mac80211: use upstream patches for rtl8xxxu

Also improves rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 158 deletions

diff --git a/package/kernel/mac80211/patches/652-0049-rtl8xxxu-Use-a-struct-rtl8xxxu_fileops-in-rtl8xxxu_i.patch b/package/kernel/mac80211/patches/652-0049-rtl8xxxu-Use-a-struct-rtl8xxxu_fileops-in-rtl8xxxu_i.patch
deleted file mode 100644
index 5e46c29adb..0000000000
--- a/package/kernel/mac80211/patches/652-0049-rtl8xxxu-Use-a-struct-rtl8xxxu_fileops-in-rtl8xxxu_i.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From e3c6694ed9367142704930754f3d6bff6c25f7e7 Mon Sep 17 00:00:00 2001
-From: Jes Sorensen <Jes.Sorensen@redhat.com>
-Date: Wed, 24 Aug 2016 14:06:04 -0400
-Subject: [PATCH] rtl8xxxu: Use a struct rtl8xxxu_fileops * in
- rtl8xxxu_init_device()
-
-This saves some 217, or about, derefences of priv->fops.
-
-Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
----
- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  | 39 +++++++++++-----------
- 1 file changed, 20 insertions(+), 19 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
-+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
-@@ -3896,6 +3896,7 @@ static int rtl8xxxu_init_device(struct i
- {
- 	struct rtl8xxxu_priv *priv = hw->priv;
- 	struct device *dev = &priv->udev->dev;
-+	struct rtl8xxxu_fileops *fops = priv->fops;
- 	bool macpower;
- 	int ret;
- 	u8 val8;
-@@ -3914,7 +3915,7 @@ static int rtl8xxxu_init_device(struct i
- 	else
- 		macpower = true;
- 
--	ret = priv->fops->power_on(priv);
-+	ret = fops->power_on(priv);
- 	if (ret < 0) {
- 		dev_warn(dev, "%s: Failed power on\n", __func__);
- 		goto exit;
-@@ -3931,7 +3932,7 @@ static int rtl8xxxu_init_device(struct i
- 	/*
- 	 * Set RX page boundary
- 	 */
--	rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary);
-+	rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
- 
- 	ret = rtl8xxxu_download_firmware(priv);
- 	dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
-@@ -3942,8 +3943,8 @@ static int rtl8xxxu_init_device(struct i
- 	if (ret)
- 		goto exit;
- 
--	if (priv->fops->phy_init_antenna_selection)
--		priv->fops->phy_init_antenna_selection(priv);
-+	if (fops->phy_init_antenna_selection)
-+		fops->phy_init_antenna_selection(priv);
- 
- 	ret = rtl8xxxu_init_mac(priv);
- 
-@@ -3956,7 +3957,7 @@ static int rtl8xxxu_init_device(struct i
- 	if (ret)
- 		goto exit;
- 
--	ret = priv->fops->init_phy_rf(priv);
-+	ret = fops->init_phy_rf(priv);
- 	if (ret)
- 		goto exit;
- 
-@@ -3982,7 +3983,7 @@ static int rtl8xxxu_init_device(struct i
- 		/*
- 		 * Set TX buffer boundary
- 		 */
--		val8 = priv->fops->total_page_num + 1;
-+		val8 = fops->total_page_num + 1;
- 
- 		rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
- 		rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
-@@ -3995,14 +3996,14 @@ static int rtl8xxxu_init_device(struct i
- 	 * The vendor drivers set PBP for all devices, except 8192e.
- 	 * There is no explanation for this in any of the sources.
- 	 */
--	val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
--		(priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
-+	val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
-+		(fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
- 	if (priv->rtl_chip != RTL8192E)
- 		rtl8xxxu_write8(priv, REG_PBP, val8);
- 
- 	dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
- 	if (!macpower) {
--		ret = priv->fops->llt_init(priv);
-+		ret = fops->llt_init(priv);
- 		if (ret) {
- 			dev_warn(dev, "%s: LLT table init failed\n", __func__);
- 			goto exit;
-@@ -4011,12 +4012,12 @@ static int rtl8xxxu_init_device(struct i
- 		/*
- 		 * Chip specific quirks
- 		 */
--		priv->fops->usb_quirks(priv);
-+		fops->usb_quirks(priv);
- 
- 		/*
- 		 * Enable TX report and TX report timer for 8723bu/8188eu/...
- 		 */
--		if (priv->fops->has_tx_report) {
-+		if (fops->has_tx_report) {
- 			val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
- 			val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
- 			rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
-@@ -4108,7 +4109,7 @@ static int rtl8xxxu_init_device(struct i
- 	 * Set data auto rate fallback retry count.
- 	 * Notably the 8188eu doesn't seem to use this
- 	 */
--	if (priv->fops->has_darfrc) {
-+	if (fops->has_darfrc) {
- 		rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
- 		rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
- 		rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
-@@ -4165,8 +4166,8 @@ static int rtl8xxxu_init_device(struct i
- 		rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
- 	}
- 
--	if (priv->fops->init_aggregation)
--		priv->fops->init_aggregation(priv);
-+	if (fops->init_aggregation)
-+		fops->init_aggregation(priv);
- 
- 	/*
- 	 * Enable CCK and OFDM block
-@@ -4183,7 +4184,7 @@ static int rtl8xxxu_init_device(struct i
- 	/*
- 	 * Start out with default power levels for channel 6, 20MHz
- 	 */
--	priv->fops->set_tx_power(priv, 1, false);
-+	fops->set_tx_power(priv, 1, false);
- 
- 	/* Let the 8051 take control of antenna setting */
- 	if (priv->rtl_chip != RTL8192E) {
-@@ -4199,8 +4200,8 @@ static int rtl8xxxu_init_device(struct i
- 
- 	rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
- 
--	if (priv->fops->init_statistics)
--		priv->fops->init_statistics(priv);
-+	if (fops->init_statistics)
-+		fops->init_statistics(priv);
- 
- 	if (priv->rtl_chip == RTL8192E) {
- 		/*
-@@ -4225,12 +4226,12 @@ static int rtl8xxxu_init_device(struct i
- 
- 	rtl8723a_phy_lc_calibrate(priv);
- 
--	priv->fops->phy_iq_calibrate(priv);
-+	fops->phy_iq_calibrate(priv);
- 
- 	/*
- 	 * This should enable thermal meter
- 	 */
--	if (priv->fops->gen2_thermal_meter)
-+	if (fops->gen2_thermal_meter)
- 		rtl8xxxu_write_rfreg(priv,
- 				     RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
- 	else