brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766

1 files changed, 0 insertions, 92 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0178-BCM270X_DT-Use-fixed-factor-clock-for-uart1.patch b/target/linux/brcm2708/patches-4.1/0178-BCM270X_DT-Use-fixed-factor-clock-for-uart1.patch
deleted file mode 100644
index f8247591ed..0000000000
--- a/target/linux/brcm2708/patches-4.1/0178-BCM270X_DT-Use-fixed-factor-clock-for-uart1.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 72ab78d0e2048e9563179e530b315f0074b923c4 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 11 Sep 2015 09:14:01 +0100
-Subject: [PATCH 178/222] BCM270X_DT: Use fixed-factor-clock for uart1
-
-The BCM2835 mini-UART is almost 8250-compatible, but there is
-a factor-of-two difference in the clock divider for the baud rate.
-The standard 8250 driver can be used unmodified provided we lie to it
-about the clock frequency, pretending it is double the actual value.
-The mini-UART block shares the core clock, and the current firmware
-uses a DT-parameter to update the clock-frequency property. Although it
-works, this isn't ideal because it exposes the firmware to a driver
-problem.
-
-This patch uses the fixed-factor-clock module to create a clock that is
-always twice the frequency of the core clock. (N.B. These "fixed" clocks
-just describe an existing clock, rather than changing any hardware
-settings.)
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts |  1 -
- arch/arm/boot/dts/bcm2708-rpi-b.dts      |  1 -
- arch/arm/boot/dts/bcm2708-rpi-cm.dts     |  1 -
- arch/arm/boot/dts/bcm2708_common.dtsi    | 10 +++++++++-
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts    |  1 -
- 5 files changed, 9 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -103,7 +103,6 @@
- 	__overrides__ {
- 		uart0 = <&uart0>,"status";
- 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
--		uart1_clkrate = <&uart1>,"clock-frequency:0";
- 		i2s = <&i2s>,"status";
- 		spi = <&spi0>,"status";
- 		i2c0 = <&i2c0>,"status";
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -97,7 +97,6 @@
- 	__overrides__ {
- 		uart0 = <&uart0>,"status";
- 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
--		uart1_clkrate = <&uart1>,"clock-frequency:0";
- 		i2s = <&i2s>,"status";
- 		spi = <&spi0>,"status";
- 		i2c0 = <&i2c0>,"status";
---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-@@ -79,7 +79,6 @@
- 	__overrides__ {
- 		uart0 = <&uart0>,"status";
- 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
--		uart1_clkrate = <&uart1>,"clock-frequency:0";
- 		i2s = <&i2s>,"status";
- 		spi = <&spi0>,"status";
- 		i2c0 = <&i2c0>,"status";
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -165,7 +165,7 @@
- 			compatible = "brcm,bcm2835-aux-uart", "ns16550";
- 			reg = <0x7e215040 0x40>;
- 			interrupts = <1 29>;
--			clock-frequency = <500000000>;
-+			clocks = <&clk_uart1>;
- 			reg-shift = <2>;
- 			no-loopback-test;
- 			status = "disabled";
-@@ -294,6 +294,14 @@
- 			 clock-output-names = "pwm";
- 			 clock-frequency = <100000000>;
- 		};
-+
-+		clk_uart1: clock@6 {
-+			compatible = "fixed-factor-clock";
-+			clocks = <&clk_core>;
-+			#clock-cells = <0>;
-+			clock-div = <1>;
-+			clock-mult = <2>;
-+		};
- 	};
- 
- 	__overrides__ {
---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -103,7 +103,6 @@
- 	__overrides__ {
- 		uart0 = <&uart0>,"status";
- 		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
--		uart1_clkrate = <&uart1>,"clock-frequency:0";
- 		i2s = <&i2s>,"status";
- 		spi = <&spi0>,"status";
- 		i2c0 = <&i2c0>,"status";