add Huawei D105

http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173

9 files changed, 101 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 0c2ae83c75..dbde1f7775 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -21,6 +21,9 @@ get_status_led() {
 	br6425)
 		status_led="edimax:green:power"
 		;;
+	d105)
+		status_led="d105:red:power"
+		;;
 	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1)
 		status_led="d-link:green:status"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index de5a542f38..6dd36d7403 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -64,6 +64,7 @@ case "$FIRMWARE" in
 	broadway | \
 	br6524n | \
 	carambola | \
+	d105 | \
 	dir-615-h1 | \
 	dir-620-a1 | \
 	esr-9753 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 65497266ee..bb8a5dcbd0 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -48,6 +48,10 @@ case $board in
 	br6524n)
 		set_wifi_led "edimax:blue:wlan"
 		;;
+	d105)
+		ucidef_set_led_default "power" "POWER" "d105:red:power" "1"
+		set_usb_led "d105:green:usb"
+		;;
 	dir-300-b1|\
 	dir-600-b1|\
 	dir-600-b2|\
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 7d30f72f08..d2400870c6 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -125,6 +125,7 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
 		;;
 
+	d105 | \
 	omni-emb-hpm|\
 	wli-tx4-ag300n)
 		ucidef_set_interface_lan "eth0"
@@ -249,6 +250,7 @@ ramips_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
 
+	d105 | \
 	wli-tx4-ag300n)
 		lan_mac=$(mtd_get_mac_binary factory 4)
 		;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index e860309ec4..985d1bc8f7 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -20,6 +20,7 @@ preinit_set_mac_address() {
 		;;
 	bc2 |\
 	broadway |\
+	d105 |\
 	dir-620-a1 |\
 	esr-9753 |\
 	freestation5 |\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 2a713f8c65..4948e5b5cc 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -105,6 +105,9 @@ ramips_board_detect() {
 	*"Hauppauge Broadway")
 		name="broadway"
 		;;
+	*"Huawei D105")
+		name="d105"
+		;;
 	*"La Fonera 2.0N")
 		name="fonera20n"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index a6f52cd143..e2a55feabb 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -24,6 +24,7 @@ platform_check_image() {
 	bc2 | \
 	broadway | \
 	carambola | \
+	d105 | \
 	dir-300-b1 | \
 	dir-600-b1 | \
 	dir-600-b2 | \
diff --git a/target/linux/ramips/dts/D105.dts b/target/linux/ramips/dts/D105.dts
new file mode 100644
index 0000000000..c6f420eda9
--- /dev/null
+++ b/target/linux/ramips/dts/D105.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "D105", "ralink,rt3050-soc";
+	model = "Huawei D105";
+
+	memorydetect {
+		ralink,memory = <0x0 0x200000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+			ralink,gpiomux = "jtag";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "d105:red:power";
+			gpios = <&gpio0 0 1>;
+		};
+		wps {
+			label = "d105:green:usb";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	esw@10110000 {
+		status = "okay";
+		ralink,portmap = <0x2f>;
+	};
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 01425b41d3..99ceb63f89 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -268,6 +268,8 @@ Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),b
 
 Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA)
 
+Image/Build/Profile/D105=$(call BuildFirmware/Default4M/$(1),$(1),d105,D105)
+
 define BuildFirmware/DIR300B1/squashfs
 	$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
 	-mkwrgimg -s $(4) -d /dev/mtdblock/2 \
@@ -409,6 +411,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/BC2,$(1))
 	$(call Image/Build/Profile/BROADWAY,$(1))
 	$(call Image/Build/Profile/CARAMBOLA,$(1))
+	$(call Image/Build/Profile/D105,$(1))
 	$(call Image/Build/Profile/DIR-300-B1,$(1))
 	$(call Image/Build/Profile/DIR-600-B1,$(1))
 	$(call Image/Build/Profile/DIR-600-B2,$(1))