add the new compat-wireless for 2.6.27 + multi-rate retry and minstrel patches, rename patches/ for old compat-wireless to patches-old/

SVN-Revision: 12865

1 files changed, 201 insertions, 0 deletions

diff --git a/package/mac80211/patches/000-kconfig.patch b/package/mac80211/patches/000-kconfig.patch
new file mode 100644
index 0000000000..bcbf8868b5
--- /dev/null
+++ b/package/mac80211/patches/000-kconfig.patch
@@ -0,0 +1,201 @@
+--- /dev/null
++++ b/net/mac80211/Kconfig
+@@ -0,0 +1,198 @@
++config MAC80211
++	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
++	select CRYPTO
++	select CRYPTO_ECB
++	select CRYPTO_ARC4
++	select CRYPTO_AES
++	select CRC32
++	select WIRELESS_EXT
++	select CFG80211
++	---help---
++	  This option enables the hardware independent IEEE 802.11
++	  networking stack.
++
++menu "Rate control algorithm selection"
++	depends on MAC80211 != n
++
++config MAC80211_RC_PID
++	bool "PID controller based rate control algorithm" if EMBEDDED
++	default y
++	---help---
++	  This option enables a TX rate control algorithm for
++	  mac80211 that uses a PID controller to select the TX
++	  rate.
++
++choice
++	prompt "Default rate control algorithm"
++	default MAC80211_RC_DEFAULT_PID
++	---help---
++	  This option selects the default rate control algorithm
++	  mac80211 will use. Note that this default can still be
++	  overriden through the ieee80211_default_rc_algo module
++	  parameter if different algorithms are available.
++
++config MAC80211_RC_DEFAULT_PID
++	bool "PID controller based rate control algorithm"
++	depends on MAC80211_RC_PID
++	---help---
++	  Select the PID controller based rate control as the
++	  default rate control algorithm. You should choose
++	  this unless you know what you are doing.
++
++endchoice
++
++config MAC80211_RC_DEFAULT
++	string
++	default "pid" if MAC80211_RC_DEFAULT_PID
++	default ""
++
++endmenu
++
++config MAC80211_MESH
++	bool "Enable mac80211 mesh networking (pre-802.11s) support"
++	depends on MAC80211 && EXPERIMENTAL
++	---help---
++	 This options enables support of Draft 802.11s mesh networking.
++	 The implementation is based on Draft 1.08 of the Mesh Networking
++	 amendment. For more information visit http://o11s.org/.
++
++
++config MAC80211_LEDS
++	bool "Enable LED triggers"
++	depends on MAC80211
++	select NEW_LEDS
++	select LEDS_TRIGGERS
++	---help---
++	  This option enables a few LED triggers for different
++	  packet receive/transmit events.
++
++config MAC80211_DEBUGFS
++	bool "Export mac80211 internals in DebugFS"
++	depends on MAC80211 && DEBUG_FS
++	---help---
++	  Select this to see extensive information about
++	  the internal state of mac80211 in debugfs.
++
++	  Say N unless you know you need this.
++
++menuconfig MAC80211_DEBUG_MENU
++	bool "Select mac80211 debugging features"
++	depends on MAC80211
++	---help---
++	  This option collects various mac80211 debug settings.
++
++config MAC80211_DEBUG_PACKET_ALIGNMENT
++	bool "Enable packet alignment debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  This option is recommended for driver authors and strongly
++	  discouraged for everybody else, it will trigger a warning
++	  when a driver hands mac80211 a buffer that is aligned in
++	  a way that will cause problems with the IP stack on some
++	  architectures.
++
++	  Say N unless you're writing a mac80211 based driver.
++
++config MAC80211_NOINLINE
++	bool "Do not inline TX/RX handlers"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  This option affects code generation in mac80211, when
++	  selected some functions are marked "noinline" to allow
++	  easier debugging of problems in the transmit and receive
++	  paths.
++
++	  This option increases code size a bit and inserts a lot
++	  of function calls in the code, but is otherwise safe to
++	  enable.
++
++	  If unsure, say N unless you expect to be finding problems
++	  in mac80211.
++
++config MAC80211_VERBOSE_DEBUG
++	bool "Verbose debugging output"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  Selecting this option causes mac80211 to print out
++	  many debugging messages. It should not be selected
++	  on production systems as some of the messages are
++	  remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_HT_DEBUG
++	bool "Verbose HT debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  This option enables 802.11n High Throughput features
++	  debug tracing output.
++
++	  It should not be selected on production systems as some
++	  of the messages are remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_TKIP_DEBUG
++	bool "Verbose TKIP debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  Selecting this option causes mac80211 to print out
++	  very verbose TKIP debugging messages. It should not
++	  be selected on production systems as those messages
++	  are remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_IBSS_DEBUG
++	bool "Verbose IBSS debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  Selecting this option causes mac80211 to print out
++	  very verbose IBSS debugging messages. It should not
++	  be selected on production systems as those messages
++	  are remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_VERBOSE_PS_DEBUG
++	bool "Verbose powersave mode debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  Selecting this option causes mac80211 to print out very
++	  verbose power save mode debugging messages (when mac80211
++	  is an AP and has power saving stations.)
++	  It should not be selected on production systems as those
++	  messages are remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_VERBOSE_MPL_DEBUG
++	bool "Verbose mesh peer link debugging"
++	depends on MAC80211_DEBUG_MENU
++	depends on MAC80211_MESH
++	---help---
++	  Selecting this option causes mac80211 to print out very
++	  verbose mesh peer link debugging messages (when mac80211
++	  is taking part in a mesh network).
++	  It should not be selected on production systems as those
++	  messages are remotely triggerable.
++
++	  Do not select this option.
++
++config MAC80211_DEBUG_COUNTERS
++	bool "Extra statistics for TX/RX debugging"
++	depends on MAC80211_DEBUG_MENU
++	depends on MAC80211_DEBUGFS
++	---help---
++	  Selecting this option causes mac80211 to keep additional
++	  and very verbose statistics about TX and RX handler use
++	  and show them in debugfs.
++
++	  If unsure, say N.
++
++config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
++	bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
++	depends on MAC80211_DEBUG_MENU
++	---help---
++	  Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
++	  debug messages.