brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461

1 files changed, 152 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.18/530-board_A4001N1.patch b/target/linux/brcm63xx/patches-3.18/530-board_A4001N1.patch
new file mode 100644
index 0000000000..9a05d98548
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/530-board_A4001N1.patch
@@ -0,0 +1,152 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -234,6 +234,133 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_A4001N1 = {
++	.name					= "963281T_TEF",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.use_fallback_sprom		= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "A4001N1:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "A4001N1:red:power",
++			.gpio			= 8,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:green:inet",
++			.gpio			= 11,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:red:inet",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:green:ppp",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:red:ppp",
++			.gpio			= 5,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:green:3g",
++			.gpio			= 6,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:red:3g",
++			.gpio			= 7,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:green:wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:red:wlan",
++			.gpio			= 10,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:green:eth",
++			.gpio			= 31,
++			.active_low		= 1,
++		},
++		{
++			.name			= "A4001N1:red:eth",
++			.gpio			= 20,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 24,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.fallback_sprom = {
++		.type 				= SPROM_BCM43225,
++		.pci_bus			= 1,
++		.pci_dev			= 0,
++	},
++};
++
+ static struct board_info __initdata board_dsl_274xb_f1 = {
+ 	.name				= "AW4339U",
+ 	.expected_cpu_id		= 0x6328,
+@@ -2677,6 +2804,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+ 	&board_963281TAN,
++	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+@@ -2742,6 +2870,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
++	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ 	{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ 	{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },