apm821xx: add support for the Western Digital MyBook Live Series

Hardware Highlights:

This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC  UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
     32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM:  256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.

This target produces two images for a target.
 1. ext4 image
    The extracted/raw image can be directly installed on
    the internal HDD via "dd if=img.ext4 of=/dev/sdX".

    This can either be done in place with the stock MyBook Live
    firmware via ssh. Or by removing the HDD and writing the image
    with a different PC.

    The the compressed images are useful for sysupgrade.

 2. recovery.tar image for TFTP and Serial.

    extract the recovery.tar to a TFTP server directory.

    On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
    # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self

    Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

3 files changed, 541 insertions, 0 deletions

diff --git a/target/linux/apm821xx/dts/apollo3g-duo.dts b/target/linux/apm821xx/dts/apollo3g-duo.dts
new file mode 100644
index 0000000000..874c469b2b
--- /dev/null
+++ b/target/linux/apm821xx/dts/apollo3g-duo.dts
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apollo3g.dtsi"
+
+/ {
+	model = "MyBook Live Duo";
+};
diff --git a/target/linux/apm821xx/dts/apollo3g.dts b/target/linux/apm821xx/dts/apollo3g.dts
new file mode 100644
index 0000000000..1b9f8267e4
--- /dev/null
+++ b/target/linux/apm821xx/dts/apollo3g.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "apollo3g.dtsi"
+
+/ {
+	model = "MyBook Live";
+};
+
+&SATA0 {
+	status = "disabled";
+};
+
+&USBOTG0 {
+	status = "disabled";
+};
+
+&gpio0 {
+	enable-usb {
+		status = "disabled";
+	};
+
+	enable-port0 {
+		status = "disabled";
+	};
+};
diff --git a/target/linux/apm821xx/dts/apollo3g.dtsi b/target/linux/apm821xx/dts/apollo3g.dtsi
new file mode 100644
index 0000000000..bd15a8e22a
--- /dev/null
+++ b/target/linux/apm821xx/dts/apollo3g.dtsi
@@ -0,0 +1,489 @@
+/*
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "amcc,apollo3g";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm82181";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	OCM1: ocm@400040000 {
+		compatible = "ibm,ocm";
+		status = "okay";
+		cell-index = <1>;
+		/* configured in U-Boot */
+		reg = <4 0x00040000 0x8000>; /* 32K */
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008
+			   0x030 0x008>;
+		cache-line-size = <32>;
+		cache-size = <262144>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		PKA: pka@114000 {
+			device_type = "pka";
+			compatible = "ppc4xx-pka", "amcc,ppc4xx-pka";
+			reg = <0 0x00114000 0x4000>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x14 0x2>;
+		};
+
+		HWRNG: trng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			descriptor-memory = "ocm";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/	0x6 0x4
+					/*RXEOB*/	0x7 0x4
+					/*SERR*/	0x3 0x4
+					/*TXDE*/	0x4 0x4
+					/*RXDE*/	0x5 0x4
+					/*TX0 COAL*/	0x8 0x2
+					/*TX1 COAL 0x9 0x2*/
+					/*RX0 COAL*/	0xc 0x2
+					/*RX1 COAL 0xd 0x2*/ >;
+		};
+
+		AHBDMA: dma@bffd0800 {
+			compatible = "snps,dma-spear1340";
+			reg = <4 0xbffd0800 0x400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <25 4>;
+			#dma-cells = <3>;
+			/* use autoconfiguration for the dma setup */
+		};
+
+		SATA0: sata@bffd1000 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1000 0x800>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <26 4>;
+			dmas = <&AHBDMA 0 0 1>;
+			dma-names = "sata-dma";
+		};
+
+		SATA1: sata@bffd1800 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1800 0x800>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <27 4>;
+			dmas = <&AHBDMA 1 0 2>;
+			dma-names = "sata-dma";
+		};
+
+
+		USBOTG0: usbotg@bff80000 {
+			compatible = "snps,dwc2";
+			reg = <4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			interrupts = <0 1 2>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </* USB-OTG */ 0 &UIC2 0x1c 4
+					 /* HIGH-POWER */ 1 &UIC1 0x1a 8
+					 /* DMA */ 2 &UIC0 0xc 4>;
+			dr_mode = "host";
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x4 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+				/* ranges property are supplied by U-Boot */
+				ranges = <0x0 0x0 0xfff80000 0x00080000
+					  0x1 0x0 0x00000000 0x00000000
+					  0x2 0x0 0x00000000 0x00000000>;
+
+				/* Define device tree for Apollo3g NAS NOR flash
+				 * The NOR doesn't work when "enable-button" GPIO
+				 * is asserted.
+				 */
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
+					bank-width = <1>;
+					reg = <0x00000000 0x00000000 0x00080000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						/* Part of bootrom - Don't use it without a jump */
+						label = "free";
+						reg = <0x00000000 0x0001e000>;
+					};
+					partition@1 {
+						label = "env";
+						reg = <0x0001e000 0x00002000>;
+					};
+					partition@2 {
+						label = "uboot";
+						reg = <0x00020000 0x00050000>;
+					};
+
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					status = "disabled";
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+					};
+				};
+			};
+
+			gpio0: gpio0@e0000000 {
+				compatible = "wd,mbl-gpio", "ti,74273";
+				reg-names = "dat";
+				reg = <0xe0000000 0x1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				enable-phy {
+					/* toggle to reset EMAC PHY */
+					gpio-hog;
+					line-name = "enable EMAC PHY";
+					gpios = <0 1>;
+					output-low;
+				};
+
+				enable-button {
+					/* Defined in u-boot as: NOT_NOR
+					 * "enables features other than NOR
+					 * specifically, the buffer at CS2"
+					 * (button).
+					 *
+					 * Note: This option is disabled as
+					 * it prevents the system from being
+					 * rebooted successfully.
+					 */
+
+					gpio-hog;
+					line-name = "Enable Reset Button, disable NOR";
+					gpios = <1 0>;
+					output-low;
+				};
+
+				enable-usb {
+					gpio-hog;
+					line-name = "Power USB Core";
+					gpios = <2 1>;
+					output-low;
+				};
+
+				enable-port1 {
+					gpio-hog;
+					line-name = "Power Drive Port 1";
+					gpios = <3 1>;
+					output-low;
+				};
+
+				enable-port0 {
+					gpio-hog;
+					line-name = "Power Drive Port 0";
+					gpios = <7 1>;
+					output-low;
+				};
+			};
+
+			gpio1: gpio1@e0100000 {
+				compatible = "wd,mbl-gpio", "ti,74244";
+				reg-names = "dat";
+				reg = <0xe0100000 0x1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				no-output;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			gpio-leds {
+				compatible = "gpio-leds";
+				power-red {
+					label = "mbl:red:power";
+					gpios = <&gpio0 4 0>;
+					linux,default-trigger = "panic";
+				};
+				power-green {
+					label = "mbl:green:power";
+					gpios = <&gpio0 5 0>;
+					linux,default-trigger = "default-on";
+				};
+				power-blue {
+					label = "mbl:blue:power";
+					gpios = <&gpio0 6 0>;
+					linux,default-trigger = "cpu0";
+				};
+			};
+
+			gpio_keys_polled {
+				compatible = "gpio-keys-polled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				poll-interval = <60>;	/* 3 * 20 = 60ms */
+				autorepeat;
+				button@1 {
+					label = "Reset button";
+					linux,code = <0x198>; /* KEY_RESTART */
+					gpios = <&gpio1 2 1>;
+				};
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600c00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <16384>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		ADMA: adma {
+			compatible = "amcc,apm82181-adma";
+			device_type = "dma";
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			dma-4channel@1 {
+				compatible = "amcc,apm82181-dma-4channel";
+				cell-index = <1>;
+				label = "plb_dma1";
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xd 0x4>;
+				pool_size = <0x4000>;
+				dcr-reg = <0x208 0x20f>;
+			};
+
+			dma-4channel@2 {
+				compatible = "amcc,apm82181-dma-4channel";
+				cell-index = <2>;
+				label = "plb_dma2";
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xe 0x4>;
+				pool_size = <0x4000>;
+				dcr-reg = <0x210 0x217>;
+			};
+
+			dma-4channel@3 {
+				compatible = "amcc,apm82181-dma-4channel";
+				cell-index = <3>;
+				label = "plb_dma3";
+				interrupt-parent = <&UIC0>;
+				interrupts = <0xf 0x4>;
+				pool_size = <0x4000>;
+				dcr-reg = <0x218 0x21f>;
+			};
+		};
+
+		DMA: plb_dma@400300200 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "amcc,dma";
+			cell-index = <0>;
+			reg = <4 00300200 200>;
+			dcr-reg = <0x100 0x13f>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0>;
+			interrupt-map = < /* chan0 */ 0 &UIC0 12 4>;
+
+			dma-4channel@0{
+				compatible = "amcc,dma-4channel";
+				cell-index = <0>;
+				label = "channel0";
+				reg = <0x100 0x107>;
+			};
+		};
+	};
+};