ar71xx: mach-ubnt-xm.c convert patches to mach file

Signed-off-by: Arne Zachlod <arne@nerdkeller.org>

3 files changed, 1 insertions, 773 deletions

diff --git a/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch
index 50be509e6c..4699c82746 100644
--- a/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch
+++ b/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch
@@ -12,92 +12,3 @@
  	help
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -16,10 +16,11 @@
- 
- #include <asm/mach-ath79/irq.h>
- 
--#include "machtypes.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "machtypes.h"
- #include "pci.h"
- 
- #define UBNT_XM_GPIO_LED_L1		0
-@@ -32,7 +33,7 @@
- #define UBNT_XM_KEYS_POLL_INTERVAL	20
- #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
- 
--#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
-+#define UBNT_XM_EEPROM_ADDR		0x1fff1000
- 
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- 	{
-@@ -65,48 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
- 	}
- };
- 
--static struct spi_board_info ubnt_xm_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--	}
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
--	.bus_num		= 0,
--	.num_chipselect		= 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
--	switch (PCI_SLOT(dev->devfn)) {
--	case 0:
--		dev->dev.platform_data = &ubnt_xm_eeprom_data;
--		break;
--	}
--
--	return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
--	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
--	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
--	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
--	ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
- static void __init ubnt_xm_init(void)
- {
-+	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+
- 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- 				 ubnt_xm_leds_gpio);
- 
-@@ -114,10 +77,8 @@ static void __init ubnt_xm_init(void)
- 					ARRAY_SIZE(ubnt_xm_gpio_keys),
- 					ubnt_xm_gpio_keys);
- 
--	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
--			   ARRAY_SIZE(ubnt_xm_spi_info));
--
--	ubnt_xm_pci_init();
-+	ath79_register_m25p80(NULL);
-+	ap91_pci_init(eeprom, NULL);
- }
- 
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
diff --git a/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
index b463d14156..2bfd58d4e8 100644
--- a/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
+++ b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -1,629 +1,8 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -12,16 +12,26 @@
- 
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ar8216_platform.h>
- 
-+#include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
- 
-+#include <linux/platform_data/phy-at803x.h>
-+
-+#include "common.h"
- #include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-m25p80.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
- #include "machtypes.h"
--#include "pci.h"
- 
- #define UBNT_XM_GPIO_LED_L1		0
- #define UBNT_XM_GPIO_LED_L2		1
-@@ -37,19 +47,19 @@
- 
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- 	{
--		.name		= "ubnt-xm:red:link1",
-+		.name		= "ubnt:red:link1",
- 		.gpio		= UBNT_XM_GPIO_LED_L1,
- 		.active_low	= 0,
- 	}, {
--		.name		= "ubnt-xm:orange:link2",
-+		.name		= "ubnt:orange:link2",
- 		.gpio		= UBNT_XM_GPIO_LED_L2,
- 		.active_low	= 0,
- 	}, {
--		.name		= "ubnt-xm:green:link3",
-+		.name		= "ubnt:green:link3",
- 		.gpio		= UBNT_XM_GPIO_LED_L3,
- 		.active_low	= 0,
- 	}, {
--		.name		= "ubnt-xm:green:link4",
-+		.name		= "ubnt:green:link4",
- 		.gpio		= UBNT_XM_GPIO_LED_L4,
- 		.active_low	= 0,
- 	},
-@@ -66,9 +76,13 @@ static struct gpio_keys_button ubnt_xm_g
- 	}
- };
- 
-+#define UBNT_M_WAN_PHYMASK	BIT(4)
-+
- static void __init ubnt_xm_init(void)
- {
- 	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
- 
- 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- 				 ubnt_xm_leds_gpio);
-@@ -79,9 +93,552 @@ static void __init ubnt_xm_init(void)
- 
- 	ath79_register_m25p80(NULL);
- 	ap91_pci_init(eeprom, NULL);
-+
-+	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+	ath79_register_eth(0);
- }
- 
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- 	     "UBNT-XM",
- 	     "Ubiquiti Networks XM (rev 1.0) board",
- 	     ubnt_xm_init);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
-+	     ubnt_xm_init);
-+
-+static void __init ubnt_rocket_m_setup(void)
-+{
-+	ubnt_xm_init();
-+	ath79_register_usb();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
-+	     ubnt_rocket_m_setup);
-+
-+static void __init ubnt_nano_m_setup(void)
-+{
-+	ubnt_xm_init();
-+	ath79_register_eth(1);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
-+	     ubnt_nano_m_setup);
-+
-+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:green:globe",
-+		.gpio		= 0,
-+		.active_low	= 1,
-+	}, {
-+	        .name		= "ubnt:green:power",
-+		.gpio		= 11,
-+		.active_low	= 1,
-+		.default_state  = LEDS_GPIO_DEFSTATE_ON,
-+	}
-+};
-+
-+static void __init ubnt_airrouter_setup(void)
-+{
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_m25p80(NULL);
-+	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+	ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
-+
-+	ath79_register_eth(1);
-+	ath79_register_eth(0);
-+	ath79_register_usb();
-+
-+	ap91_pci_init(ee, NULL);
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
-+				 ubnt_airrouter_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
-+	     ubnt_airrouter_setup);
-+
-+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:orange:dome",
-+		.gpio		= 1,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:green:dome",
-+		.gpio		= 0,
-+		.active_low	= 0,
-+	}
-+};
-+
-+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:orange:front",
-+		.gpio		= 1,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:green:front",
-+		.gpio		= 0,
-+		.active_low	= 0,
-+	}
-+};
-+
-+static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:white:front",
-+		.gpio		= 1,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:blue:front",
-+		.gpio		= 0,
-+		.active_low	= 0,
-+	}
-+};
-+
-+
-+static void __init ubnt_unifi_setup(void)
-+{
-+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-+	ath79_register_eth(0);
-+
-+	ap91_pci_init(ee, NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
-+				 ubnt_unifi_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
-+	     ubnt_unifi_setup);
-+
-+
-+#define UBNT_UNIFIOD_PRI_PHYMASK	BIT(4)
-+#define UBNT_UNIFIOD_2ND_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-+
-+static void __init ubnt_unifi_outdoor_setup(void)
-+{
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
-+				 UBNT_UNIFIOD_2ND_PHYMASK));
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+	ath79_register_eth(0);
-+	ath79_register_eth(1);
-+
-+	ap91_pci_init(ee, NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
-+				 ubnt_unifi_outdoor_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
-+	     "Ubiquiti UniFiAP Outdoor",
-+	     ubnt_unifi_outdoor_setup);
-+
-+
-+static void __init ubnt_unifi_outdoor_plus_setup(void)
-+{
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
-+				 UBNT_UNIFIOD_2ND_PHYMASK));
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+	ath79_register_eth(0);
-+	ath79_register_eth(1);
-+
-+	ap91_pci_init(ee, NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
-+				 ubnt_unifi_outdoor_plus_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
-+	     "Ubiquiti UniFiAP Outdoor+",
-+	     ubnt_unifi_outdoor_plus_setup);
-+
-+
-+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
-+	{
-+		.name		= "ubnt:white:dome",
-+		.gpio		= 12,
-+	}, {
-+		.name		= "ubnt:blue:dome",
-+		.gpio		= 13,
-+	}
-+};
-+
-+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
-+	{
-+		.desc			= "reset",
-+		.type			= EV_KEY,
-+		.code			= KEY_RESTART,
-+		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio			= 17,
-+		.active_low		= 1,
-+	}
-+};
-+
-+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
-+	.mode = AR8327_PAD_MAC_RGMII,
-+	.txclk_delay_en = true,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-+};
-+
-+static struct ar8327_platform_data uap_pro_ar8327_data = {
-+	.pad0_cfg = &uap_pro_ar8327_pad0_cfg,
-+	.port0_cfg = {
-+		.force_link = 1,
-+		.speed = AR8327_PORT_SPEED_1000,
-+		.duplex = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+	},
-+};
-+
-+static struct mdio_board_info uap_pro_mdio0_info[] = {
-+	{
-+		.bus_id = "ag71xx-mdio.0",
-+		.phy_addr = 0,
-+		.platform_data = &uap_pro_ar8327_data,
-+	},
-+};
-+
-+#define UAP_PRO_MAC0_OFFSET		0x0000
-+#define UAP_PRO_MAC1_OFFSET		0x0006
-+#define UAP_PRO_WMAC_CALDATA_OFFSET	0x1000
-+#define UAP_PRO_PCI_CALDATA_OFFSET	0x5000
-+
-+static void __init ubnt_uap_pro_setup(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
-+				 ubnt_uap_pro_gpio_leds);
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(uap_pro_gpio_keys),
-+                                        uap_pro_gpio_keys);
-+
-+	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+	ath79_register_mdio(0, 0x0);
-+	mdiobus_register_board_info(uap_pro_mdio0_info,
-+				    ARRAY_SIZE(uap_pro_mdio0_info));
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+	/* GMAC0 is connected to an AR8327 switch */
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.phy_mask = BIT(0);
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+	ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+	ath79_register_eth(0);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
-+	     ubnt_uap_pro_setup);
-+
-+#define UBNT_XW_GPIO_LED_L1		11
-+#define UBNT_XW_GPIO_LED_L2		16
-+#define UBNT_XW_GPIO_LED_L3		13
-+#define UBNT_XW_GPIO_LED_L4		14
-+
-+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:red:link1",
-+		.gpio		= UBNT_XW_GPIO_LED_L1,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:orange:link2",
-+		.gpio		= UBNT_XW_GPIO_LED_L2,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link3",
-+		.gpio		= UBNT_XW_GPIO_LED_L3,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link4",
-+		.gpio		= UBNT_XW_GPIO_LED_L4,
-+		.active_low	= 1,
-+	},
-+};
-+
-+#define UBNT_ROCKET_TI_GPIO_LED_L1	16
-+#define UBNT_ROCKET_TI_GPIO_LED_L2	17
-+#define UBNT_ROCKET_TI_GPIO_LED_L3	18
-+#define UBNT_ROCKET_TI_GPIO_LED_L4	19
-+#define UBNT_ROCKET_TI_GPIO_LED_L5	20
-+#define UBNT_ROCKET_TI_GPIO_LED_L6	21
-+static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:green:link1",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L1,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link2",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L2,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link3",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L3,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link4",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L4,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:green:link5",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L5,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:green:link6",
-+		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L6,
-+		.active_low	= 0,
-+	},
-+};
-+
-+static void __init ubnt_xw_init(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
-+				 ubnt_xw_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+
-+	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
-+	ath79_init_mac(ath79_eth0_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+}
-+
-+static void __init ubnt_nano_m_xw_setup(void)
-+{
-+	ubnt_xw_init();
-+
-+	/* GMAC0 is connected to an AR8326 switch */
-+	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
-+	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_register_eth(0);
-+}
-+
-+static void __init ubnt_loco_m_xw_setup(void)
-+{
-+	ubnt_xw_init();
-+
-+	ath79_register_mdio(0, ~BIT(1));
-+	ath79_eth0_data.phy_mask = BIT(1);
-+	ath79_register_eth(0);
-+}
-+
-+static void __init ubnt_rocket_m_xw_setup(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
-+				 ubnt_xw_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+
-+	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+	ath79_register_mdio(0, ~BIT(4));
-+	ath79_eth0_data.phy_mask = BIT(4);
-+	ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+	ath79_register_eth(0);
-+}
-+
-+static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
-+	.disable_smarteee = 1,
-+	.enable_rgmii_rx_delay = 1,
-+	.enable_rgmii_tx_delay = 1,
-+};
-+static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
-+        {
-+                .bus_id = "ag71xx-mdio.0",
-+                .phy_addr = 4,
-+                .platform_data = &ubnt_rocket_m_ti_at803_data,
-+        },
-+};
-+
-+static void __init ubnt_rocket_m_ti_setup(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
-+				 ubnt_rocket_ti_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+
-+	ap91_pci_init(eeprom + 0x1000, NULL);
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-+	ath79_setup_ar934x_eth_rx_delay(3, 3);
-+	ath79_init_mac(ath79_eth0_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+	ath79_init_mac(ath79_eth1_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC1_OFFSET, 0);
-+
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
-+
-+	mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
-+			ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
-+	ath79_register_mdio(0, 0x0);
-+
-+
-+	ath79_eth0_data.phy_mask = BIT(4);
-+	/* read out from vendor */
-+	ath79_eth0_pll_data.pll_1000 = 0x2000000;
-+	ath79_eth0_pll_data.pll_10 = 0x1313;
-+	ath79_register_eth(0);
-+
-+	ath79_register_mdio(1, 0x0);
-+	ath79_eth1_data.phy_mask = BIT(3);
-+	ath79_register_eth(1);
-+}
-+
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
-+	     ubnt_nano_m_xw_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
-+	     ubnt_loco_m_xw_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
-+	     ubnt_rocket_m_xw_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
-+	     ubnt_rocket_m_ti_setup);
-+
-+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
-+	{
-+		.name	   = "ubnt:blue:wlan",
-+		.gpio	   = 0,
-+	}, {
-+		.name	   = "ubnt:white:status",
-+		.gpio	   = 1,
-+	},
-+};
-+
-+static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
-+	{
-+		.desc		= "reset",
-+		.type		= EV_KEY,
-+		.code		= KEY_RESTART,
-+		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio		= 12,
-+		.active_low	= 1,
-+	}
-+};
-+
-+static void __init ubnt_airgateway_setup(void)
-+{
-+	u32 t;
-+	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+
-+	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-+				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-+				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-+				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-+				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-+
-+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
-+	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-+
-+	ath79_register_m25p80(NULL);
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
-+				 ubnt_airgateway_gpio_leds);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(airgateway_gpio_keys),
-+					airgateway_gpio_keys);
-+
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+
-+	ath79_register_mdio(0, 0x0);
-+
-+	ath79_register_eth(1);
-+	ath79_register_eth(0);
-+
-+	ath79_register_wmac(ee, NULL);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
-+	     ubnt_airgateway_setup);
-+
 --- a/arch/mips/ath79/Kconfig
 +++ b/arch/mips/ath79/Kconfig
 @@ -68,12 +68,16 @@ config ATH79_MACH_PB44
  	  Atheros PB44 reference board.
- 
+
  config ATH79_MACH_UBNT_XM
 -	bool "Ubiquiti Networks XM (rev 1.0) board"
 +	bool "Ubiquiti Networks XM/UniFi boards"
diff --git a/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch b/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch
deleted file mode 100644
index 27cc1e50a7..0000000000
--- a/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -642,3 +642,59 @@ static void __init ubnt_airgateway_setup
- MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
- 	     ubnt_airgateway_setup);
- 
-+static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = {
-+	{
-+		.name	   = "ubnt:blue:wlan",
-+		.gpio	   = 13,
-+	}, {
-+		.name	   = "ubnt:white:status",
-+		.gpio	   = 17,
-+	},
-+};
-+
-+
-+static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = {
-+	{
-+		.desc		= "reset",
-+		.type		= EV_KEY,
-+		.code		= KEY_RESTART,
-+		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio		= 12,
-+		.active_low	= 1,
-+	}
-+};
-+
-+static void __init ubnt_airgateway_pro_setup(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds),
-+				 ubnt_airgateway_pro_gpio_leds);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(airgateway_pro_gpio_keys),
-+					airgateway_pro_gpio_keys);
-+
-+	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+	ath79_register_mdio(1, 0x0);
-+
-+	/* GMAC0 is left unused in this configuration */
-+
-+	/* GMAC1 is connected to MAC0 on the internal switch */
-+	/* The PoE/WAN port connects to port 5 on the internal switch */
-+	/* The LAN port connects to port 4 on the internal switch */
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_register_eth(1);
-+
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro",
-+	     ubnt_airgateway_pro_setup);