delete old danube folder

SVN-Revision: 9845

1 files changed, 0 insertions, 197 deletions

diff --git a/target/linux/danube/files/drivers/char/danube_led.c b/target/linux/danube/files/drivers/char/danube_led.c
deleted file mode 100644
index 86a92d5999..0000000000
--- a/target/linux/danube/files/drivers/char/danube_led.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2006 infineon
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org> 
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-#include <linux/errno.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_gpio.h>
-#include <asm/danube/danube_pmu.h>
-
-#define DANUBE_LED_CLK_EDGE				DANUBE_LED_FALLING
-//#define DANUBE_LED_CLK_EDGE			DANUBE_LED_RISING
-
-#define DANUBE_LED_SPEED				DANUBE_LED_8HZ
-
-#define DANUBE_LED_GPIO_PORT	0
-
-static int danube_led_major;
-
-void
-danube_led_set (unsigned int led)
-{
-	led &= 0xffffff;
-	writel(readl(DANUBE_LED_CPU0) | led, DANUBE_LED_CPU0);
-}
-EXPORT_SYMBOL(danube_led_set);
-
-void
-danube_led_clear (unsigned int led)
-{
-	led = ~(led & 0xffffff);
-	writel(readl(DANUBE_LED_CPU0) & led, DANUBE_LED_CPU0);
-}
-EXPORT_SYMBOL(danube_led_clear);
-
-void
-danube_led_blink_set (unsigned int led)
-{
-	led &= 0xffffff;
-	writel(readl(DANUBE_LED_CON0) | led, DANUBE_LED_CON0);
-}
-EXPORT_SYMBOL(danube_led_blink_set);
-
-void
-danube_led_blink_clear (unsigned int led)
-{
-	led = ~(led & 0xffffff);
-	writel(readl(DANUBE_LED_CON0) & led, DANUBE_LED_CON0);
-}
-EXPORT_SYMBOL(danube_led_blink_clear);
-
-void
-danube_led_setup_gpio (void)
-{
-	int i = 0;
-
-	/* we need to setup pins SH,D,ST (4,5,6) */
-	for (i = 4; i < 7; i++)
-	{
-		danube_port_set_altsel0(DANUBE_LED_GPIO_PORT, i);
-		danube_port_clear_altsel1(DANUBE_LED_GPIO_PORT, i);
-		danube_port_set_dir_out(DANUBE_LED_GPIO_PORT, i);
-		danube_port_set_open_drain(DANUBE_LED_GPIO_PORT, i);
-	}
-}
-
-static int
-led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int ret = -EINVAL;
-
-	switch ( cmd )
-	{
-	}
-
-	return ret;
-}
-
-static int
-led_open (struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static int
-led_release (struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static struct file_operations danube_led_fops = {
-	.owner = THIS_MODULE,
-	.ioctl = led_ioctl,
-	.open = led_open,
-	.release = led_release
-};
-
-
-/*
-Map for LED on reference board
-	WLAN_READ     LED11   OUT1    15
-	WARNING       LED12   OUT2    14
-	FXS1_LINK     LED13   OUT3    13
-	FXS2_LINK     LED14   OUT4    12
-	FXO_ACT       LED15   OUT5    11
-	USB_LINK      LED16   OUT6    10
-	ADSL2_LINK    LED19   OUT7    9
-	BT_LINK       LED17   OUT8    8
-	SD_LINK       LED20   OUT9    7
-	ADSL2_TRAFFIC LED31   OUT16   0
-Map for hardware relay on reference board
-	USB Power On          OUT11   5
-	RELAY                 OUT12   4
-*/
-
-
-int __init
-danube_led_init (void)
-{
-	int ret = 0;
-
-	danube_led_setup_gpio();
-
-	writel(0, DANUBE_LED_AR);
-	writel(0, DANUBE_LED_CPU0);
-	writel(0, DANUBE_LED_CPU1);
-	writel(LED_CON0_SWU, DANUBE_LED_CON0);
-	writel(0, DANUBE_LED_CON1);
-
-	/* setup the clock edge that the shift register is triggered on */
-	writel(readl(DANUBE_LED_CON0) & ~DANUBE_LED_EDGE_MASK, DANUBE_LED_CON0);
-	writel(readl(DANUBE_LED_CON0) | DANUBE_LED_CLK_EDGE, DANUBE_LED_CON0);
-
-	/* per default leds 15-0 are set */
-	writel(DANUBE_LED_GROUP1 | DANUBE_LED_GROUP0, DANUBE_LED_CON1);
-
-	/* leds are update periodically by the FPID */
-	writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_UPD_MASK, DANUBE_LED_CON1);
-	writel(readl(DANUBE_LED_CON1) | DANUBE_LED_UPD_SRC_FPI, DANUBE_LED_CON1);
-
-	/* set led update speed */
-	writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_MASK, DANUBE_LED_CON1);
-	writel(readl(DANUBE_LED_CON1) | DANUBE_LED_SPEED, DANUBE_LED_CON1);
-
-	/* adsl 0 and 1 leds are updated by the arc */
-	writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0);
-
-	/* per default, the leds are turned on */
-	danube_pmu_enable(DANUBE_PMU_PWDCR_LED);
-
-	danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops);
-
-	if (!danube_led_major)
-	{
-		printk("danube_led: Error! Could not register device. %d\n", danube_led_major);
-		ret = -EINVAL;
-
-		goto out;
-	}
-
-	printk(KERN_INFO "danube_led : device registered on major %d\n", danube_led_major);
-
-out:
-	return ret;
-}
-
-void __exit
-danube_led_exit (void)
-{
-	unregister_chrdev(danube_led_major, "danube_led");
-}
-
-module_init(danube_led_init);
-module_exit(danube_led_exit);