diff options
author | Rafał Miłecki <zajec5@gmail.com> | 2015-05-16 17:14:25 +0000 |
---|---|---|
committer | Rafał Miłecki <zajec5@gmail.com> | 2015-05-16 17:14:25 +0000 |
commit | 75b8e247e359322bf613395e7f1add6e16a5fc5f (patch) | |
tree | 5ae0915f38252181ca4ff6c93cff23db2fd0b06b /target/linux/bcm53xx/base-files/etc/board.d/02_network | |
parent | ab836105639034d70f6bb3433e9a3dae55bd7d74 (diff) | |
download | master-31e0f0ae-75b8e247e359322bf613395e7f1add6e16a5fc5f.tar.gz master-31e0f0ae-75b8e247e359322bf613395e7f1add6e16a5fc5f.tar.bz2 master-31e0f0ae-75b8e247e359322bf613395e7f1add6e16a5fc5f.zip |
bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45692
Diffstat (limited to 'target/linux/bcm53xx/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/bcm53xx/base-files/etc/board.d/02_network | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 4263615e83..ad004d792c 100755 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -9,6 +9,9 @@ board_config_update board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1) case "$board" in +asus,rt-ac87u) + ifname=eth1 + ;; netgear,r8000) ifname=eth2 ;; @@ -32,6 +35,10 @@ if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \ echo "$vlan2ports" | egrep -q "^0 5"; then ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" ucidef_add_switch_vlan "switch0" "2" "0 5t" +elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \ + echo "$vlan2ports" | egrep -q "^0 7"; then + ucidef_add_switch_vlan "switch0" "1" "1 2 3 5 7t" + ucidef_add_switch_vlan "switch0" "2" "0 7t" elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \ echo "$vlan2ports" | egrep -q "^4 8"; then ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5 7 8t" |