From b4902aa6f9bbc070d70bb843e3e4725b890e9f33 Mon Sep 17 00:00:00 2001
From: root <root@lamia.panaceas.james.local>
Date: Mon, 7 Sep 2015 12:00:55 +0100
Subject: fish

---
 bootloader/bsp/ble400.h | 112 ------------------------------------------------
 1 file changed, 112 deletions(-)
 delete mode 100644 bootloader/bsp/ble400.h

(limited to 'bootloader/bsp/ble400.h')

diff --git a/bootloader/bsp/ble400.h b/bootloader/bsp/ble400.h
deleted file mode 100644
index 4c8866b..0000000
--- a/bootloader/bsp/ble400.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is property of Nordic Semiconductor ASA.
- * Terms and conditions of usage are described in detail in NORDIC
- * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
- *
- * Licensees are granted free, non-transferable use of the information. NO
- * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
- * the file.
- *
- */
-#ifndef BLE400_H
-#define BLE400_H
-
-// LEDs definitions for BLE400
-#define LEDS_NUMBER    4
-
-#define LED_START      18
-#define LED_0          18
-#define LED_1          19
-#define LED_2          20
-#define LED_3          21
-#define LED_4          22
-#define LED_STOP       22
-
-#define LEDS_LIST { LED_0, LED_1, LED_2, LED_3, LED_4 }
-
-#define BSP_LED_0      LED_0
-#define BSP_LED_1      LED_1
-#define BSP_LED_2      LED_2
-#define BSP_LED_3      LED_3
-#define BSP_LED_4      LED_4
-
-#define BSP_LED_0_MASK (1<<BSP_LED_0)
-#define BSP_LED_1_MASK (1<<BSP_LED_1)
-#define BSP_LED_2_MASK (1<<BSP_LED_2)
-#define BSP_LED_3_MASK (1<<BSP_LED_3)
-#define BSP_LED_4_MASK (1<<BSP_LED_4)
-
-#define LEDS_MASK      (BSP_LED_0_MASK | BSP_LED_1_MASK | BSP_LED_2_MASK | BSP_LED_3_MASK | BSP_LED_4_MASK )
-/* all LEDs are lit when GPIO is low */
-#define LEDS_INV_MASK  LEDS_MASK
-
-#define BUTTONS_NUMBER 2
-
-#define BUTTON_START   16
-#define BUTTON_1       16
-#define BUTTON_2       17
-#define BUTTON_STOP    17
-#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
-
-#define BUTTONS_LIST { BUTTON_1, BUTTON_2 }
-
-#define BSP_BUTTON_0   BUTTON_1
-#define BSP_BUTTON_1   BUTTON_2
-
-#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
-#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)
-
-#define BUTTONS_MASK   (BSP_BUTTON_0_MASK|BSP_BUTTON_1_MASK)
-
-#define RX_PIN_NUMBER  11
-#define TX_PIN_NUMBER  9
-#define CTS_PIN_NUMBER 10
-#define RTS_PIN_NUMBER 8
-#define HWFC           true
-
-#if 0
-#define SPIS_MISO_PIN  28    // SPI MISO signal. 
-#define SPIS_CSN_PIN   12    // SPI CSN signal. 
-#define SPIS_MOSI_PIN  25    // SPI MOSI signal. 
-#define SPIS_SCK_PIN   29    // SPI SCK signal. 
-
-#define SPIM0_SCK_PIN       4     /**< SPI clock GPIO pin number. */
-#define SPIM0_MOSI_PIN      1     /**< SPI Master Out Slave In GPIO pin number. */
-#define SPIM0_MISO_PIN      3     /**< SPI Master In Slave Out GPIO pin number. */
-#define SPIM0_SS_PIN        2     /**< SPI Slave Select GPIO pin number. */
-
-#define SPIM1_SCK_PIN       15     /**< SPI clock GPIO pin number. */
-#define SPIM1_MOSI_PIN      12     /**< SPI Master Out Slave In GPIO pin number. */
-#define SPIM1_MISO_PIN      14     /**< SPI Master In Slave Out GPIO pin number. */
-#define SPIM1_SS_PIN        13     /**< SPI Slave Select GPIO pin number. */
-
-// serialization APPLICATION board
-#define SER_APP_RX_PIN              12    // UART RX pin number.
-#define SER_APP_TX_PIN              13    // UART TX pin number.
-#define SER_APP_CTS_PIN             15    // UART Clear To Send pin number.
-#define SER_APP_RTS_PIN             14    // UART Request To Send pin number.
-
-#define SER_APP_SPIM0_SCK_PIN       29     // SPI clock GPIO pin number.
-#define SER_APP_SPIM0_MOSI_PIN      25     // SPI Master Out Slave In GPIO pin number
-#define SER_APP_SPIM0_MISO_PIN      28     // SPI Master In Slave Out GPIO pin number
-#define SER_APP_SPIM0_SS_PIN        12     // SPI Slave Select GPIO pin number
-#define SER_APP_SPIM0_RDY_PIN       14     // SPI READY GPIO pin number
-#define SER_APP_SPIM0_REQ_PIN       13     // SPI REQUEST GPIO pin number
-
-// serialization CONNECTIVITY board
-#define SER_CON_RX_PIN              13    // UART RX pin number.
-#define SER_CON_TX_PIN              12    // UART TX pin number.
-#define SER_CON_CTS_PIN             14    // UART Clear To Send pin number. Not used if HWFC is set to false.
-#define SER_CON_RTS_PIN             15    // UART Request To Send pin number. Not used if HWFC is set to false.
-
-
-#define SER_CON_SPIS_SCK_PIN        29    // SPI SCK signal.
-#define SER_CON_SPIS_MOSI_PIN       25    // SPI MOSI signal.
-#define SER_CON_SPIS_MISO_PIN       28    // SPI MISO signal.
-#define SER_CON_SPIS_CSN_PIN        12    // SPI CSN signal.
-#define SER_CON_SPIS_RDY_PIN        14    // SPI READY GPIO pin number.
-#define SER_CON_SPIS_REQ_PIN        13    // SPI REQUEST GPIO pin number.
-#endif
-
-#endif // BLE400_H
-- 
cgit v1.2.3