diff options
-rw-r--r-- | Makefile.include | 10 | ||||
-rw-r--r-- | Makefile.rules | 18 | ||||
-rw-r--r-- | app/Makefile (renamed from src/Makefile) | 7 | ||||
-rw-r--r-- | app/dfu.c (renamed from src/dfu.c) | 38 | ||||
-rw-r--r-- | app/keyboard.c (renamed from src/keyboard.c) | 0 | ||||
-rw-r--r-- | app/kvm.c (renamed from src/kvm.c) | 12 | ||||
-rw-r--r-- | app/kvm.ld | 43 | ||||
-rw-r--r-- | app/main.c (renamed from src/main.c) | 4 | ||||
-rw-r--r-- | app/mouse.c (renamed from src/mouse.c) | 0 | ||||
-rw-r--r-- | app/project.h (renamed from src/project.h) | 0 | ||||
-rw-r--r-- | app/prototypes.h (renamed from src/prototypes.h) | 0 | ||||
-rw-r--r-- | app/ring.c (renamed from src/ring.c) | 0 | ||||
-rw-r--r-- | app/ring.h (renamed from src/ring.h) | 0 | ||||
-rw-r--r-- | app/tablet.c (renamed from src/tablet.c) | 0 | ||||
-rw-r--r-- | app/usart.c (renamed from src/usart.c) | 2 | ||||
-rw-r--r-- | app/usb.c (renamed from src/usb.c) | 0 | ||||
-rw-r--r-- | board/STM32F103R_BOARD.cfg | 3 | ||||
-rw-r--r-- | boot/Makefile | 32 | ||||
-rw-r--r-- | boot/project.h | 23 | ||||
-rw-r--r-- | boot/prototypes.h | 18 | ||||
-rw-r--r-- | boot/usbdfu.c | 288 | ||||
-rw-r--r-- | boot/usbdfu.ld (renamed from src/kvm.ld) | 9 | ||||
-rw-r--r-- | interface/j-link.cfg | 5 |
23 files changed, 485 insertions, 27 deletions
diff --git a/Makefile.include b/Makefile.include index adfecf6..3eccc25 100644 --- a/Makefile.include +++ b/Makefile.include @@ -27,9 +27,13 @@ ARCH_FLAGS = -mthumb -mcpu=cortex-m3 $(FP_FLAGS) -mfix-cortex-m3-ldrd ################################################################################ # OpenOCD specific variables -OOCD ?= openocd -OOCD_INTERFACE ?= flossjtag -OOCD_BOARD ?= olimex_stm32_h103 +#OOCD ?= openocd +#OOCD_INTERFACE ?= flossjtag +#OOCD_BOARD ?= olimex_stm32_h103 + +OOCD ?= openocd +OOCD_INTERFACE ?= ../interface/j-link.cfg +OOCD_BOARD ?= ../board/STM32F103R_BOARD.cfg ################################################################################ # Black Magic Probe specific variables diff --git a/Makefile.rules b/Makefile.rules index b67e343..73bdf20 100644 --- a/Makefile.rules +++ b/Makefile.rules @@ -123,7 +123,7 @@ LDLIBS += -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group ############################################################################### ############################################################################### -.SUFFIXES: .elf .bin .hex .srec .list .map .images +.SUFFIXES: .elf .bin .hex .srec .list .map .images .dfu .SECONDEXPANSION: .SECONDARY: @@ -138,7 +138,7 @@ list: $(BINARY).list images: $(BINARY).images flash: $(BINARY).flash -%.images: %.bin %.hex %.srec %.list %.map +%.images: %.bin %.hex %.srec %.list %.map %.dfu @#printf "*** $* images generated ***\n" %.bin: %.elf @@ -149,6 +149,10 @@ flash: $(BINARY).flash @#printf " OBJCOPY $(*).hex\n" $(Q)$(OBJCOPY) -Oihex $(*).elf $(*).hex +%.dfu: %.elf + @#printf " OBJCOPY $(*).dfu\n" + $(Q)$(OBJCOPY) -Obinary $(*).elf $(*).dfu + %.srec: %.elf @#printf " OBJCOPY $(*).srec\n" $(Q)$(OBJCOPY) -Osrec $(*).elf $(*).srec @@ -179,7 +183,7 @@ fish: clean: @#printf " CLEAN\n" - $(Q)$(RM) *.o *.d *.elf *.bin *.hex *.srec *.list *.map *~ + $(Q)$(RM) *.o *.d *.elf *.bin *.hex *.srec *.list *.map *~ *.dfu stylecheck: $(STYLECHECKFILES:=.stylecheck) styleclean: $(STYLECHECKFILES:=.styleclean) @@ -207,8 +211,8 @@ ifeq ($(OOCD_SERIAL),) %.flash: %.hex @printf " FLASH $<\n" @# IMPORTANT: Don't use "resume", only "reset" will work correctly! - $(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \ - -f board/$(OOCD_BOARD).cfg \ + $(Q)$(OOCD) -f $(OOCD_INTERFACE) \ + -f $(OOCD_BOARD) \ -c "init" -c "reset init" \ -c "flash write_image erase $(*).hex" \ -c "reset" \ @@ -217,8 +221,8 @@ else %.flash: %.hex @printf " FLASH $<\n" @# IMPORTANT: Don't use "resume", only "reset" will work correctly! - $(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \ - -f board/$(OOCD_BOARD).cfg \ + $(Q)$(OOCD) -f $(OOCD_INTERFACE) \ + -f $(OOCD_BOARD) \ -c "ft2232_serial $(OOCD_SERIAL)" \ -c "init" -c "reset init" \ -c "flash write_image erase $(*).hex" \ diff --git a/src/Makefile b/app/Makefile index f7f445a..08febc7 100644 --- a/src/Makefile +++ b/app/Makefile @@ -29,10 +29,15 @@ CSRCS=dfu.c mouse.c keyboard.c main.c usb.c tablet.c usart.c kvm.c ring.c BINARY = ${PROG} OBJS = ${CSRCS:%.c=%.o} +${PROG}.dfu:${PROG}.elf + ${OBJCOPY} -Obinary $< $@ + +dfu:${PROG}.dfu + dfu-util -R -a 0 -d 1d6b:0ee3 -s 0x08002000:leave -D $< program: ${PROG}.elf echo halt | nc -t localhost 4444 - echo flash write_image erase ${PWD}/$< | nc -t localhost 4444 + echo flash write_image erase ${PWD}/$< 0x2000 | nc -t localhost 4444 echo reset run | nc -t localhost 4444 protos: @@ -2,10 +2,12 @@ #ifdef INCLUDE_DFU_INTERFACE +extern uint32_t dfu_flag; + const struct usb_dfu_descriptor dfu_function = { .bLength = sizeof (struct usb_dfu_descriptor), .bDescriptorType = DFU_FUNCTIONAL, - .bmAttributes = USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, + .bmAttributes = USB_DFU_CAN_DOWNLOAD, .wDetachTimeout = 255, .wTransferSize = 1024, .bcdDFUVersion = 0x011A, @@ -33,10 +35,8 @@ dfu_detach_complete (usbd_device * usbd_dev, struct usb_setup_data *req) (void) req; (void) usbd_dev; - gpio_set_mode (GPIOA, GPIO_MODE_INPUT, 0, GPIO15); - gpio_set_mode (GPIOA, GPIO_MODE_OUTPUT_2_MHZ, - GPIO_CNF_OUTPUT_PUSHPULL, GPIO10); - gpio_set (GPIOA, GPIO10); + dfu_flag = 0xfee1dead; + scb_reset_core (); } @@ -50,11 +50,33 @@ dfu_control_request (usbd_device * usbd_dev, struct usb_setup_data *req, (void) len; (void) usbd_dev; - if ((req->bmRequestType != 0x21) || (req->bRequest != DFU_DETACH)) + if ((req->bmRequestType & 0x7F) != 0x21) return 0; /* Only accept class request. */ - *complete = dfu_detach_complete; + switch (req->bRequest) + { + case DFU_GETSTATUS: + { + (*buf)[0] = DFU_STATUS_OK; + (*buf)[1] = 0; + (*buf)[2] = 0; + (*buf)[3] = 0; + (*buf)[4] = STATE_APP_IDLE; + (*buf)[5] = 0; /* iString not used here */ + *len = 6; + return 1; + } + case DFU_GETSTATE: + /* Return state with no state transision. */ + *buf[0] = STATE_APP_IDLE; + *len = 1; + return 1; + case DFU_DETACH: + *complete = dfu_detach_complete; + return 1; + } + + return 0; - return 1; } #endif diff --git a/src/keyboard.c b/app/keyboard.c index e9046a3..e9046a3 100644 --- a/src/keyboard.c +++ b/app/keyboard.c @@ -21,13 +21,13 @@ void kvm_dispatch (void) { #if 0 - printf - ("Addr %d, Write to ep %x, %d bytes %02x %02x %02x %02x ...\r\n", - addr, endpoint, len, buf[0], buf[1], buf[2], buf[3]); + printf + ("Addr %d, Write to ep %x, %d bytes %02x %02x %02x %02x ...\r\n", + addr, endpoint, len, buf[0], buf[1], buf[2], buf[3]); #endif - if(len) - usbd_ep_write_packet (usbd_dev, endpoint, buf, len); + if (len) + usbd_ep_write_packet (usbd_dev, endpoint, buf, len); } void @@ -52,7 +52,7 @@ kvm_recv (uint8_t d) { case STATE_SYNC: if (d != 0x5a) - break; + break; state = STATE_ADDR; break; case STATE_ENDPOINT: diff --git a/app/kvm.ld b/app/kvm.ld new file mode 100644 index 0000000..a2d5a9c --- /dev/null +++ b/app/kvm.ld @@ -0,0 +1,43 @@ +/* + * This file is part of the libopencm3 project. + * + * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> + * + * This library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */ + +/* Define memory regions. */ +MEMORY +{ + rom (rx) : ORIGIN = 0x08002000, LENGTH = 120K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K +} + +/* Include the common ld script. */ +INCLUDE libopencm3_stm32f1.ld + +dfu_shared_location = ORIGIN(ram) + LENGTH(ram) - 1024; + +/* PROVIDE(_stack = dfu_shared_location ); */ + +SECTIONS +{ + .dfu_shared dfu_shared_location :{ + dfu_flag = .; + } +} + + @@ -1,4 +1,5 @@ #include "project.h" +extern uint32_t dfu_flag; void sys_tick_handler (void) @@ -47,7 +48,8 @@ main (void) gpio_clear (GPIOC, GPIO11); - printf ("Hello world\r\n"); + printf ("Hello world main=%p\r\n", main); + printf ("dfu_flag=%08lx\r\n", dfu_flag); usb_run (); diff --git a/src/mouse.c b/app/mouse.c index 6e0a207..6e0a207 100644 --- a/src/mouse.c +++ b/app/mouse.c diff --git a/src/project.h b/app/project.h index 0323569..0323569 100644 --- a/src/project.h +++ b/app/project.h diff --git a/src/prototypes.h b/app/prototypes.h index 0e971df..0e971df 100644 --- a/src/prototypes.h +++ b/app/prototypes.h diff --git a/src/tablet.c b/app/tablet.c index 1073b37..1073b37 100644 --- a/src/tablet.c +++ b/app/tablet.c diff --git a/src/usart.c b/app/usart.c index b0ea2a4..f510682 100644 --- a/src/usart.c +++ b/app/usart.c @@ -62,7 +62,7 @@ _write (int file, char *ptr, int len) void usart_queue (uint8_t d) { - ring_write_byte(&output_ring,d); + ring_write_byte (&output_ring, d); USART_CR1 (USART1) |= USART_CR1_TXEIE; #if 0 diff --git a/board/STM32F103R_BOARD.cfg b/board/STM32F103R_BOARD.cfg new file mode 100644 index 0000000..6d1d72b --- /dev/null +++ b/board/STM32F103R_BOARD.cfg @@ -0,0 +1,3 @@ +# + +source [find target/stm32f1x.cfg] diff --git a/boot/Makefile b/boot/Makefile new file mode 100644 index 0000000..679662b --- /dev/null +++ b/boot/Makefile @@ -0,0 +1,32 @@ +## +## This file is part of the libopencm3 project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This library is free software: you can redistribute it and/or modify +## it under the terms of the GNU Lesser General Public License as published by +## the Free Software Foundation, either version 3 of the License, or +## (at your option) any later version. +## +## This library is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU Lesser General Public License for more details. +## +## You should have received a copy of the GNU Lesser General Public License +## along with this library. If not, see <http://www.gnu.org/licenses/>. +## + + +CSRCS=usbdfu.c +PROG = usbdfu + +CPROTO=cproto +V=1 +BINARY = ${PROG} +OBJS = ${CSRCS:%.c=%.o} + +include ../Makefile.include + +CFLAGS += -g + diff --git a/boot/project.h b/boot/project.h new file mode 100644 index 0000000..0323569 --- /dev/null +++ b/boot/project.h @@ -0,0 +1,23 @@ +#include <stdlib.h> +#include <libopencm3/stm32/rcc.h> +#include <libopencm3/stm32/gpio.h> +#include <libopencm3/stm32/usart.h> +#include <libopencm3/cm3/systick.h> +#include <libopencm3/cm3/nvic.h> +#include <libopencm3/usb/usbd.h> +#include <libopencm3/usb/hid.h> + +#define INCLUDE_DFU_INTERFACE + + +#ifdef INCLUDE_DFU_INTERFACE +#include <libopencm3/cm3/scb.h> +#include <libopencm3/usb/dfu.h> +#endif + +#include <stdio.h> +#include <errno.h> + +#include "ring.h" + +#include "prototypes.h" diff --git a/boot/prototypes.h b/boot/prototypes.h new file mode 100644 index 0000000..45d399c --- /dev/null +++ b/boot/prototypes.h @@ -0,0 +1,18 @@ +/* usbdfu.c */ +extern uint8_t usbd_control_buffer[1024]; +extern const struct usb_device_descriptor dev; +extern const struct usb_dfu_descriptor dfu_function; +extern const struct usb_interface_descriptor iface; +extern const struct usb_interface ifaces[]; +extern const struct usb_config_descriptor config; +extern int main(void); +/* ring.c */ +extern void ring_init(ring_t *r, uint8_t *buf, size_t len); +extern int ring_write_byte(ring_t *r, uint8_t c); +extern int ring_read_byte(ring_t *r, uint8_t *c); +extern int ring_write(ring_t *r, uint8_t *buf, size_t len); +/* usart.c */ +extern void usart1_isr(void); +extern int _write(int file, char *ptr, int len); +extern void usart_queue(uint8_t d); +extern void usart_init(void); diff --git a/boot/usbdfu.c b/boot/usbdfu.c new file mode 100644 index 0000000..33d48ec --- /dev/null +++ b/boot/usbdfu.c @@ -0,0 +1,288 @@ +/* + * This file is part of the libopencm3 project. + * + * Copyright (C) 2010 Gareth McMullin <gareth@blacksphere.co.nz> + * + * This library is free software: you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <string.h> +#include <libopencm3/stm32/rcc.h> +#include <libopencm3/stm32/gpio.h> +#include <libopencm3/stm32/flash.h> +#include <libopencm3/cm3/scb.h> +#include <libopencm3/usb/usbd.h> +#include <libopencm3/usb/dfu.h> + +#define APP_ADDRESS 0x08002000 + +/* Commands sent with wBlockNum == 0 as per ST implementation. */ +#define CMD_SETADDR 0x21 +#define CMD_ERASE 0x41 + +void usb_set_config (usbd_device * usbd_dev, uint16_t wValue); + +/* We need a special large control buffer for this device: */ +uint8_t usbd_control_buffer[1024]; + +static enum dfu_state usbdfu_state = STATE_DFU_IDLE; + +extern uint32_t dfu_flag; + +static struct { + uint8_t buf[sizeof(usbd_control_buffer)]; + uint16_t len; + uint32_t addr; + uint16_t blocknum; +} prog; + +const struct usb_device_descriptor dev = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .idVendor = 0x1d6b, + .idProduct = 0x0ee3, + .bcdDevice = 0x0200, + .iManufacturer = 1, + .iProduct = 2, + .iSerialNumber = 3, + .bNumConfigurations = 1, +}; + +const struct usb_dfu_descriptor dfu_function = { + .bLength = sizeof(struct usb_dfu_descriptor), + .bDescriptorType = DFU_FUNCTIONAL, + .bmAttributes = USB_DFU_CAN_DOWNLOAD, + .wDetachTimeout = 255, + .wTransferSize = 1024, + .bcdDFUVersion = 0x011A, +}; + +const struct usb_interface_descriptor iface = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = 0xFE, /* Device Firmware Upgrade */ + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 2, + + /* The ST Microelectronics DfuSe application needs this string. + * The format isn't documented... */ + .iInterface = 4, + + .extra = &dfu_function, + .extralen = sizeof(dfu_function), +}; + +const struct usb_interface ifaces[] = {{ + .num_altsetting = 1, + .altsetting = &iface, +}}; + +const struct usb_config_descriptor config = { + .bLength = USB_DT_CONFIGURATION_SIZE, + .bDescriptorType = USB_DT_CONFIGURATION, + .wTotalLength = 0, + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0xC0, + .bMaxPower = 0x32, + + .interface = ifaces, +}; + +static const char *usb_strings[] = { + "Cabbages are good for you", + "fish", + "soup", + /* This string is used by ST Microelectronics' DfuSe utility. */ + "@Internal Flash /0x08000000/8*001Ka,56*001Kg", +}; + +static uint8_t usbdfu_getstatus(usbd_device *usbd_dev, uint32_t *bwPollTimeout) +{ + (void)usbd_dev; + + switch (usbdfu_state) { + case STATE_DFU_DNLOAD_SYNC: + usbdfu_state = STATE_DFU_DNBUSY; + *bwPollTimeout = 100; + return DFU_STATUS_OK; + case STATE_DFU_MANIFEST_SYNC: + /* Device will reset when read is complete. */ + usbdfu_state = STATE_DFU_MANIFEST; + return DFU_STATUS_OK; + default: + return DFU_STATUS_OK; + } +} + +static void usbdfu_getstatus_complete(usbd_device *usbd_dev, struct usb_setup_data *req) +{ + int i; + (void)req; + (void)usbd_dev; + + switch (usbdfu_state) { + case STATE_DFU_DNBUSY: + flash_unlock(); + if (prog.blocknum == 0) { + switch (prog.buf[0]) { + case CMD_ERASE: + { + uint32_t *dat = (uint32_t *)(prog.buf + 1); + flash_erase_page(*dat); + } + case CMD_SETADDR: + { + uint32_t *dat = (uint32_t *)(prog.buf + 1); + prog.addr = *dat; + } + } + } else { + uint32_t baseaddr = prog.addr + ((prog.blocknum - 2) * + dfu_function.wTransferSize); + for (i = 0; i < prog.len; i += 2) { + uint16_t *dat = (uint16_t *)(prog.buf + i); + flash_program_half_word(baseaddr + i, + *dat); + } + } + flash_lock(); + + /* Jump straight to dfuDNLOAD-IDLE, skipping dfuDNLOAD-SYNC. */ + usbdfu_state = STATE_DFU_DNLOAD_IDLE; + return; + case STATE_DFU_MANIFEST: + /* USB device must detach, we just reset... */ + scb_reset_system(); + return; /* Will never return. */ + default: + return; + } +} + +static int usbdfu_control_request(usbd_device *usbd_dev, struct usb_setup_data *req, uint8_t **buf, + uint16_t *len, void (**complete)(usbd_device *usbd_dev, struct usb_setup_data *req)) +{ + + if ((req->bmRequestType & 0x7F) != 0x21) + return 0; /* Only accept class request. */ + + switch (req->bRequest) { + case DFU_DNLOAD: + if ((len == NULL) || (*len == 0)) { + usbdfu_state = STATE_DFU_MANIFEST_SYNC; + return 1; + } else { + /* Copy download data for use on GET_STATUS. */ + prog.blocknum = req->wValue; + prog.len = *len; + memcpy(prog.buf, *buf, *len); + usbdfu_state = STATE_DFU_DNLOAD_SYNC; + return 1; + } + case DFU_CLRSTATUS: + /* Clear error and return to dfuIDLE. */ + if (usbdfu_state == STATE_DFU_ERROR) + usbdfu_state = STATE_DFU_IDLE; + return 1; + case DFU_ABORT: + /* Abort returns to dfuIDLE state. */ + usbdfu_state = STATE_DFU_IDLE; + return 1; + case DFU_UPLOAD: + /* Upload not supported for now. */ + return 0; + case DFU_GETSTATUS: { + uint32_t bwPollTimeout = 0; /* 24-bit integer in DFU class spec */ + (*buf)[0] = usbdfu_getstatus(usbd_dev, &bwPollTimeout); + (*buf)[1] = bwPollTimeout & 0xFF; + (*buf)[2] = (bwPollTimeout >> 8) & 0xFF; + (*buf)[3] = (bwPollTimeout >> 16) & 0xFF; + (*buf)[4] = usbdfu_state; + (*buf)[5] = 0; /* iString not used here */ + *len = 6; + *complete = usbdfu_getstatus_complete; + return 1; + } + case DFU_GETSTATE: + /* Return state with no state transision. */ + *buf[0] = usbdfu_state; + *len = 1; + return 1; + } + + return 0; +} + +void +usb_set_config (usbd_device * usbd_dev, uint16_t wValue) +{ + (void) wValue; + (void) usbd_dev; + + usbd_register_control_callback( + usbd_dev, + USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE, + USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT, + usbdfu_control_request); + +} + +int main(void) +{ + usbd_device *usbd_dev; + + rcc_periph_clock_enable(RCC_GPIOA); + + if (dfu_flag!=0xfee1dead) { + /* Boot the application if it's valid. */ + if ((*(volatile uint32_t *)APP_ADDRESS & 0x2FFE0000) == 0x20000000) { + /* Set vector table base address. */ + SCB_VTOR = APP_ADDRESS & 0xFFFF; + /* Initialise master stack pointer. */ + asm volatile("msr msp, %0"::"g" + (*(volatile uint32_t *)APP_ADDRESS)); + /* Jump to application. */ + (*(void (**)())(APP_ADDRESS + 4))(); + } + } + + dfu_flag=0; + + rcc_clock_setup_in_hsi_out_48mhz(); + + rcc_periph_clock_enable(RCC_GPIOC); + + gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ, + GPIO_CNF_OUTPUT_PUSHPULL, GPIO11); + gpio_set(GPIOC, GPIO11); + + usbd_dev = usbd_init(&stm32f103_usb_driver, &dev, &config, usb_strings, 4, usbd_control_buffer, sizeof(usbd_control_buffer)); + + usbd_register_set_config_callback (usbd_dev, usb_set_config); + + gpio_clear(GPIOC, GPIO11); + + while (1) + usbd_poll(usbd_dev); +} diff --git a/src/kvm.ld b/boot/usbdfu.ld index e15beca..8680dc9 100644 --- a/src/kvm.ld +++ b/boot/usbdfu.ld @@ -29,3 +29,12 @@ MEMORY /* Include the common ld script. */ INCLUDE libopencm3_stm32f1.ld +dfu_shared_location = ORIGIN(ram) + LENGTH(ram) - 1024; + +SECTIONS +{ + .dfu_shared dfu_shared_location :{ + dfu_flag = .; + } +} + diff --git a/interface/j-link.cfg b/interface/j-link.cfg new file mode 100644 index 0000000..3e95768 --- /dev/null +++ b/interface/j-link.cfg @@ -0,0 +1,5 @@ +# +telnet_port 4444 +gdb_port 3333 + +source [find interface/jlink.cfg] |