From c948b8c0d5d4069a2e4cd492e759fd1135a27154 Mon Sep 17 00:00:00 2001 From: Reuben Thomas Date: Fri, 18 Jul 2014 22:31:34 +0100 Subject: Update and overhaul Debian packaging --- debian/plptools.templates | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'debian/plptools.templates') diff --git a/debian/plptools.templates b/debian/plptools.templates index 11ff6cb..8245555 100644 --- a/debian/plptools.templates +++ b/debian/plptools.templates @@ -5,7 +5,7 @@ _Description: Customize /etc/default/plptools daemons: . plpfuse (for mounting a Psion's drives using Filesystem in USErspace) - plpprintd (for printing via PC from a Psion Series 5) + plpprintd (for printing via PC from an EPOC32 machine) . Both daemons are disabled by default. You can enable them by editing /etc/default/plptools. @@ -22,14 +22,14 @@ _Description: Should ncpd be started during boot? Template: plptools/ncpd/serial Type: string Default: /dev/ttyS0 -_Description: Specify serial line to be used +_Description: Serial line to use: By default, the Psion is expected to be connected to the first serial line (COM1:) of your machine. You can change this here. Template: plptools/ncpd/listenat Type: string Default: 127.0.0.1 -_Description: Specify the IP address and port for ncpd +_Description: IP address and port for ncpd: If you intend to use the plptools front-ends from other machines, you can specify 0.0.0.0 or the IP address of your machine here. Normal users should keep the default 127.0.0.1! @@ -59,13 +59,13 @@ _Description: Should plpprintd be started during boot? Template: plptools/plpprintd/printqueue Type: string Default: psion -_Description: Specify the print queue to be used +_Description: Print queue to use: Please enter the name of the print queue you want to use for printing from the Psion. Template: plptools/frontends/remoteaddr Type: string -_Description: Specify remote host to be contacted +_Description: Remote host to be contacted: Since you have ncpd either disabled or listening on a non-standard address, you should specify the address for the frontends again. -- cgit v1.2.3