.\" Manual page for plpftp .\" $Id$ .\" CHECKIN $Date$ .\" .\" Process this file with .\" groff -man -Tascii plpftp.1 for ASCII output, or .\" groff -man -Tps plpftp.1 for Postscript output .\" .TH plpftp 1 "@MANDATE@" "plptools @VERSION@" "User commands" .SH NAME plpftp \- FTP-like program for manipulating files on the Psion. .SH SYNOPSIS .B plpftp .B [-h] .B [-V] .BI "[-p [" host :] port ] .BI [ long-options ] .BI "[ " FTP-command " [" parameters ]] .SH DESCRIPTION plpftp provides an FTP style interface for the psion. It requires the ncpd to be running already to provide access to the serial port. plpftp has online help. To see the available commands start the program and enter "help". .SH OPTIONS .TP .B \-V, --version Display the version and exit .TP .B \-h, --help Display a short help text and exit. .TP .BI "\-p, --port=[" host :] port Specify the host and port to connect to (e.g. The port where ncpd is listening on) - by default the host is 127.0.0.1 and the port is looked up in /etc/services. If it is not found there, a builtin value of @DPORT@ is used. .TP .I FTP-command parameters Allows you to specify an plpftp command on the command line. If specified, plpftp enters non interactive mode and terminates after executing the command. .SH SEE ALSO ncpd(8), plpnfsd(8), plpprintd(8), plpftp(1) and sisinstall(1) .SH AUTHOR Fritz Elfert Heavily based on p3nfsd by Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de) and plp_1_7 by Philip Proudman (phil@proudman51.freeserve.co.uk) Man page by John Lines (john+plpman@paladin.demon.co.uk)