strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

1 files changed, 0 insertions, 179 deletions

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c
deleted file mode 100644
index 1bde6b02d5..0000000000
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  $Id$
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_mpmc.h>
-
-#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
-#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
-
-#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))
-#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v)
-
-#if 1
-#  define mem_dbg(f, a...)	printk("mem_detect: " f, ## a)
-#else
-#  define mem_dbg(f, a...)
-#endif
-
-#define MEM_WR_DELAY	10000 /* 0.01 usec */
-
-unsigned long adm5120_memsize;
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
-	volatile u32 *p1 = (volatile u32 *)addr;
-	volatile u32 *p2 = (volatile u32 *)(addr+offs);
-	u32 t,u,v;
-
-	/* save original value */
-	t = *p1;
-	u = *p2;
-
-	if (t != u)
-		return 0;
-
-	v = 0x55555555;
-	if (u == v)
-		v = 0xAAAAAAAA;
-
-	mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
-	*p1 = v;
-	mem_dbg("delay %d ns\n", MEM_WR_DELAY);
-	adm5120_ndelay(MEM_WR_DELAY);
-	u = *p2;
-
-	mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
-	/* restore original value */
-	*p1 = t;
-
-	return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
-	u32	memctrl;
-	u32	size, maxsize;
-	u8	*p;
-
-	memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL);
-	switch (memctrl & MEMCTRL_SDRS_MASK) {
-	case MEMCTRL_SDRS_4M:
-		maxsize = 4 << 20;
-		break;
-	case MEMCTRL_SDRS_8M:
-		maxsize = 8 << 20;
-		break;
-	case MEMCTRL_SDRS_16M:
-		maxsize = 16 << 20;
-		break;
-	default:
-		maxsize = 64 << 20;
-		break;
-	}
-
-	/* disable buffers for both SDRAM banks */
-	mem_dbg("disable buffers for both banks\n");
-	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE);
-	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE);
-
-	mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
-	/* detect size of the 1st SDRAM bank */
-	p = (u8 *)KSEG1ADDR(0);
-	for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-		if (mem_check_pattern(p, size)) {
-			/* mirrored address */
-			mem_dbg("mirrored data found at offset 0x%08X\n", size);
-			break;
-		}
-	}
-
-	mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
-	adm5120_memsize = size;
-
-	if (size != maxsize)
-		/* 2nd bank is not supported */
-		goto out;
-
-	if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
-		/* 2nd bank is disabled */
-		goto out;
-
-	/*
-	 * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
-	 * are missing.
-	 */
-	mem_dbg("check presence of 2nd bank\n");
-
-	p = (u8 *)KSEG1ADDR(maxsize+size-4);
-	if (mem_check_pattern(p, 0)) {
-		adm5120_memsize += size;
-	}
-
-	if (maxsize != size) {
-		/* adjusting MECTRL register */
-		memctrl &= ~(MEMCTRL_SDRS_MASK);
-		switch (size>>20) {
-		case 4:
-			memctrl |= MEMCTRL_SDRS_4M;
-			break;
-		case 8:
-			memctrl |= MEMCTRL_SDRS_8M;
-			break;
-		case 16:
-			memctrl |= MEMCTRL_SDRS_16M;
-			break;
-		default:
-			memctrl |= MEMCTRL_SDRS_64M;
-			break;
-		}
-		SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl);
-	}
-
-out:
-	/* reenable buffer for both SDRAM banks */
-	mem_dbg("enable buffers for both banks\n");
-	MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE);
-	MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE);
-
-	mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
-		size >>20);
-}
-
-void __init adm5120_mem_init(void)
-{
-	adm5120_detect_memsize();
-	add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}