/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
 *
 * The information contained herein is property of Nordic Semiconductor ASA.
 * Terms and conditions of usage are described in detail in NORDIC
 * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
 *
 * Licensees are granted free, non-transferable use of the information. NO
 * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
 * the file.
 *
 */
#ifndef BLE400_H
#define BLE400_H

// LEDs definitions for BLE400
#define LEDS_NUMBER    4

#define LED_START      18
#define LED_1          19
#define LED_2          20
#define LED_3          21
#define LED_4          22
#define LED_STOP       22

#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }

#define BSP_LED_0      LED_1
#define BSP_LED_1      LED_2
#define BSP_LED_2      LED_3
#define BSP_LED_3      LED_4

#define BSP_LED_0_MASK (1<<BSP_LED_0)
#define BSP_LED_1_MASK (1<<BSP_LED_1)
#define BSP_LED_2_MASK (1<<BSP_LED_2)
#define BSP_LED_3_MASK (1<<BSP_LED_3)

#define LEDS_MASK      (BSP_LED_0_MASK | BSP_LED_1_MASK | BSP_LED_2_MASK | BSP_LED_3_MASK)
/* all LEDs are lit when GPIO is low */
#define LEDS_INV_MASK  LEDS_MASK

#define BUTTONS_NUMBER 2

#define BUTTON_START   16
#define BUTTON_1       16
#define BUTTON_2       17
#define BUTTON_STOP    17
#define BUTTON_PULL    NRF_GPIO_PIN_PULLUP

#define BUTTONS_LIST { BUTTON_1, BUTTON_2 }

#define BSP_BUTTON_0   BUTTON_1
#define BSP_BUTTON_1   BUTTON_2

#define BSP_BUTTON_0_MASK (1<<BSP_BUTTON_0)
#define BSP_BUTTON_1_MASK (1<<BSP_BUTTON_1)

#define BUTTONS_MASK   (BSP_BUTTON_0_MASK|BSP_BUTTON_1_MASK)

#define RX_PIN_NUMBER  11
#define TX_PIN_NUMBER  9
#define CTS_PIN_NUMBER 10
#define RTS_PIN_NUMBER 8
#define HWFC           true

#if 0
#define SPIS_MISO_PIN  28    // SPI MISO signal. 
#define SPIS_CSN_PIN   12    // SPI CSN signal. 
#define SPIS_MOSI_PIN  25    // SPI MOSI signal. 
#define SPIS_SCK_PIN   29    // SPI SCK signal. 

#define SPIM0_SCK_PIN       4     /**< SPI clock GPIO pin number. */
#define SPIM0_MOSI_PIN      1     /**< SPI Master Out Slave In GPIO pin number. */
#define SPIM0_MISO_PIN      3     /**< SPI Master In Slave Out GPIO pin number. */
#define SPIM0_SS_PIN        2     /**< SPI Slave Select GPIO pin number. */

#define SPIM1_SCK_PIN       15     /**< SPI clock GPIO pin number. */
#define SPIM1_MOSI_PIN      12     /**< SPI Master Out Slave In GPIO pin number. */
#define SPIM1_MISO_PIN      14     /**< SPI Master In Slave Out GPIO pin number. */
#define SPIM1_SS_PIN        13     /**< SPI Slave Select GPIO pin number. */

// serialization APPLICATION board
#define SER_APP_RX_PIN              12    // UART RX pin number.
#define SER_APP_TX_PIN              13    // UART TX pin number.
#define SER_APP_CTS_PIN             15    // UART Clear To Send pin number.
#define SER_APP_RTS_PIN             14    // UART Request To Send pin number.

#define SER_APP_SPIM0_SCK_PIN       29     // SPI clock GPIO pin number.
#define SER_APP_SPIM0_MOSI_PIN      25     // SPI Master Out Slave In GPIO pin number
#define SER_APP_SPIM0_MISO_PIN      28     // SPI Master In Slave Out GPIO pin number
#define SER_APP_SPIM0_SS_PIN        12     // SPI Slave Select GPIO pin number
#define SER_APP_SPIM0_RDY_PIN       14     // SPI READY GPIO pin number
#define SER_APP_SPIM0_REQ_PIN       13     // SPI REQUEST GPIO pin number

// serialization CONNECTIVITY board
#define SER_CON_RX_PIN              13    // UART RX pin number.
#define SER_CON_TX_PIN              12    // UART TX pin number.
#define SER_CON_CTS_PIN             14    // UART Clear To Send pin number. Not used if HWFC is set to false.
#define SER_CON_RTS_PIN             15    // UART Request To Send pin number. Not used if HWFC is set to false.


#define SER_CON_SPIS_SCK_PIN        29    // SPI SCK signal.
#define SER_CON_SPIS_MOSI_PIN       25    // SPI MOSI signal.
#define SER_CON_SPIS_MISO_PIN       28    // SPI MISO signal.
#define SER_CON_SPIS_CSN_PIN        12    // SPI CSN signal.
#define SER_CON_SPIS_RDY_PIN        14    // SPI READY GPIO pin number.
#define SER_CON_SPIS_REQ_PIN        13    // SPI REQUEST GPIO pin number.
#endif

#endif // BLE400_H