-		 "ARC to MEI indicator count", 0},
-		{&cmv_count, "cmv_count", "MEI to ARC CMVs", 0},
-		{&reply_count, "reply_count", "ARC to MEI Reply", 0},
-		{(int *) Recent_indicator, "Recent_indicator",
-		 "most recent indicator", 0},
-		{(int *) 8, "version", "version of firmware", 0},
-	};
-	do_gettimeofday (&time_disconnect);
-
-	printk ("Danube MEI version:%s\n", IFXMIPS_MEI_VERSION);
-
-	memcpy ((char *) regs, (char *) regs_temp, sizeof (regs_temp));
-	MEI_MUTEX_INIT (mei_sema, 1);	// semaphore initialization, mutex
-	MEI_INIT_WAKELIST ("arcq", wait_queue_arcmsgav);	// for ARCMSGAV
-	MEI_INIT_WAKELIST ("arcldq", wait_queue_loop_diagnostic);	// for loop diagnostic function
-#ifdef IFX_ADSL_L3_MODE_SUPPORT
-	MEI_INIT_WAKELIST ("arcl3q", wait_queue_l3);	// for l3 power mode
-#endif //IFX_ADSL_L3_MODE_SUPPORT
-
-
-	memset (&adsl_mem_info[0], 0, sizeof (smmu_mem_info_t) * MAX_BAR_REGISTERS);
-#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
-	printk("not enabling mei leds due to bug that makes the board hang\n");
-//	ifxmips_mei_led_init ();
-#endif
-
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-	ifxmips_mei_mib_init ();
-#endif
-
-#ifdef IFXMIPS_CLEAR_EOC
-	MEI_INIT_WAKELIST ("arceoc", wait_queue_hdlc_poll);
-	ifxmips_mei_ceoc_init ();
-#endif
-	// power up mei 
-	temp = ifxmips_r32(IFXMIPS_PMU_PWDCR);
-	temp &= 0xffff7dbe;
-	ifxmips_w32(temp, IFXMIPS_PMU_PWDCR);
-
-#if defined (CONFIG_ATM_IFXMIPS)
-	IFX_ATM_LED_Callback_Register (adsl_led_flash);
-#endif
-	if (register_chrdev (major, IFXMIPS_MEI_DEVNAME, &mei_operations) != 0) {
-		printk("\n\n unable to register major for ifxmips_mei!!!");
-		return -ENODEV;
-	} else {
-		printk("registered ifxmips_mei on #%d\n", major);
-	}
-
-	disable_irq(IFXMIPS_MEI_INT);
-
-	if (request_irq(IFXMIPS_MEI_INT, mei_interrupt_arcmsgav, 0, "ifxmips_mei_arcmsgav", NULL) != 0) {
-		printk("\n\n unable to register irq(%d) for ifxmips_mei!!!",
-			IFXMIPS_MEI_INT);
-		return -1;
-	}
-
-//	enable_irq(IFXMIPS_MEI_INT);
-	// procfs
-	meidir = proc_mkdir(MEI_DIRNAME, &proc_root);
-	if (meidir == NULL)
-	{
-		printk(": can't create /proc/" MEI_DIRNAME "\n\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
-		entry = create_proc_entry (regs[i].name,
-					   S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, meidir);
-		if (entry)
-		{
-			regs[i].low_ino = entry->low_ino;
-			entry->proc_fops = &proc_operations;
-		} else {
-			printk (": can't create /proc/" MEI_DIRNAME "/%s\n\n", regs[i].name);
-			return -ENOMEM;
-		}
-	}
-
-	///////////////////////////////// register net device ////////////////////////////
-#ifdef DFE_LOOPBACK
-	DFE_Loopback_Test ();
-#endif //DFE_LOOPBACK
-	return 0;
-}
-
-void __exit
-ifxmips_mei_cleanup_module (void)
-{
-	int i;
-
-#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
-	ifxmips_mei_led_cleanup ();
-#endif
-	showtime = 0;		//joelin,clear task
-
-#ifdef CONFIG_PROC_FS
-	for (i = 0; i < NUM_OF_REG_ENTRY; i++)
-		remove_proc_entry (regs[i].name, meidir);
-
-	remove_proc_entry (MEI_DIRNAME, &proc_root);
-#endif //CONFIG_PROC_FS
-
-#if defined (CONFIG_ATM_IFXMIPS)
-	IFX_ATM_LED_Callback_Unregister (adsl_led_flash);
-#endif
-	disable_irq (IFXMIPS_MEI_INT);
-	free_irq(IFXMIPS_MEI_INT, NULL);
-
-#ifdef CONFIG_DEVFS_FS
-	devfs_unregister (mei_devfs_handle);
-#else
-	unregister_chrdev (major, "ifxmips_mei");
-#endif
-#ifdef CONFIG_IFXMIPS_MEI_MIB
-	ifxmips_mei_mib_cleanup ();
-#endif
-
-	free_image_buffer (FREE_ALL);
-	return;
-}
-
-EXPORT_SYMBOL (meiDebugRead);
-EXPORT_SYMBOL (meiDebugWrite);
-EXPORT_SYMBOL (ifx_me_hdlc_send);
-EXPORT_SYMBOL (ifx_mei_hdlc_read);
-MODULE_LICENSE ("GPL");
-
-module_init (ifxmips_mei_init_module);
-module_exit (ifxmips_mei_cleanup_module);