diff options
author | Felix Fietkau <nbd@openwrt.org> | 2015-09-11 16:32:00 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2015-09-11 16:32:00 +0000 |
commit | 0b5d87fd30d3d8edd27cbcc9b7688b1f9d740b2e (patch) | |
tree | 633627a1e4d5761b609c7ff1682b69ee85b06d9f /target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch | |
parent | 2ce833060a6ac412d0df362edb950b19da9af04c (diff) | |
download | master-31e0f0ae-0b5d87fd30d3d8edd27cbcc9b7688b1f9d740b2e.tar.gz master-31e0f0ae-0b5d87fd30d3d8edd27cbcc9b7688b1f9d740b2e.tar.bz2 master-31e0f0ae-0b5d87fd30d3d8edd27cbcc9b7688b1f9d740b2e.zip |
brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46853
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch | 422 |
1 files changed, 422 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch b/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch new file mode 100644 index 0000000000..3521f08258 --- /dev/null +++ b/target/linux/brcm2708/patches-4.1/0156-spi-bcm2835-enable-dma-modes-for-transfers-meeting-c.patch @@ -0,0 +1,422 @@ +From abff2f91fd0f8163b065b92786be93562c7e67af Mon Sep 17 00:00:00 2001 +From: Martin Sperl <kernel@martin.sperl.org> +Date: Sun, 10 May 2015 20:47:28 +0000 +Subject: [PATCH 156/171] spi: bcm2835: enable dma modes for transfers meeting + certain conditions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Conditions per spi_transfer are: +* transfer.len >= 96 bytes (to avoid mapping overhead costs) +* transfer.len < 65536 bytes (limitaion by spi-hw block - could get extended) +* an individual scatter/gather transfer length must be a multiple of 4 + for anything but the last transfer - spi-hw block limit. + (some shortcut has been taken in can_dma to avoid unnecessary mapping of + pages which, for which there is a chance that there is a split with a + transfer length not a multiple of 4) + +If it becomes a necessity these restrictions can get removed by additional +code. + +Note that this patch requires a patch to dma-bcm2835.c by Noralf to +enable scatter-gather mode inside the dmaengine, which has not been +merged yet. + +That is why no patch to arch/arm/boot/dts/bcm2835.dtsi is included - the +code works as before without dma when tx/rx are not set, but it writes +a message warning about dma not used: +spi-bcm2835 20204000.spi: no tx-dma configuration found - not using dma mode + +To enable dma-mode add the following lines to the device-tree: + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; + +Tested-by: Noralf Trønnes <noralf@tronnes.org> (private communication) +Signed-off-by: Martin Sperl <kernel@martin.sperl.org> +Signed-off-by: Mark Brown <broonie@kernel.org> +(cherry picked from commit 3ecd37edaa2a6ba3246e2c35714be9316b1087fe) +--- + drivers/spi/spi-bcm2835.c | 303 +++++++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 301 insertions(+), 2 deletions(-) + +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -23,15 +23,18 @@ + #include <linux/clk.h> + #include <linux/completion.h> + #include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <linux/dmaengine.h> + #include <linux/err.h> + #include <linux/interrupt.h> + #include <linux/io.h> + #include <linux/kernel.h> + #include <linux/module.h> + #include <linux/of.h> +-#include <linux/of_irq.h> +-#include <linux/of_gpio.h> ++#include <linux/of_address.h> + #include <linux/of_device.h> ++#include <linux/of_gpio.h> ++#include <linux/of_irq.h> + #include <linux/spi/spi.h> + + /* SPI register offsets */ +@@ -70,6 +73,7 @@ + + #define BCM2835_SPI_POLLING_LIMIT_US 30 + #define BCM2835_SPI_POLLING_JIFFIES 2 ++#define BCM2835_SPI_DMA_MIN_LENGTH 96 + #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ + | SPI_NO_CS | SPI_3WIRE) + +@@ -83,6 +87,7 @@ struct bcm2835_spi { + u8 *rx_buf; + int tx_len; + int rx_len; ++ bool dma_pending; + }; + + static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg) +@@ -128,12 +133,15 @@ static void bcm2835_spi_reset_hw(struct + /* Disable SPI interrupts and transfer */ + cs &= ~(BCM2835_SPI_CS_INTR | + BCM2835_SPI_CS_INTD | ++ BCM2835_SPI_CS_DMAEN | + BCM2835_SPI_CS_TA); + /* and reset RX/TX FIFOS */ + cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX; + + /* and reset the SPI_HW */ + bcm2835_wr(bs, BCM2835_SPI_CS, cs); ++ /* as well as DLEN */ ++ bcm2835_wr(bs, BCM2835_SPI_DLEN, 0); + } + + static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) +@@ -193,6 +201,279 @@ static int bcm2835_spi_transfer_one_irq( + return 1; + } + ++/* ++ * DMA support ++ * ++ * this implementation has currently a few issues in so far as it does ++ * not work arrount limitations of the HW. ++ * ++ * the main one being that DMA transfers are limited to 16 bit ++ * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN ++ * ++ * also we currently assume that the scatter-gather fragments are ++ * all multiple of 4 (except the last) - otherwise we would need ++ * to reset the FIFO before subsequent transfers... ++ * this also means that tx/rx transfers sg's need to be of equal size! ++ * ++ * there may be a few more border-cases we may need to address as well ++ * but unfortunately this would mean splitting up the scatter-gather ++ * list making it slightly unpractical... ++ */ ++static void bcm2835_spi_dma_done(void *data) ++{ ++ struct spi_master *master = data; ++ struct bcm2835_spi *bs = spi_master_get_devdata(master); ++ ++ /* reset fifo and HW */ ++ bcm2835_spi_reset_hw(master); ++ ++ /* and terminate tx-dma as we do not have an irq for it ++ * because when the rx dma will terminate and this callback ++ * is called the tx-dma must have finished - can't get to this ++ * situation otherwise... ++ */ ++ dmaengine_terminate_all(master->dma_tx); ++ ++ /* mark as no longer pending */ ++ bs->dma_pending = 0; ++ ++ /* and mark as completed */; ++ complete(&master->xfer_completion); ++} ++ ++static int bcm2835_spi_prepare_sg(struct spi_master *master, ++ struct spi_transfer *tfr, ++ bool is_tx) ++{ ++ struct dma_chan *chan; ++ struct scatterlist *sgl; ++ unsigned int nents; ++ enum dma_transfer_direction dir; ++ unsigned long flags; ++ ++ struct dma_async_tx_descriptor *desc; ++ dma_cookie_t cookie; ++ ++ if (is_tx) { ++ dir = DMA_MEM_TO_DEV; ++ chan = master->dma_tx; ++ nents = tfr->tx_sg.nents; ++ sgl = tfr->tx_sg.sgl; ++ flags = 0 /* no tx interrupt */; ++ ++ } else { ++ dir = DMA_DEV_TO_MEM; ++ chan = master->dma_rx; ++ nents = tfr->rx_sg.nents; ++ sgl = tfr->rx_sg.sgl; ++ flags = DMA_PREP_INTERRUPT; ++ } ++ /* prepare the channel */ ++ desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags); ++ if (!desc) ++ return -EINVAL; ++ ++ /* set callback for rx */ ++ if (!is_tx) { ++ desc->callback = bcm2835_spi_dma_done; ++ desc->callback_param = master; ++ } ++ ++ /* submit it to DMA-engine */ ++ cookie = dmaengine_submit(desc); ++ ++ return dma_submit_error(cookie); ++} ++ ++static inline int bcm2835_check_sg_length(struct sg_table *sgt) ++{ ++ int i; ++ struct scatterlist *sgl; ++ ++ /* check that the sg entries are word-sized (except for last) */ ++ for_each_sg(sgt->sgl, sgl, (int)sgt->nents - 1, i) { ++ if (sg_dma_len(sgl) % 4) ++ return -EFAULT; ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_spi_transfer_one_dma(struct spi_master *master, ++ struct spi_device *spi, ++ struct spi_transfer *tfr, ++ u32 cs) ++{ ++ struct bcm2835_spi *bs = spi_master_get_devdata(master); ++ int ret; ++ ++ /* check that the scatter gather segments are all a multiple of 4 */ ++ if (bcm2835_check_sg_length(&tfr->tx_sg) || ++ bcm2835_check_sg_length(&tfr->rx_sg)) { ++ dev_warn_once(&spi->dev, ++ "scatter gather segment length is not a multiple of 4 - falling back to interrupt mode\n"); ++ return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs); ++ } ++ ++ /* setup tx-DMA */ ++ ret = bcm2835_spi_prepare_sg(master, tfr, true); ++ if (ret) ++ return ret; ++ ++ /* start TX early */ ++ dma_async_issue_pending(master->dma_tx); ++ ++ /* mark as dma pending */ ++ bs->dma_pending = 1; ++ ++ /* set the DMA length */ ++ bcm2835_wr(bs, BCM2835_SPI_DLEN, tfr->len); ++ ++ /* start the HW */ ++ bcm2835_wr(bs, BCM2835_SPI_CS, ++ cs | BCM2835_SPI_CS_TA | BCM2835_SPI_CS_DMAEN); ++ ++ /* setup rx-DMA late - to run transfers while ++ * mapping of the rx buffers still takes place ++ * this saves 10us or more. ++ */ ++ ret = bcm2835_spi_prepare_sg(master, tfr, false); ++ if (ret) { ++ /* need to reset on errors */ ++ dmaengine_terminate_all(master->dma_tx); ++ bcm2835_spi_reset_hw(master); ++ return ret; ++ } ++ ++ /* start rx dma late */ ++ dma_async_issue_pending(master->dma_rx); ++ ++ /* wait for wakeup in framework */ ++ return 1; ++} ++ ++static bool bcm2835_spi_can_dma(struct spi_master *master, ++ struct spi_device *spi, ++ struct spi_transfer *tfr) ++{ ++ /* only run for gpio_cs */ ++ if (!gpio_is_valid(spi->cs_gpio)) ++ return false; ++ ++ /* we start DMA efforts only on bigger transfers */ ++ if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH) ++ return false; ++ ++ /* BCM2835_SPI_DLEN has defined a max transfer size as ++ * 16 bit, so max is 65535 ++ * we can revisit this by using an alternative transfer ++ * method - ideally this would get done without any more ++ * interaction... ++ */ ++ if (tfr->len > 65535) { ++ dev_warn_once(&spi->dev, ++ "transfer size of %d too big for dma-transfer\n", ++ tfr->len); ++ return false; ++ } ++ ++ /* if we run rx/tx_buf with word aligned addresses then we are OK */ ++ if (((u32)tfr->tx_buf % 4 == 0) && ((u32)tfr->tx_buf % 4 == 0)) ++ return true; ++ ++ /* otherwise we only allow transfers within the same page ++ * to avoid wasting time on dma_mapping when it is not practical ++ */ ++ if (((u32)tfr->tx_buf % SZ_4K) + tfr->len > SZ_4K) { ++ dev_warn_once(&spi->dev, ++ "Unaligned spi tx-transfer bridging page\n"); ++ return false; ++ } ++ if (((u32)tfr->rx_buf % SZ_4K) + tfr->len > SZ_4K) { ++ dev_warn_once(&spi->dev, ++ "Unaligned spi tx-transfer bridging page\n"); ++ return false; ++ } ++ ++ /* return OK */ ++ return true; ++} ++ ++void bcm2835_dma_release(struct spi_master *master) ++{ ++ if (master->dma_tx) { ++ dmaengine_terminate_all(master->dma_tx); ++ dma_release_channel(master->dma_tx); ++ master->dma_tx = NULL; ++ } ++ if (master->dma_rx) { ++ dmaengine_terminate_all(master->dma_rx); ++ dma_release_channel(master->dma_rx); ++ master->dma_rx = NULL; ++ } ++} ++ ++void bcm2835_dma_init(struct spi_master *master, struct device *dev) ++{ ++ struct dma_slave_config slave_config; ++ const __be32 *addr; ++ dma_addr_t dma_reg_base; ++ int ret; ++ ++ /* base address in dma-space */ ++ addr = of_get_address(master->dev.of_node, 0, NULL, NULL); ++ if (!addr) { ++ dev_err(dev, "could not get DMA-register address - not using dma mode\n"); ++ goto err; ++ } ++ dma_reg_base = be32_to_cpup(addr); ++ ++ /* get tx/rx dma */ ++ master->dma_tx = dma_request_slave_channel(dev, "tx"); ++ if (!master->dma_tx) { ++ dev_err(dev, "no tx-dma configuration found - not using dma mode\n"); ++ goto err; ++ } ++ master->dma_rx = dma_request_slave_channel(dev, "rx"); ++ if (!master->dma_rx) { ++ dev_err(dev, "no rx-dma configuration found - not using dma mode\n"); ++ goto err_release; ++ } ++ ++ /* configure DMAs */ ++ slave_config.direction = DMA_MEM_TO_DEV; ++ slave_config.dst_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO); ++ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ ++ ret = dmaengine_slave_config(master->dma_tx, &slave_config); ++ if (ret) ++ goto err_config; ++ ++ slave_config.direction = DMA_DEV_TO_MEM; ++ slave_config.src_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO); ++ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ ++ ret = dmaengine_slave_config(master->dma_rx, &slave_config); ++ if (ret) ++ goto err_config; ++ ++ /* all went well, so set can_dma */ ++ master->can_dma = bcm2835_spi_can_dma; ++ master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */ ++ /* need to do TX AND RX DMA, so we need dummy buffers */ ++ master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; ++ ++ return; ++ ++err_config: ++ dev_err(dev, "issue configuring dma: %d - not using DMA mode\n", ++ ret); ++err_release: ++ bcm2835_dma_release(master); ++err: ++ return; ++} ++ + static int bcm2835_spi_transfer_one_poll(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr, +@@ -301,12 +582,26 @@ static int bcm2835_spi_transfer_one(stru + return bcm2835_spi_transfer_one_poll(master, spi, tfr, + cs, xfer_time_us); + ++ /* run in dma mode if conditions are right */ ++ if (master->can_dma && bcm2835_spi_can_dma(master, spi, tfr)) ++ return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs); ++ ++ /* run in interrupt-mode */ + return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs); + } + + static void bcm2835_spi_handle_err(struct spi_master *master, + struct spi_message *msg) + { ++ struct bcm2835_spi *bs = spi_master_get_devdata(master); ++ ++ /* if an error occurred and we have an active dma, then terminate */ ++ if (bs->dma_pending) { ++ dmaengine_terminate_all(master->dma_tx); ++ dmaengine_terminate_all(master->dma_rx); ++ bs->dma_pending = 0; ++ } ++ /* and reset */ + bcm2835_spi_reset_hw(master); + } + +@@ -505,6 +800,8 @@ static int bcm2835_spi_probe(struct plat + goto out_clk_disable; + } + ++ bcm2835_dma_init(master, &pdev->dev); ++ + /* initialise the hardware with the default polarities */ + bcm2835_wr(bs, BCM2835_SPI_CS, + BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); +@@ -535,6 +832,8 @@ static int bcm2835_spi_remove(struct pla + + clk_disable_unprepare(bs->clk); + ++ bcm2835_dma_release(master); ++ + return 0; + } + |