diff options
author | Felix Fietkau <nbd@openwrt.org> | 2010-06-26 20:42:58 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2010-06-26 20:42:58 +0000 |
commit | da1bb88a2b900f0392b731ec47c5e1bff956fd8f (patch) | |
tree | 597146471e3eeafb4ba55e802e80b896770808ff /target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch | |
parent | 6117c04c9416b295347fb45c37e430f01df1d0d9 (diff) | |
download | master-31e0f0ae-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.tar.gz master-31e0f0ae-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.tar.bz2 master-31e0f0ae-da1bb88a2b900f0392b731ec47c5e1bff956fd8f.zip |
rename target/linux/generic-2.6 to generic
SVN-Revision: 21952
Diffstat (limited to 'target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch')
-rw-r--r-- | target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch | 1231 |
1 files changed, 0 insertions, 1231 deletions
diff --git a/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch deleted file mode 100644 index f48c58052f..0000000000 --- a/target/linux/generic-2.6/patches-2.6.32/975-ssb_update.patch +++ /dev/null @@ -1,1231 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip - { - if (!cc->dev) - return; /* We don't have a ChipCommon */ -+ if (cc->dev->id.revision >= 11) -+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); - ssb_pmu_init(cc); - chipco_powercontrol_init(cc); - ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); -@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); - } -+EXPORT_SYMBOL(ssb_chipco_gpio_control); - - u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) - { ---- a/drivers/ssb/driver_chipcommon_pmu.c -+++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ - case 0x5354: - ssb_pmu0_pllinit_r0(cc, crystalfreq); - break; -+ case 0x4322: -+ if (cc->pmu.rev == 2) { -+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A); -+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0); -+ } -+ break; - default: - ssb_printk(KERN_ERR PFX - "ERROR: PLL init unknown for device %04X\n", -@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc - - switch (bus->chip_id) { - case 0x4312: -+ case 0x4322: - /* We keep the default settings: - * min_msk = 0xCBB - * max_msk = 0x7FFFF ---- a/drivers/ssb/driver_gige.c -+++ b/drivers/ssb/driver_gige.c -@@ -12,6 +12,7 @@ - #include <linux/ssb/ssb_driver_gige.h> - #include <linux/pci.h> - #include <linux/pci_regs.h> -+#include <linux/slab.h> - - - /* ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - } - break; -- /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: - case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - break; - } -+ /* fallthrough */ -+ case SSB_DEV_EXTIF: -+ set_irq(dev, 0); -+ break; - } - } - ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore - .pci_ops = &ssb_pcicore_pciops, - .io_resource = &ssb_pcicore_io_resource, - .mem_resource = &ssb_pcicore_mem_resource, -- .mem_offset = 0x24000000, - }; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- - /* This function is called when doing a pci_enable_device(). - * We must first check if the device is a device on the PCI-core bridge. */ - int ssb_pcicore_plat_dev_init(struct pci_dev *d) - { -- struct resource *res; -- int pos, size; -- u32 *base; -- - if (d->bus->ops != &ssb_pcicore_pciops) { - /* This is not a device on the PCI-core bridge. */ - return -ENODEV; -@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc - might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); - - /* Enable interrupts for this device. */ -- if (bus->host_pci && -- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { -+ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) { - u32 coremask; - - /* Calculate the "coremask" for the device. */ - coremask = (1 << dev->core_index); - -+ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI); - err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); - if (err) - goto out; ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -18,6 +18,7 @@ - #include <linux/dma-mapping.h> - #include <linux/pci.h> - #include <linux/mmc/sdio_func.h> -+#include <linux/slab.h> - - #include <pcmcia/cs_types.h> - #include <pcmcia/cs.h> -@@ -140,6 +141,19 @@ static void ssb_device_put(struct ssb_de - put_device(dev->dev); - } - -+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) -+{ -+ if (drv) -+ get_driver(&drv->drv); -+ return drv; -+} -+ -+static inline void ssb_driver_put(struct ssb_driver *drv) -+{ -+ if (drv) -+ put_driver(&drv->drv); -+} -+ - static int ssb_device_resume(struct device *dev) - { - struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -210,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) - EXPORT_SYMBOL(ssb_bus_suspend); - - #ifdef CONFIG_SSB_SPROM --int ssb_devices_freeze(struct ssb_bus *bus) -+/** ssb_devices_freeze - Freeze all devices on the bus. -+ * -+ * After freezing no device driver will be handling a device -+ * on this bus anymore. ssb_devices_thaw() must be called after -+ * a successful freeze to reactivate the devices. -+ * -+ * @bus: The bus. -+ * @ctx: Context structure. Pass this to ssb_devices_thaw(). -+ */ -+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) - { -- struct ssb_device *dev; -- struct ssb_driver *drv; -- int err = 0; -- int i; -- pm_message_t state = PMSG_FREEZE; -+ struct ssb_device *sdev; -+ struct ssb_driver *sdrv; -+ unsigned int i; -+ -+ memset(ctx, 0, sizeof(*ctx)); -+ ctx->bus = bus; -+ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); - -- /* First check that we are capable to freeze all devices. */ - for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -+ sdev = ssb_device_get(&bus->devices[i]); -+ -+ if (!sdev->dev || !sdev->dev->driver || -+ !device_is_registered(sdev->dev)) { -+ ssb_device_put(sdev); - continue; -- if (!drv->suspend) { -- /* Nope, can't suspend this one. */ -- return -EOPNOTSUPP; - } -- } -- /* Now suspend all devices */ -- for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); -+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { -+ ssb_device_put(sdev); - continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -- continue; -- err = drv->suspend(dev, state); -- if (err) { -- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", -- dev_name(dev->dev)); -- goto err_unwind; - } -+ sdrv->remove(sdev); -+ ctx->device_frozen[i] = 1; - } - - return 0; --err_unwind: -- for (i--; i >= 0; i--) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -- continue; -- if (drv->resume) -- drv->resume(dev); -- } -- return err; - } - --int ssb_devices_thaw(struct ssb_bus *bus) -+/** ssb_devices_thaw - Unfreeze all devices on the bus. -+ * -+ * This will re-attach the device drivers and re-init the devices. -+ * -+ * @ctx: The context structure from ssb_devices_freeze() -+ */ -+int ssb_devices_thaw(struct ssb_freeze_context *ctx) - { -- struct ssb_device *dev; -- struct ssb_driver *drv; -- int err; -- int i; -+ struct ssb_bus *bus = ctx->bus; -+ struct ssb_device *sdev; -+ struct ssb_driver *sdrv; -+ unsigned int i; -+ int err, result = 0; - - for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -+ if (!ctx->device_frozen[i]) - continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -+ sdev = &bus->devices[i]; -+ -+ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver)) - continue; -- if (SSB_WARN_ON(!drv->resume)) -+ sdrv = drv_to_ssb_drv(sdev->dev->driver); -+ if (SSB_WARN_ON(!sdrv || !sdrv->probe)) - continue; -- err = drv->resume(dev); -+ -+ err = sdrv->probe(sdev, &sdev->id); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", -- dev_name(dev->dev)); -+ dev_name(sdev->dev)); -+ result = err; - } -+ ssb_driver_put(sdrv); -+ ssb_device_put(sdev); - } - -- return 0; -+ return result; - } - #endif /* CONFIG_SSB_SPROM */ - -@@ -490,8 +495,7 @@ static int ssb_devices_register(struct s - #endif - break; - case SSB_BUSTYPE_SDIO: --#ifdef CONFIG_SSB_SDIO -- sdev->irq = bus->host_sdio->dev.irq; -+#ifdef CONFIG_SSB_SDIOHOST - dev->parent = &bus->host_sdio->dev; - #endif - break; -@@ -830,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b - if (!err) { - ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " - "PCI device %s\n", dev_name(&host_pci->dev)); -+ } else { -+ ssb_printk(KERN_ERR PFX "Failed to register PCI version" -+ " of SSB with error %d\n", err); - } - - return err; ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -17,6 +17,7 @@ - - #include <linux/ssb/ssb.h> - #include <linux/ssb/ssb_regs.h> -+#include <linux/slab.h> - #include <linux/pci.h> - #include <linux/delay.h> - -@@ -167,7 +168,7 @@ err_pci: - } - - /* Get the word-offset for a SSB_SPROM_XXX define. */ --#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) -+#define SPOFF(offset) ((offset) / sizeof(u16)) - /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ - #define SPEX16(_outvar, _offset, _mask, _shift) \ - out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) -@@ -253,7 +254,7 @@ static int sprom_do_read(struct ssb_bus - int i; - - for (i = 0; i < bus->sprom_size; i++) -- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); - - return 0; - } -@@ -284,7 +285,7 @@ static int sprom_do_write(struct ssb_bus - ssb_printk("75%%"); - else if (i % 2) - ssb_printk("."); -- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); - mmiowb(); - msleep(20); - } -@@ -620,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_ - int err = -ENOMEM; - u16 *buf; - -+ if (!ssb_is_sprom_available(bus)) { -+ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); -+ return -ENODEV; -+ } -+ -+ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? -+ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; -+ - buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); - if (!buf) - goto out; ---- a/drivers/ssb/pcihost_wrapper.c -+++ b/drivers/ssb/pcihost_wrapper.c -@@ -12,6 +12,7 @@ - */ - - #include <linux/pci.h> -+#include <linux/slab.h> - #include <linux/ssb/ssb.h> - - ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co - } \ - } while (0) - --int ssb_pcmcia_get_invariants(struct ssb_bus *bus, -- struct ssb_init_invariants *iv) -+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, -+ tuple_t *tuple, -+ void *priv) -+{ -+ struct ssb_sprom *sprom = priv; -+ -+ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) -+ return -EINVAL; -+ if (tuple->TupleDataLen != ETH_ALEN + 2) -+ return -EINVAL; -+ if (tuple->TupleData[1] != ETH_ALEN) -+ return -EINVAL; -+ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN); -+ return 0; -+}; -+ -+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, -+ tuple_t *tuple, -+ void *priv) - { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; -+ struct ssb_init_invariants *iv = priv; - struct ssb_sprom *sprom = &iv->sprom; - struct ssb_boardinfo *bi = &iv->boardinfo; - const char *error_description; - -+ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1"); -+ switch (tuple->TupleData[0]) { -+ case SSB_PCMCIA_CIS_ID: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 5) && -+ (tuple->TupleDataLen != 7), -+ "id tpl size"); -+ bi->vendor = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ break; -+ case SSB_PCMCIA_CIS_BOARDREV: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "boardrev tpl size"); -+ sprom->board_rev = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_PA: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 9) && -+ (tuple->TupleDataLen != 10), -+ "pa tpl size"); -+ sprom->pa0b0 = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ sprom->pa0b1 = tuple->TupleData[3] | -+ ((u16)tuple->TupleData[4] << 8); -+ sprom->pa0b2 = tuple->TupleData[5] | -+ ((u16)tuple->TupleData[6] << 8); -+ sprom->itssi_a = tuple->TupleData[7]; -+ sprom->itssi_bg = tuple->TupleData[7]; -+ sprom->maxpwr_a = tuple->TupleData[8]; -+ sprom->maxpwr_bg = tuple->TupleData[8]; -+ break; -+ case SSB_PCMCIA_CIS_OEMNAME: -+ /* We ignore this. */ -+ break; -+ case SSB_PCMCIA_CIS_CCODE: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "ccode tpl size"); -+ sprom->country_code = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_ANTENNA: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "ant tpl size"); -+ sprom->ant_available_a = tuple->TupleData[1]; -+ sprom->ant_available_bg = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_ANTGAIN: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_BFLAGS: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && -+ (tuple->TupleDataLen != 5), -+ "bfl tpl size"); -+ sprom->boardflags_lo = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ break; -+ case SSB_PCMCIA_CIS_LEDS: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 5, -+ "leds tpl size"); -+ sprom->gpio0 = tuple->TupleData[1]; -+ sprom->gpio1 = tuple->TupleData[2]; -+ sprom->gpio2 = tuple->TupleData[3]; -+ sprom->gpio3 = tuple->TupleData[4]; -+ break; -+ } -+ return -ENOSPC; /* continue with next entry */ -+ -+error: -+ ssb_printk(KERN_ERR PFX -+ "PCMCIA: Failed to fetch device invariants: %s\n", -+ error_description); -+ return -ENODEV; -+} -+ -+ -+int ssb_pcmcia_get_invariants(struct ssb_bus *bus, -+ struct ssb_init_invariants *iv) -+{ -+ struct ssb_sprom *sprom = &iv->sprom; -+ int res; -+ - memset(sprom, 0xFF, sizeof(*sprom)); - sprom->revision = 1; - sprom->boardflags_lo = 0; - sprom->boardflags_hi = 0; - - /* First fetch the MAC address. */ -- memset(&tuple, 0, sizeof(tuple)); -- tuple.DesiredTuple = CISTPL_FUNCE; -- tuple.TupleData = buf; -- tuple.TupleDataMax = sizeof(buf); -- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC first tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC first tpl data"); -- while (1) { -- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); -- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) -- break; -- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC next tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC next tpl data"); -+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, -+ ssb_pcmcia_get_mac, sprom); -+ if (res != 0) { -+ ssb_printk(KERN_ERR PFX -+ "PCMCIA: Failed to fetch MAC address\n"); -+ return -ENODEV; - } -- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); -- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); - - /* Fetch the vendor specific tuples. */ -- memset(&tuple, 0, sizeof(tuple)); -- tuple.DesiredTuple = SSB_PCMCIA_CIS; -- tuple.TupleData = buf; -- tuple.TupleDataMax = sizeof(buf); -- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN first tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN first tpl data"); -- while (1) { -- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); -- switch (tuple.TupleData[0]) { -- case SSB_PCMCIA_CIS_ID: -- GOTO_ERROR_ON((tuple.TupleDataLen != 5) && -- (tuple.TupleDataLen != 7), -- "id tpl size"); -- bi->vendor = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- break; -- case SSB_PCMCIA_CIS_BOARDREV: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "boardrev tpl size"); -- sprom->board_rev = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_PA: -- GOTO_ERROR_ON((tuple.TupleDataLen != 9) && -- (tuple.TupleDataLen != 10), -- "pa tpl size"); -- sprom->pa0b0 = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- sprom->pa0b1 = tuple.TupleData[3] | -- ((u16)tuple.TupleData[4] << 8); -- sprom->pa0b2 = tuple.TupleData[5] | -- ((u16)tuple.TupleData[6] << 8); -- sprom->itssi_a = tuple.TupleData[7]; -- sprom->itssi_bg = tuple.TupleData[7]; -- sprom->maxpwr_a = tuple.TupleData[8]; -- sprom->maxpwr_bg = tuple.TupleData[8]; -- break; -- case SSB_PCMCIA_CIS_OEMNAME: -- /* We ignore this. */ -- break; -- case SSB_PCMCIA_CIS_CCODE: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "ccode tpl size"); -- sprom->country_code = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_ANTENNA: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "ant tpl size"); -- sprom->ant_available_a = tuple.TupleData[1]; -- sprom->ant_available_bg = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_ANTGAIN: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_BFLAGS: -- GOTO_ERROR_ON((tuple.TupleDataLen != 3) && -- (tuple.TupleDataLen != 5), -- "bfl tpl size"); -- sprom->boardflags_lo = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- break; -- case SSB_PCMCIA_CIS_LEDS: -- GOTO_ERROR_ON(tuple.TupleDataLen != 5, -- "leds tpl size"); -- sprom->gpio0 = tuple.TupleData[1]; -- sprom->gpio1 = tuple.TupleData[2]; -- sprom->gpio2 = tuple.TupleData[3]; -- sprom->gpio3 = tuple.TupleData[4]; -- break; -- } -- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); -- if (res == -ENOSPC) -- break; -- GOTO_ERROR_ON(res != 0, "VEN next tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN next tpl data"); -- } -+ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, -+ ssb_pcmcia_do_get_invariants, sprom); -+ if ((res == 0) || (res == -ENOSPC)) -+ return 0; - -- return 0; --error: - ssb_printk(KERN_ERR PFX -- "PCMCIA: Failed to fetch device invariants: %s\n", -- error_description); -+ "PCMCIA: Failed to fetch device invariants\n"); - return -ENODEV; - } - ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -354,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - dev->bus = bus; - dev->ops = bus->ops; - -- ssb_dprintk(KERN_INFO PFX -+ printk(KERN_DEBUG PFX - "Core %d found: %s " - "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", - i, ssb_core_name(dev->id.coreid), ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -14,6 +14,7 @@ - #include "ssb_private.h" - - #include <linux/ctype.h> -+#include <linux/slab.h> - - - static const struct ssb_sprom *fallback_sprom; -@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - u16 *sprom; - int res = 0, err = -ENOMEM; - size_t sprom_size_words = bus->sprom_size; -+ struct ssb_freeze_context freeze; - - sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); - if (!sprom) -@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - err = -ERESTARTSYS; - if (mutex_lock_interruptible(&bus->sprom_mutex)) - goto out_kfree; -- err = ssb_devices_freeze(bus); -- if (err == -EOPNOTSUPP) { -- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " -- "No suspend support. Is CONFIG_PM enabled?\n"); -- goto out_unlock; -- } -+ err = ssb_devices_freeze(bus, &freeze); - if (err) { - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); - goto out_unlock; - } - res = sprom_write(bus, sprom); -- err = ssb_devices_thaw(bus); -+ err = ssb_devices_thaw(&freeze); - if (err) - ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); - out_unlock: -@@ -179,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback - { - return fallback_sprom; - } -+ -+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ -+bool ssb_is_sprom_available(struct ssb_bus *bus) -+{ -+ /* status register only exists on chipcomon rev >= 11 and we need check -+ for >= 31 only */ -+ /* this routine differs from specs as we do not access SPROM directly -+ on PCMCIA */ -+ if (bus->bustype == SSB_BUSTYPE_PCI && -+ bus->chipco.dev->id.revision >= 31) -+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; -+ -+ return true; -+} ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f - - /* core.c */ - extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); --extern int ssb_devices_freeze(struct ssb_bus *bus); --extern int ssb_devices_thaw(struct ssb_bus *bus); - extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); - int ssb_for_each_bus_call(unsigned long data, - int (*func)(struct ssb_bus *bus, unsigned long data)); - extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); - -+struct ssb_freeze_context { -+ /* Pointer to the bus */ -+ struct ssb_bus *bus; -+ /* Boolean list to indicate whether a device is frozen on this bus. */ -+ bool device_frozen[SSB_MAX_NR_CORES]; -+}; -+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx); -+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); -+ -+ - - /* b43_pci_bridge.c */ - #ifdef CONFIG_SSB_B43_PCI_BRIDGE - extern int __init b43_pci_ssb_bridge_init(void); - extern void __exit b43_pci_ssb_bridge_exit(void); --#else /* CONFIG_SSB_B43_PCI_BRIDGR */ -+#else /* CONFIG_SSB_B43_PCI_BRIDGE */ - static inline int b43_pci_ssb_bridge_init(void) - { - return 0; -@@ -196,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini - static inline void b43_pci_ssb_bridge_exit(void) - { - } --#endif /* CONFIG_SSB_PCIHOST */ -+#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ - - #endif /* LINUX_SSB_PRIVATE_H_ */ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -269,7 +269,8 @@ struct ssb_bus { - - const struct ssb_bus_ops *ops; - -- /* The core in the basic address register window. (PCI bus only) */ -+ /* The core currently mapped into the MMIO window. -+ * Not valid on all host-buses. So don't use outside of SSB. */ - struct ssb_device *mapped_device; - union { - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -@@ -281,14 +282,17 @@ struct ssb_bus { - * On PCMCIA-host busses this is used to protect the whole MMIO access. */ - spinlock_t bar_lock; - -- /* The bus this backplane is running on. */ -+ /* The host-bus this backplane is running on. */ - enum ssb_bustype bustype; -- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ -- struct pci_dev *host_pci; -- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ -- struct pcmcia_device *host_pcmcia; -- /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ -- struct sdio_func *host_sdio; -+ /* Pointers to the host-bus. Check bustype before using any of these pointers. */ -+ union { -+ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ -+ struct pci_dev *host_pci; -+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ -+ struct pcmcia_device *host_pcmcia; -+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ -+ struct sdio_func *host_sdio; -+ }; - - /* See enum ssb_quirks */ - unsigned int quirks; -@@ -301,6 +305,7 @@ struct ssb_bus { - /* ID information about the Chip. */ - u16 chip_id; - u16 chip_rev; -+ u16 sprom_offset; - u16 sprom_size; /* number of words in sprom */ - u8 chip_package; - -@@ -390,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru - - extern void ssb_bus_unregister(struct ssb_bus *bus); - -+/* Does the device have an SPROM? */ -+extern bool ssb_is_sprom_available(struct ssb_bus *bus); -+ - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ - extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -53,6 +53,7 @@ - #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ - #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ - #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ -+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ - #define SSB_CHIPCO_CORECTL 0x0008 - #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ - #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -@@ -385,6 +386,7 @@ - - - /** Chip specific Chip-Status register contents. */ -+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ - #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 - #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ - #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -@@ -398,6 +400,18 @@ - #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 - #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ - -+/** Macros to determine SPROM presence based on Chip-Status register. */ -+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL) -+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ -+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) -+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ -+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL)) -+ - - - /** Clockcontrol masks and values **/ -@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { - struct ssb_chipcommon { - struct ssb_device *dev; - u32 capabilities; -+ u32 status; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct ssb_chipcommon_pmu pmu; ---- a/include/linux/ssb/ssb_regs.h -+++ b/include/linux/ssb/ssb_regs.h -@@ -170,26 +170,27 @@ - #define SSB_SPROMSIZE_WORDS_R4 220 - #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) - #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) --#define SSB_SPROM_BASE 0x1000 --#define SSB_SPROM_REVISION 0x107E -+#define SSB_SPROM_BASE1 0x1000 -+#define SSB_SPROM_BASE31 0x0800 -+#define SSB_SPROM_REVISION 0x007E - #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ - #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ - #define SSB_SPROM_REVISION_CRC_SHIFT 8 - - /* SPROM Revision 1 */ --#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ --#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ --#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ --#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ --#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ --#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ --#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ -+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ -+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ -+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ -+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ -+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ -+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ -+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ - #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ - #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ - #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 - #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ - #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ --#define SSB_SPROM1_BINF 0x105C /* Board info */ -+#define SSB_SPROM1_BINF 0x005C /* Board info */ - #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ - #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ - #define SSB_SPROM1_BINF_CCODE_SHIFT 8 -@@ -197,63 +198,63 @@ - #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 - #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ - #define SSB_SPROM1_BINF_ANTA_SHIFT 14 --#define SSB_SPROM1_PA0B0 0x105E --#define SSB_SPROM1_PA0B1 0x1060 --#define SSB_SPROM1_PA0B2 0x1062 --#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ -+#define SSB_SPROM1_PA0B0 0x005E -+#define SSB_SPROM1_PA0B1 0x0060 -+#define SSB_SPROM1_PA0B2 0x0062 -+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ - #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ - #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ - #define SSB_SPROM1_GPIOA_P1_SHIFT 8 --#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ -+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ - #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM1_GPIOB_P3_SHIFT 8 --#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ -+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ - #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ - #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ - #define SSB_SPROM1_MAXPWR_A_SHIFT 8 --#define SSB_SPROM1_PA1B0 0x106A --#define SSB_SPROM1_PA1B1 0x106C --#define SSB_SPROM1_PA1B2 0x106E --#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ -+#define SSB_SPROM1_PA1B0 0x006A -+#define SSB_SPROM1_PA1B1 0x006C -+#define SSB_SPROM1_PA1B2 0x006E -+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ - #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ - #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ - #define SSB_SPROM1_ITSSI_A_SHIFT 8 --#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ --#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ -+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ - #define SSB_SPROM1_AGAIN_BG_SHIFT 0 - #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ - #define SSB_SPROM1_AGAIN_A_SHIFT 8 - - /* SPROM Revision 2 (inherits from rev 1) */ --#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ --#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ -+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ -+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ - #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ - #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ - #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 --#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ -+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ - #define SSB_SPROM2_OPO_VALUE 0x00FF - #define SSB_SPROM2_OPO_UNUSED 0xFF00 --#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ -+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ - - /* SPROM Revision 3 (inherits most data from rev 2) */ --#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ --#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ - #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ - #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 - #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ - #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 --#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ -+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ -+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ - #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ - #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ - #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,100 +265,100 @@ - #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ - - /* SPROM Revision 4 */ --#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ --#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ -+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ -+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ -+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ -+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ -+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ -+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ -+#define SSB_SPROM4_GPIOA_P1_SHIFT 8 -+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ -+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ -+#define SSB_SPROM4_GPIOB_P3_SHIFT 8 -+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ - #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ - #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ - #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 - #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ - #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ --#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ --#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ --#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 --#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 --#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ --#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ -+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 -+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 -+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ - #define SSB_SPROM4_AGAIN0_SHIFT 0 - #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ - #define SSB_SPROM4_AGAIN1_SHIFT 8 --#define SSB_SPROM4_AGAIN23 0x1060 -+#define SSB_SPROM4_AGAIN23 0x0060 - #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ - #define SSB_SPROM4_AGAIN2_SHIFT 0 - #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ - #define SSB_SPROM4_AGAIN3_SHIFT 8 --#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ --#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ -+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ - #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ - #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ - #define SSB_SPROM4_ITSSI_BG_SHIFT 8 --#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ -+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ - #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ - #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ - #define SSB_SPROM4_ITSSI_A_SHIFT 8 --#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ --#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ --#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ --#define SSB_SPROM4_GPIOA_P1_SHIFT 8 --#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ --#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ --#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ --#define SSB_SPROM4_GPIOB_P3_SHIFT 8 --#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ --#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ --#define SSB_SPROM4_PA0B2 0x1086 --#define SSB_SPROM4_PA1B0 0x108E --#define SSB_SPROM4_PA1B1 0x1090 --#define SSB_SPROM4_PA1B2 0x1092 -+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ -+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ -+#define SSB_SPROM4_PA0B2 0x0086 -+#define SSB_SPROM4_PA1B0 0x008E -+#define SSB_SPROM4_PA1B1 0x0090 -+#define SSB_SPROM4_PA1B2 0x0092 - - /* SPROM Revision 5 (inherits most data from rev 4) */ --#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ --#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ --#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ --#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ --#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ -+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ -+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ -+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ -+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ - #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ - #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ - #define SSB_SPROM5_GPIOA_P1_SHIFT 8 --#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ - #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM5_GPIOB_P3_SHIFT 8 - - /* SPROM Revision 8 */ --#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ --#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ --#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ --#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ --#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ --#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ --#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ --#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ --#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ --#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 --#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ --#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 --#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ -+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ -+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ -+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ -+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ -+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ -+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ -+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ -+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ -+#define SSB_SPROM8_GPIOA_P1_SHIFT 8 -+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ -+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ -+#define SSB_SPROM8_GPIOB_P3_SHIFT 8 -+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ -+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ -+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 -+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ -+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 -+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ - #define SSB_SPROM8_AGAIN0_SHIFT 0 - #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ - #define SSB_SPROM8_AGAIN1_SHIFT 8 --#define SSB_SPROM8_AGAIN23 0x10A0 -+#define SSB_SPROM8_AGAIN23 0x00A0 - #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ - #define SSB_SPROM8_AGAIN2_SHIFT 0 - #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ - #define SSB_SPROM8_AGAIN3_SHIFT 8 --#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ --#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ --#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ --#define SSB_SPROM8_GPIOA_P1_SHIFT 8 --#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ --#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ --#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ --#define SSB_SPROM8_GPIOB_P3_SHIFT 8 --#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ -+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ - #define SSB_SPROM8_RSSISMF2G 0x000F - #define SSB_SPROM8_RSSISMC2G 0x00F0 - #define SSB_SPROM8_RSSISMC2G_SHIFT 4 -@@ -365,7 +366,7 @@ - #define SSB_SPROM8_RSSISAV2G_SHIFT 8 - #define SSB_SPROM8_BXA2G 0x1800 - #define SSB_SPROM8_BXA2G_SHIFT 11 --#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ -+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ - #define SSB_SPROM8_RSSISMF5G 0x000F - #define SSB_SPROM8_RSSISMC5G 0x00F0 - #define SSB_SPROM8_RSSISMC5G_SHIFT 4 -@@ -373,47 +374,47 @@ - #define SSB_SPROM8_RSSISAV5G_SHIFT 8 - #define SSB_SPROM8_BXA5G 0x1800 - #define SSB_SPROM8_BXA5G_SHIFT 11 --#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ -+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ - #define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ - #define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ - #define SSB_SPROM8_TRI5G_SHIFT 8 --#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ -+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ - #define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ - #define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ - #define SSB_SPROM8_TRI5GH_SHIFT 8 --#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ -+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ - #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ - #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ - #define SSB_SPROM8_RXPO5G_SHIFT 8 --#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ -+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ - #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ - #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ - #define SSB_SPROM8_ITSSI_BG_SHIFT 8 --#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ --#define SSB_SPROM8_PA0B1 0x10C4 --#define SSB_SPROM8_PA0B2 0x10C6 --#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ -+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ -+#define SSB_SPROM8_PA0B1 0x00C4 -+#define SSB_SPROM8_PA0B2 0x00C6 -+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ - #define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ - #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ - #define SSB_SPROM8_ITSSI_A_SHIFT 8 --#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ -+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ - #define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ - #define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ - #define SSB_SPROM8_MAXP_AL_SHIFT 8 --#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ --#define SSB_SPROM8_PA1B1 0x10CE --#define SSB_SPROM8_PA1B2 0x10D0 --#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ --#define SSB_SPROM8_PA1LOB1 0x10D4 --#define SSB_SPROM8_PA1LOB2 0x10D6 --#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ --#define SSB_SPROM8_PA1HIB1 0x10DA --#define SSB_SPROM8_PA1HIB2 0x10DC --#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ --#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ --#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ --#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ --#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ -+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ -+#define SSB_SPROM8_PA1B1 0x00CE -+#define SSB_SPROM8_PA1B2 0x00D0 -+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ -+#define SSB_SPROM8_PA1LOB1 0x00D4 -+#define SSB_SPROM8_PA1LOB2 0x00D6 -+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ -+#define SSB_SPROM8_PA1HIB1 0x00DA -+#define SSB_SPROM8_PA1HIB2 0x00DC -+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ -+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ - - /* Values for SSB_SPROM1_BINF_CCODE */ - enum { |