/*
 * light weight WS2812 lib include
 *
 * Version 2.0a3  - Jan 18th 2014
 * Author: Tim (cpldcpu@gmail.com) 
 *
 * Please do not change this file! All configuration is handled in "ws2812_config.h"
 *
 * License: GNU GPL v2 (see License.txt)
 +
 */

#ifndef LIGHT_WS2812_H_
#define LIGHT_WS2812_H_

/*
 *  Structure of the LED array
 */

struct RGB
{
  uint8_t g;
  uint8_t r;
  uint8_t b;
};

/* User Interface
 * 
 * Input:
 *         ledarray:           An array of GRB data describing the LED colors
 *         number_of_leds:     The number of LEDs to write
 *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
 *
 * The functions will perform the following actions:
 *         - Set the data-out pin as output
 *         - Send out the LED data 
 *         - Wait 50µs to reset the LEDs
 */

void ws2812_setleds (struct RGB *ledarray, uint16_t number_of_leds);
void ws2812_setleds_pin (struct RGB *ledarray, uint16_t number_of_leds,
                         uint8_t pinmask);

/* 
 * Old interface / Internal functions
 *
 * The functions take a byte-array and send to the data output as WS2812 bitstream.
 * The length is the number of bytes to send - three per LED.
 */

void ws2812_sendarray (uint8_t * array, uint16_t length);
void ws2812_sendarray_mask (uint8_t * array, uint16_t length,
                            uint8_t pinmask);


/*
 * Internal defines
 */

#define CONCAT(a, b)            a ## b
#define CONCAT_EXP(a, b)   CONCAT(a, b)


#endif /* LIGHT_WS2812_H_ */