From 00f0f13e12d3a110cc7807215c49fe3cfdf77565 Mon Sep 17 00:00:00 2001
From: root <root@lamia.panaceas.james.local>
Date: Mon, 7 Sep 2015 11:53:40 +0100
Subject: fish

---
 bootloader/bsp/pca10028.h | 113 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 bootloader/bsp/pca10028.h

(limited to 'bootloader/bsp/pca10028.h')

diff --git a/bootloader/bsp/pca10028.h b/bootloader/bsp/pca10028.h
new file mode 100644
index 0000000..bb2fa52
--- /dev/null
+++ b/bootloader/bsp/pca10028.h
@@ -0,0 +1,113 @@
+/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+#ifndef PCA10028_H
+#define PCA10028_H
+
+// LEDs definitions for PCA10028
+#define LEDS_NUMBER    4
+
+#define LED_START      21
+#define LED_1          21
+#define LED_2          22
+#define LED_3          23
+#define LED_4          24
+#define LED_STOP       24
+
+#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
+
+#define BSP_LED_0      LED_1
+#define BSP_LED_1      LED_2
+#define BSP_LED_2      LED_3
+#define BSP_LED_3      LED_4
+
+#define BSP_LED_0_MASK (1<<BSP_LED_0)
+#define BSP_LED_1_MASK (1<<BSP_LED_1)
+#define BSP_LED_2_MASK (1<<BSP_LED_2)
+#define BSP_LED_3_MASK (1<<BSP_LED_3)
+
+#define LEDS_MASK      (BSP_LED_0_MASK | BSP_LED_1_MASK | BSP_LED_2_MASK | BSP_LED_3_MASK)
+/* all LEDs are lit when GPIO is low */
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BUTTONS_NUMBER 4
+
+#define BUTTON_START   17
+#define BUTTON_1       17
+#define BUTTON_2       18
+#define BUTTON_3       19
+#define BUTTON_4       20
+#define BUTTON_STOP    20
+#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
+
+#define BSP_BUTTON_0   BUTTON_1
+#define BSP_BUTTON_1   BUTTON_2
+#define BSP_BUTTON_2   BUTTON_3
+#define BSP_BUTTON_3   BUTTON_4
+
+#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
+#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)
+#define BSP_BUTTON_2_MASK (1<<BSP_BUTTON_2)
+#define BSP_BUTTON_3_MASK (1<<BSP_BUTTON_3)
+
+#define BUTTONS_MASK   0x001E0000
+
+#define RX_PIN_NUMBER  11
+#define TX_PIN_NUMBER  9
+#define CTS_PIN_NUMBER 10
+#define RTS_PIN_NUMBER 8
+#define HWFC           true
+
+#define SPIS_MISO_PIN  28    // SPI MISO signal. 
+#define SPIS_CSN_PIN   12    // SPI CSN signal. 
+#define SPIS_MOSI_PIN  25    // SPI MOSI signal. 
+#define SPIS_SCK_PIN   29    // SPI SCK signal. 
+
+#define SPIM0_SCK_PIN       4     /**< SPI clock GPIO pin number. */
+#define SPIM0_MOSI_PIN      1     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM0_MISO_PIN      3     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM0_SS_PIN        2     /**< SPI Slave Select GPIO pin number. */
+
+#define SPIM1_SCK_PIN       15     /**< SPI clock GPIO pin number. */
+#define SPIM1_MOSI_PIN      12     /**< SPI Master Out Slave In GPIO pin number. */
+#define SPIM1_MISO_PIN      14     /**< SPI Master In Slave Out GPIO pin number. */
+#define SPIM1_SS_PIN        13     /**< SPI Slave Select GPIO pin number. */
+
+// serialization APPLICATION board
+#define SER_APP_RX_PIN              12    // UART RX pin number.
+#define SER_APP_TX_PIN              13    // UART TX pin number.
+#define SER_APP_CTS_PIN             15    // UART Clear To Send pin number.
+#define SER_APP_RTS_PIN             14    // UART Request To Send pin number.
+
+#define SER_APP_SPIM0_SCK_PIN       29     // SPI clock GPIO pin number.
+#define SER_APP_SPIM0_MOSI_PIN      25     // SPI Master Out Slave In GPIO pin number
+#define SER_APP_SPIM0_MISO_PIN      28     // SPI Master In Slave Out GPIO pin number
+#define SER_APP_SPIM0_SS_PIN        12     // SPI Slave Select GPIO pin number
+#define SER_APP_SPIM0_RDY_PIN       14     // SPI READY GPIO pin number
+#define SER_APP_SPIM0_REQ_PIN       13     // SPI REQUEST GPIO pin number
+
+// serialization CONNECTIVITY board
+#define SER_CON_RX_PIN              13    // UART RX pin number.
+#define SER_CON_TX_PIN              12    // UART TX pin number.
+#define SER_CON_CTS_PIN             14    // UART Clear To Send pin number. Not used if HWFC is set to false.
+#define SER_CON_RTS_PIN             15    // UART Request To Send pin number. Not used if HWFC is set to false.
+
+
+#define SER_CON_SPIS_SCK_PIN        29    // SPI SCK signal.
+#define SER_CON_SPIS_MOSI_PIN       25    // SPI MOSI signal.
+#define SER_CON_SPIS_MISO_PIN       28    // SPI MISO signal.
+#define SER_CON_SPIS_CSN_PIN        12    // SPI CSN signal.
+#define SER_CON_SPIS_RDY_PIN        14    // SPI READY GPIO pin number.
+#define SER_CON_SPIS_REQ_PIN        13    // SPI REQUEST GPIO pin number.
+
+#endif // PCA10028_H
-- 
cgit v1.2.3